Hello - And could you possibly help (Syncing mature newbie) - PDA2, XDA IIi, 2020i General

Hello,
I have been given (kindly) due to a dying SE750i a xdaII
I have set up the docking station and downloaded Activesync from Microsoft however when I plug in my xdaII into the dock the sync window appears with the little window informing me it is retrieving my settings with a spinning green graphic.
It has been doing this for 20 minutes now. Initially I thought it had crashed so I removed the phone and got the message telling me it cannot sync as the phone is off, so I placed the phone on again and it started to sync again.
It is charging fine,
The Activesync I downloaded is Version 4.5 from
http://www.microsoft.com/windowsmob...ulas/eula_activesync45_1033.mspx?ProductID=76
The xdaII software seems to be ROM version
3.50b.40CS (ROM date 01/13/07)
Can anyone help me get it to connect so I can start to make the phone mine.

Managed to Sync however still think my firmware is out of date, any clues on that?
Also noticed my connection settings for MMS and also mobile web seem to be not there.
Currently using O2 can anyone help on this?
Thank you

Two things:
You have posted you have a XDA II, but this is the forum for the XDA IIi, small difference in name but big difference in what it will do. The IIi, aka Alpine, has WiFi and is stuck on WM2003, the XDA II, aka Himalaya, doesn't and isn't.
If you search on this forum elsewhere you should find a CAB file with the settings for O2, they may even be on the O2 site itself.

Related

Bugs In O2 Rom 'Upgrade' v1.31.139

Hi
I have been playing with this for a day now, and it has introduced more bugs in the wifi functionality. If you want to use WiFi from your IIs then I would avoid this 'update' like the plauge.
What you get:
- ROM: 1.31.00 WWE (13th Dec 04) so this is 2.5 months old
- Radio 1.06.00 (1.06.02 is latest)
- ExtRom: 1.31.139 WWE (no real updates to existing progs)
Whats Better
---------------
- The camera performs better in low light conditions (I used to get vertical lines on the screen
- Bluetooth stack build 3500. A vast improvement, but the latest is now build 3900 which some say solves the 'scratching noise' that is heard in some headsets
Whats Worse/Not Fixed
---------------------------
- O2 Active V3.5. Its bloody awful - spends its life redrawing the screen, its very sluggish, and adds nothing to the today screen. I never used to use the old version, but having the O2 icon was handy for its ability to list the active connections and terminate them. Much is made of the ability to change the position of the icon (which I never found to be a problem in the first place. Tapping the new icon starts O2 Active rather than listing the active connections. To list active connections, you need to tap and hold for 5 seconds. I find that after tapping and holding, I get the menu, but that the menu then fails to respond to my 'close connection' taps. I reverted back to the old O2 active program.
- WiFi. They have completely buggered it up. It was unreliable at best beforehand. I have a network at home, which I finally pursuaded the device to connect to after multiple resets. I headed into work this morning (2 AP's) switched it on, and it just sat there searching for the network. I went into Tools-->Network cards, and see the work network listed as 'connected' (it was not connected, I had not given it the PSK yet). I soft reset the device, and it finally saw the network and prompted with the usual 'Internet/Work' dialogue. I was then asked for the pass key. At this point I noticed that there is no longer a possibility to activate the soft keyboard in order to enter the pass key (A right pain in the arse when the passkey is just a random multicase/numeric key, and all you get are ** on the dialogue). Anyway, I entered the key, and the device refused to get a valid IP address. Doing IPconfig showed that the wireless card was trying to use an old GPRS IP!!! I tried a renew (3rd party ipconfig tool). I tried stopping and starting wifi. Eventually, I soft reset (still the same), so I stopped wifi, soft reset, started wifi - and *finally* it decided to go and get itsself an IP address. (this is a bug I saw in the old firmware, but its worse than it used to be).
- WiFi still marks the wrong networks as 'available', i.e at work, 10 miles from home, my home network is marked as 'available' and my work network is marked as 'unavailable' !!! (this is an old bug)
- In Network adapters, the dialogue, 'My Work Network Connects To:' is blank, and there is no longer a possibility to select work/internet (options are blank). This is new to v1.31.139 (anyone else also missing this)
- If you select a wifi connection and change it from being a 'work' connection to an 'internet' connection then the change does not stick. This is new to v1.31.139
- In the MMS applet, it is no longer possible to select a 'modem' directly. I used to be able to select 'O2 Active'. You now have to select a profile that includes an appropriate modem. This is new to v1.31.139
- When editing a network profile in 'network management' eg: My ISP. the device still forgets to display existing modem/vpn connections. (same as old version).
Out Of Date Software / missing software
-----------------------------------------------
- Photo Contacts (CallerId cab) is still version 1.17 (latest is 1.20)
- Missing O2 plus - other o2 devices include this
- Missing Intelipad
- Missing Smartdialer
- Old build of Java Midlet software
- Old build of MMS composer software
Other Thoughts
------------------
For my money, the device feels more sluggish than it did before. Though its difficult to prove this!
O2 has spent far too much time on that O2 Active rubbish - does *anyone* actually use this [email protected]?? - and not enough time integrating/testing the latest versions of CE, drivers, and third party apps.
I'll add more to this as I find new bugs, and send it all off to O2 in a couple of weeks.
What I am now using
------------------------
I am now using v1.31.139 + Bluetooth build 3900 + PhotoContacts 1.20 + Java build 1004.
----------------------------
Additions: 1/3/05
- SMS notify no longer seems to work. Anyone else suffer from this? MMS notify works fine and SMS notify is switched on. Perhaps the notify event is missing, but I have no idea how to sort this.
- VPN over wireless lan is still not possible - it tries and fails to connect. VPN over GPRS still works OK.
Additions 02/03/05
- SMS Notify problem is *not* to do with the rom update. I removed the registry key: HKLM\software\microsoft\inbox\svc\outlook since I had no need for the outlook folder in inbox. Removing this also kills off SMS notify!! I backed up, hard reset, preventing the stuff in the extended rom from installing. Installed PHM regedit, exported the outlook key, restored my backup and imported the reg key!!
- Internet/Work settings missing from Wlan setup. After restoring the backup, these had returned. Pretty strange, perhaps they were linked to the same registry key. No additional software bar the contents of the extended rom had been installed. If anyone else gets this, I suggest back, hard reset, restore might fix it.
Regards
Nigel
I have the same version with the latest radio build and cannot got the device to connect to my home Wifi what so ever.
Not exactly much use. It detects the network but refuses to connect. Either it says its connected but does not get an IP or it continously prompts for the network key.
I have also upgraded and am finding that the device often freezes when I try and switch it off, this happens about once or twice a day needing a soft reset.
I dont use the active stuff (which I never use) and am dissapointed that the O2 icon now starts O2 active rather than list the state of connections and allow you to trun them off i.e GPRS.
I agree the device does seem to be slower, I think I will be going back to the original code base and applying the BT patches, anyone know where there is a CAB installer for 3900?
check the ftp server
ftp://ftp.xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
username xda
password xda
its the file that ends in 3900.
I installed 3900 over the recent O2 update (3500) and all went fine. Just do a soft reset before playing with bluetooth or it will moan about an expired stack.
Nigel
SMS Notify
Hi
Anyone else found that the SMS notify stops working once the latest O2 update is installed. MMS notify works, but SMS does not - its damned anoying!
UPDATE: Found the reason for this see end of original post
Nigel
Thanks for the comments on the update. I think I will stay with the original 1.12 ROM! Where can you get the other updates for the Camera and Java and Bluetooth etc? I'm currently running Bluetooth 3500.
Cheers
This is why you should sell you XDA IIs on ebay and buy a XDA IIi :lol:
Well that IS a concept! Thanks made me grin!
Hi since I installed the new Rom, my clock keep on freezing. The phone goes on standby > then it freeze. If I wake up the phone , it will still be frozen.
I have to click on start > Today in order to refresh it. :evil:
Any ideas ? It's still happening with no other today pluggin. :x
Would you recommend we dont bother upgrading the ROM atm then?
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Remove entire O2 software:
You mean everything in the extended rom or just o2 active?
Hard reset, and when the message pops up about installing blah in 3 seconds (after you have done the touchscreen config) then soft reset. This gets you a plain vanilla HTC Blue Angel before the operator has installed its sh1te on it.
You can then selectively install just the bits you want, download the extended rom from the ftp site here, or unlock yr extended rom, copy out the cabs to main memory/SD etc, and then tap just the ones you want to install them.
If you just want rid of o2 active, then hard reset, and wait until the corporate/personal? message appears and then soft reset. O2 active is the last thing to be installed.
Nigel
mhanbury:
Hunt them down on the FTP site. Compare the version/build numbers with those in the new O2 extended rom.
Nigel
eskimofisherman said:
I upgraded also - the process was simple and took around 10 mins. This made my Bluetooth much more reliable and over a greater distance. I also find the 2s locks up frequently and requires soft resets.
Does anybody know how to remove the entire o2 software - I dont know anybody that uses it and Im sure it would speed up the whole device.
Click to expand...
Click to collapse
Hard-reset your xda.
When the Personal/Corporate screen comes up, select corporate and enter 0506 - zero five zero six
This won't install active.
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
If you buy a new XDAIIs in the UK now you will get it with :
ROM Version: 1.31.00 WWE
ROM date: 12/13/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtROM Version: 1.31.139 WWE
Ive had mine for 2 days now and ive had to soft reset about 6 times! and Hard reset once!
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
irelmo said:
jeux_1 said:
I'm getting a new XDAIIs (my 3rd one) , I will stay away from the new update and just put the bluetooth/ radio and contact manager manually.
That new update is just a piece of [email protected] :evil:
Click to expand...
Click to collapse
and this is annoying the hell out of me! can anyone tell me what im doing wrong. Why is it that whenever I do a hard reset I have to change the name of my activesync folder? If I try to keep them the same, it says I cant because there is already a device with that name!?!? :twisted: Or am I just being a noob?
Click to expand...
Click to collapse
This is really wierd. My IIs works fine - doesn't lock up, doesn't need hard resets or anything so drastic. I don't have any other apps on the device though, just the standard one's O2 supplies (GPRS Monitor etc).
What other apps are people running? I'm guessing Today screen plugins are causing grief (Pocket+ etc)
yeah I did tried my phone with no today plug in but it is still crap, was working just fine with the previous rom......... what have I done :x
At least it keeps me busy....
The problem is you should have bought a XDA IIi not a XDA IIs.
Mike

xda mini s and carkit

Hi,
I'm going to buy an xda mini s after seeing my mates, but it would not work with my vauxhall factory-fit carkit, not only did it not share the phonebook over bluetooth like my Nokia 6280 but it also kept disconnecting after about 20 seconds even if you weren't making a call.
From reading this forum i've gathered that the AKU that is out for Windows Mobile 5 will sort the phonebook sharing and possibly sort out the connection issue as well but what I haven't gathered is which rom's do what. I'm not going to ask which rom is best as I can see it's not as simple as that, but if someone could suggest a few roms that might be suitable for an uk o2 sim card and will have the aku. I'm not fussed about it having extra software in, i only want it to work with my carkit and do push mail with exchange 2003 sp2.
Any help you can give me would be appreciated, I have made the effort to read the forums, but I'm a little overwhelmed by the amount of information !!
Cheers
Andy
hi, ive got a bluetooth car kit and dont have no probs, mine doesnt have the capability to share the phone book but i havent had any connection issues. ive flashed the Mr.Clean ROM to my T-mobile UK MDA and seems to be good. it has push e-mail and AKU2. been using it for a few weeks and seems fine. hope this helps a little.

Blackberry Connect (2 or 4) and WM6

i thought to ope a new thread about this.
i tried to get bb connect on wm6 (at&t) versions 2 and 4.
i didn't get any of them to work.
did sombody succeeded in the meantime?
is there a new version coming up?
hope te hear...
Tried them both too on my 750C w/ WM6, unsuccessful. Right now I am on BBC 4.0.0.90, still not working, getting from: No Connection -> Network Available -> Data Tunnel Available (at this point gets an IP address) -> No connection. The PIN is never generated so BBC is unusable for now. I was following a thread, http://forum.xda-developers.com/showthread.php?t=294218 , tried to modify my AKU version (didn't try to modify the build in the ROM though) w/ no results.
In the mean while, Hermes/ATT 8525 w/ WM6 and BBC 4.0.0.90 works just fine. What are we missing here ? Anyone w/ a clue ?
I am happy that someone opened a thread for this, I hope we'll get a fix.
Thanks,
HC
i've upgraded mine with wm6 non attws , unable to connect on bbc4 as well
does anybody know the latest b uild of the bb connect software (and where to get it)
i have (downloaded from vodafone nl)
blackberry version 4.0.0.67
transport version 4.0.0.70
and does anybody has a list of new features in later releases
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
i'm on 750v wm6.0 vodafone and can't get bbc4 to work
not even 2.1
argh!
pissing me off!
I recommend you just to wait a couple of days with the device switched off. I have a HTC Touch, vodafone, Germany. Downloaded Blackberry 2.1 and 4.0, didn't work. Never got a PIN ("PIN pending"). Read somewhere that it worked after a couple of days, so I switched my device off and was frustrated. I even wanted to sell it on eBay already. After 2 days I switched it on again, and, guess what, I had a PIN in the Blackberry software!!! Then I configured my Touch using BlackBerry Activesync Software, and it's now working!!!!!!!!!!!!!!!!!!!!!!!!! Version 4.0!!!!!!!!!!!!!!!!!!
So my recommendation: Try to wait 48 hours.
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
georgedorn said:
Currently no BB client is working with WM6 Treo, no matter if you use 2.1.2.52 or 4.0.0.67 or 4.0.0.90. Its always the same, as soon as you connect to the BlackBerry infrastructure you are blocked >>> no IP-adress >>> no connection. Sometimes you can connect one time and when you send the PIN via register now you lose the connection and never get it back again. RIM blocks all device/client/provider combinations which are not supported by the providers. So if you have a provider who supports BlackBerry on WM6 Treo you should be able to connect. I have not found a provider who is doing that so far. The same is with HTC S710. This device worked fine with BB connect 4.0.0.67 for some time, but now you are blocked by RIM if your provider does not support BB on the device.
Click to expand...
Click to collapse
Wrong. I have been using BBC 4 on my Hermes for months with AT&T and as far as I know the Hermes is supposed to be a "blocked" device. It's not that RIM is blocking it, it's that the software has to be HEX edited to work with WM6. No version of BBC will work on WM6 on the Treo until someone smarter than me can cook up a ROM that is HEX edited to run BBC.
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
BBConnect for WM6
gnyf said:
Anyone succeeded in gettings this to work - I'm about to flash to Wm6 so better be sure...
Click to expand...
Click to collapse
I just got this and it works perfectly on my S710. I had got wipe the device and do a fresh install of the application. Give it a shot. Make sure you have an Active Sync connection to your device before trying to install.
http://sems.org/content/download/bbc4/bbconnect_wm6_standard_bb_4.0.0.84.zip
On the AT&T Rom you get Uncertified System Software detected on the install. I assume this is because the S710 is a smartphone rather than a WM device?
Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC
PS. Posted this in the "Palm Treo 750" forum too ... hope I don't bother anyone
hchickers said:
I have 4.0.0.90, check the thread that I posted above for links to download it. Also Google for "Blackberry Connect 4.0.0.90" and I am sure you'll get something. I think the 4.0.0.90 version is not specifically for Treo 750, it's rather for larger screen devices, like the Hermes etc. but it doesn't bother me scrolling a little bit in one or two tabs.
Good luck,
HC
Click to expand...
Click to collapse
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
hb88xx said:
Does it just work or did you modify any strings in the ROM? which rom by the way?
download here: http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
Click to expand...
Click to collapse
Still doesn't work. I tried to install/uninstall etc. w/ same results, no connection. I am using the leaked ATT rom which otherwise works fine, no strings mods, just the rom w/o any modifications.
Hope this answers your question.
Good luck,
HC
BB Connect from HTC
Anyone have tried this ?
[email protected] said:
Anyone have tried this ?
Click to expand...
Click to collapse
Just did it, same result, no connection. I am uninstalling it right now. Too bad. Again, I think it has to do w/ the device type not the software itself. I have a 750C w/ leaked ATT rom
Anyone w/ other results ?
Thanks,
HC
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
mils said:
Installs fine. Gives me PIN and IMEI but no IP and no connection. IT says Network Available and tries to reconnect every few mins. I'll wait for few hours before unistalling it. Sometimes Blackberry Service can take little bit longer to register on USA T-mobile provider.
Click to expand...
Click to collapse
What kind of device ? 750C or 750V etc.
Thanks,
HC
750V with Vodafone WM6.
Now it flashes with an IP for about a second.

ActiveSync Push E-Mail goes to sleep?

This may be a simple one, but Im stumped...
My Tilt connects to my exchange 2007 server. On other phones running WM6, ActiveSync stays online 24/7. On my Tilt, it goes dormant after a while. I added an exclusive in task manager...
Basically when I grab it after its been idle for a few hours and look, ActiveSync says it was last synchronized at whatever time, I manually sync it, and it pulls down everything and stays online for a while, but eventually it goes dormant again...
Im sure that it's a simple fix, but I can't for the life of me, figure it out....
I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.
Kaiser connection issues
There are some issues going on with the way the Kaiser pulls emails after it goes to sleep.
Check the thread below or look through this forum for similar topics.
http://forum.xda-developers.com/showthread.php?t=332362&page=4
One of the problems that I've found on this issue is the ActiveSync notifications becoming corrupted. I'm not sure how to go about fixing this, but I downloaded a program called MemMaid that was able to rebuild the ActiveSync notification queue. After I rebuilt the notification queue for ActiveSync my Windows Vista Home Premium and XP Pro systems saw my Tilt and were able to sync again.

Strange Repllog.exe error. Please help!!

Hi members,
I'm really stuck with a strange problem. I can't sync remotely with my mail server using ActiveSync.
I mean, the device syncs perfectly with my home PC, but when I program it to sync with my ISP's Exchange server it doesn't work.
The process stops and the device gives a "Repllog.exe error".
This problem started since I upgraded my HTC TyTn II to WM 6.1.
Any thoughts?
I'd be very much obliged for any thoughts that you might have on this subject...
Regards,
Ricardo
RickFerreira said:
Hi members,
I'm really stuck with a strange problem. I can't sync remotely with my mail server using ActiveSync.
I mean, the device syncs perfectly with my home PC, but when I program it to sync with my ISP's Exchange server it doesn't work.
The process stops and the device gives a "Repllog.exe error".
This problem started since I upgraded my HTC TyTn II to WM 6.1.
Any thoughts?
I'd be very much obliged for any thoughts that you might have on this subject...
Regards,
Ricardo
Click to expand...
Click to collapse
I think there is a bug in repllog.exe on WM 6.1 - it crashes overnight, every night, on my Touch Diamond2.
Cheers, Rob.
Same here, every night, on a Touch Diamond (2.03 ROM.)
Doesn't seem to do any damage or freeze the phone, just plain annoying.
Hunter_I said:
Same here, every night, on a Touch Diamond (2.03 ROM.)
Doesn't seem to do any damage or freeze the phone, just plain annoying.
Click to expand...
Click to collapse
It is improved in WM6.5 but still not 100% perfect. Also there's a bug in the schedule feature. I've just been to Egypt on holiday and most definately changed my ActiveSync to "Manual" for both peak time and off-peak as I didn't a) want to run up £7.50/MB roaming or b) be bother by work emails.
But my work emails sychronised somehow when I landed back in the UK. I'm hoping this was when it returned to UK 3G (please!!) but it shouldn't have done it as it's still set to manual and I definately didn't click sync. Phone was off in the overhead lockers.
Cheers, Rob.

Categories

Resources