Thanks all.
First I had the IVan ROM. I wanted to try TuMa.
I flashed the ROM and did a reset. I didnt do the NO-YES-YES sequence. (I forgot it). It went to the regional settings and welcome screen and all went fine. It installed CAB from EXTROM folder and then it reseted.
Now the screen was in colored stripes for more than 20 minutes.
So, I did a hard-reset... with N-Y-Y option. Now the screen remains in WHITE Screen.
Please help
I re-flashed he ROM. No use.....
Any help / hint would be appretiated
EDIT - downgrade procedure is also not working
Try re-flashing again. But before put it in bootloader mode. Press Power + Record + Reset, untile the screen reads "Serial", then flash.
I hope it works for you.
Thanks ahegazi.
Your suggestion didnt work. But this worked http://forum.xda-developers.com/viewtopic.php?p=284574#284574
Great. I'm happy that problem solved
Related
Hi all,
I copied EnterBL.exe to my MDA III and now it immediately switched to a bootloader screen. The bootloader Ver is 2.05.
I have tried, resetting, hard-resetting and holding down Camera+Power and pressing the reset button, but nothing seems to work. Every time the bootloader ver2.05 screen comes back.
Any ideas? Help please [/b]
Try to reflash the rom. It may be a good excuse to upgrade to 1.40. You can find out how, here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
Other than that, I can't imagine what else could work.
Problem Solved
Thanks a lot. Even though ActiveSync was not connected, still running the upgrade programme worked and now I am running a 1.40 i-mate Rom. Lets see how it goes.
Once again thanks a lot.
No problem. Writing that wiki page once took out all the work of explaining it each time .
Phone model: Blue Angel
++++++++++++++++++++
After I've installed the new WM2k5_AKU3.2_32mb_v1.3.2, it
run the Extrom automatically.
Once I've achieved to GSM provider setting, the phone restarted
immdiately and hold in the white screen page.
After i've hard re-started the phone, no matter what I've done,
I can't run out the OS 2005 pocket PC even I've tried to press
the record and cam buttons or re-installed the WM2k5_AKU3.2_32mb_v1.3.2.
Pls. advise if you guys have kinds of solutions and experience.
Or Pls advise if any softwares can format the ROM data and re-install
the pocket PC 2005 or old version.
Pls. share and help!
Millions thanks, Martin!!!
how sad...
btw, have you tried hard resetting your device? Still has problem? I have experienced that kind of problem, my device stuck in either white screen or the 4 color stripes. but that was due to extended rom resizing, after hard reset, my device stuck in whitescreen.
So try downgrade ur rom to 2003se by using maupgradenoid.exe.
Try this, this method hard resets your device and fixes booting issues
It works!!! Thanks your help!!! Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
It works to me too....thanks a lot
About a year ago I flashed my fresh p4350 with (if I well remember) Aserg's rom. I was quite a noob and I don't remember if there was any warning about the IPL<4 warning. So I got a brick ever since.
I just turns on and gets stuck on the white HTC logo, the boot with the camera button pressed works and appears "USB" on the bottom while line.
I looked for some fixes on this forum but I didn't see anything helpful.
Do you now how/if I can unbrick it?
Somewhere to start
Send it to me Ill fix it and use it...nah, Im just kidding. Try looking up hard slp, or you can put your phone in bootloader mode and flash a stock rom. But with Hard slp ur flashing from the sd after...should help you. Another suggestion is to take the radio out of the rom your flashing. Look all of this up, it may help you.
Your problem could be solved: You have to 1st) do a hard reset
then flash with original flashfile, and its done
I don't remember what I did last time I tried but it worked perfectly, I just opened the original updater
HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe
when the phone was in the bootloader and it worked.
Well, now I need to change the language
I tried to HardSPL it now but it says that the image is corrupted, so I'm going to download it again and try again.
Thanks a lot!
.... unless anyone wants a P4350 in Spanish, pretty much new, unfortunately never used...
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
bayxsonic said:
I did the HardSPL, and installed Touch-IT v4 just to see it. Now I tried to install the original Italian ROM
HTC_P4350_ITA_4.17.408.2_4.1.13.44_02.94.90_Ship.exe
it didn't work, the PDA restarted itself in the normal mode and the updater sais there was an error. Now I used the Touch-IT ROMUpdaterUtility with the Italian RUU_signed.nbh
It worked! Hope this would help someone else too
Click to expand...
Click to collapse
Help........
I have the same problem, but I Danich......help me
After I did a hard reset, a strange problem appeared.
When I press the power button to put the device in sleep, it does, but after 4-5 seconds it automaticly switches back on.
I tried several things such as soft resetting the device, close all running programs and even another hard reset, but it won't work. I didn't install any programs so far...
More information about my ROM version etc.
Official HTC NLD Rom WM 6.1
ROM Version 3.29.404.0
Radio 1.65.17.56
I hope someone knows something I can try...
rubinho93 said:
After I did a hard reset, a strange problem appeared.
When I press the power button to put the device in sleep, it does, but after 4-5 seconds it automaticly switches back on.
I tried several things such as soft resetting the device, close all running programs and even another hard reset, but it won't work. I didn't install any programs so far...
More information about my ROM version etc.
Official HTC NLD Rom WM 6.1
ROM Version 3.29.404.0
Radio 1.65.17.56
I hope someone knows something I can try...
Click to expand...
Click to collapse
i see you have already tried the following but i'm going to write down how i would go about debugging the problem anyway. first, i would try the following steps in the following order to ensure it is not a software issue (it seems you have already eliminated the possibility that this is a software issue):
0. ensure you are using the correct hard SPL for your ROM. if you have never flashed a custom ROM and if you are using the ROM that came with your phone factory installed, you need not worry about this step or step 2 onwards
1. hard reset your phone and check the behavior of the sleep button BEFORE installing ANY of your favorite cabs and software...you have already done this
2. it is recommended to re-download the ROM image and re-flash it to minimize the possibility of a corrupted download or a bad flash
3. it is also recommended to hard reset your phone immediately after flashing the ROM at the point where it says "tap here to begin", i.e. before the screen alignment wizard
4. once again, test the behavior of the sleep button BEFORE installing ANY of your favorite cabs and software
now lets assume it is a hardware issue...here is a nugget of information that might help you. i remember reading a thread here started by a person who described a problem very similar to yours. it involved a "stuck" camera button. you see, the camera button is TWO-stage...and if the half-press stage is "stuck", your phone will never go to sleep properly. search for this thread for more information.
finally, if this is indeed a hardware issue, it seems strange that it appeared only after you did that very first hard reset...but life is full of coincidences !
good luck!
thanks for your suggestions, I will try them and post results.
no success
I tried the things you suggested, but it doesn't work. I also tried the power button when it says "tap your device..." but the device woke up after 4-5 seconds also.
I checked my buttons (especially the camera button, but that one seems to be well... I can feel the two "clicks" and I can take a picture in a normal way)
I'm thinking it might be a ROM problem or something like that... (but my problem is, if I want to go back to the previous official HTC ROM, the 6.0 one, I probably have to use HardSPL, but I don't like that much because of warranty...)
Ok other question... Can I install the Dutch Vodafone ROM on a non-branded HTC device, or could I get VendorID errors or something similar if I want to keep the original SPL?
fixed!
Ok, I fixed it after installing HardSPL 3.29 and flashing the latest WWE ROM...
Now my power button works perfectly!
hello!
I am new here and i got one big problem.
So please help me!
I tried to flash my tytn II with this rom(ENDED- 28/V/2009 Anryl WM⑥.⑤ 21725 FINAL ULTIMATE(101RAM) -ENDED- ), but when i finished the flash, my phone want to boot. It stops on black screen and show "HTC"
If someon know how to fix it, please help me!!
R 1.27.16.21
G 22.52.88.13h
D 3.34.00.00
did you flash jumpspl and hardspl first?
Yes i did.
I did everything like it said in http://forum.xda-developers.com/showthread.php?t=433835 and my phone is stuck in bootloader. So how can i reflash it? i tried to flash it again with sd card but when i use power + camera + stilus to get bootloader, in a second there is a white screen where is written that there is no image, and it go back to three color screen mode, and in the bottom is a white screen where is written "serial"
When i try to flash it with activesync there is an error 262. I spend a lot of time reading many posts here, but i did not find enything what help me.
Any sugestions?
Thanks!
Bro, did you solve it? please let me know. Same issue and as described in the faq's tried using MTTY but that one also does not connect.