Dear Experts,
I have just got a WM5.0 device and using the latest agilemessenger 3.0beta.
I have been using agilemessenger for years and I was very happy with it.
However, i find the messeger got cut off or the application stop running after a while of idle with GPRS connection.
Any method i get maintain the connection for a long period of time.
Thanks.
Related
Hi folks
Just moved on to the Tilt from my trusty wizard 100.
all is good except that unlike the wizard the tilt does not turn off the radio after a program request and uses it.
Example my weather program updates at certain times of the day - it normally would fire up the radio (EDGE or GPRS) and when it is done it disconnects..and all is good.
The tilt does not want to do this... Pesky really as when I awoke this morning It had been on for 6-7 hrs or more.. bummer anyone know of an app or a setting????
Cheers
Bob
bobannesley said:
Hi folks
Just moved on to the Tilt from my trusty wizard 100.
all is good except that unlike the wizard the tilt does not turn off the radio after a program request and uses it.
Example my weather program updates at certain times of the day - it normally would fire up the radio (EDGE or GPRS) and when it is done it disconnects..and all is good.
The tilt does not want to do this... Pesky really as when I awoke this morning It had been on for 6-7 hrs or more.. bummer anyone know of an app or a setting????
Cheers
Bob
Click to expand...
Click to collapse
If you are looking to shut off the EDGE Connection after use then use KaiserTweak(its in my signature)
KDKobes said:
If you are looking to shut off the EDGE Connection after use then use KaiserTweak(its in my signature)
Click to expand...
Click to collapse
Thanks for that I'll give it a try
use a proxy
inactivity when using a proxy server for few minutes disconnects your 3G or Edge so your data disconnects when not needed. you can try that.
kaisertweak ftw?
Hi members,
I'm really stuck with a strange problem. I can't sync remotely with my mail server using ActiveSync.
I mean, the device syncs perfectly with my home PC, but when I program it to sync with my ISP's Exchange server it doesn't work.
The process stops and the device gives a "Repllog.exe error".
This problem started since I upgraded my HTC TyTn II to WM 6.1.
Any thoughts?
I'd be very much obliged for any thoughts that you might have on this subject...
Regards,
Ricardo
RickFerreira said:
Hi members,
I'm really stuck with a strange problem. I can't sync remotely with my mail server using ActiveSync.
I mean, the device syncs perfectly with my home PC, but when I program it to sync with my ISP's Exchange server it doesn't work.
The process stops and the device gives a "Repllog.exe error".
This problem started since I upgraded my HTC TyTn II to WM 6.1.
Any thoughts?
I'd be very much obliged for any thoughts that you might have on this subject...
Regards,
Ricardo
Click to expand...
Click to collapse
I think there is a bug in repllog.exe on WM 6.1 - it crashes overnight, every night, on my Touch Diamond2.
Cheers, Rob.
Same here, every night, on a Touch Diamond (2.03 ROM.)
Doesn't seem to do any damage or freeze the phone, just plain annoying.
Hunter_I said:
Same here, every night, on a Touch Diamond (2.03 ROM.)
Doesn't seem to do any damage or freeze the phone, just plain annoying.
Click to expand...
Click to collapse
It is improved in WM6.5 but still not 100% perfect. Also there's a bug in the schedule feature. I've just been to Egypt on holiday and most definately changed my ActiveSync to "Manual" for both peak time and off-peak as I didn't a) want to run up £7.50/MB roaming or b) be bother by work emails.
But my work emails sychronised somehow when I landed back in the UK. I'm hoping this was when it returned to UK 3G (please!!) but it shouldn't have done it as it's still set to manual and I definately didn't click sync. Phone was off in the overhead lockers.
Cheers, Rob.
Hello,
I have been given (kindly) due to a dying SE750i a xdaII
I have set up the docking station and downloaded Activesync from Microsoft however when I plug in my xdaII into the dock the sync window appears with the little window informing me it is retrieving my settings with a spinning green graphic.
It has been doing this for 20 minutes now. Initially I thought it had crashed so I removed the phone and got the message telling me it cannot sync as the phone is off, so I placed the phone on again and it started to sync again.
It is charging fine,
The Activesync I downloaded is Version 4.5 from
http://www.microsoft.com/windowsmob...ulas/eula_activesync45_1033.mspx?ProductID=76
The xdaII software seems to be ROM version
3.50b.40CS (ROM date 01/13/07)
Can anyone help me get it to connect so I can start to make the phone mine.
Managed to Sync however still think my firmware is out of date, any clues on that?
Also noticed my connection settings for MMS and also mobile web seem to be not there.
Currently using O2 can anyone help on this?
Thank you
Two things:
You have posted you have a XDA II, but this is the forum for the XDA IIi, small difference in name but big difference in what it will do. The IIi, aka Alpine, has WiFi and is stuck on WM2003, the XDA II, aka Himalaya, doesn't and isn't.
If you search on this forum elsewhere you should find a CAB file with the settings for O2, they may even be on the O2 site itself.
Hi,
I am sorry for boring people to death with this question, but I happened to scan this forum and other forums for a solution and found a zillion threads about battery life but no answer fro my specific concern.
When I use push or auto checking (5 minutes) with Exchange Server 2003 and WM 6.1, the battery will get killed when Activesync cannot connect to the Exchange Server (e.g. no reception). I can get this "fixed" by using manual sync, but I would really like to have mails pushed.
I am using an Aztor ROM 2.03.407.3 GER on a T-Mobile MDA Compact IV with 1.09.25.33 radio. I was hoping that somebody else did have this problem and flashed a different ROM (I am happy tp try 6.5) and got it fixed. I had this same problem with every ROM I tried.
Regards
Hannes
I never used A/S with Exchangeserver - do you need to be connected to your computer or is Exchangeserver able to directly take connections from WinMo devices? Based on the "Serverquelle hinzufügen..." menu item, perhaps the latter.
If so, do you use WiFi? WiFi is known to be a battery drainer and so is Bluetooth. If there is no solution, maybe you wanna give a docking station a try?
Hi,
yes, I am directly connecting to an exchange server in the web via UTMS / GSM - whatever is availabe. I am not using WiFi or Bluetooth for this. I think, this may be a general ActiveSync issue - it just keeps trying to communicate with the server, even with bad or no transmission. In that case the devices becomes hot, battery drains. Problem is gone with ActiveSync set to manual updates.
Regards
Hannes
For all I know, 3G is also a battery drainer especially in areas with weak signal. Did you try turning 3G off?
Thanks, I did not deactivate 3G, I usually get a straight "H" though, sometimes a "E" or "G", so I guess I have good UMTS reception most of the time and then sometimes Edge or GPRS. The thing is: no matter what reception, when I turn the scheduled syncing or push emails off in activesync, my battery lasts two days with occasional use. When I activate activesync, then the battery lasts one days when I am lucky, but gets killed within 30 minutes anytime during the day when activesync freaks. I think it is definitly an activesync issue. Nothing about "battery" and "activesync" in the MS knowledgebase, though.
I read about a similar issue here:
http://www.google.com/support/forum/p/Google%20Mobile/thread?tid=1f1677569a1fe0df&hl=en
But I have not only reinstalled my exchange account but also upgraded the Diomond ROM a couple of times with no luck.
Regards
Hannes
I looked for a hint in other forums, too, and this seems to be a general ActiveSync problem, not a Touch Diamond problem. In push / scheduled modes ActiveSync will continue to ping for a server while out of range.
Other devices exhibit the same behaviour. I don't understand why ActiveSync is not able to stop trying to connect when there is no or weak reception.
Hopefully WM 6.5 has this fixed? For me this is a solid reason to try out a WM 6.5 ROM.
Regards
Hannes
Hmmm, not sure this is the best place, but it is a problem with my TD2 and certainly any searches so far have yielded little in the way of result.
So we begin - I've had my TD2 since May '09 until last weekend it has been recieving outlook items perfectly via GPRS/3G and Wi-fi all through Activesync/Direct Push without any problems. In fact normally quicker than the same item appearing in Outlook on my laptop via the VPN.
Last weekend we changed broadband supplier and upgraded our router at Head Office. Since then updates through Activesync have been sporadic at best but are normally non-existent. This is despite installing the new self-generated certificate for the new VPN/OWA IP number.
When plugged into my laptop and passing through to the Exchange Server via desktop Activesync the items will update on the phone. Unplug from the laptop and use GPRS and it takes an age to synhcronise before finally saying "Waiting for Network" and not actually downloading anything. Equally using the Wi-Fi at home gets similar results, though this is sometimes mixed up with a Server Temporarily unavailable actual error message rather than the meaningless "Waiting for Network".
Our IT support contractor is flummoxed (they got one of their iPhones to access my account and it worked perfectly and timeously). I have even done a hard reset of the TD2 and rebuilt the settings from scratch and we're still back to the same place.
I can only assume that it is something server side that is upsetting the process, but don't know what. Really annoying as it has all worked perfectly for 11 months and has now stopped working without me actually changing the device settings in any way whatsoever.
I went with a WM over an iPhone to get best MS integration, so why should this wobble give my phone problems when an iPhone can work away just fine?
So, any ideas from the great XDA font of knowledge of all things WM?
Many thanks,
Niall
Turns out the new router that was part of the broadband upgrade didn't have Port Routing configured correctly. One tick of a box and all is sorted for OTA syncing.
Still not working over Wi-Fi at home though so some work still needed somewhere.
Niall
If only it was that easy. Still get the Waiting for Network error.
I even did a hard reset, again, and got the "Waiting for Network" error on the first sync.
Only way to solve it seems to be to turn off SSL, but even that falls down after a while stating that:
Exchange Activsync has encountered an error. If this condition persists, please contact you Exchange Administrator.
Support Code 0x80830002
If I then desktop sync the device to Activsync on the laptop via USB (which passes through to our server Exchange anyway) it seems to "reset" the sync and OTA syncing will work again - for a time, normally failing sometime between 5 and 7am in the morning when I check Activsync on the TD2.
Our IT support contractor has washed their hands of it saying it must be the phone because they've had it working fine for several days on an iPhone and old WM6.1 HTC device syncing with SSL to my account. Having not changed anything on the device I don't understand what is wrong with it to behave so differently. Given that the phone is only 12 months old this a real downer.
Prior to the hard reset I was having intermittent filesys.exe crashing errors but these have gone now. Could it be related?
Flummoxed.
Niall
The IT bods have lent me the WM6.1 device (a Touch HD - man I love Sense 2.5 over Touchflo 3D.....). I have swapped SIMs so my TD2 is temporarily on Vodafone whilst the Touch HD has my T-Mobile SIM in it - both are currently syncing. Will see which one stops working first - so for those who are interested, watch this space!
Niall
For those that are interested here's where we are.
Niall M said:
Still not working over Wi-Fi at home though so some work still needed somewhere.
Click to expand...
Click to collapse
Got a new router a while back. Opened Port 80 and 443, all sorted. Obviously when the TD2 was working in the past I just wasn't noticing that Activsync wasn't working over WiFi, which is understandable given that Wi-Fi at home is normally for a bit of Facebooking and Casual Web Browsing and wherever the phone had the tiniest bit of T-Mobile signal it would still get push e-mail.
Niall M said:
The IT bods have lent me the WM6.1 device (a Touch HD - man I love Sense 2.5 over Touchflo 3D.....). I have swapped SIMs so my TD2 is temporarily on Vodafone whilst the Touch HD has my T-Mobile SIM in it - both are currently syncing. Will see which one stops working first - so for those who are interested, watch this space!
Click to expand...
Click to collapse
This appears to be a carrier problem. After working flawlessy OTA with SSL for 5 days (Wednesday to Monday) the Touch HD finally stopped at "Waiting for Network" whilst my TD2 with SSL carried on fine on Vodafone.
After a rather tiresome call to T-Mobile to try and explain the problem and have them tell me they've downloaded the manual for the TD2 and can I check the Activsync settings, settings, etc, I got put on hold for a while before they came back and said they've enabled Mobile E-mail on my account. They had no explanation as to why this had been disabled.
So the TD2 is back on T-Mobile with SSL. As of yesterday there was no improvement in that it would still fail. However I do appreciate that it can take a while for settings to take effect and so far "touch wood" today all is working as it should following a "Wi-fi reset" yesterday afternoon. Will probably update the thread further to confirm all is well or moan!
So in my case this was a carrier issue that caused the intermittent functioning of Activesync OTA. Changing to a different connection type e.g. Wi-Fi or Pass through via Desktop Activsync on USB would allow a successful sync and reset the OTA syncing (I guess it cleared the previous "dead/jammed/FUBAR'd" OTA Activesync connection) for a limited period of time. I am surprised that having Push E-mail blocked by the carrier allowed for intermittent functionality rather than a YES/NO it either works or it doesn't result!?!
So the lesson here is that the ability to receive Push E-mail may be a slightly different function from your Phone provider which can fail despite your data connection appearing to work fine (Web Browsing OTA on the TD2 was consistent throughout). I just hope this saves someone 4 weeks of phonecalls and hassle!
Niall
On one laptop I have Office2003 which refuses to sync with my Topaz, just sit there constantly trying to synch. PDA connects to laptop, is visable to edit the storage.
Another laptop has Office2010, this sync perfectly but will not allow checkboxes to be checked for contact, calender etc, only allows Mobile Favourites and OneNote...
Going to try a 3rd laptop [friends] that has Office2007 to see if that will fully sync...
T-Mobile phone monkey lied - Didn't make any difference.
The good news is that the problem is sorted. I've been reliably receiving push-email via Activsync OTA since last Thursday (5 days now).
Again it seems to have been a new router problem server side as we were also starting to experience VPN problems at work. The IT contractors contacted Draytek who told them that in one other instance (also on an LLU line) reducing the MTU value on the router solved the problem. Since doing this (maybe unconnected, the IT bods won't be drawn on it) the connection seems to work again. I've done some googling on MTU and the basic premise of reducing the value seems to make sense to me, smaller packets are harder to drop.
http://www.kitz.co.uk/adsl/MTU.htm
Any super techs that actually understand this stuff like to comment?
I can only hope this record of woes shorterns the inconvenience for others in the future!
Thanks,
Niall