My tilt(HTC Kaiser) won't connect to anything - Tilt, TyTN II, MDA Vario III General

I installed the Dutty's WM 6.1 Rom on my kaiser and it now won't have the speaker play when I put the tilt on loud. Also, I cannot connect it to my computer or anything else it charges but does not show up on the computer what do I do.

What you need is a new Radio. Try the one in my sig. There is a stickie in the other Kaiser forum saying that if you have camera problems or audio issues get a new radio.
Trust the stickies...they do no harm and only help you out. As far as this:"Also, I cannot connect it to my computer or anything else it charges but does not show up on the computer what do I do." I dont know how to help or offer a suggestion. Post more info.
Hope it works out for you.

Related

To do a WM5 upgrade Do I need to use the cradle?!

I have done WM5 upgrades and was there when it all went down, but do I have to use the cradle to upgrade to the new TUMA version, since I am way back on the original one. I would just try it out and see what happens but I am on a mac and need to go locate a PC and such so it is kinda a pain for me. I am Italy right now and didn't bring my cradle because I am using a mac. I only brought my usb cable and use it to charge my phone. I am on an SX66 with the original WM5 port, and radio 1.13 so I kinda want to get 1.15 for that as well. Any answer would be a great help. I searched a little and couldn't cement down a straight answer.
Alex
No
You don't need to use cradle.
I'm also away from home and I'm using only USB cable. I have flashed my BA at least six times without any troubles.
Great, thanks.. now I just need a PC :? they need to get some mac support..

Wizard IRDA

I was wondering if anyone has had problems with their Infrared port on thier wizard. I have not been able to get mine working since the stock Cingular rom. Are their any .cab files or other drivers that may get this thing to work again or some diagnostics program? I'm running modified 2.24.10.1. ext 2.25.11.102 Tried a search but came up empty. I kind of miss being able to beam and sync via infrared.
Im not sure if its a problem with your IRDA, I have a feeling that the new activesync does not sync over IR.
Thanks Herman. I think I did hear about some removed features or problems with the new activesync. But my wizard will not beam or receive beams either. It really didn't bother me unitil I wanted to try the new Novii software and realize that my Infrared stoped working sometime ago. Any suggestions?
i could wirelessly connect via infrared with the latest activesync
Could it possibly be a hardware malfunction? I seems unlikely to me because of the few glitches this device reportedly had, IRDA wasn't one of them. Man I really hope its not a hardware problem.
it could very well be the hardware that's broken, i can't really image a way to test it properly so you know. Waht i do know if the device is within guarantee just send it back you get a new one
My IrDA works fine as well. ActiveSync 4.xx works with IrDA as well. The only problem I have is new laptops don't come with IrDA any more. However, they do come with Bluetooth and I use BT to do ActiveSync. No need to line up the ports and I can sync up to 30 feet away.
I suppose I could send it back in, I just did not want to go throught the trouble of locking it back up and putting the stock rom back on it. I know for a fact that it was working at one point because lined the port up with my laptop and it started to load wm modem drivers for some reason. Also it may very well be my ir port on my laptop because I cannot access my wireless link icon. Everytime I click it it does nothing. I forgot I had an old T-Mobile MDA collecting dust, so I'll try to beam to it.
Aaaah we.ll i had the idea you would have allready tried it on more then one device. Try send data(vcard, picture) by ir to a random phone that has an ir port and of course try reveiving something.
Good luck!
My mda worked perfectly, with my laptop that is. Could not sent or receive anything with the 8125. My last and final attempt will be a downgrade to to the stock rom, which is the last time I remember it working.

TyTN II USB Drivers?

My TyTN II isn't being detected by on my PC.. I've tried uninstalling everything and reinstalling everything, but no luck.
Where can I find USB drivers for the TyTN II? I don't recall installing it when I first got my phone, but someone suggested it, but I can't find it anywhere.
DVS_WiNdz said:
My TyTN II isn't being detected by on my PC.. I've tried uninstalling everything and reinstalling everything, but no luck.
Where can I find USB drivers for the TyTN II? I don't recall installing it when I first got my phone, but someone suggested it, but I can't find it anywhere.
Click to expand...
Click to collapse
Are you connected via a non-powered USB hub as this can sometimes cause a problem.
Have you tried a different USB cable? I spent a day trying to resolve the same problem on my Universal a couple of years back, only to find the cable was at fault.
EDIT: Did find one other thing a few months back. I installed one of those business card scanners to my laptop and found that whenever it was plugged in, my phone was no longer recognised.. Seems the scanner was pulling all the available USB power for itself.
I've tried 3 different cables on 3 different computers
I'm not using a USB hub..
Did you try changing the advanced settings for the USB-PC connection? I have had that, when I uncheck that box all is good.
Start->settings->connections->USB to PC-> uncheck Enable advanced network functionality
HTH
DVS_WiNdz said:
My TyTN II isn't being detected by on my PC.. I've tried uninstalling everything and reinstalling everything, but no luck.
Where can I find USB drivers for the TyTN II? I don't recall installing it when I first got my phone, but someone suggested it, but I can't find it anywhere.
Click to expand...
Click to collapse
I know this may sound stupid but you are using Activesync aren't you?
I just ask this as you have not mentioned it. A WM device will not be just recognised as a USB device like a printer or other peripheral.
maherb said:
Did you try changing the advanced settings for the USB-PC connection? I have had that, when I uncheck that box all is good.
Start->settings->connections->USB to PC-> uncheck Enable advanced network functionality
HTH
Click to expand...
Click to collapse
Tried that.. didn't work also.. do you remember if you had to install USB drivers for your TyTN II when you first got it? cause I don't remember..
Farsquidge said:
I know this may sound stupid but you are using Activesync aren't you?
I just ask this as you have not mentioned it. A WM device will not be just recognised as a USB device like a printer or other peripheral.
Click to expand...
Click to collapse
Yes I'm using activesync.
DVS_WiNdz said:
Yes I'm using activesync.
Click to expand...
Click to collapse
If you have tried it with three different PC's then it does sound as if the port on the phone may be at fault.
One last question, did it work before at all?
Anyone else with any ideas
Farsquidge said:
If you have tried it with three different PC's then it does sound as if the port on the phone may be at fault.
One last question, did it work before at all?
Anyone else with any ideas
Click to expand...
Click to collapse
Yes I've been using it for 4 months and had no problems. The port on my phone works, I've been using my headset and it charges when I plug it into my PC.
DVS_WiNdz said:
Yes I've been using it for 4 months and had no problems. The port on my phone works, I've been using my headset and it charges when I plug it into my PC.
Click to expand...
Click to collapse
Take a magnifier and look at the port under a good light. See if everything looks OK.
Also check another thread close to this one regarding battery drain whilst connected. Could be that you have a damaged port and it shows different symptoms to theirs.
Someone on that thread says it costs $80 for a repair but hang about a few days, someone may come up with a better answer for you.
Hope you get it sorted.
Farsquidge said:
Take a magnifier and look at the port under a good light. See if everything looks OK.
Also check another thread close to this one regarding battery drain whilst connected. Could be that you have a damaged port and it shows different symptoms to theirs.
Someone on that thread says it costs $80 for a repair but hang about a few days, someone may come up with a better answer for you.
Hope you get it sorted.
Click to expand...
Click to collapse
Port looks fine.. but my batteries draining.. This started 2 weeks ago.. and I've been charging fine.
No I do not remember if I installed drivers or not ... sorry. Try using bluetooth connection to sync. if all fails. I have had that with my old P910
I really think there is something going on here - I am starting to see loads of threads relating to this.
I am also having problems syncing suddenly. Started about 2 weeks ago. I have dual boot on my laptop - vista/XP and my Kaiser wont sync with either anymore.
It seemed to be charging fine up until yesterday when I again suddenly couldnt charge it from anything other than the official charger. Before that I had charged it on pretty much anything - my proporta power supply, sync cable attached to a USB plug, blackberry charger.
If its hardware then there is obviously a weakness with the USB connection as so many people seem to be experiencing similar things.
Maybe time to contact HTC although after their response to the video drivers, wouldnt hold up much hope.
chrisnash said:
I really think there is something going on here - I am starting to see loads of threads relating to this.
I am also having problems syncing suddenly. Started about 2 weeks ago. I have dual boot on my laptop - vista/XP and my Kaiser wont sync with either anymore.
It seemed to be charging fine up until yesterday when I again suddenly couldnt charge it from anything other than the official charger. Before that I had charged it on pretty much anything - my proporta power supply, sync cable attached to a USB plug, blackberry charger.
If its hardware then there is obviously a weakness with the USB connection as so many people seem to be experiencing similar things.
Maybe time to contact HTC although after their response to the video drivers, wouldnt hold up much hope.
Click to expand...
Click to collapse
Yep, crishnash, I think you are seeing the same as I am..
chrisnash said:
I really think there is something going on here - I am starting to see loads of threads relating to this.
I am also having problems syncing suddenly. Started about 2 weeks ago. I have dual boot on my laptop - vista/XP and my Kaiser wont sync with either anymore.
It seemed to be charging fine up until yesterday when I again suddenly couldnt charge it from anything other than the official charger. Before that I had charged it on pretty much anything - my proporta power supply, sync cable attached to a USB plug, blackberry charger.
If its hardware then there is obviously a weakness with the USB connection as so many people seem to be experiencing similar things.
Maybe time to contact HTC although after their response to the video drivers, wouldnt hold up much hope.
Click to expand...
Click to collapse
hmm.. right now I can still charge through the computer, I hope it doesn't come to that, cause I charge using computers very frequently.
Now linked to...
http://forum.xda-developers.com/showthread.php?t=362679
If you would like to contribute.
May seem silly to ask but have ou tried rebooting your computer and soft resetting your phone? (I have to soft reset mine about once every other day or this same thing happens to me.
ajmoncrief said:
May seem silly to ask but have ou tried rebooting your computer and soft resetting your phone? (I have to soft reset mine about once every other day or this same thing happens to me.
Click to expand...
Click to collapse
I've tried that so many times, I don't even remember how many.
ajmoncrief said:
May seem silly to ask but have ou tried rebooting your computer and soft resetting your phone? (I have to soft reset mine about once every other day or this same thing happens to me.
Click to expand...
Click to collapse
Yep done the standard stuff with people for the last 8 months. Whereas it may or may not be attributable with this problem... I am trying to collate data.
Trouble is, a trend is starting to occur with damaged (PHYSICALLY) mini-USB ports that are not done by the old 'Sticking the stylus in the port'.
There is a trend of failure when using a STANDARD mini-usb connector in this port. It is a non-standard connection so if failure occurs it needs to be rectified.
Hey, I aint doin a lawsuit, I am just working on a free refurb and advising HTC to modify AS IT SHOULD BE!!!
Just for grins, try to connect via IR or Bluetooth ...

Bluetooth Pan

Hi All
After looking at this amazing application - http://forum.xda-developers.com/showthread.php?t=427097 - I decided to install it, works great if im using the USB wire. But my problem is that Vista wont find my Diamond to connect it to a PAN, ive followed the information on that guide.
Ive tweaked my registry, ive also ran WM6BTPAN which doesnt seem to do much.
Ive also checked my MSI Btoes drivers on my pc. Im running Vista 32bit Business and its find actually pairing with my Diamond, but when it comes to actually setting up the pan, I just get that screen (image attached).
Anyone else having this problem?? or even better anyone else know how to fix this?
Thanks
I got the same problem with xp, too.
I have an Belkin USB adapter and I even started the bluetooth network from the pc with the Belkin software... and in "network connections", the icon looks like it has a connection, but the computer isn't receiving any packages (just sending packages).
So what do I have to do so my Vario IV will connect?
...
I just found out that there is no connection between my Vario Iv and my PC:
I turned my bluetooth on my phone off and let the PC connect with the bluetooth network and it says it's connected.
So, if anyone has an anwser to this problem, please help us.
Thx

TV out on the G1?

Is there anyway to broadcast the G1 to a tv. I know there a cable OEM HTC TV Out Cable ACT100 and it Compatibility for Dream and My touch 3G. Has anyone use this cable?
I haven't, but I never even considered this... I don't remember seeing anything about tv-out, and sometimes cable manufacturers will claim that it's compatible, when it really isn't. I hate to give you an "I don't know" answer, but I would like to help prevent someone from buying something that is useless to them. If you just go ahead and buy it, remember to post back here and tell us if it works!
Won't work.
I brought the act110 cable and it's not compatible with my g1. I also spoke to the people at t-mobile who informed me that g1 doesn't have the driver compatible with g1. It's a windows based software. I've also downloaded enable tv out cab on g1. Nothing seems to work.the enable tv out cab would more than likely work on a windows mobile phone along with the cable.
jrocs09 said:
I brought the act110 cable and it's not compatible with my g1. I also spoke to the people at t-mobile who informed me that g1 doesn't have the driver compatible with g1. It's a windows based software. I've also downloaded enable tv out cab on g1. Nothing seems to work.the enable tv out cab would more than likely work on a windows mobile phone along with the cable.
Click to expand...
Click to collapse
I also have the act110 cable, it works out of the box with my Touch pro 2 Winmo phone and I also have a G1 phone. Not only it software incompatible, it also don't have the hardware for TV-out for the G1. The .cab file is a Window mobile .exe equivalent and not Andriod(linux) OS file. Maybe future Andriod phone support it. We hope with mini-hdmi or a 720p and up tv-out.
In order to output to TV, you need to run a vnc server on the android phone, and link up with it using another computer plugged into your TV.

Categories

Resources