Related
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
Hello All,
I was just wondering if any of you have come across the following problem.
My wife and I both have HTC P4350 devices that are not SIM Locked in any way.
When we were using WM5 the devices worked perfectly, but with WM6 after a while, the ring-tone (and all audio that we play on the device) is played faster (and at a higher pitch) than usual. It sounds almost as though someone is spinning the LP record too fast
Has anyone here come across the same problem? If so... do any of you know of a solution as it is a really annoying fault.
Before anyone asks.... I have found this problem on 3 devices now, so I don't think that it is a problem with the actual devices.
Any comments would be appreciated.
Nicholas Cross
ring tone
I have Imate JAmin. It also was working finewith mw5 but with theupgrade to MW6 I am facing the same problem spicialy with MID ringtones
any solution?
Hello,
I am sorry to hear that you also have the same problem. Sadly, I don't have a solution, and no-one else on this site seems to have this problem.
I wish that I could answer it!!
I have since tried the update on a third device and it also has the same problem.
It is definitely a problem with the ROM!!
If you hear of a solution, I would LOVE to know about it.
Thanks for you info.
Nick
Hello again,
I was just wondering if you have found a solution to the audio problem yet.
Could the problem be due to the network provider? Which network provider do you use?
I have now tried the upgrade with 3 different machines, and they all have the same problem.
Is it even possible that this type of problem could be caused by the network?
Any opinions would be gratefull!!!!
Nick
i was just wondering if you found a solution to this problem. because i use HTC Tough with WM 6.1 and have the exact same problem.
Thanks
Luke
I have been using my HTC Touch for more than 1 and half year, recently it start to have this problem, mp3 or ringtone become fast (high pitch). Any solution???
Hello I am also having this issue with a Tmobile Dash. I am using Kavanah's WM6.1 ROM.
I was wondering is this an issue that can be fix by changing something in the registry? I did a hard and soft reset on this device. It worked the first time I played an mp3. Once I used it a second time it started playing fast.
I've been searching the forums and I landed on this threat. I will keep on searching.
Thx
I have the same problem!
Please, pitch is no good.
Anyone help me?
My e-mail is [email protected]
Thanks.
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
raevinor said:
Hi guys!
I've just upgraded my phone from wm5 to wm6.1 but i encountered problem regarding with the wifi. my wizard can't conect to any wifi but it can detect any presence of wifi around. i've tried to hard reset it but the problem remains the same. i don't know what to do.
and also, upon upgrading, my phone lost the voice tag(voice dialer) program. i want to have it back because i just bought a bluetooth headset that supports voice dialer.
thank you in advance!
Click to expand...
Click to collapse
The wifi might be a problem of authorizations, MAC filtering, etc...
Upon upgrading your phone did NOT lose voice tag, instead the chef who cooked the rom you're using decided not to include it. Either you get the program and install it or install a rom that has it
hey ya'll, (may be wrong place for this, so my bad) -- I just recently had to hard reset because I installed kaiser notifications and when ever I'd get a missed call, it never stop playing the missed call sound...
so after hard resetting, I now get the 2 arrows with an X for the GPRS/EDGE/3G icon -- I've searched around and haven't found a fix (I tried deleting my connection settings and re-entering them, but doesn't work)
tia for any suggestions!
jrinco11 said:
hey ya'll, (may be wrong place for this, so my bad) -- I just recently had to hard reset because I installed kaiser notifications and when ever I'd get a missed call, it never stop playing the missed call sound...
so after hard resetting, I now get the 2 arrows with an X for the GPRS/EDGE/3G icon -- I've searched around and haven't found a fix (I tried deleting my connection settings and re-entering them, but doesn't work)
tia for any suggestions!
Click to expand...
Click to collapse
I was told the fix for this yesterday and made a CAB for it.
It's a problem with Diamond/Raphael based ROMs.
Ta
Dave
ah, thanks! however, I tried it and it didn't fix it (and I did a soft reset afterwards too)
jrinco11 said:
ah, thanks! however, I tried it and it didn't fix it (and I did a soft reset afterwards too)
Click to expand...
Click to collapse
You should add the following key to the registry:
HKLM\Software\Microsoft\Shell\Taskbar
Add a DWORD called LegacyGprsNotification = 1.
This should work after a soft reset.
I not, you'll have to try another ROM. It is a problem with the newer ROM ports.
I know raiisak has fixed in his new beta ROM.
Ta
Dave
DaveShaw said:
You should add the following key to the registry:
HKLM\Software\Microsoft\Shell\Taskbar
Add a DWORD called LegacyGprsNotification = 1.
This should work after a soft reset.
I not, you'll have to try another ROM. It is a problem with the newer ROM ports.
I know raiisak has fixed in his new beta ROM.
Ta
Dave
Click to expand...
Click to collapse
unfortunately still doesn't work -- And I've been using L29 v9 for a while now, and the gprs icon never had an issue -- it's just after I now did hard reset that this started happening
doh, just found out what it was! I had installed a different dialer which upon uninstalling it fixed my issue.... haha
thanks for your help though, I appreciate it!
The thing is like this, when I have one program running with GPRS connected, the incoming call will reset the phone.
Does anybody know how to fix this, will ROM update fix this?
louislinyx said:
The thing is like this, when I have one program running with GPRS connected, the incoming call will reset the phone.
Does anybody know how to fix this, will ROM update fix this?
Click to expand...
Click to collapse
did you try a hard reset? (remember make backups)
if hard reset doesnt work (or if you want) you can update the ROM and do the MITTY.
Mitty will solve your problem, but as I said, you can try a hard reset first.
Hi
I have the same problem with my htc touch...
can you help me?