Related
Hi.
I can't get the VoIP to work with my Kaiser.
No problem getting it to work with my Hermes.
I have downloaded and installed the file:
"VOIP Drivers"
"MajikVoIP"
and I'm using Schaps VoIP Config tool.
I can get the device to connect to the SIP server, and it will show in the home screen as "selected"
however, whenever I try to make a call, I get the error : "Network Service not available. Try again later" or some other messages about how the connection can't go through
The SIP account is set up to only accept g711 (either ulaw or alaw).
Has anyone experienced that problem as well ?
What did you do to activate VoIP on your Kaiser?
Thank you
Jean-Yves
Bump!
Decided to install VoIP to. But whatever I do I get the same error/message. I tried a WIFI and G3/GRPS connections, I tried VoIP Buster and our Company (Swyx) IPPBX and the alle result in the Network service not available message.
I tried the same accounts on my Wizard and the work flawlessly.
Anybody can shed any light on this matter? As far as all the other other threads go VoIP should work without any problems.
TIA, cheers,
Cacti
Same problem here
I tried many different solutions from different threads. I even managed to get the call another phone using VOIP (VOIPbuster network), but the other phone could not hear me and I could not hear the other....
I used different cab files like MajikVOIP and WM6VoIP, but no configuration works. I even tried different IPDialplans, but no avail...
Hopefully someone could shed light on this issue.
Oh, my ROM is the original UK rom...
actually, different problems.
@jyavenard/le_cactus: does it work over WiFi? If there is a block or proxy then WiFi should work. TMO is known to actively block VoIP on their European network.
@epoot: your issue is something altogether different and not easily answered since in-call audio loss isn't fully understood yet. I suspect its bandwidth/codec related and have done testing which supports this theory, but I have yet to produce a working low-bandwidth codec due to logic troubleshooting difficulties.
Hi Sleuth,
Thanks for your response, strangely enough I looked at my profile and it seems that I am from the US. Well maybe I created this account when I was travelling, but I am living in the Netherlands using the operator Orange with a non-branded HTC Kaiser (bought it without subscription).
I am testing VOIP over Wifi and have tried the different configurations found in the different threads of this forum. Never got it to work though...
So the proxy issue you mention does not affect me, I think? It might be another problem...
In one configuration with certain cabs from one of the forums, I kept getting the searching... status and VOIP did not work. In the other got the message: Network service not available...
In antoher configuration I finally managed to call someone, but no audio from both ends...
I was hoping to find a walkthrough of a successfull VOIP installation on an orginal UK rom...
Cheers,
Edwin
wierd, I could've sworn the OP's info was US/albania not yours epoot... Sorry for the confusion, I've edited my previous post for clarification.
I've installed the TNT VoIP cab available in the cabs thread. After I removed my AT&T hidden proxy along with the two port restriction entries in hklm\comm\rtc\adaptertypes I was able to connect just fine over 3G with both-way audio. My only issue is that sound plays out the back speaker instead of my Tilt's earpiece speaker.
VOIP internal speaker
I've finally gotten VOIP to work using the MajikVOIP.cab and VOIPdrivers.cab. Now all the sounds is coming out of the external speakers. Anyway to re-route this to the internal speakers? Great forum!
Sleuth255 said:
wierd, I could've sworn the OP's info was US/albania not yours epoot... Sorry for the confusion, I've edited my previous post for clarification.
I've installed the TNT VoIP cab available in the cabs thread. After I removed my AT&T hidden proxy along with the two port restriction entries in hklm\comm\rtc\adaptertypes I was able to connect just fine over 3G with both-way audio. My only issue is that sound plays out the back speaker instead of my Tilt's earpiece speaker.
Click to expand...
Click to collapse
Hi sleuth. I am using Tmobile from the Netherlands with an unlimited 3G plan. i was wondering if u can tell me where i can find the Tmobile's hidden proxy ( if there is 1) and how to modify/edit the hklm\comm\rtc\adaptertypes in order to use my Tmobile 3G network for VOIP. What i see is that the string value is set to default. Atm i am using ur VOIP cab with VOIPCHEAP, which works fine over WIFI..but getting disconnected if i want to use it over Tmobile's 3G.
thank you in advance.
Tommy
try using www.fring.com, it's very easy to setup and works ok.
I've tested fring too.
Did the sound in your case come out of the loudspeaker or on the earphone?
the sound is coming from earphone.
dt11 said:
the sound is coming from earphone.
Click to expand...
Click to collapse
are u sure? my old fring version gives sound from the speakerphones and yesterday i downloaded the newest fring version for my tytnII, which gave the same result..sound from the rear speakers. could u try to set ur volume on max and then listen again..cuz when u set at low volume it could also sound like it comes from the earphone. I've used skype, fring and sleuth kaiserVOIP.cab ..all with the same result.
AGEphone Mobile 2.5 Speakerphone Edition supports the internal speaker on the Kaiser and a range of other HTC devices (with more to come)!
Firstly, a big thank you to all contributors here, for the first time I thought I would contact HTC re problems with the diamond and believe me, I won't ever bother again with HTC support.
Over the years I've had many HTC devices and like many people here, have a strong understanding on subjects like push email. I just can't believe how difficult it is to talk to anyone from support areas regarding issues. I just thought HTC technical dept may be different, but sadly they are not.
The issues I have are (they have been discussed before but the threads have died with no solution)
1) Bluetooth headset, when disconnecting causes the Diamond to loose abilty to make any sound, be it ringing, alarm or music. This is random and only a soft reset cures the problem.
HTC response, Only HTC branded bluetooth devices are supported, tough!
2) Push E-mail, randomly forgets to check back with the server to see if their is a conenction and if not re-establish one. Logs show the device goes into sleep mode and is woke say 8 mins later (does change due to heartbeat interval changing) to ping server. however, its not waking. So I had a situation when the last server communication was 6am, and by the time I noticed I wasn't getting any mail 6 hours had past! Activesync on the device still show connected!!!
HTC response, clearly its your connection settings with your email. Hard reset and try again. Cant be our software.
Any ideas guys, I'm loosing the plot here. The handset is so much smaller and lighter than my kaiser, but I never had these issues.
P.S. I would never have bought another HTC device again if it wasn't for XDA. This forum has helped me so much over the years and also tought me the joys of WinMob!! HTC should be paying you guys!!
Bump:
Anyone else suffering from these problems? Push email is particularly frustrating.
I have this problem too. The answer from HTC is wrong because bluetooth is an universal standard and , is no reason to say to use only HTC bluetooth devices. Bluetooth should mean compatibility with all bluetooth devices . Another stupid answer from HTC.... Anybody to help us ...?
flashflash said:
Firstly, a big thank you to all contributors here, for the first time I thought I would contact HTC re problems with the diamond and believe me, I won't ever bother again with HTC support.
Over the years I've had many HTC devices and like many people here, have a strong understanding on subjects like push email. I just can't believe how difficult it is to talk to anyone from support areas regarding issues. I just thought HTC technical dept may be different, but sadly they are not.
The issues I have are (they have been discussed before but the threads have died with no solution)
1) Bluetooth headset, when disconnecting causes the Diamond to loose abilty to make any sound, be it ringing, alarm or music. This is random and only a soft reset cures the problem.
HTC response, Only HTC branded bluetooth devices are supported, tough!
2) Push E-mail, randomly forgets to check back with the server to see if their is a conenction and if not re-establish one. Logs show the device goes into sleep mode and is woke say 8 mins later (does change due to heartbeat interval changing) to ping server. however, its not waking. So I had a situation when the last server communication was 6am, and by the time I noticed I wasn't getting any mail 6 hours had past! Activesync on the device still show connected!!!
HTC response, clearly its your connection settings with your email. Hard reset and try again. Cant be our software.
Any ideas guys, I'm loosing the plot here. The handset is so much smaller and lighter than my kaiser, but I never had these issues.
P.S. I would never have bought another HTC device again if it wasn't for XDA. This forum has helped me so much over the years and also tought me the joys of WinMob!! HTC should be paying you guys!!
Click to expand...
Click to collapse
I currently don't use BT headset anymore. However, before using Diamond, I use the HTC Touch Elf with A2DPTOGGLE http://www.teksoftco.com/forum/viewtopic.php?t=1626
It can switch between BT headset or speaker. I tried beforeWM will not automatically switch between them. I know there is problem using the same A2DPTOGGLE in Diamond, because it is a Today plug-in and Diamind hide the Today from TouchFLO 3D. You may try to use "Second Today" together with the A2DPTOGGLE to fix your issue.
Another issue with your pushmail (via GPRS), I constantly working with pushmail and there is no missing mail. there are 2 things you may need to take into account.
1) check your peak or non-peak time. if you need to constantly receive mail immediately in 7x24, you need to set non-peak time also "arrive immediately". something like that.
2) apperantly, WM will save battery when device in sleep mode, WI-FI will deactivated. if you use WI-FI to work with pushmail, you may need some registry settings (i dunno which registry to control this) to disable such energy saving capability. Or, use normal GPRS or 3G data connectivity to test.
P.S. I hate to be the support of HTC product, but seems HTC have well-known bad after sales service.
Using adv. config. I disabled ,,joint stereo'' . I have no problems with ''no sound'' after using BT headset anymore. Can somebody else to confirm this ?
emilceteras said:
Using adv. config. I disabled ,,joint stereo'' . I have no problems with ''no sound'' after using BT headset anymore. Can somebody else to confirm this ?
Click to expand...
Click to collapse
I've tried but doesn't work, this problem's still here
Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
plaver said:
Hi People, I've been away from PDA's for while, realized the error of my ways and picked-up o2 Stellar at the weekend, the 2nd one in week. Before doing anything I installed WIN 6.1,everything appeared to working fine, until I tried to transfer files from my N95 to the stellar via bluetooth, every time I tried I got the same error 'unable to connect, I can pair with any phone tried 4 different phones today and I can send from my phone to another but can't receive files. I have double checked all my settings they seem to OK so I'm at a loss. Before I take it back for a 3rd has anyone else here had the same problem or know what I'm doing wrong.
Any help and advice would be much appreciated.
ROM details as follows
ROM Version 3.29.206.0.WWE
05/09/08
Radio Verson 25.83.40.02W
BlueTooth Verson 2.0/2.0+EDR
Windows Mobile 6.1 Pro.
Click to expand...
Click to collapse
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
nufsaid said:
I had a similar problem with a bluetooth dongle.
Start/Settings/Connections/Beam/Recieve all incoming beams. Make sure BT filesharing is turned on the phone (if you fileshare), also make visible. BT can be spotty sometimes and these settings can be reset to default if the phone is reset.
Click to expand...
Click to collapse
I forgot the setting 'Receive all incoming beams' now that has been set, everything is OK. Thanks
Had the same problem. Set to visible, receive all incoming beams etc. but I could only send, not receive. I solved the problem by activating Bluetooth Explorer and Activate File sharing. Strange since I didn't have this problem with WM 6.0 and BT Explorer deactivated.
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Can anyone recommend to me a custom ROM for the X1 that has had improvements to the Bluetooth implementation?
Click to expand...
Click to collapse
Never heard any cook do BT differently exept base on differenr WM built. I do patch the driver w/ HD one such that Cyberon VC over BT works. I never had bt cutting out during call but sometime AFTER the call (and it's a well known issue to all HTC device)
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
netbat said:
Perhaps it is worth to try other radio (you don't have to change rom, just update radio). I'm really not sure, but radio probably contains Bluetooth drivers too. Is that right?
Click to expand...
Click to collapse
When flashing generic ROM you flash a corresponding radio (R3A with 1.14, R2A with 1.11 or 1.10). So this is probably no solution, but always worth a shot.
Diferent RADIOs are NOT the solution (I tried more than five radios).
I have tried more than 30 diferent ROMs in spanish and english, with WM6.1 and WM6.5, and no one go right with the Bluetooth.
I call Sony Ericson and they said that is normal because to save energy. It´s my first phones that disconect the bluetooth.
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
mattiL said:
I've had all kinds of BT problems.
It usually turns of by itself, even in the middle of a call. (not so fun in the car, driving)
An I've also tried different ROM's and radios, no better.
BT is not very good on X1 I'm afraid... : (
Click to expand...
Click to collapse
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
I have no idea really, I only have the Xperia.
Any htc owners here ?
jhbodle said:
Would you say that this problem affects all Windows Mobile devices? For example, if I get an HTC Touch Pro 2 am I going to have the same issues?
Click to expand...
Click to collapse
jhbodle said:
My X1 has had problems with it's Bluetooth cutting out during calls ever since I got it. Even after a replacement phone and the new R3A firmware the problem persists. So now I am going the custom route...
Click to expand...
Click to collapse
A friend and me, we both have the same problem as described by jhbodle since approx 6 months back.
During almost every call the sound is transferred back to the phone (as if I would have shut down the headset).
The weird thing is that bluetooth is still on and the headset is still treated as if it would be connected, meaning that I can still end the call by pressing the call button on the headset.
I can get the sound back to the headset (during the conversation) in two ways:
By choosing "Turn hands-free off" and then "Turn hands-free on" from the phone, or by shutting down the headset and then starting it again.
We have narrowed it down to that this happens whenever the phone disconnects from dataconnection (which seems to happen from time to time when using Activesync with Push - it disconnects and then directly reconnects). It does not matter if the phone is in 3G or GSM mode.
Have any of you noticed any similar problems during calls?
We are using the Swedish Telenor network. It might be possible that they have changed something that triggers the dataconnection to reset, and you on other networks are not beeing disconnected and therefore have not noticed this issue?
Maybe most of you are not using your dataconnections that heavely?
Those who are - could you test to disconnect the dataconnection while in call with TB headset..?
My friend have kept his phone with stock ROMs - he have had this problem with 3 or more different headsets.
I am flashoholic and have tried every ROM release from the top five cookers since the Hard SPL release for the Xperia. I have had the phone replaced once for a month ago - I have had this problem with both phones.
Hope you can help me to narrow this problem down even more, and most of all, I would like to know if we are alone with this problem..?
I have searched the forum for similar problems, but only found this one, so I did not want to create a new thread even if I it should be in the "General" category...
Oops... apparently I did not search enough - i have now found some other threads discussing this issue, but without any solutions.
I know that the most common BT issue for everybody is the BT deactivating itself after a call (I have had this from time to time aswell -especially after I have installed the MSVC software).
I don't want to start cross linking and dubbel posting, so I will wait and see if anybody has something to add to my previous post over here...
Would be nice to know if others, having this issue, can also link this to the dataconnection disconnecting.
How long are you talking on the phone for? I don't talk on mine for more than a few minutes, but occasionally I do get the 30+ minute calls that I have to deal with and I've never had blue tooth just shut off for no apparent reason.
For both me and a friend of mine, this happens during most calls regardless of the call duration (my calls usually take between 30sec and 10 minutes).
Sometimes, when I know that the conversation will take time, I reroute the sound back to the headset, but the same thing can happen again during the same call.
As I said, for me this happens whenever dataconnection disconnects on the phone.
Are you using dataconnection alot? Could you please try to disconnect the dataconnection during a call?
thanks