Updated Radio only, unexpected Hard Reset - PDA2, XDA IIi, 2020i General

I have several Qtek 2020i units, and I decided to use one as a test unit to guage which ROM is best for our business needs.
I grabbed the latest files from the FTP and got to work.
Once I had radio 1.04.0 I decided to flash it into the one that I use as my regular phone, with contacts and programs installed to make life easier.
I have done this on my Universal and updating the radio didn't cause a hard reset, I just hit the soft reset and all was well.
I followed the same procedure on the Alpine and when I hit the reset it went into an automatic hard reset.
I don't know if this information is mentioned anywhere in the ROM upgrading threads, but I think it should be.
Glad I had a backup, but some people doing this might not.

It is normal duder!!

Related

****** Experiment Gone BAD ******

Things were good for a while but now it all has gone to ****s.
My BA is having issues and not only with BT. I have managed to enable big store using exttools.exe and repart_doc.exe. The only issue is that I guess that has wiped the hidden rom where all the preinstall apps were.
To make a long story short, I had reinstalled the original rom, from a rom dump I did right when I got the device, however, the device, even after hard reset does not run the usual set up utilities that it did and install the junk my telco has included. While for the most part this was not a big deal now I realize that some of the fixes were needed.
For example I used to have BT xxx.3500 now I have xxx.3900 all find and dandy but with both versions my BT will not stay up for more than 2 minutes before it drops the connection.
On soft reset I get the following error message.
Cannot find "storage" ( or one of its components) Make sure the path and filename are correct and all the required libraries are available. Bugger
So now the question is - IS there a way of making these apps run and if so, how or is there another fix that can be done. MY BA is bleeding and it is dying and it is pissing me off.
After all the restores I can see the Extended_ROM on the PPC once again and all the apps in it, just can't run any of the darn things.
BTW, as my signature says this is BA from Telus and it is running on CDMA. which btw is missing from the WWE version on http://wiki.xda-developers.com/index.php?pagename=BA_Versions
Any insight would be appreciated.
If I understand everything correctly, you've effectively wiped the Extended ROM and are using it, along with your Storage as one big "persistent storage" folder on your BA, which is what those programs were designed to do. Everything you did, functioned as it was supposed to.
If this is not what you want, then you might try reflashing your device with the last ROM you got from your carrier and see if that restores everything.
I did just that, and I did flash the device with the "virgin" rom which I have uploaded to wiki. But somwhere along the line something just does not jive. While preforming a hard reset the device would normally auto config itself with all the junk that the telco has put on the device including a number of patches and what not. That function does not run anymore, which is what causing me grief. If I unhide the ROM I can see the files that are supposed to run, including the autoexec.exe all there. I try to unlock to copy these files and run them manually but I am not allowed to copy them anywhere. and while I try to use EXTTOOLS.exe to unlock the ROM thing just go south. It says that the ROM is unlocked but I am still not able to copy any of the files from the ROM.
szamot,
there is nothing availble yet for our phones to update them or make them any better...
I can't believe you tried messing with your harrier... just wait a while until sprint releases their update to the ppc6600. (fingers crossed) we should be able to do something then...
all of the roms you see here (so far as far as I know) are for gsm units, and their roms will NOT work with our cdma's. WAIT!!!!!
Hopefully you can get things back to normal.. otherwise your gonna have an expensive pile of nothingness to work with.
good luck.
as i side note wiki has 4 cdma roms.
Actually I uploaded the rom because it seemed to be the newest one at the time.2.04.00 WWE, I also upgraded the BT to xxx.3900 which all worked fine. However somwhere along the line the Ext Rom got screwed, even though I can see it I can't get at it. Not all is lost however I just procured the contents of the rom from a new device, and even though I run all the fixes and updates and patches the PPC still runs like crap. Even hard reset does not get the unit back to its original state.

No Radio and No IMEI

Hi all,
I have a great problem that alone I can't resolve.
I have read for some days and for many hours the forum and wiki but I havemn't found the solution for my problem or more probably I don't know how to apply the solution.
I have a v1620,
the w2003 work
but no radio and no imei.
I have tried to install only the radio rom, the completely rom, the original rom but
I get always some errors like country id error or connection error(but the connection work fine).
Originally my pda was Ph20B2 now Ph20b(after an upgrade).
Now I am stuck with no radio and no solution.
I've tried to use ba and hauppage.
Someone can help me?
No radio & IMEI
try to press softreset yet? This happen to my BA as well when i take out the battery and open it first time i have to press soft reset 2 time to let the radio and rom version appear on boot screen
I've tried reset
I've tried with hard and soft reset but doese't work my radio.
I think the problem is more difficult to resolve.
I think that I have no radio rom installed.
thanks

Kaiser sleep function does strange things... (FIXED)

After I did a hard reset, a strange problem appeared.
When I press the power button to put the device in sleep, it does, but after 4-5 seconds it automaticly switches back on.
I tried several things such as soft resetting the device, close all running programs and even another hard reset, but it won't work. I didn't install any programs so far...
More information about my ROM version etc.
Official HTC NLD Rom WM 6.1
ROM Version 3.29.404.0
Radio 1.65.17.56
I hope someone knows something I can try...
rubinho93 said:
After I did a hard reset, a strange problem appeared.
When I press the power button to put the device in sleep, it does, but after 4-5 seconds it automaticly switches back on.
I tried several things such as soft resetting the device, close all running programs and even another hard reset, but it won't work. I didn't install any programs so far...
More information about my ROM version etc.
Official HTC NLD Rom WM 6.1
ROM Version 3.29.404.0
Radio 1.65.17.56
I hope someone knows something I can try...
Click to expand...
Click to collapse
i see you have already tried the following but i'm going to write down how i would go about debugging the problem anyway. first, i would try the following steps in the following order to ensure it is not a software issue (it seems you have already eliminated the possibility that this is a software issue):
0. ensure you are using the correct hard SPL for your ROM. if you have never flashed a custom ROM and if you are using the ROM that came with your phone factory installed, you need not worry about this step or step 2 onwards
1. hard reset your phone and check the behavior of the sleep button BEFORE installing ANY of your favorite cabs and software...you have already done this
2. it is recommended to re-download the ROM image and re-flash it to minimize the possibility of a corrupted download or a bad flash
3. it is also recommended to hard reset your phone immediately after flashing the ROM at the point where it says "tap here to begin", i.e. before the screen alignment wizard
4. once again, test the behavior of the sleep button BEFORE installing ANY of your favorite cabs and software
now lets assume it is a hardware issue...here is a nugget of information that might help you. i remember reading a thread here started by a person who described a problem very similar to yours. it involved a "stuck" camera button. you see, the camera button is TWO-stage...and if the half-press stage is "stuck", your phone will never go to sleep properly. search for this thread for more information.
finally, if this is indeed a hardware issue, it seems strange that it appeared only after you did that very first hard reset...but life is full of coincidences !
good luck!
thanks for your suggestions, I will try them and post results.
no success
I tried the things you suggested, but it doesn't work. I also tried the power button when it says "tap your device..." but the device woke up after 4-5 seconds also.
I checked my buttons (especially the camera button, but that one seems to be well... I can feel the two "clicks" and I can take a picture in a normal way)
I'm thinking it might be a ROM problem or something like that... (but my problem is, if I want to go back to the previous official HTC ROM, the 6.0 one, I probably have to use HardSPL, but I don't like that much because of warranty...)
Ok other question... Can I install the Dutch Vodafone ROM on a non-branded HTC device, or could I get VendorID errors or something similar if I want to keep the original SPL?
fixed!
Ok, I fixed it after installing HardSPL 3.29 and flashing the latest WWE ROM...
Now my power button works perfectly!

Weird Problems & Diamond almost dead (software/ROM)

Some days ago, i've flashed my phone to get an "up-to-date" ROM. I chose "PDACornerIllusion 21139" of 2009.03.06. All went fine excepting the keyboard of my GPS wont work anymore (dunno why of course), so i re-flashed with another ROM.
I was surprised that my phone kept the CornerIllusion BootScreen, but i didnt care.
All of a sudden, after having soft reset the ROM i chose (the 2nd one), for an installation of some proggie. The ROM restart as brand new asking me to reset the screen, the clock, date etc... losing all my content and customizations. Then i couldnt sync with Outlook after the first sync i've done minutes ago (error code 800004005). I've decided to soft-reset the phone, and now, TF3D wont even start, (it selft tries to start several times, then gives up), AND the programs lists is all broken, no shortcuts left and the games folder is named *h1/4Eg+รง^, nothing works anymore.
I flashed with about 4 roms (including Aztor one), resulting in the same mess.
Does it have something to do with the first one "PDACornerIllusion 21139" and its still remaining BootScreen?
Can i flash my phone from its roots, to get rid of this ?
As it's maybe not the "fault" of PDACornerIllusion, i write this in this section of the Diamond general thread and made a double post at PDACornerIllusion development thread
I suggest you perform a hard reset before flashing any new rom and that you use the traditional "flash-from-PC-using-ActiveSync-connection" method to flash.
And above all I wish you luck!
What was the other ROM you flashed? I am curious.
rondol1 suggests you hard reset prior to flashing a new rom. I suggest you hard reset after flashing a new rom. Net result is probaby much the same. You could even just do a hard reset now with whatever is loaded and things will probably improve. Main thing is...whenever you flash a rom do a hard reset straight after loading it. I always do this religiously and with the exception of one recent rom I tried I have never had a problem.
First of all, thank you both for trying to suggest hints, i really appreciate it.
I've never hard reset the ROM before or after having installed a new one. I never have a problem before.
For the last 2 months, i was on NEON 1.28, then i've decided it was time to update seeing the new features of the more up-to-date ROMs
I've just reflashed it (an hour ago) with PDACornerIllusion 21139, i've hard reseted before and after. let's see how it turns out ....
I've tried NATALY, CLOUDY, MORNA & AZTOR, no luck with any of them, all died after a soft reset or after the 1st sync (reconnecting for a 2nd sync).
Maybe the problem comes from the very root of the phone (like BIOS in a PC, dunno), maybe something in there got corrupted. How to repair it if my guess exists and is it repairable?
dunnno said:
I've never hard reset the ROM before or after having installed a new one.
Click to expand...
Click to collapse
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
logger said:
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
Click to expand...
Click to collapse
completely agree with logger - hard reset after you flash any ROM. I haven't used PDACorner - so can't say for sure... but do the flash via CustomRUU once... when the new ROM is flashed... do a hard reset as soon as it's complete..
good luck!
let's see then, >>>>crossing fingers<<<<
I've had this happen a lot lately as well. Might have something to do with the newer SYS? Anyway, hard reseting hasn't always fixed it for me. However, flashing back to the Sprint stock ROM (or HTC stock for you GSM guys) then flashing a new custom ROM has always done the trick. Maybe because the stock ROMs are bigger and "clean" out the memory somehow? At any rate, flash stock and then you're good to go. No permanent damage.
no luck, after a 2nd soft-reset, the phone is asking "touch the screen to configure for the 1sy use blablabla", all data's lost again & again...
what do you mean by stock Rom ? the rom that came with my phone when i've bought it ?
I've got the same problem with the Diamond rebooting like a hard-reset. But I always did a hard-reset after a fresh install. I blamed it on the rom and tried several others, including donsalari's "Clean Basic Rom", the Gen.Y Sense 2.1 and 2.5 versions and an older Aztor rom. Same problem every time, the first reboot after changing the device locale works fine, then I set the whole phone up properly and on the next reboot it will come up as if had performed a hard reset.
Additionally, the file system on my internal storage got corrupted somehow, had to reformat. At some point, I also had the impression that data on the phone memory got lost gradually. First the Contact's numbers got replaced by some nonsense characters, then there were numbers and contacts missing, and finally I had no contacts at all. ActiveSync stopped working so I was in the middle of a trip without my phonebook...
I've got two hypotheses:
1) The Gen.Y bootloader messed with the phone (Had tried the Sense 2.5 Gen.Y rom before donsalari's)
2) Flash controller or Flash itself is broken
@dunnno: I suggest you rename the thread to something like "diamond hard-resets on 2nd reboot after rom install"
edit: oops, just realised I resurrected a very old thread... Maybe there's a fix already?
My diamond still suffers from this problem. I tried it again and again with different roms but everytime, at some point all my configuration is lost and the diamond reboots like after a fresh install. Can anyone please help?
I'm having this problem as well :|
Grr, I have to rely on my phone for so much, but it just doesn't want to work correctly.
Help is immensely appreciated.
Well, I got mine to work, I just flashed the stock HTC ROM and everything has gone back to normal. H3PO, I suggest you give that a shot if you are still having problems.
I had these problems when I first started flashing my Diamond with custom roms.
Now I always flash my carrier stock rom first, then hard reset, then flash custom rom, then hard reset and I never have any problems. I have no idea why flashing the stock rom first stops the problems but I haven't had any problems with the dozens of roms I've flashed using this method.
Also I always flash from internal storage, but others prefer using MTTY
I still have some problems with the Contact Database, but flashing some stock O2 Rom solved the "reboot as new" problem.

TyTN II problem restarting

When i restart it activates the first time installation thingie... it does it even with shutdown and soft reset and hardreset.
i used 3 roms and they all did the same thing
enter the first time installation thingie
can any1 help me?
I got caught in a loop one time when i was trying to do a hard reset. When it came back from clearing the memory and I did the calibrate screen thing, I would soft reset prior to the bloatware installation. When it restarted it would go right back into the clearing data screen of the hard reset.
Eventually I let the bloatware install, then did a hard reset and that seemed to clear it out.
Not sure if that will help.
I have no idea what you just said .. :$ sry
but is there a way to TOTALLY clean my Pocket pc?
chimera_nl said:
I have no idea what you just said .. :$ sry
but is there a way to TOTALLY clean my Pocket pc?
Click to expand...
Click to collapse
A Hard reset will wipe out everything that you have installed on the phone, and you will be back with the operating system, whether it is a custom rom or an ATT Rom or HTC Rom.
Are you talking about wiping the "hard drive" clean with no operation system? I do not know how to do that, but why would you want to do that anyway.
phooey, i'm having similar problems... hard reset (holding soft keys and pressing reset with stylus) doesn't stop the issue from happening again. -- back to factory reset when rebooting either soft or hard. not sure if this is the same issue...if so i double posted sorry.
hey jklarich, you have posted a new thread:
http://forum.xda-developers.com/showthread.php?t=564537
...so consider this post of mine a reply to this thread as well as the one created by you (referenced above).
NEITHER of you have mentioned WHICH ROMs you tried when the problem started.
NEITHER of you have mentioned the HardSPL version(s) you have on your devices.
NEITHER of you have categorically clarified that you have gone through the steps in the FAQs of the ROMs you've tried.
BOTTOM LINE: always provide more information!
now with lack of information, using my "mind reading skills" (well actually they're just logical, deductive, and analytic approaches with a touch of human psychology and n00b-behavior-predicting voodoo magic), i will reason as follows:
seeing as how BOTH of you are junior members and how BOTH of you mention experiencing the issue with THREE ROMs, i suspect you must have coincidently tried the top three most popular WM6.5 ROMs, which would be TPC's, abusalsa's PDA Corner, and one other.
THIS IS A KNOWN ISSUE WITH NEARLY EVERY WM6.5 ROM! it is mentioned in the FAQs on the first page pertaining to each of the popular WM6.5 ROMs for the kaiser. the workaround/solution is mentioned in the FAQ!
the above "flame" is based solely on the assumption that you both tried WM6.5 ROMs without reading/following the suggestions in the FAQs. if you have indeed tried the magical step in the FAQ that should fix this problem but yet the problem remains, then i'm sorry about the unnecessary flame and i hope you find the solution to your problem.
Even though the TPC ROM says it's worked out, install the factory ROM first. That fixed the problem for me. Sorry, but I think this is valid only because TPC states quite clearly that they think they sorted out this problem on their thread.

Categories

Resources