Hello,
Sorry for my english but i speak french. I already seek on the forum, in google, I do not manage to find the response to my problem. So, can you help me.
I have a qtek 9100 1.6.7.2 fre that I want to upgrade into 2.17. Only it does not manage to rock in mode bootloader and I obtain then an error message 260.
Tank you for reply.
Did you unlock it first?
yes, i have unlock it. i have tested different roms, no more luck!
i have hold voice and photo button and then soft reset for bootloader but it's the same... no bootloader.
I have another qtek 9100 and no problem.
Related
Hi,
I have a Vodafone VPA Compact II (HTC Wizard) in German.
I will relocate to USA and I want to update my phone OS etc. into English (Cingular ROM).
I know that I have to first unlock my phone and I used both Lokiwiz02b and aWizard 1.3 beta 2 in order to unlock my phone. And these programs let me know that my phone is unlocked.
"Your phone is now unlocked...."
I have tried both "U. Unlock" and "C. CID Unlock (SuperCID)".
Than I have tried to install Cingular ROM "RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe" but I still get error msg 294.
Than I tried other Cingular file "Cingular_Custom_AKU2.3_Combo_Installer_V1.exe" and it was installed without any problem. But I have still German in my phone. As I understand this file installs only Extended ROM of Cingular.
Now I need to install an English ROM and when possible a Cingular one.
Any tip?
:?:
I have found a solution.
Lokiwiz02b does not work for AKU2 ROMs. I've just downgraded my ROM into an older version and than applied Lokiwiz02b CID unlock with success.
Than I upgraded my ROM into new Cingular 8125 one and works great!
help on Cingular 8125
Hello Web dev90,
Could you please tell me more about the way you upgrade your Cingular 8125 to English ,how to down grade ROM?
Thanks very much
Cingular 8125 (IPL/SPL 2.25.0001), SIM/CID Lock!
I used Lokiwiz03 to unlock the SIM, Success!
I download the dopod chinese rom to upgrade,after upgrade,can boot once in chinese rom. i found IPL change to 2.25, but SPL no change.
Afer i reset the phone, it Can't power On,no respond!
anyone can help me?
you bricked your wizard by flashing g4 unit with g3 ipl/spl. now you can throw it out or send to me (this is impossible to repair - maybe in future Jtag will help but it takes years?)
please - read more in future!
(sorry for my english)
i have tried to change from Danish to english or swedish on my Qtek 9100..
i have tried to unlock it
i have tried to remove CID
but i still get the message ERROR 300 and that i understand is that is some problem with RUU.
Can someone help me
BR
Markus
Check if your unit if G3 of G4 (Refer to the Wiki)
i m having qtek 9100 (g3)i dont know which language it is? by mistake i upgraded to custom rom without unlocking cid.. i stucked in 98% n bootloader screen appears... i want to change in english language. itried several roms.. but the same problem. plz guide me out of this. i wanna my cell started...
in the netherlands the qtek's are sold without a simlock
however, there is a possibility that there is a cid-lock.
to remove this, read the wiki.
but first flash it with an original qtek rom
http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
then cid unlock it and flash it with the rom you want
rom probs
hi, sorry im new to the site but i noticed you have the same rom as me (1.37.401.3 WWE) i cant seem to unlock the CID, on command it comes up with "could not update itsutils.dll to the current version, maybe its in use" any help would be much appreciated.
p.s i have already flashed it to get that rom so im not sure if i need to find a new one or it can be resolved...
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Piechcio said:
hello.
i had problem with wizard. i tried to upgrade rom, but i cant. it stuck on 99% and gives an error. i think it had cidlock, but i cant unlock it from bootloader.
Please help...
Click to expand...
Click to collapse
Download official stock rom of your carrier and flash it in bootloaders to recover back to its default working status,then if its a G3 phone, downgrade to ipl/spl 1.xx by flashing Button's Rom and SIM/CID unlock with lokiwiz02b,but if its a G4 ,it cannot be CID unlocked but can be upgraded to wm6 through 'SoftSPL' or 'HardSPL'.
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
jalalkarimi said:
HI
I have a same problem – I have a qtek 9100 G3
ipl-spl 2.17
GSM 02.07.10
OS 2.17.7.2
I can update my rom completely but after restart freeze on ipl-spl screen
And I can’t warm reset it says FORMAT PARTITION FAIL
I try to downgrade my rom but spl freeze on 2.17 – I try button rom and Xda_MiniS_LaunchROM_v154102
I can’t find any official qtek rom for test
And I also try R2SD all with romupdate115 it not work
help please
Click to expand...
Click to collapse
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
zabardast_1 said:
You got to have a CID unlocked phone to upgrade to any wm6 Rom.Sometimes SPL do get stuck up at 2.xx while downgrading with Button's Rom,it takes a couple of tries to get it downgraded to 1.xx.Flash the button's rom a few times more till it gets downgraded.You can only CID unlock your phone,if it has IPL/SPL 1.xx.
Download the official stock Qtek Rom from this link:-
http://forum.xda-developers.com/showthread.php?t=342744
Click to expand...
Click to collapse
Don't use those ROMs as they are for G4!!!
If flashing original ROM doesn't solve the case then you'll have to buy the unlock program from IMEI-check company.
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
jalalkarimi said:
Many thanks
Can you give me some advice what is the best version for qtek 9100 I can’t find any original qtek rom please give me a link
And if I buy IMEI Program after apply that my device starts normally?
I don’t want WM6 only back to normal
And serious problem is
I have FORMAT FAT FAIL for warm reset. In this case its possible hardware (disk on chip) has a hardware problem?
Thank you all
Click to expand...
Click to collapse
No. the problem is simply of messed up firmware. I believe that the SPL tries to load the OS but it must be at a different address and never starts to load.
The IMEI-check tool will simply CID unlock your device. You still have to do the "r2sd all" procedure...
good luck