Related
Dear All,
I have tested TWO Universal and an Wizard with this configuration:
Universal with M5000 Orange UK ROM (Orange CH)
Wizard with T-Mobile Rom 2.17..7.2 WWE (Swisscom CH)
The DirectPush work perfect with my Exchange Server 2003 SP2. The New E-mail notification took 2-3 sec to arrive to the device since the exchange server received the e-mail.
When the device is switched on I see the notification message on the screen and I hear the sound.
When the devide is in standby i hear the sound and the vibrating device with blinking led, but the screen remains off.
Traffic: I have tested only 2 hours but I have seen that the device use 5-7 kb / hours with 0 e-mail.
Thank you very much to all xda staff!!
OK - I will bite on this one. How is your setup different from that of (I believe) every other Wizard owner who does not receive vibrating notificatios of an incoming email when the device is in standby (i.e., both backlight and screen are off)? I would really like to know as this is a major problem for me, and several others, as discussed on a number of threads.
Settings
Hi matchtrader,
First to know is that my first device is a Qtek9100.
Yesterday I downloaded the
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
and upgrade my Qtek.
With this release I had some problem with push (e-mail take 10 minutes or more).
After that I made some check on my exchange, just disabled the security. I made sure my account has Uptodate rights (user management)
After that I downloaded this ROM:
CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe
After the update I just set the notification "new e-mail message" to vibrate and blink.
If I can help someone I can set up some Exchange accounts to test
I work with an Exchange 2003 SP2 on Windows Server Enterprise 2003 R2 with Microsoft ISA 2006 Server Enterprise in loadbalancing (2 servers)
Re: Settings
Moresi said:
Hi matchtrader,
First to know is that my first device is a Qtek9100.
Yesterday I downloaded the
186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
and upgrade my Qtek.
With this release I had some problem with push (e-mail take 10 minutes or more).
After that I made some check on my exchange, just disabled the security. I made sure my account has Uptodate rights (user management)
After that I downloaded this ROM:
CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe
After the update I just set the notification "new e-mail message" to vibrate and blink.
If I can help someone I can set up some Exchange accounts to test
I work with an Exchange 2003 SP2 on Windows Server Enterprise 2003 R2 with Microsoft ISA 2006 Server Enterprise in loadbalancing (2 servers)
Click to expand...
Click to collapse
Just to be clear on this, if you put your device in standby (screen off), and send yourself an email, the device will vibrate when the email is pushed to your device?
You seem to be the only one of hundreds that this actually works for.
quick question:
When you go into activesync and tap menu followed by schedule, do you see an additional link to set for "as items arrive" or do you only see an Adjust peak times to fit your schedule link. These links are at the bottom of the screen btw..
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
fx4rover said:
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
Click to expand...
Click to collapse
fx4rover -- I am assuming you have the AKU2 ROM upgrade applied? What you are saying doesn't work for me and to my knowledge hasn't seemed to work for anyone else using what I understand to be the latest Qtek or K-Jam ROMS. Thanks.
On ActiveSync I see only one link at the bottom: "adjust peak times".
The first time I set up an account I see two links, but I've noticed that this happan if Exchange 2003 isn't configured for Push.
The first time The DirectPush button is pressed, the Device check if the server accept push and remove the other link where you can set the SMS address of the device...
When my phone is in Standby Mode and I receive an e-mail, I hear the sound, the phone vibrate e I see the light flashing... but the screen remains off and the phone remains in standby mode till i press the power button...
This works with my device and other 2 M5000 configured on our server...
Moresi said:
On ActiveSync I see only one link at the bottom: "adjust peak times".
The first time I set up an account I see two links, but I've noticed that this happan if Exchange 2003 isn't configured for Push.
The first time The DirectPush button is pressed, the Device check if the server accept push and remove the other link where you can set the SMS address of the device...
When my phone is in Standby Mode and I receive an e-mail, I hear the sound, the phone vibrate e I see the light flashing... but the screen remains off and the phone remains in standby mode till i press the power button...
This works with my device and other 2 M5000 configured on our server...
Click to expand...
Click to collapse
This is strange. Does anyone else running the T-Mobile ROM see this behaviour? Cerainly neither the K-jam ROM nor the Q-Tek ROM works this way as documented in numerous threads.
matchtrader said:
fx4rover said:
mine will make a sound and vibrate in Standby mode ONLY if I have the Outlook client hidden or closed in other words it works if you have the mail client on the background or closed at all
Click to expand...
Click to collapse
fx4rover -- I am assuming you have the AKU2 ROM upgrade applied? What you are saying doesn't work for me and to my knowledge hasn't seemed to work for anyone else using what I understand to be the latest Qtek or K-Jam ROMS. Thanks.
Click to expand...
Click to collapse
Yes I do have the update with the DirectPush, and since I applied the upgrade it has been working fine, I just need to have the mail client on the background, if I have it in front the notification will not work
this is the file that I used fot my phone, a Cingular 8125 :CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
@summiter:
Is the rom that fox4rover installed your Qtek based AKU2 customization for the Cingular 8125?
@fox4rover:
I have been unable to reproduce your success on my Qtek equipped 8125. I can get the light to flash, but vibrate doesn't work when I'm in standby mode. I specifically started outlook and made sure it was running in the background.
I have verified that if outlook is the foreground app then notifications seem to be completely disabled. That appeared to be the case on my original ROM when running AUTD1.0 as well.
@moressi:
Ok, I'm convinced you have AUTDv2.0 based direct push up and running on your device. Could the T-Mobile AKU2 ROM actually contain the vibrate fix?
well i'm using the exact same ROM (the Qtek 2.17 customized for Cingular ROM) and on standby (even with outlook in the background) i don't get the vibrate at all. i DO however get the LED flashing, but that's it. MS has said that they did not add this feature to save battery life.
Can someone please send me the instructions on how to set up push mail. I upgraded my 8125 to this ROM yesterday...
Qtek ROM RUU with CING Splash:
ftp://xda:[email protected]/Up...s/CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
after doing so I see new options in the COMM manager and I see an icon that appears to be a push email icon but when I try to select it it just stays greyed out, won;t do anything. Could someone please help me get this set up.
Thanks,
Geno
hpgeno said:
Can someone please send me the instructions on how to set up push mail. I upgraded my 8125 to this ROM yesterday...
Qtek ROM RUU with CING Splash:
ftp://xda:[email protected]/Up...s/CUSTOM_RUU_WIZARD_217_AKU2_CINGULAR_WWE.exe
after doing so I see new options in the COMM manager and I see an icon that appears to be a push email icon but when I try to select it it just stays greyed out, won;t do anything. Could someone please help me get this set up.
Thanks,
Geno
Click to expand...
Click to collapse
Have you tried setting it up through Active Sync by entering your exchange server settings when creating a new partnership?
I sure didn't. Do I need to create a new partnership to do this?
there's PLENTY of threads on how to properly enable push e-mail. but the gist is:
connect to an exchange server that has SP2 AND push e-mail enabled. enter the server settings in active sync on your phone (or desktop), then sync. push e-mail should automatically be enabled when you sync, and just make sure the push e-mail icon in teh comm manager is enabled. that's it.
hpgeno said:
I sure didn't. Do I need to create a new partnership to do this?
Click to expand...
Click to collapse
I'm sure their are other ways to do it, but I do it by creating a partenership via active sync on my laptop. You also need to make sure that push email is enabled on your and exchange server and it is running SP2.
Sleuth255 said:
@summiter:
Is the rom that fox4rover installed your Qtek based AKU2 customization for the Cingular 8125?
@fox4rover:
I have been unable to reproduce your success on my Qtek equipped 8125. I can get the light to flash, but vibrate doesn't work when I'm in standby mode. I specifically started outlook and made sure it was running in the background.
I have verified that if outlook is the foreground app then notifications seem to be completely disabled. That appeared to be the case on my original ROM when running AUTD1.0 as well.
@moressi:
Ok, I'm convinced you have AUTDv2.0 based direct push up and running on your device. Could the T-Mobile AKU2 ROM actually contain the vibrate fix?
Click to expand...
Click to collapse
Yep that's the ROM I built.
As for the T-MO AKU2 ROM, it is based on the QTek (as is mine), so its exactly the same save for the customizations in extended ROM.
One important note is that if you enter the SMS address for push, you will get an SMS charge for every e-mail retrieved. I noticed that this morning with my T-Mo service.
Unless there is a way to get around it... What is your guys' experience with this? Is there a way to not have to enter the device's address?
HazChem said:
One important note is that if you enter the SMS address for push, you will get an SMS charge for every e-mail retrieved. I noticed that this morning with my T-Mo service.
Unless there is a way to get around it... What is your guys' experience with this? Is there a way to not have to enter the device's address?
Click to expand...
Click to collapse
If you have to enter an SMS address for push, you don't have the latest ROM.
Greetings..
I installed the QTek 2.17 ROM a couple days ago, the one done by summiter, for Cingular, but i opted to reset before the Extended ROM could execute. I manually set all the GPRS and other settings to what they should be, and everything is working smoothly except for MMS..
I have all the server settings in it correct, but I don't have MMS showing up in Outlook, just Outlook Email and Text Messages. Also, if I try to go to Picture viewer, and select a picture and select "send via MMS" it does nothing..
Any way to get this to work, without reinstalling the ROM and letting the Extended ROM run? is there a CAB file somewhere that will put just the MMS application back into Outlook and give it funtionality? I found the CAB file to install the server settings via a search on the forums, and used that, it updated the server settings for MMS and all perfectly, but the actual MMS functionality isn't there...
Help please!! I am in need of sending a MMS picture to my girlfriend's phone of me and her 3yr old daughter, she's on a business trip and she misses us..
g0nk said:
Greetings..
I installed the QTek 2.17 ROM a couple days ago, the one done by summiter, for Cingular, but i opted to reset before the Extended ROM could execute. I manually set all the GPRS and other settings to what they should be, and everything is working smoothly except for MMS..
I have all the server settings in it correct, but I don't have MMS showing up in Outlook, just Outlook Email and Text Messages. Also, if I try to go to Picture viewer, and select a picture and select "send via MMS" it does nothing..
Any way to get this to work, without reinstalling the ROM and letting the Extended ROM run? is there a CAB file somewhere that will put just the MMS application back into Outlook and give it funtionality? I found the CAB file to install the server settings via a search on the forums, and used that, it updated the server settings for MMS and all perfectly, but the actual MMS functionality isn't there...
Help please!! I am in need of sending a MMS picture to my girlfriend's phone of me and her 3yr old daughter, she's on a business trip and she misses us..
Click to expand...
Click to collapse
The MMS account and other related registry keys are set up by a couple cab files in ext ROM. You could download the zip'd up extended ROM that's on the ftp and you'll find the necessary cab files inside.
g0nk said:
Greetings..
I installed the QTek 2.17 ROM a couple days ago, the one done by summiter, for Cingular, but i opted to reset before the Extended ROM could execute. I manually set all the GPRS and other settings to what they should be, and everything is working smoothly except for MMS..
I have all the server settings in it correct, but I don't have MMS showing up in Outlook, just Outlook Email and Text Messages. Also, if I try to go to Picture viewer, and select a picture and select "send via MMS" it does nothing..
Any way to get this to work, without reinstalling the ROM and letting the Extended ROM run? is there a CAB file somewhere that will put just the MMS application back into Outlook and give it funtionality? I found the CAB file to install the server settings via a search on the forums, and used that, it updated the server settings for MMS and all perfectly, but the actual MMS functionality isn't there...
Help please!! I am in need of sending a MMS picture to my girlfriend's phone of me and her 3yr old daughter, she's on a business trip and she misses us..
Click to expand...
Click to collapse
What are you using for your GRPS settings? Cingular has 2 different accounts to authenticate with... asp.cingular and isp.cingular. I have problems with MMS when using isp.cingular.
--JAS
Does anyone have Windows Live working correctly on their Tilt or TyTn II????
UPDATE 01/15/2008
Ok I am resurrecting this issue as I still can not get any version of Windows Live to run reliably on my Tilt! Does anyone have a .cab install of WL (any version) that pushes Hotmail consistently????
Original Post:
I have been trying to get Windows Live working on my Tilt for the past 72 hours and I am totally stumped.
I have been able to sync my email, contacts and even log on to messenger, but for some reason Windows Live keeps getting stuck in the Checking Internet connectivity step on the sync screen. When I soft reset my Tilt, WL will keep saying Checking Internet connectivity until I force a send and receive. It then throws up a sync error (with no error message), but appears to successfully sync. Then it sometimes pushes email as it should for a few minutes, but then gets stuck in Checking Internet connectivity again.
I had this issue running the stock HTC ROM and austinsync's BigStorage w/ PIE fix ROM on my Tilt. I have used the At&t connection settings from HTC Connection Setup tool both Media Net (w/ and w/ out Proxy) and ISP.Cingular. I have also used a Cingular Network Cab file that I used with my 8525.
All other applications are getting internet connections no problem (including Live Search - the mapping program).
I have tried messing with the GPRS Always on Reg tweaks [ HKLM\Comm\ConnMgr\Providers\{7C4B7A38-}\Connections\|gprs connection name (my Isp/MediaNet} \AlwaysOn = 1 (DWORD decimal) ] , but that has not fixed the problem.
I have tried WL versions 10.6.0033.600 and 10.6.32.2100 along with whatever version came on the HTC stock ROM.
Does anyone have Windows Live working on their Kaiser??? If so, what Device, ROM, and Carrier are you using??
So no one has Windows Live working correctly on a Kaiser????
I have been using WL version 10.6.0033.600 on my Hermes with no problem at all. I even spent the last hour pouring over the registry of my 8525 and comparing it to the Tilt, but I could really use some help looking for a solution.
mines is working.. I'm using a Kaiser with BigStorage w/ PIE fix ROM with T-mobile service.. It was working with stock rom also.. I've used stock windows live and Windows Live 10.6.32.2100.. both worked fine.
So WL is working fine on T-mobile(US??). I am really starting to think this is an issue with the At&t network/proxy.
Anyone on At&t network have WL working correctly??
edit
By working correctly, I actually mean Pushing emails as they arrive. I am able to manually pull emails down, but I am trying to get the WL push email functionality working on the Tilt over At&t.
I am using build 10.6.32.2100 on AT&T with a Tilt and everything including push email is working for me. I am running the HTC ROM.
rkorzuch said:
I am using build 10.6.32.2100 on AT&T with a Tilt and everything including push email is working for me. I am running the HTC ROM.
Click to expand...
Click to collapse
Did you use the HTC Connection Setup tool to configure your network settings, or enter them manually? Also, are you using the proxy or is it disabled?
njmarchetti said:
So WL is working fine on T-mobile(US??). I am really starting to think this is an issue with the At&t network/proxy.
Anyone on At&t network have WL working correctly??
edit
By working correctly, I actually mean Pushing emails as they arrive. I am able to manually pull emails down, but I am trying to get the WL push email functionality working on the Tilt over At&t.
Click to expand...
Click to collapse
If you look through these forums, there's a pretty long thread of people who have issues with their device not waking up to pull down emails.
In short, if you turned off your screen by tapping the side power button (instead of letting the screen turn off on its own), the device will not reliably wake up for either timed email pulls or push email.
I discovered this with push Hotmail - never had a successful push with the device manually hibernated, but push worked fine if the device was on.
I stopped using Windows Live because it had LOTS of issues when the device was in an area with bad/no coverage, it would make my Tilt EXTREMELY sluggish and unresponsive with that little color wheel appearing every few seconds if I had login information recorded and the phone was not in good coverage. Windows Live even pulled the phone out of flight mode to try and make a connection at least once, I wouldn't want that happening on a plane!
I let the network wizard setup the connection but edited the ISP connection to use the wap.cingular access point. Windows Live works for me with either the medianet w/ proxy or the isp connection
Yeah WL is definitely not the most reliable application to begin with, but I finally had it working like a charm with my 8525 runnning vp3G's ROMs.
Now on the Tilt I can't even get it to push email when the device is on and has a full connection.
The fact that WL is constantly stuck in the Checking Internet Connectivity step leads me to believe that there is some issue with WL opening up my Data connection on the Tilt. I have absolutely no issue connecting with PIE or Live Search.
Unfortunately I use Windows Live to manage all my emails and contacts, so I am pretty much stuck with trying to make it work on the Tilt or take it back.
I have the stock rom for the tytn 2, nothing altered, and my WL works without any problems when set as push mail and disdplay as full html format, if using it in hotmail, the ppc will default it to a simplified version.
kms
Windows Live Search working fine on my Tilt reflashed to HTC on ATT
I am also having the problem with it grabbing my email as it comes in.
RacerX10 said:
Windows Live Search working fine on my Tilt reflashed to HTC on ATT
Click to expand...
Click to collapse
same here. no problems.
WL is not even letting me log on! It says my user name or password is incorrect and its not because I checked by logging on in hotmail.com on my desktop.
just to clarify, I am having connection problems with Windows Live, the hotmail/messenger application, NOT Live Search the mapping application available from wls.live.com .
I have been having much better luck with Push email coming through since using the Connection Setup tool again to reset my network settings and disabling the Media Net proxy. Hopefully this keeps up tomorrow.
is it possible to have window live to push FEW email accounts at the same time?
CorruptedSanity said:
WL is not even letting me log on! It says my user name or password is incorrect and its not because I checked by logging on in hotmail.com on my desktop.
Click to expand...
Click to collapse
is this in the push mail message section, did you set it up manually or automatic?
either way it's won't work, even if you put in all the correct settings. You will need to go into the start/program then click the windows live icon and set up from there and have ticked the sync email, once completed setting, you will need to log into msn messager, then soft reset afterwards.
now window live hotmail should show up in the push mail section.
after many trys and error, i can confirmed it works for me.
hope this helps.
kms
All I did was select the WL icon and then log on.
Im not sure what you mean by sync mail and so on.
Ive done this:
Start > programs > windows live (icon) > clicked on Sign in to Windows Live > Accept user agreement (I do) and then at the screen where I need to input my user and password I get the error about mismatched username and/or password.
The Options and Account options menus are grayed out (not able to select).
I get this error
Sign-in Failure
Either the user name or the password you entered is invalid. Please try again.
Click to expand...
Click to collapse
@CorruptedSanity
I metioned this in another thread, but are you sure you have the correct keypad layout?
For example if you have a Tilt and flashed an HTC Rom, your keyboard layout will not match the letters/symbols printed on your keyboard. The same would be true if you flashed a TyTn II with a Tilt Rom. You could check by typing your password into pocket Word and making sure it is correct.
The only other thing I can think of is to make sure your date and time is set correctly. Windows Live has some issues logging on if the date and time on your device do not match the WL Server.
What ROM are you running?
Did not flash my rom! Straight out of the box TyTN II (unlocked).
Ive been typing a whole lot and nothing seems out of place.
How do I know which time WL is on?
How do I check which rom im running?
I have received a HTC TYTN II from my company, which currently is synching with our mailserver so that I can read my email wherever I am.
Since I'm curious, I tried to get my old Wizard to do the same. I did the same install as with the Kaiser, but I get the dreaded "0x85010004". I scanned thru the Kaisers registry and took all root-certificates under "HKEY_LOCAL_MACHINE\Comm\Security\SystemCertificates" and imported them into the Wizard and rebooted, but no luck. I am assuming it's a certificate of some kind that is missing, but I can't find where else it could be? Does Exchange install a hidden certificate on the phone in order to identify it, and if so - why isn't it shown in the certificates menu?
Any help is appreciated.
BR
Fredrik
activesync cert with exchange
hi fredrik,
activesync accessing exchange on a mobile device uses OWA (outlook web access) to access your email through SSL. the best way to get the cert you need is to log into your OWA (probably something like https://webmail.yourcompanyname.com) or whatever it is (it's the same address you use when you put in when confiigure exchange with activesync) from a desktop pc. than, right click on a blank portion of the page and go to properties. you should see a button that says certificates, click on that, than click on the details tab. than click on the "copy to file" button and the cert export wizard will start. click next, than select base64 as the type of cert, than hit next, name it, save it, put it on a memory card or bluetooth the file to your phone and install it. sometimes, during the install, your phone will error out when installing it, just soft reset, and then install it again. you should get a message that says it was installed successfully. than configure for activesync for exchange on your phone and you should be all good. let me know if that works for you.
Thanks for the help!
Tried that and got the same problem. The original phone has Pointsec installed in it, but I do not think that it gerenates any certificates (at least not any I have found in the registry). Is the ACU version important?
/F
Talked to my IT department and they told me that Pointsec decodes a certificate in order to communicate with our mailservers. Anyone any good at pointsec and knows if it puts a crypto on the Registry or if it is purly file based? If the file is decrypted each time I punch in my code, it should register the time when the file is being decrypted... What programs can search files in WM and search for the time stamp?
BR
Fredrik
I have an AT&T Tilt. I had Direct Push from Exchange Server working perfectly with no effort - was working for months. Then, I had a hardware problem with that phone and was given a replacement from AT&T. After replacing it I am unable to configure the direct push any more. I wrote down all the settings and carefully reapplied them on the new phone.
What I am seeing now is when manually invoking a send/receive, ActiveSync reports the following:
------
Result:
The server you are synchronizing with is not an Exchange Server, or is running incompatible
software. Choose Configure Server on the ActiveSync menu to specify the correct server.
Support Code: 0x85030022
------
I've been on the line with the hosted exchange server folks and there's no change on their end...
I installed the certificate as suggested above - seemed like it was worth a shot. No difference.
Any ideas?
sorry for the late reply.
I'm not too sure about your pointsec fredrick, as we don't use it on our mobile devices at work, but we do use it on our computers. as far as i know, pointsec is supposedly suppose to be transparent encrypt/decrypt after you first turn on your device and enter a passcode, heck, windows mobile should operate like pointsec isn't even on the device, so it shouldn't be a cert issue, but who knows, i never liked pointsec anyway. sorry i can't be more helpful.
ubetchya,
that error message is pretty straight forward, either the OWA address is wrong or your certificate isn't installed correctly. i know this sounds lame, but if you can, borrow a friend's Windows Mobile phone and config it with activesync to verify your settings are correct. for the owa address, try adding "/exchange" without the quotes at the end, maybe their redirect isn't working correctly. so if your server address is "https://webmail.hostedexchange.com", make it look like "https://webmail.hostedexchange.com/exchange" (that should take you to directly to the exchange server without using their redirect). if you want, you can also try downloading the certificate directly from your hosted exchange guys, if they have the cert page up that is (most exchange admins leave it up, i know we do =P ) to get to the cert page, go to a desktop pc...
1. type in your webmail server address and add "/certsrv" at the end without the quotes (ie; "https://webmail.hostedguys.com/certsrv"
2. it will prompt you for a username, it should be in the following format "domain\username", so if my domain was microsoft, and my username was bill, than my username would be "microsoft\bill" without the quotes
3. enter your password.
4. click on the last link, "download a certificate, certificate chain, etc"
5. select the base 64 encoding method and than click download CA certificate.
6. save it to a memory card or bluetooth it over to your phone and install it.
hope that helps!
oh... and one more thing about your server address, it could be different than adding "/exchange" at the end, to verify, just to your webmail and see wear it redirects, when you get to your login page (if using forms based authentication), use that address, if not using forms based, (small popup window for login) just log in and than use that address.
UBetchYa said:
I have an AT&T Tilt. I had Direct Push from Exchange Server working perfectly with no effort - was working for months. Then, I had a hardware problem with that phone and was given a replacement from AT&T. After replacing it I am unable to configure the direct push any more. I wrote down all the settings and carefully reapplied them on the new phone.
What I am seeing now is when manually invoking a send/receive, ActiveSync reports the following:
------
Result:
The server you are synchronizing with is not an Exchange Server, or is running incompatible
software. Choose Configure Server on the ActiveSync menu to specify the correct server.
Support Code: 0x85030022
------
I've been on the line with the hosted exchange server folks and there's no change on their end...
I installed the certificate as suggested above - seemed like it was worth a shot. No difference.
Any ideas?
Click to expand...
Click to collapse
I got it working. The error message was pretty close to telling me that it's an invalid server "name". My hosted exchange provider uses owa3.... I was missing the all-important 3.
No matter how hard they try, programmers can't make it completely idiot proof...
All is working now beautifully. Thanks much for the suggestsions.
Tytn II
Hi there,
I'm trying to connnect my Tytn II to my work's exchange server so I can use it instead of having to use a Crackberry however I'm getting the following message in ActiveSync:
Support code # 0x85030022
The server you are synchronizing with is not an exchange sever, or is running incompatible software. Choose Configure Server on the ActiveSync menu to specify the correct server.
Can anyone help ?
Hi Smooth,
Have you tried all the steps in this thread already? make sure you have installed the correct certificate, have the correct server address and ask your administrator if activesync is enabled on the exchange server. post back with your results to the tricks in this thread and we'll see what else you can try.
I recently had to hard reset my phone (after fiddling with the new Manilla version posted elsewhere on the forum) and restored my settings from a backup.
Since then I've been finding annoying little differences in email behaviour:-
1. In the menu, the send/receive option is permanently greyed out.
2. When I select to download the rest of a message (I have it set to headers only) instead of downloading immediately I get a message saying it will download next time I send/receive.
I used to have push email set up and working fine with our exchange server, so now I'm baffled. I have to keep popping into Activesync and hitting "sync" all the time. The ActiveSync options all look absolutely fine, as do all the Outlook options.
Where should I be looking to change this behaviour?
Kind regards
Dave
Interesting, this problem went away completely after flashing the new HTC ROM update. You live and learn