hey all I tried to put the upgraded cam patch onto my XdaIIi and it went wrong and now all the screen says is:
SERIAL
V1.01
whats wrong with it and more importantly how do i fix it?
thanks
put your device to the cradle and run the upgrade proses from your pc. Im sure you can done it.
Thanks
thanks cluster, its back to normal now I crapped myself for a minute
is this right?
ROM version: 1.11.00 WWE
Radio version: 1.04.00
Protocol version: 1337.42
ExtROM version 1.11.162 WWE
Yes, for some reason your device (correctly) went into Bootloader mode, but the process wasn't finished.
It doesn't matter, so long as you run the entire firmware flashing process from start to finish and keep the device in the cradle until it says finished on your PC, you should have no problem.
Related
I keep trying to run the BaUpgradeUt.exe and it crashes right away with an RUU error, anyone know the reason for this?
RUU has encountered a problem and needs to close. We are sorry for the inconvenience.
SX66 with T-Mobile USA
This question has been posted by You before:
http://forum.xda-developers.com/viewtopic.php?p=123215#123215
If you did not get an answer is could be due to the fact that you don't tell us much about what you did, what version you are trying to upgrade, what version you have now.
i got the rom files from ftp://xdaupload:[email protected]/Blueangel/SX66/Beta2-S1.40.00-R1.12.00.E1.40.122.rar
RAR file includes
System 1.40.00
Radio 1.12.00
Ext ROM 1.40.122
I unrar the upgrade into a clean dir, softbooted my sx66, placed back into the crib then made sure activesync was running as well as connected, Then I ran the BaUpgradeUt.exe. from there it crashes instantly with this error message
"RUU has encountered a problem and needs to close. We are sorry for the inconvenience. "
My device is a SX66 on T-mobile USA
Current Settings
ROM 1.32.19 WWE
ROM date 12/17/04
Radio version 1.06.02
Protocol version 1337.38
ExtROM version 1.32.115 WWE
try a pc reboot you might have an old version still running in the background.
I tried that, I even tried on a totally different Computer
hi all, i am new here
i have a t-mobile MDA Vario
Rom Version: 2.17.7.2. wwe
Rom Date: 2/10/06
Radio version:02.07.10
Protocol version: 4.13.1.03
ExtROM version: 2.17.7.102
My machine now goes nuts by flashing, twinkling those items on the screen, when it does, i could not use anything any more.
I thought it was because of those chinese software, but it is not. I have un-installed them and re-installed a new rom. The situation is still the same.
And, normally when i dont use it for 2 mins, it will turn to power-save mode. But that doesnt happened anymore...
Can anyone help me with this? What is the problem?
Thank you in advance!
Hi all
I am posting here in the slightest hope that someone can help me out. In a nutshell I have a T-Mobile MDA III PH20B that has ceased working
I have tried hard resets but still have no joy and wondered if someone could help?
First off, on the back of the MDA once the battery is removed it shows;
Model PH20B
IMEI 35303000.......
When it starts up, in the bottom right corner it shows;
NO GSM
D1.06.00 ENG
If I choose START > SETTINGS > DEVICE INFO I see the following on the different tabs;
VERSION
Rom Version: 1.06.00 ENG
Rom Date: 08/05/04
Radio version:
Protocol version:
ExtROM Version: 1.06.117 WWE
IDENTITY
Model No: PH20B
Platform PocketPC
IMEI: (and no number!!!)
Problem is, the phone will not work following me trying to upgrade the ExtRom from the T-Mobile website (http://www.tm-phonedownloads.com/download_manager_mda_3.html). It now keeps bombing out out with an error message saying;
ERROR 120: COUNTRY ID ERROR n-n-38-38-38
The ROM image that you are trying to use is not designed to work with your device. Please check the vender Website and download the correct ROM update.
This has never been tampered with, has never been unlocked and is now dead as a dodo. Can anyone please off any advice on how I can get it backup and running? I am lost (no pun intended) without my Bluetooth TomTom and phone.
When it connects to its cradle, my PC can still see it, so I am able to copy files to and from it. Thats about all I can do with it though
frostie
Well it seems like you MDAIII has a corupt system and thus you need to reflash it.
Best option for you is wiki.
Go to the link in my signature and see if you can find a original version that you can flash it with.
The No GMS means that the radio part is corupt.
The 1.06 means that you have a OLD version of the OS as we are now at 1.42.
The fact that you can still copy files just proves that the device can be seem but without a radio it is not much of a phone.
The country code error you can get arond by using the MaUpgradeUt_noID.ZIP application.
In all you will find out most of what you need of wiki.
Follow the link for the radio upgrade to solve the NO GSM
Follow the link for the 1.42 for the os
And BTW wellcome to xda-developers (its your first post)
Cheers for the welcome. Yup, first post so had to make sure that I included as much info as I possible could to show that I am atleast trying to help myself :lol:
Thanks for the pointers. I will work my way through them and let you know how I get on.
Very much appreciated.
Backup and running
You want to know what the problem was? I feel ashamed :lol:
When it says Bootloader Mode - I got that far, but then pressed the on/off switch to fire it up again. I didn't realise the upgrade happened when it was a dark screen with just Serial or USB on it.
Shame!
Anyway thanks for your help as its back up and running, and up to date with 1.42 and 1.15 I also thought 'sod it' and have managed to make it SIM free too
Again, many thanks.
Well 3 posts later and you now have 1.42 radio 1.15 and sim free, thats wiki for you.
Now cook your extened rom and get rid of all the operator crap.
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
However, i am stuck halfway. Here is my Devicetype.txt file description. Only managed to get the Devicetype as PH20B, Language ID = WWE. The rest of the info I can't really make out.
Also, when i use the file : xda2nbftool -t -x,
it gave a warning for ms_.nbf
The rest of the files such as nk.nba and radio.nbf were ignored. See pic.
How do i get the rest of the hex addresses for the radio and nk files ?
Could someone help to generate the final nbf files for me or help advise ?
The Official ROM file versions are here :
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
Can anyone help ?
More information on my existing XDA2s firmware :
ROM Version : 5.04.09.WWE
ROM Date : 11/02/06
Radio Version : 1.15.00
Protocol Version : 1337.45
ExtROM Version : (Left Blank)
Never really heard of ROM Version 5.04.09.WWE. And SDIO Card is not detected. Would like to downgrade to the official ROM as i suspect that the SDIO Drivers are not installed in the existing ROM.
Also, i tried using XDAtools\OSimagetool to copy another XDA2s firmware to this XDA2s. But it failed to write generating an error in the pic. Status of Activesync is connected.
mtnbikefreak said:
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
Click to expand...
Click to collapse
I'm afraid you have read the wrong homework. Those directions are for the Himalaya & Andes, not the angel.
What OS is on the phone now? That will help point to the correct directions needed to reflash the phone.
Flashing to 2003 from WM5 or 6 will vary depending on if the extended ROM has been resized, etc.
Check the angel getting started in the wiki (It's working now)
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Oh ... thanks for pointing that out. To answer more questions :
It's running on a generic Windows mobile 5.0. I have a feeling that the Ext rom is already corrupted as the gsm portion of the phone is not functioning properly. I'll do a readup and revert my results. Thanks.
here's the thing. if you have a problem with the CID... all you have to do is find the exe file here named MAUpgradeUt_NoId.exe... use that instead of the exe provided in your Official Rom, i guess that would be WM2003se you are installing.
afaik, extrom havent have a thing to do with the GSM.
Thanks for the reply.
Thing now is that i am trying to downgrade from wm2005 to wm2003 (o2 official asian rom v1.42) But then looks like i am trying in vain.
Tried to do what is in the directions for wm2005->wm2003 by setting it to bootloader mode, doing a hardreset and using maupgrade_no_id with the official nk.nbf
But then it hangs while the check is being done. The xda2s screen shows v2.08 and serial. It changes to usb once the usb cable is plugged in.
Is there any other method i can do to downgrade it ?
Sorry for my very bad english.
I have BA upgraded from W2003SE to WM6 (Helmi BA WM6 R0).
ROM Version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version:
I'm trying to upgrade Radio to 1.15.00:
MaUpgradeUt_noID:
Your device software is about to be update from:
Device radio image version: 1.12.00
To:
Radio image version: 1.15.00
Click update to continue.
and then...ERROR 101. CONNECTION ERROR...Click exit to quit
I'm using Windows Vista and XP. The same message in both systems.
The same problem with this SO roms:
- BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP
- RUU BA xplode WWE 6.10.00
Please, help me....
try to upgrade in "BOOTLOADER MODE".
press record+powerbutton then softreset while holding them. that will give you a "Serial X.xx" and if you plug it in the usb/cradle, it will turn into "USB X.xx"... then try the upgrade/flashing again.
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
entolium said:
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
Click to expand...
Click to collapse
Mine has ever shown any existing version, only shows what the new one will be. All my flashes have been fine. Did you try to continue and actually get an error, or did you stop when it "did't find your pda" ?
Win XP, Activesync 4.5 running
In Bootloader Mode (usb v2.07):
- Run upgrade
"Checking the information in your device...."
"Device CE image version: <empty>"
To "CE image version: <empty>"
- Click Upgrade
"Checking the information in your device...."
...........nothing.......i kill the process in task manager
In normal mode:
- Run upgrade
"Checking the information in your device...."
"Device CE image version: 5"
To "CE image version: 6.10"
- Click Upgrade
"Checking the information in your device...."
"ERROR 101. CONNECTION ERROR"
SOLVED
I'm SOLVED !!!!!!
I'm removed the SD card and ok
im glad you solved it.
just fyi...
you can continue flashing in bootloader mode even if the upgrade software doesnt show your current ROM version, just like Kasush said. it doesnt matter.