I have done WM5 upgrades and was there when it all went down, but do I have to use the cradle to upgrade to the new TUMA version, since I am way back on the original one. I would just try it out and see what happens but I am on a mac and need to go locate a PC and such so it is kinda a pain for me. I am Italy right now and didn't bring my cradle because I am using a mac. I only brought my usb cable and use it to charge my phone. I am on an SX66 with the original WM5 port, and radio 1.13 so I kinda want to get 1.15 for that as well. Any answer would be a great help. I searched a little and couldn't cement down a straight answer.
Alex
No
You don't need to use cradle.
I'm also away from home and I'm using only USB cable. I have flashed my BA at least six times without any troubles.
Great, thanks.. now I just need a PC :? they need to get some mac support..
Related
I was wondering if anyone has had problems with their Infrared port on thier wizard. I have not been able to get mine working since the stock Cingular rom. Are their any .cab files or other drivers that may get this thing to work again or some diagnostics program? I'm running modified 2.24.10.1. ext 2.25.11.102 Tried a search but came up empty. I kind of miss being able to beam and sync via infrared.
Im not sure if its a problem with your IRDA, I have a feeling that the new activesync does not sync over IR.
Thanks Herman. I think I did hear about some removed features or problems with the new activesync. But my wizard will not beam or receive beams either. It really didn't bother me unitil I wanted to try the new Novii software and realize that my Infrared stoped working sometime ago. Any suggestions?
i could wirelessly connect via infrared with the latest activesync
Could it possibly be a hardware malfunction? I seems unlikely to me because of the few glitches this device reportedly had, IRDA wasn't one of them. Man I really hope its not a hardware problem.
it could very well be the hardware that's broken, i can't really image a way to test it properly so you know. Waht i do know if the device is within guarantee just send it back you get a new one
My IrDA works fine as well. ActiveSync 4.xx works with IrDA as well. The only problem I have is new laptops don't come with IrDA any more. However, they do come with Bluetooth and I use BT to do ActiveSync. No need to line up the ports and I can sync up to 30 feet away.
I suppose I could send it back in, I just did not want to go throught the trouble of locking it back up and putting the stock rom back on it. I know for a fact that it was working at one point because lined the port up with my laptop and it started to load wm modem drivers for some reason. Also it may very well be my ir port on my laptop because I cannot access my wireless link icon. Everytime I click it it does nothing. I forgot I had an old T-Mobile MDA collecting dust, so I'll try to beam to it.
Aaaah we.ll i had the idea you would have allready tried it on more then one device. Try send data(vcard, picture) by ir to a random phone that has an ir port and of course try reveiving something.
Good luck!
My mda worked perfectly, with my laptop that is. Could not sent or receive anything with the 8125. My last and final attempt will be a downgrade to to the stock rom, which is the last time I remember it working.
Hi Guys,
I'm a newbie with XDA IIi, just use it less than 1 month. I have a problem when I syncronize the device to the computer; there is no sound when I answer the call. The mobile is rings, but when I answer I did'nt find any sound from the caller. The device connected by USB Cable/Charger not by Cradle.
Note, that I have updated the ROM with PUG's ROM (Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed - thanks to PUG), but the problem is still done.
Thanks for help
Thuwailib
Sounds like a hardware problem...
If you just got the unit brand new and just replaced with a different ROM, I'm not sure if the warranty is voided.
But if it isn't, you can have it replaced or repaired from where you bought it from.
Thanks for reply. It's not a brand new, but the used one, I bought it without cradle and original charger, so must use the USB cable data for syncronizing and charging. Do you think it will be solved if I use the original cradle?
Basing on your first post, I don't think it will be solved just by using an original cradle.
Does your phone still work if it's not connected (USB/charger connected)?
If it does still work it might be software based. You could try returning the original ROM.
If it still does not work, it maybe hardware failure.
I've encountered the same problem many times. I use the USB cable and the docking port. I thought it was a usual issue, so I just unplug the cable before answering any calls.
I've same problem here, but not with my original dock, but only happen if i connect my PDA to PC using USB cable (I bought it seperatly). But if i connect using original craddle it have no problems at all.
Hi, Im having the same issue. Using the original ROM I didnt have this problem. But after upgrading using Deathnoise's ROM the sound no longer works when the USB cable is in. This a major pain, can anyone think what changes made in the updated ROM could have caused this?
Hi
Using an original O2 XDAIIi and an aftermarket USB Sync/charge cable i have no sound when connected, trifle annoying as i am using it to sync a third party mail application and don't get any audible notification. Don't have the cradle to hand to test with so can't pass any comment if that works or not.
The only upgrade was the official ROM upgrade from O2.
It's likely to be the connections on the plug end itself. See this thread I found on the subject, http://forum.xda-developers.com/arch.../t-245857.html, and this one for the connections. http://wiki.xda-developers.com/index...ame=Connectors.
I had the same problem, I cut both loop wires that go from pin 2, to pins 5 & 18 (on mine, the only two that looped back) and everything worked fine after that.
No sounds when answer phone from cradle
I have the same problem and I work around by sliding the volume button up and down after I remove the phone from the cradle and before answering the call. It is an annoying bug but I get use to it after a while. Now it is my habit to slide the volume button up and down every time I remove the phone from the cradle.
Hello, i have qteck 9090 and my USB connector on the PDA are Burned. so i can only use BLUETOOTH sync with my PC. Is possible make upgrade to WM6 by SD CARD only?
Best Thanks in advance
PAscal
I'm afraid the answer is no.
For the angel, one has to have a working USB connection. If there was a way to add SD card flashing (I made use of this today with my hermes, beautiful thing it was!), I would hope that someone would add it to the boot loader.
If I may ask, how did the connector on the phone end up ruined?
i connect a bad GPS/carcharger Haicom to the qteck. The model that i had whas IPAQ 2210 and the connector look the same. Now with the right cable e use it perfect with GPS cable and Charger. But no way to have a contact for the USB SYNC. ( device non found) Thats will i use BLUTOOTH SYNC.
Thanks for help
Ps
The only other way to upgrade without a cable is through the sd method as jdc has pointed out. Sometime ago, I needed to do the upgrade but could not find any help in that direction. My thread on that did not receive any replies.
sofene said:
The only other way to upgrade without a cable is through the sd method as jdc has pointed out. Sometime ago, I needed to do the upgrade but could not find any help in that direction. My thread on that did not receive any replies.
Click to expand...
Click to collapse
Actually, I pointed out that there is no SD Card method for the angel.
Wish there was. Flashing images from a SD card on my hermes is a beautiful thing.
I installed the Dutty's WM 6.1 Rom on my kaiser and it now won't have the speaker play when I put the tilt on loud. Also, I cannot connect it to my computer or anything else it charges but does not show up on the computer what do I do.
What you need is a new Radio. Try the one in my sig. There is a stickie in the other Kaiser forum saying that if you have camera problems or audio issues get a new radio.
Trust the stickies...they do no harm and only help you out. As far as this:"Also, I cannot connect it to my computer or anything else it charges but does not show up on the computer what do I do." I dont know how to help or offer a suggestion. Post more info.
Hope it works out for you.
Alright, so I just bought a Fuze on craigslist and it has a cooked rom on it and has deleted some software that I actually want- So the bottom line is I want to go back to the very original out of the box settings for at&t. Also, I did not get the data cable that came with the phone so I am just using a regular mini USB cable I got from frys. The problem is that when I run the windows mobile software on my computer, my computer can't connect to the device- does it have to be the cable that comes with the phone? Can having a rom that is flashed be messing me up? I'm really frustrated and would appreciate any and all feedback.
Thanks!
Topherficke said:
Alright, so I just bought a Fuze on craigslist and it has a cooked rom on it and has deleted some software that I actually want- So the bottom line is I want to go back to the very original out of the box settings for at&t. Also, I did not get the data cable that came with the phone so I am just using a regular mini USB cable I got from frys. The problem is that when I run the windows mobile software on my computer, my computer can't connect to the device- does it have to be the cable that comes with the phone? Can having a rom that is flashed be messing me up? I'm really frustrated and would appreciate any and all feedback.
Thanks!
Click to expand...
Click to collapse
To answer about the Mini USB cable, if its the 5 pin USB (same that used for most digital cameras) then that one works fine, without the adapter that comes with the phone, you wont be able to get headphones connected.
As for the OEM rom, I found it on here before, and I will try and find a link for you.
Edit: here is the link for the OEM rom (Latest) http://forum.xda-developers.com/showthread.php?t=439346
Topherficke said:
Alright, so I just bought a Fuze on craigslist and it has a cooked rom on it and has deleted some software that I actually want- So the bottom line is I want to go back to the very original out of the box settings for at&t. Also, I did not get the data cable that came with the phone so I am just using a regular mini USB cable I got from frys. The problem is that when I run the windows mobile software on my computer, my computer can't connect to the device- does it have to be the cable that comes with the phone? Can having a rom that is flashed be messing me up? I'm really frustrated and would appreciate any and all feedback.
Thanks!
Click to expand...
Click to collapse
List of all 24 Applications came along with ATT Fuze.
BlockBreakerDeluxe_105_signed.cab
Enable_TLS.cab
GetATTNavigator_NoTestAccount.CAB
GetMail_20080830_signed.CAB
HTCAP_Service_ATT.CAB
Java_Preloads_20081015_signed.CAB
JETCET5_PPC_v5.0.904.10.cab
JQ2_0-1-0_20080905_signed.CAB
MidnightPool3D_20080813_signed.cab
MobileBackup_1.0.0_signed_move_shortcut.CAB
MobiTV.3.0.4.68563_signed.CAB
Move_Camera.cab
MSFT_SecurityPolicyWorkaround.cab
MsPacMan_20080910_signed.CAB
MusicID_signed.CAB
OzIM.2.0.84.M.signed.CAB
PT_BlackSCR.CAB
PT_Manila_REG.cab
RaphaelPTT_2008_09_10_A.CAB
removeHiddenProxy4CWS.cab
restoreHiddenProxy4CWS.cab
Sudoku_0.11.66_signed.CAB
WM6_PPC_HTC_Opera9_WWE.CAB
XMRadio.3.0.4.68563_signed.CAB
http://rapidshare.com/files/169964613/HTC_Fuze_ALL_CAB_Files.rar