While upgrading it will freeze at 59% and that´s it. - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hello!
I have two MDAIII.
Upgrading the first with the last german upgrade was without any problems. Upgrading the second (it´s the same) with the same upgrade version it works only until the uprade goes up to 59% and then nothing happens further.
Does anybody know why?
I have tried it a few times but every time with the same problem.
Afterwards I have running the old version which was on the MDA before and this one works (1.06) without problems.
I got NO error and no ID. It is only frozwn at 59%.
Thank you for hte help and best regards,
Peter

Hello again!
Nobody any answer for me?
Please be so kind if you have any tipp!!
Thank you,
Peter

Related

Stuck on 12%!

Im upgrading my xda11s to the latest official o2 upgrade. The problem is that it has installed the new radio version ok, but it has been stuck on 12% for about 3/4 of an hour installing the extended rom, and th pc doesn't seem to be doin anything. Can anyone give me any advice on what to do next thanx
neildunne said:
Im upgrading my xda11s to the latest official o2 upgrade. The problem is that it has installed the new radio version ok, but it has been stuck on 12% for about 3/4 of an hour installing the extended rom, and th pc doesn't seem to be doin anything. Can anyone give me any advice on what to do next thanx
Click to expand...
Click to collapse
just try again....
This happend to me and it was
an issue with my firewall.. it blocked the comunication.. I had to switch it off and start again... I think I was using zone alarm at the time.. If that helps

ROM for Ipaq h1940?!?

Hi folks,
I,ve shot my Ipaq with a damn ROM update (stuck in bootloader mode and no reaction at all). Now, as my warranity is gone loang ago, I had to pay to let it flash. After reading here a lot for my TyTN, I asked myself if there is anyone here who can help me with a ROM for this device. It´s a german Pocket PC 2003 PRO, but WM5 is also welcome.
This should be possible to do with mtty.exe, shouldn´t it?
I found an app at sf.net called "universal bootloader", especially for the HP devices. It also uses mtty, but I don´t know, what it tries to do exactly. This little app unfortunately doesn't help me. It prompts to upload now, but nothing happens then. They say it can restore a complete ROM out of an update. Maybe it can, on mine it can't...
Would be very glad if anyone could help me here!

Upgrade stop at 99%

hi everybody,
When I'm trying to upgrade my wizard, the process always stop at 99%.
I have try with several rom and it's always the same kind of problem. These just one Rom that is working the Wizard_Love_2.26.10.2.
Do someone have any clue of how to upgrade my phone with a wm6 rom?
Thank's a lot
How long have you waited? I've seen it sometimes take 10 minutes or something until it finished..
The windows sofware send me an error and then the update stop..
Your phone is locked. I had the same error, also need to lower your Rom.
I already have flashed my rom to a lowest one for instance "WM5SE rev 4.0 - WM5 without stylus but style" (this one work without any kind of problem). Then I have tryed to update with a WM6 one and it stop at 99% or I have the message "Invalid upgrade toll".
Do someone have had the same kind of pbl and solved it?
thank's a million
i had the same problem a few days ago and all i did was downgrade it to buttons rom and then upgrade it to the tomobile2.26 and everything installed correctly.

another failure at 80%

just attempted to upgrade mda compact 2 using :-
RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship.exe
from the t-mobile website , it loses communication at 80% and attempts a recovery this then fails this happens every time , any suggestions before it goes in the bin?
Try any other WM5 ROM for charmer. Or use the NoID RUU. It will flash it. Search for it in the Charmer forum.
Try this: http://forum.xda-developers.com/showthread.php?t=471490
In this package there is a NoID. so thanks rmagyar for pointing to it.
thanks for the comments but still a brick
thaks have tried the noid version which is suppose to help on hanged upgrades that didnt work I, have noticed on an old thread others hanging at 95% have used a radio version which I have also tried that didnt work, I have noticed that others have re-installed v2.6 and its been fine my problem is foolishly I did not bother with the backup , has any one got 2.6 or any other suggestions ...Thanks
There is one possible way. But nobody can say how it works. You have to do a upgrade with a SD-card. This is the ultimate solution. But I can't tell you how it works on Charmer I yust know it for the Wallaby. But you can just look in the Prophet forum maybe somebody there knows how it works.

Urgent Help Needed: Diamond stuck on the loading screen

Hi all,
Wondering if anyone had experience such problem before, and would know any solution to this problem, as per the title?
About two weeks ago, my Diamond could not load into the wm, and remains stuck on the screen.
I thought about doing a Rom Ugrade Utility, but since it cannot load into the windows for active sync, I wonder what else may I do?
If anyone has the answer to this, greatly appreciate if you may post your solution up.
Thank you!!
Hi,
If you haven't done it already, do a hard reset, maybe that works!
If not, try this:
When you're in bootloader screen,
plug in your diamond.
THere should appear the word 'USB' on your bootloader instead of 'serial'.
Then flash new HardSPL (I recommend 1.40 olinex http://forum.xda-developers.com/showthread.php?t=400950) via your pc.
After that it should be done!
I had the same problem as you, this worked for me!

Categories

Resources