Sorry for my very bad english.
I have BA upgraded from W2003SE to WM6 (Helmi BA WM6 R0).
ROM Version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
ExtROM version:
I'm trying to upgrade Radio to 1.15.00:
MaUpgradeUt_noID:
Your device software is about to be update from:
Device radio image version: 1.12.00
To:
Radio image version: 1.15.00
Click update to continue.
and then...ERROR 101. CONNECTION ERROR...Click exit to quit
I'm using Windows Vista and XP. The same message in both systems.
The same problem with this SO roms:
- BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP
- RUU BA xplode WWE 6.10.00
Please, help me....
try to upgrade in "BOOTLOADER MODE".
press record+powerbutton then softreset while holding them. that will give you a "Serial X.xx" and if you plug it in the usb/cradle, it will turn into "USB X.xx"... then try the upgrade/flashing again.
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
entolium said:
MaUpgradeUt_noID can't find my pda in bootloader mode, the versions of SO, radio, etc, is empty.
Only appear when is in normal mode.
Click to expand...
Click to collapse
Mine has ever shown any existing version, only shows what the new one will be. All my flashes have been fine. Did you try to continue and actually get an error, or did you stop when it "did't find your pda" ?
Win XP, Activesync 4.5 running
In Bootloader Mode (usb v2.07):
- Run upgrade
"Checking the information in your device...."
"Device CE image version: <empty>"
To "CE image version: <empty>"
- Click Upgrade
"Checking the information in your device...."
...........nothing.......i kill the process in task manager
In normal mode:
- Run upgrade
"Checking the information in your device...."
"Device CE image version: 5"
To "CE image version: 6.10"
- Click Upgrade
"Checking the information in your device...."
"ERROR 101. CONNECTION ERROR"
SOLVED
I'm SOLVED !!!!!!
I'm removed the SD card and ok
im glad you solved it.
just fyi...
you can continue flashing in bootloader mode even if the upgrade software doesnt show your current ROM version, just like Kasush said. it doesnt matter.
Related
Any advice on how to achieve the upgrade. I have attempted with BAUpgradeUT and and MAUpgradnoid without sucess. My Rom version is 5.03.02 WWE (3/2/05) Radio Ver - 1.06.00, Protocol Ver 1337.38, ExtRom Ver - is blank. Getdeviceid recognises as a PH20B.
Using BAUpg is don't recognise device
Using MAUpg it correctly identifies CE image ver5. it goes to check information on device, Activesync shuts down, then Error 101 connection error
Any ideas ?
Connection error....
Have you tried putting the device into bootloader mode before cradling it?
I initially had the same problem upgrading my BA.
Press camera (media), record, power all at once while you reset. The screen should display "Serial" until you cradle the device, then switch to "USB."
Make sure you run the upgrade program twice, it often fails the first time.
Hope this helps, post again if this doesn't work.
Mick...
hey all I tried to put the upgraded cam patch onto my XdaIIi and it went wrong and now all the screen says is:
SERIAL
V1.01
whats wrong with it and more importantly how do i fix it?
thanks
put your device to the cradle and run the upgrade proses from your pc. Im sure you can done it.
Thanks
thanks cluster, its back to normal now I crapped myself for a minute
is this right?
ROM version: 1.11.00 WWE
Radio version: 1.04.00
Protocol version: 1337.42
ExtROM version 1.11.162 WWE
Yes, for some reason your device (correctly) went into Bootloader mode, but the process wasn't finished.
It doesn't matter, so long as you run the entire firmware flashing process from start to finish and keep the device in the cradle until it says finished on your PC, you should have no problem.
Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.
u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.
Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u
After a reset, my qtek 9090 displays "NO GSM" and "D 5.60.00 WWE". At device Information, shows:
Rom version: 5.60.00 WWE,
ROM date: 03/02/05.
RADIO version: (EMPTY)
PROTOCOL versionEMPTY)
and ExtROM versionEMPTY).
When i run an upgrade with "MaUpgradeUt_noID.exe" and nt.nbf, it works. But it dont accept radio_.nbf (ERROR 114).
Any idea? ty.
first try a soft reset (power botton + reset)
if u get still no radio
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
follow this great tutorial and u'll get radio back
I followed the wiki tutorial.
Still no radio rom...
Could it be more than a software problem?
Try to press reset once, and then before the R: NONE G: NONE and D: (something) appears press reset again.
This should normally happen when removing battery and it is a common problem.
Is that what's happening to you ?
JP
My device:
T-Mobile MDA III
ROM Version: 1.42.01 GER
ROM Date: 09/05/05
Radio Version: 1.13.00
Protocol: 1337.42
ExtROM: 1.42.116 GER
Windows Mobile 2003 Second Edition
Version: 4.21.1088 Build 15159.2.6.4
I want to upgrade to Win Mobile 6 and have read this post forum.xda-developers.com/showthread.php?t=630416
First i need to downgrade/move from the German to English Version ROM.
But it's not working. At step 11. it never shows me the Rom Version. Nothing.
I tried several times, i did everything step by step, no luck at all...
I own an iMac and tried this with Win XP via Bootcamp and VMWare Fusion. I have no problem to run Active Sync, the MDA is recognized, no known problems. Expect for the uprade.
My girlfriend has an windows 7 PC, should i try it?
I am at my wit's end and need your help.
i'm sorry for the inconvenience. i know about that bug, somehow the english rom i posted there, has a crc error. either you try the method for non-english roms and install the extrom unlocker and rename the Programme\ folder to Program files\ or you download an english rom from www.xplode.tk, xplode's shipped rom archive. i will exchange that rom for a working one, some time, when i got more time on my hands.
Thanks Tony,
the method with the renamed folder and the unlocker worked.
WM 6.1 with manila is running