Related
Hi
Am newbie to the whole XDA thing (am just converting from BB), have managed to unlock my XDA Mini S and tried running K-JAM_WWE_216901_2169101_020721_ship.exe as i heard this would reflash the ROM to the latest (a friend of mine gave me this copy).
Got an error during this, and wondered if there was a specific XDA Mini S version (have searched on the site and it appears that there is on ftp://ftp.xda-developers.com/Wizard) and there are many different ROMS under the ROM directory, but i am unable to login to this site.
Am i just being thick here.
Any help gretaly appreciated.
That ROM upgrade worked ok on my xda-mini-s
When I upgraded my ROM I done the following.....
#unlock phone
with no SIM card in phone
copy EnableRapi.cab to phone
run EnableRapi.cab from phone
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
run lokiwiz.bat from PC
select option 'C' unlock CID
phone reboots
add CID to backout bin file names on PC
#install new ROM
uncomress ROM file from zip
click ROM install file
follow instruction
takes 10 minutes
phone reboots
Hope this helps
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Dudes - I've done the same upgrade to my mini S. Not sure if it's worth the bother. No difference in speed/performance and my keyboard shifted symbols (@?£$) are out of sync. I think I'll go back to the Mini S rom without the customised stuff.
LLcoolJ:
I noticed lots of difference, speed and battery life.
To get the keyboard from US to UK symbols use the following:
Here are the registry changes ....
Keyboard language
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
0409 English US
0407 German
0419 Russian
040C French
0410 Italian
040A Spanish
benih007 said:
Bilbo,
Hi. I ran through what you put but my Mini S does not auto reboot. I'm not sure the exact definition of a soft reboot is? - Put the stylus in the side or hold the power button for a few seconds?
Either way I cannot get the new KJAM rom on as invalid vendor ID is haunting me.
Any help would be appreciated.
Thank You
Ben
Click to expand...
Click to collapse
The invalid vendor ID is the result of the ROM update..... to get rid of it make sure you run :
run lokiwiz.bat from PC
select option 'U' Unlock SIM
phone reboots
add SIM to backout bin file names on PC
A soft reboot is when you hit the reset button on the right hand side, its like rebooting a PC. A hard reset however is a re-install boot where you loose everything and the ROM is re-installed.
Cheers Bilbo - I've made the changes to the registry and the keyboard talks like me. Your right about battery power as well.
Bilbo.
Thank you for replying and helping.
Let me just go over what you said...
first I ran the loki cab file on the mini S.
run lokiwiz.bat from PC -- done.
select option 'U' Unlock SIM -- done (with sim card removed)
phone reboots -- not automatically though, but I will reboot it after the lokiwiz.bat finishes
add SIM to backout bin file names on PC -- what does this mean? this is not in the lokiwiz instructions and this is where i'm going wrong. Where is the bin file created btw, I can never find it?
I have tried so many combinations i'm starting to lose hope.
If you can help to get this damn thing working I promise to make a donation to this web site.
Thanks for all the good work.
Ben
i managed to get the unlock, but did not do the CID (so will try that).
So once i have done that will the K-JAM_WWE_216901_2169101_020721_ship.exe upgrade work?
Here's how I got mine working. - Remove the Sim card. Make sure you use Lockwiz02b. Select U to unlock from the options menu. The mini S should reboot automatically. Leave the device alone until its functional again and then start Lockwiz02b again. Select C (CID unlock) from the menu. It should reboot again and close down the Lockwiz box. The mini S should now be ready for a rom upgrade. On my first attempt I used the original Lockwiz prog which caused problems for me.
I'm about to do my rom update on my mini s....but this thread is so confusing!
Is there a step by step guide somewhere on the forum???
ROM Upgrade
Upgraded O2 XDA mini without any real problems:
I used the aWizard 1.3 Beta 2 tool which allowed me to carry out the CID Unlock and was pretty easy to understand. What it did not do was pick up the ROM from the rom folder but once I had completed the CID unlock I ran the rom normally and all was well.
So in essence: Connect Mini to PC via Activesync
Run the aWizard Bat file enabling RAPI (This is used to communicate with your XDA once it has done using Activesync). Then select the Unlock CID option. Once completed I then exited the wizard and followed the instructions as part of the rom upgrade and all worked well no hitches except the one mentioned above about the keyboard (now I have to find out how to modify the registry).
So what I used: aWizard 1.3 Beta 2 and QTEK Rom 2.17
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
Mystery Solved!!!!
I finally figured out why its not working....
When I downloaded the loki zip file I opened it up in winzip and dragged the contents to a folder I created. Ran the batch file eveything seemed ok and the unlocker said it unlocked the device.
I have now realised that you have extract the files from the loki zip file and use the folder structure. If you don't, the utils directory is not created and the loki.bat cannot reference some files.
Found the answer on page 12/13 of the loki thread.
Thanks All
Ben
After doing the CID unlock the ROM install worked fine.
Just having the keyboard issue at the moment with symbols, went to:
Registry: HKCU\ControlPanel\Keybd
Key: Locale (string)
Value: 0809 English UK
but could not find the locale key to set to UK?
All i see is:
DefaultKeyLock
InitialDelay
MuteSwitch
RepeatRate
ShowWarningMsg
Am i looking in the right place or do i have to add this in (if so how)?
Cheers
Youv'e got to create a new registry key. Assuming you've got a registry editor. Go to HKEY_CURRENT_USER / Control Panel / Keybd.
Then create a new string value. Name it Locale and give it a value of 0809 for UK. Then reboot.
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
quick question...
i am fed up with waiting for o2 to release their latest ROM so i am going to take the plunge with this ROM instead, my question is do i have to make any special changes once installed to make it work with O2 UK i.e. mms settings, GPRS settings etc.?
Also i noticed somebody has put together a T-Mobile USA customised ROM any chance that somebody will do this for O2 UK?
hyettd said:
Just went in a created the new reg key as you mentioned.
Rebooted and it worked.
Many thanks for all your help on this, it is most appreciated.
I am now the converted!!!
So to sum up for anybody else:
Bought XDA Mini S from 02
use Lockwiz02b
Select U to unlock from the options menu
The mini S should reboot automatically
Start Lockwiz02b again
Select C (CID unlock) from the menu
It should reboot again and close down the Lockwiz box
The mini S should now be ready for a rom upgrade.
Then run
K-JAM_WWE_216901_2169101_020721_ship.exe
follow usual prompts.
Once phone is up and running, get a reg edit tool (i used PHMregedit) as the keyboard for a couple of the symbols is out of synch (think it is US style).
Using regedit tool
Go to HKEY_CURRENT_USER / Control Panel / Keybd
Then create a new string value
Name it Locale and give it a value of 0809 for UK
Then reboot.
Mini XDA should now work fine.
I have found that the new push technology for email is faster than Blackberry and more usueful.
Hope this is helpful to others.
Cheers great forum
Click to expand...
Click to collapse
The Problem im having here is that once i have created the registry key, it deletes after a reboot. Is there something else i need to unlock to allow writing to the registry?
New Roms
Hi there - I'm sure this is your answer - I have read this on many forums.
WM05 takes a while to store the registry updates after you exit your editor. Make the registry change and wait a minute or so before performing the soft reset.
Hope this helps - we have all fell for this "improvement" to WM5 from the boys at MS.
Regards,
Chris.
:lol:
Thanks Bilbo . . . Spot on. First time to all this and followed it a treat
Thanks All
Hi:
First of all, credit this guy from mobile01.com http://www.mobile01.com/topicdetail.php?f=129&t=278666
This fix is based on his idea.
P.S. Please uninstall SPB shell, or SPB today plug-ins before you start.
Download the attachment.
1. Install calligrapher.exe from PC
2. move FitalyServer.dll,FitalyOptions.exe,FitalyClient.exe to "\windows"
3. move FitalyStartup.exe to "\windows\start" P.S. maybe it's called "\windows\startup" since I am on chinese rom.
4. if u have register editor then skip this one, otherwise install PHMRegEdit on PDA
5. go to "\windows", then open FitalyOptions.exe
6. go to the "oprations" tab, and change method to "write pad"
7. soft rest
8. open RHMRegedit, go "HKEY_CURRENT_USER\Software\Textware Solutions\Fitaly", to copy "Startup Input Method" (just pen down and hold)to "HKEY_CURRENT_USER\Software\ParaGraph\CalliGrapher" and "HKEY_CURRENT_USER\Software\ParaGraph\CalliGrapher\WritePad"
9. hold the power bottom to force shut down
10. turn PDA on, there you go, enter the serial number from the file!
11. enjoy
download link(with program):
http://rapidshare.com/files/18465302/Calligrapher.zip.html
Hi all
I installed the HTC Home plug Based on the Kaiser one. With the Weather Patch
But now I have a strange problem. In the Weather Tab it says (null) instead of High or Low.
Same go's for the Ringtone.
Well the problem is: When I reload the Plug it works. But when I reboot my device it show op (Null) again until I reload the Plugin.
Does anyone know this problem???
Thanks in advance.
Same problem, haven't found a real fix yet but I got a workaround you can try.
After every reset of the device follow these steps.
- Disable HTC Home from the today screen.
- Open HTC Home Customizer
- Change some minor detail (usually selected weather city for me)
- Save
- Go back to today screen and HTC home is there with all language files working magically.
It's a bit of a pain in the ass but I haven't found a better solution just yet. Hopefully someone else can answer this for us but in the meantime you can use my cheap method to make it look right.
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
le_hades said:
You have to rename:
windows\HTCHome.dll.0409.mui
windows\HTC_HDlg.exe.0409.mui
windows\HH_0409_WeatherCities.xml
to your locale variable (if your rom isn't wwe), in my case it's spanish (0C0A):
windows\HTCHome.dll.0C0A.mui
windows\HTC_HDlg.exe.0C0A.mui
windows\HH_0C0A_WeatherCities.xml
It worked for me.
There's another way to do it, harder but way better, i usually do this with my own cabs because after a hard reset i don't like having to change everything again. Steps:
1- Decompress the cab with winrar
2- Edit the file "setup.xml" and correct things you want to change about installation setup: name of files to install (like in this case), name of registry variables to write (like in 10-button commanager for wing), etc
3- Find and download "Cabpack 1.4", be sure to use the following options for it to work: "compression type = mszip", "Create cabinets for = 16 bit extractor"
4- Use it for re-compressing your modified cab and install.
5- Voilá... great pre-modified cabs that you can keep for the next hard-reset.
Hope you like it. Regards
Click to expand...
Click to collapse
GREAT! Im gonna try this out now THanks
The First One WOrked!!!!
Ok but you are right...I dont want to do all that again after Hard Reset. So im going to try make a Modifi on this Cab.. Thanks again
Hello and thanks for this help !
But it doesn't work for me. Maybe you can help me ?
I have the same problem with "null:null"
But the files are already named with my locale variable. (I'm not sure)
windows\HTCHome.dll.040C.mui
windows\HTC_HDlg.exe.040C.mui
windows\HH_040C_WeatherCities.xml
The language of my Windows Mobile 6 is in french. But i want to display weather of "Lausanne" in Switzerland (100C)
You say : if your rom isn't wwe --> How can i see if my rom is wwe ?
Thanks a lot for your answers
on my tytn II I have xda cube and it works fine. I cannot get any version of slithers cube to work. I have tried everything, spent hours, and am sure I followed the instructions from slither exactly
Why not ask this question in the thread it pertains to?
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
leon sprouse said:
Ive posted 3 now 4 replies and no answers. I really would like to get the slither uno cube to work. any ideas?
Click to expand...
Click to collapse
i replied to you in the appropriate thread.
TRY THIS !!!!!
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
3. Install FTouchFlo or FTouchSL.
4. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
5. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
6. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
Link for that Thread ????????????/
cube
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
What device you have?
OK. let me check what I wrote to you.
I aknowledge that I'M HAVING probms with FTouchFlo launching horizontal, don't have time to play BUT MANAGED TO RUN the Cube.
Stay tuned.
Sorry Corrected.
leon sprouse said:
I did what you said ,not sure if i configured ftouchflo right.In gestures In run aplication box I put the path you stated. nothing happens after soft reset. i noticed that the cube is not in the remove programs box so it's not on the device?
Click to expand...
Click to collapse
As you can see didn't change that much but reda this again........
Colored Numbers show the change in orther.
AHHHHHHH! make sure you completely uninstalled any cube version you have installed before.
ANOTHER THING SOFT RESETS ARE VERY IMPORTANT.
Try this.
1. Soft Reset your device (VERY IMPORTANT)
ahhhhh! make sure nobody calls you at the time of installation. (go to comm man and DISABLE the PHONE)
2. Unzip the contents of the zip file.
3. Copy the folder "SCLPC++ to '/Application Data/' NO WHERE ELSE!!!
4. Install FTouchFlo or FTouchSL.
5. SOFT RESET
6. ((((( Now to configure FTouchFlo ****I really don't Know if you need it for FTouchSL****you HAVE to INSTALL the Configuration Tool (FTouchFloConfig_v0.9))))))))))))
7. After You Install the Configuration Tool do a SOFT RESET AGAIN
8. Configure FTouchFlo or FTouchSL to open the file 'SCLPC++.exe' for the
Down-Up Guesture.
9. In this example the path is '/Application Data/SCLPC++/SCLPC++.exe'
10. SOFT RESET
8. Swipe your finger from the bottom to the top of screen to start cube.
9. IFFFFF YOU HAVE NO RESPONSE DO ANOTHER SOFT RESET.
**** Note: I have read and found that most of the times people are in such a hurry that they forget to do A SOFT RESET (JUST FOR SAFETY) and end up with things not working or worst HARD RESETTING. *****
SO FOLLOW THE SOFT RESET STEPS I INCLUDED HERE JUST FOR SAFETTY
ANY PROGRAM YOU HAVE THAT ALSO RUN GESTURES?
cube
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
configure touchflo
How do I configure touchflo. what do I do when i open gestures. Im an old man so this is chinese to me
Ohhhh! you didn't have the last version.
Ok! now that you have the LATEST VERSION. Follow the the instructions to install it.
Then go to the following link where MaxMotus created a theme for the CUBE, I didn't installit yet but I'm in that process, I've installed first his Other themes for other Aplications. So far his Set ups are the best NON SLOW ones.
Also make sure to see his other posts.
Stay tune to this thread you've created, and I will walk you thru everything, as I already did it, I've been there.
For now I have to go.
GO HERE FOR THE CUBE SKIN the great MaxMotus created. In the zipis everithing you need also INSTRUCTIONS.
http://forum.xda-developers.com/showthread.php?t=377843
cube
I am just going to install the final 051. It works but some of the icons dont. I really wanted the uno alas.
mm cube
I have the program on my file but haven't tried to open and install it
Basically you just need to drop the file into a directory specified in the install instructions.
Without FTouchFlo????
leon sprouse said:
I was able to download the final ver51 and it works without ftouchflo con but there are no paths to a lot of the icons. i really want to download the uno version
Click to expand...
Click to collapse
Works without FTouchFlo?
Explain.
You guys havent been to this thread..?
http://forum.xda-developers.com/showthread.php?t=354715
I was just about to suggest you go to that thread.
Right away!
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
BEATTWEAKER said:
Ok I have read this site several times and have flashed my phone numerous times and I can say there are some damn good ROM's located on this site..However there are flaws to each one and that is why i am writing this..I do appreciate all of the hard work that goes into these roms for if you guys didnt do them then we would be stuck with the same ol tired looking phones..
For those of you that are new to this please pay attention to the posts for i have learned the hard way..I would like to know how to fix some of the errors that are in these roms because like I said befor each one is different..so far the one that i have found to be the best for most users is OTP v7.5.1 TouchFlo 2D Professional...this Rom seems to have it all together except one thing..the call volume is low and the ringtone volume is also low..besides that this is your winner in my eyes for a power user..
If anyone out there knows how to fix these errors please let me know for I am staying with this ROM until I find a better one...thank you for your time and I will be donating to the rightful developer...
Beat Tweaker
[email protected]
Click to expand...
Click to collapse
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
All of your questions are answered inside
refuse2bstopped said:
I have a couple questions for you, one, can you give a link to that rom? And two, how long have you used it?
Click to expand...
Click to collapse
I have been using this rom for a couple of weeks now and I have just discovered once I reflashed it I have seemed to fix the only error that was found...
here is a posting that will give some info and hopefully answer alot of your current questions..
Default FAQ
FAQ Section:
Read everything in this section before downloading the roms and flashing.
If you don't understand it, read it again and again until you understand.
Once your done flashing your device double check back here again to configure your device.
I will not reply to any subjects already covered in this section.
I'm not trying to be rude, I'm just very busy with finishing up this project and also working on other projects.
Back up your phone before downloading and flashing this rom... I do not want anybody to loose their data due to flashing this rom, as the rom will erase all of your data...
How To Flash Rom
HERALD-USPL-beta3 - posted by tiksister - rapidshare
How-To Flash the HERALD-USPL-beta3:
Download and extract both files.
Place the extracted OTP v7.1.nbh into the Herald-uspl-beta3/RUU folder.
Move the entire Herald-uspl-beta3 folder to the root of the c:\.
Follow the simple readme file.
Break down of how to flash this rom:
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
===================================
If your device is already HARD-SPL read the following link before flashing.
HARD-SPL
======================
Disable Random Access and Enable Scrolling
With random access you must do the following to enable contact scrolling.
Click on the contacts button at the lower right hand side of the screen.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
Now I know the following will sound strange but it will enable scrolling in the contact menu.
Repeat the following steps again, and the random acess bar on the right handside will go away and scrolling will work again.
Click on the Menu button
Click on Options
Uncheck "Show alphabetical index
Click on the ok button to exit
If you want to enable random access, just go back and uncheck the "Show alphabetical index"
======================
How to turn off QuickMenu
/Start/QuickMenu/Exit
It will prompt you with "Exit QuickMenu?
Choose yes and it will not startup again even after a reboot.
Things to do after flashing your device:
Network Wizard
Go to \Start\Settings\Connections\Network Wizard
Choose your location and provider, do not reset the device when prompted.
Connections
Go to \Start\Settings\Connections\Connections
Once completed save and exit
Video on how to setup your device after flashing
MMS/SMS Setup
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: sendlimit3 which will be set to the default of 300k. u gotta change it to 1228800 and than the 1200k will appear.
note u can also change sendlimit 2, 1 to be the same as what ever u decide to change wap * sendlimt* to be. once u do this the 1200k will appear.
++++in between doing the above and below, u have to go to
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
=======================
Soft Keys
The calendar and contacts keys can be changed with the following steps.
/Settings/soft keys
Use this setting feature to change to what every programs you want.
========================
Show CIM contacts
By default it has been disabled so your CIM contacts will not display, use the following reg hacks to enable it.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"ShowSIM"=dword:00000001
=========================
Show clock instead of battery
If you want to show the clock instead of the battery or the other way around, use the following reg hack.
Clock
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:0
Change the current dword:0 to 1.
Battery
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell]
"ShowTitleBarClock"=dword:1
Change the current dword:1 to 0.
==========================
M2DC
Just tried the M2DC theme manager on 7.3 Std, with a renamed .zip file to .m2dct file (specifically the KnobiSkin from the M2D skin thread).
First time, it locked up. M2DC continued with spinning icon until I forced a reboot. Touchflo was off after reboot, and after enabling it everything appeared to be the same.
Second attempt, I disabled Touchflo from today before applying the new theme. Got the "Applying Theme" prompt. After M2DC closed, I reactivated touchflow and new theme was applied.
Simple instruction for use of M2DC Themes on OTP 7.3:
Find a skin you like, download the zip file (not the cab),
Rename file to .m2dct,
Copy new file to the themes directory of the M2DC install directory,
Disable touchflo in Today settings
Start M2DC,
Go to themes tab (the first time it will back up the default theme),
Click the new theme then apply,
Restart touchflo.
Alternate for creating themes from skin CABs:
Run M2DC first, let it make the DefaultThemeBackup.m2dct file, Close M2DC.
Run the CAB skin of choice.
Rename DefaultThemeBackup.m2dct to OriginalTheme.m2dct (or anything else with same extension).
Rerun M2DC. It will detect no DefaultThemeBackup.m2dct and will ask to back up again. Let it make new backup. Close M2DC.
Rename new file to the name of the new theme.
Repeat for each skin CAB you wish to convert to m2dc theme file.
Note: The M2DCT files can be large (over 3Mb, 660 files backed up). Best to do this only if M2DC is installed on a large Storage card.
Note 2: Several times M2DC appeared to freeze when applying or backing up themes. It looks like it has problems if touchflo is not off prior to running. It does try to deactivate touchFlo then reactivate when done, but it doesn't appear to work flawlessly yet. It is better to deactivate the Today plugin before running M2DC on this ROM build.
__________________
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
http://www.evolvers.net/Herald_Roms/
Here is one link that has some pretty useful items in it also:
http://forum.xda-developers.com/showthread.php?t=341867
thanks to all of the developers and cooks on XDA for without you guys none of this would be possible