My PDA2K is always crashing after i had to downgrade it. and the batery doesn't keep long.
What can I do? please help
Use corporate mode!!!
Its a common probem with the XDA IIs !!!
But once a hard reset is done (power+soft reset) & corporate mode is loaded (with the password as 0506) it becomes more stable.
I hope this might help!.
Related
Dear All
I would like to have some urgent help on this one. I have downloaded the new Rom Update for my XDAIIs. I have successfully started the ROM update. I reached the screen when it prompted me with the device information and I clicked on UPDATE to start the process. My XDA screen went to Black with the USB indication ...and v2.06 indicated below. Nothing happened and the wizard did not proceed with any further indication except "Checking the information in your device ..." etc...It froze on this and I had to restart my PC. Now my XDAIIs is remaining on the same blacked out screen and won't boot to its previous room if I do a soft or hard reset. Have I "Killed" my XDAIIs? Is there anything I did wrong? Pls HELP !!!!!!!!!!!!!!!!!!
Thanks
Ashraf
No Problem..
1. Do a soft reset (the screen will just blik once and still remain blank)
2. Put the device in cradle/USB
3. ReDo your upgrading procedure by double clicking the upgrade file
It should work then... good luck
same
Guys,
I have the same problem only a little more stupidity on my part, check it out at - http://forum.xda-developers.com/viewtopic.php?p=130797#130797
As you can see kumar00455 your advice doesn't work in my situation
any other help ??
Heath
Kumar
Thanks pal !
I've been able to sort out the problem. I actually needed to stop the Active Sync application on my PC so that the upgrade wizard could connect to the XDAIIs via USB and perform the update. It will not work if the Active Sync task is still running as a process.
After running the app again, the upgrade worked seamlessly without any glitch...!!!
Thanks for your support.
Ashraf
How do I restore my PDA to a working state after running HimaClearJumpCode.exe on the device.
All I get on the PDA screen now is "USB/Serial" and "V1.01"
I was trying to uppgrade to WM5 before I found out ther is no WM5 for the
Qtek 2020i :-(
UPDATE: Never mind figured it out
himaclearjumpcode
I DID IT!
Now the only thing i got is seria/usb and v1.03
how can i get out of it and have my xdaII back?
please help me
Does hitting the soft reset work? Or did you actually begin the upgrade process? Seems that you're stuck in bootloader mode.
Hello today happend something strange!
My BA is connecting to the network, but showing "no service" i'm able to recive messages and replay on it, but i can call or answer the phone, becouse is not ringing and keys from reciving call doesn't work.
Also i can't synchronised! Please help me, i don't know what is happend. restart not helping at all! i got helmi_c 1.4 rom.
PLEASE HELP me
cheers Jocker01
i can't turn on contacts as well
Looks at the antenna icon. Is there a bang (!) or an x next to it?
If it's an x, the radio has been turned off, or the system thinks it is. Check the wireless manager screen.
If it's a bang, soft reset the phone. I occasionally see this and the reset usually clears it up.
Hello today happend something strange!
My BA is connecting to the network, but showing "no service" i'm able to recive messages and replay on it, but i can call or answer the phone, becouse is not ringing and keys from reciving call doesn't work.
Also i can't synchronised! Please help me, i don't know what is happend. restart not helping at all! i got helmi_c 1.4 rom.
PLEASE HELP me
cheers Jocker01
i can't turn on contacts as well
Click to expand...
Click to collapse
i have the same problem with threadstarter.
i tried to softreset and hardreset even reflashing the radio still won't work.
my very concern is the contact list i need to backup it first before i reflash the rom. the problem is the contact list button dont work anymore. this is the most important i want to retrieve. need your advice.
thanks!
which rom do you use and which radio version ?
jaste99 said:
i have the same problem with threadstarter.
i tried to softreset and hardreset even reflashing the radio still won't work.
my very concern is the contact list i need to backup it first before i reflash the rom. the problem is the contact list button dont work anymore. this is the most important i want to retrieve. need your advice.
thanks!
Click to expand...
Click to collapse
with my looks the same, i can't turn on contact at all!
on network indicator is "!" and soft ord hard reset doesn't help!
my radio ver. 1.12.00
rom ver. 5.04.10. WWE
please help me!
Cheers Jocker01
ps. unfortunetlly ftp doesn't work and i can't download new radio
mayby someone have this and can share with us! please
i've try to upgrade today radio, but i have some problems, RUU show error 100: model ID error! should i looking for special radio made for helmi rom, cheers Jocker01
me too ! with 9090 qtek
i have the same problem, the phone doest`n work and appears ( ! )...i have updated the radio and rom(hemi), but was unsuccesfull. i dont have a backup of my antique rom and radio:
PH20B 0 B ESN N TELCE301 1.40.03 0 3 1.40.178 1.12.00 12.00
i have made a lot of soft and hard resets
i need your help!
sorry for my bad english
i've sold out this problem, i've come back to oryginal rom! now is working fine, i haven't try upgrade to wm2k5 yet, but i will asap! but first i wanna update radio! Cheers Jocker01
Hey guys,
I have a ATT tilt and installed the duut touchflo apps. I then clicke on the HTC music pp in programs and now my phone is continually rebooting. it get to the green screen and re-boots.
HELP
never mind guys -- I was finally able to get the hard reset to work
Hey,
I have the same problem with a french Orange model I just received today... keep rebooting.
hard reset doesn't seem to work and I can't boot even to install hard SPL and flash another rom to try.
Could mtty help me or something ?
Thanks,
Cedric
Hi!
Ive got a big problem with my Qtek 9090..I wanted to flash my OS to Wm6 but during the instalation the device lost connectivity..I dont know how and since than i cannot start it again...i cannot get to the bootloader mode
what should I do???
Did you try holding record-power +reset?
I had some of these issues before, disconnecting, battery down, ... but always managed to get in 'usb-mode' after which you can retry the flash update...
If it doesn't work, give us some more info what happens, what you tried and what did what... we'll (try to) help you out
don't panic, there's always a solution
I have the same problem, i try to updated to Helmi WM6 in my desktop Windows Vista, but my BA never come for the USB V2.07
YES !!! same here.... at 37% my connection lost and i can't TURN IT BACK ON AGAIN .... How come ? What should I do ?
I already browse the whole upgrading things and I (believe) never make any mistake when do it.
plz help me .......
SOLVED ! see my post HERE
I've had this problem. We've had to flash about 250+ devices and four of them were disconnected before 100% download.
we've not been able to do anything with these devices except just write them off and not use them.
If anyone knows how we will be able to get them working again it would be greatly appreciated.
thanks