Database Develop

Please Help!!!! Tilt Dead!!!!

Hello guys. I have been searching the forum for over an hour to figure out a way to get my Tilt back up and running to the way it was before. I had almost every updated cab thats out there on my tilt along with the TomTom 6 software which is where the prtoblem occured. Once I installed a cab file called "MN6-update" to my memory card it soft resetted itslef and now all I get is a blank screen. This file was supposed to help redirect the maps that I downloaded for tt6 so the program will be able to read it. After installing this file all my phone does now is load up the AT&T startup animation and then it blanks itself out.
I downloaded mtty 1.42 and am able to see the boot screen and it says usb when I connect it. What do I do next? Any help will be much appreciated.

Does anything on the screen show if you do a hard reset?

When I reset the device I only get the At&t welcome screen (along with the anoyying sound) then.... Death. The screen blanks out and none of the buttons respond.
Update: I just did another reset (By holding the power button for 30 seconds) and a message appeared telling me that a reset is not possible due to a program that was installed from an unrecognizable source. It said that it will automatically restore the phones factory settings and since then it has been stuck on the At&t screen for several minutes. Does this change anything?

The Factory Defaults loaded automatically
Looks like that second reset did the trick. Now all I have to do is load all those cabs again avoiding that last problematic one of course!

help, my kiaser will not boot

hi all, i have wm6.1 on my kiaser and i then installed htc today v2.1
however now i can not load in wm. i get past the splash screens, then i see the today screen loading, but not the plugin, then quickly it restart where it lock on the windows mobile 6.1 splash screen, i am stuck there, i cant access it through my PC i cant uninstall the app, im not sure how to reset the device.to turn it off i have to yank the battery out.
it is insured but i dont think i'll be able to take it back as it has been flashed.
please help.

fixed, all it took was soft keys and reset button on base of phone which i didnt know was there.

Stuck at boot screen

I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you

I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.

Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!

tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.

still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!

1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.

Kaiser turning off autolatically in 10s

hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot

Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.

Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks

Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!

maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck

i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks

Can't boot my phone

Hi everyone, i've just bought a Xperia X1 but i can't boot it..
Sometimes it reboots at the windows 6.1 screen, sometimes it stays on for a bit longer and starts rebooting when i have to tap the screen to allign it.
Every time the phone just starts over and over again with the SE logo, after that windows mobile screen for about 2 seconds and then again..
And the computer can't recognize the device yet because there's no time to install the drivers for it.
I did hard reset but while i'm doing the reset the phone just starts over again..
Anyone that knows what to do with this? Or should i just try to return it ( i have no more warranty paper or something ). Does SE warranty work with IMEI number?
Thanks a lot!

Sonina said:
Hi everyone, i've just bought a Xperia X1 but i can't boot it..
Sometimes it reboots at the windows 6.1 screen, sometimes it stays on for a bit longer and starts rebooting when i have to tap the screen to allign it.
Every time the phone just starts over and over again with the SE logo, after that windows mobile screen for about 2 seconds and then again..
And the computer can't recognize the device yet because there's no time to install the drivers for it.
I did hard reset but while i'm doing the reset the phone just starts over again..
Anyone that knows what to do with this? Or should i just try to return it ( i have no more warranty paper or something ). Does SE warranty work with IMEI number?
Thanks a lot!
Click to expand...
Click to collapse
reflash it by your sd card

Have you tried to update it via SEUS?