I tried to upgrade my VPA III to WM5 (logout version), it successfully, but only run a time, that time, speed is very fast, i tested call, media, bluetooth, all is ok! after screen off, i cannot enter my PDA. I tried soft reset, but only enter boot screen with some display:
R 1.2000
G 1334.3
D 5.3.4.HN.WWE
and seems freeze at this screen. I cannot enter my PDA.
anybody have any idea for me!
Thanks,
best regards
Now, I cannot hard reset too. I tried hard reset, but, screen still off too. (
Try to hardreset, don't forget SetOperator
Hi logout!
Help me plz.
Ban la nguoi viet a?
the noi tieng viet nhe. Con VPA III cua tui, da upgrade ban WM5 cua bac thanh cong va chay ngon oo lan dau tien.
Bi h thi ko hard reset dc nua
Toi thu hard reset. press power + soft reset + record. nhung screen van den thui. Lam sao day. huhu
Sorry, that my comment is not concerning your problem.
s60_O2XDAIIs said:
I tried soft reset, but only enter boot screen with some display:
R 1.2000
G 1334.3
D 5.3.4.HN.WWE
Click to expand...
Click to collapse
Do you really have a R 1.2000 ?!
@Community: Does a Radio 1.20 exist and nobody knows about it?!
I'm a little bit confused :wink:
hehe! maybe not R 1.2000!
I only remember like as that. because, now, my VPA III doesn't display screen.
try to hard reset, format registry&media..
Thanks, I 'll try and hope successfully.
However, now, screen is off, cannot turn on my PDA. screen always off after try soft reset 3-times. Hope that battery is empty.
I found a reason! My battery is failed! After change battery, my PDA actived, I tried WM5_Ivan_V3 but after hard reset, and first steps to setup screen and date/time, I cannot use my stylus, all tap at screen is no action while keyboard still ok! huhu. Help me
Related
Hi,
Thanks to the very clever people over at www.imei-check.co.uk I now have an unlocked T-Mobile Vario.
http://www.imei-check.co.uk/m3000unlock.php
I now wish to know if I can flash my unlocked Wizard with an Imate K-Jam2 flash?
I know there is another post on flashing the the Qtek 9100 with the K-Jam but I dont know if the T-Mobile Vario will pose any different issues or problems.
What I want to know is :-
1) Can it be done, can I flash my T-Mobile Vario with a K-Jam2 ROM?
2) How do I make a backup of my T-Mobile ROM before taking the plunge?
I am a Sony Ericsson P900 convert so please be gentle with me on your responses. I'm no expert but have got this far (Unlocked) by reading these and other forums.
If any of you can help out I would be most gratefull.
Cheers
Lee
I have (had) a Vario from T-Mobile Netherlands. I unlocked like you and ran the ROM upgrade utility for Qtek 9100, available for download on :-
http://www.beyondthetech.com/blogs/kjam/
It works fine. My Dutch phone now talks to me in English.... phew!
@belgilux
What are the advanges of the qtek rom over the vario ??
Niets dat ik kan bespeuren. Enkel is ding dat zijn in WWE - wereld Wijde Engels - dit is good voor mij aangezien mijn Nederlands niet zo goed is. ..
ok thanks ,
mijn nederlands is goed , dus hou hem liever in nederlands
grtx, arnold
Hey, guys, I have the same problem - I want to change the OS from a german to en english one. My device is the XDA Mini S from O2 Germany. Do I *really* need to pay for unlocking first or I can just flash it?
P.S. How did you back up the ROM before the flashing?
hello ingenious ,
as far as i know , you have to unlock it first otherwise you can't acces the bootloader.
buckup of your old rom can be done (only after unlocking).
you need the program romupdate.exe
disable activesync on usb connection
turn off phone
connect usb cable while pressing camera button
start romupdate
chooice usb connection
enter 'r2sd all' this coppies your phone rom to your sd card (sd card will be erased !!!!!)
next step is to dump the sd card to file to store.
you need ntrw.exe and sd card reader
in a dos box in a dir with ntrw enter 'ntrw read dump.nb1 drive_letter_of_reader:'
that will dump you entire sd card to file.
to restore , but it back with ntrw write .......
reset phone while holding voice an camera button and chooise restore from sd card.
good luck , arnold
p.s. i'm wrinting this out of my memory so forgive me if i have something wrong.
Hey, thanks very much
Just a thing bothers me still... If I unlock the phone (i.e. replace the boot loader) won't I just lose my warranty from O2?
mhh that doesn't worry me to much,
officiali it will only void your warrnaty if they can proof that that is the problem.
if not they can not hold it against you (in holland that is) , but you may have to 'fight' for your warranty.
grtx , arnold
run the ROM upgrade utility for Qtek 9100
hi guys,
i wanna ask a questions about run the ROM upgrade from utility for Qtek 9100.
my pda-phone is mda vario, is it possible if i did it without unlock my phone?
because i tried run the ROM upgrade utility for Qtek 9100, but it said that there is an error with my phone while in process. but in that case, i haven't unlocked my phone.
anyone can help me, please
thank u...
reset phone while holding voice an comm.manger button and chooise restore from sd card.
Click to expand...
Click to collapse
but he boot NOT from the sd card ... where is the trick ?
regards
I have successfully replaced the ROM on my MDA Vario with a K-Jam ROM and now I want to go back to the original ROM. Following the instructions by arnoldl earlier in this thread I created a backup dump.nb1 file and used ntrw_189.exe in a CMD window to dump this to a file. This took bloomin' ages since I have a 1GB card - very tiresome!
Anyway, I have now reversed that process to copy the dump file back to the mini-SD card but when I hard reset my Vario I do not get a prompt to restore from the SD card. I only have options to restore to original settings or cancel.
I have allowed a hard reset to complete and the mini-SD card does not even register in the Vario. Removing and reinserting does nothing. I've tried a hard reset twice and still no joy.
Assuming I have successfully created a working ROM image on my mini-SD card are there any other tips or options for restoring it to the Vario ROM?
anyone knows the keys to press for restore an image from sd card ?
I have tried all combinatiosn of keys, but nothing are working
regards
sorry , it is hold camera and voice comm button while resetting.
previes state must be on!!
grtx arnold
Thanks for that. I just realised it says hold camera and voice comm rather than comms and voice comm, like you would normally do for a hard reset.
I've tried a boot with the correct buttons and could see nothing at all on the screen. I now realise there is something but without a backlight it is nigh on impossible to see. Anyway, I spotted that too late and started button mashing to try to get the thing to spring into life. It is now staring at me with a big clear white (lit) screen that dims briefly periodically. I now have no idea what is going on and whether this is the correct behaviour or not.
How long should the reflash take? Will having a 1GB card mean it takes 8 times as long as a 128MB card as it has to read the whole thing? How do I know if this is working OK?There are no progress bars or anything - just a plain white screen.
i did say comm and voice , but i just changed that
reflash was prety fast when i did it , within a minute i thought (256mb)
Oh dear :-( Mine's been blinking at me for 15 minutes now.
I just restarted the process and I managed to see a "Format BinFS Success" message and a progress bar at the bottom which I think said "Upload OS" or something like that - too difficult to read properly in today's miserable grey daylight. But I'm now staring at the plain white screen once more.
Maybe my ROM image is fried. Any ideas how to get hold of a clean T-Mobile UK MDA Vario ROM file?
EDIT : Further info......
Bored of the blank white screen I pressed the reset button on its own. The device reset and this time with the benefit of the backlight being on I could see the Format BinFS success message, a couple of checksum checks and something about downloading ROM and extended ROM. This all took only a minute or two, which seems positive. But then I saw a message about formatting FAT (or FAT32?) and while that was being displayed the screen faded/disolved to plain white and has resumed its periodic dimming.
Unfortunately I now have HTC Innovation and imate branding all over the thing so I can't just pop it back to T-Mobile to fix it. I wish they had a full ROM upgrade/replace image in a .exe, like qtek and imate.
hello,
what means "previes state must be on!! "
i have an 512 mb card and no chance to boot the sd. Has anyone
try the qtek german bin on the xda ftp server here ? i write this
image via ntrw on my 512 mb card, press the camera and voice button and also reset, but the sd card want recognize ...
help! I want this german qtek rom on my wizard.
regards
greddy said:
hello,
what means "previes state must be on!! "
Click to expand...
Click to collapse
i only got in this mode when resetting with the buttons pressed when phone was on.
when i first shut it down and then reset it didn't work.
grtx
Having left the white screen for a couple of hours there is no sign of anything useful happening. I reset the device and now I am dumped directly to the bootloader screen - there seems to be no software on the device now.
So it appears I can only get this thing up and running again with the k-jam ROM (or presumably Qtek) by running the .exe ROM upgrade file. But for me my option to go back to native Vario software seems to have vanished forever. Maybe I'm just really unlucky but this might serve as a warning/caution for others who want to flash their Vario.
I INSTALLED WM2005 IN MY PDA2K ...... it was running ok but suddenly a problem happend ...anyway it tried to reinstall wm2005 again and here is the problem>>>>>> while making the last step (hard reset then (record+camera) buttons) and change the values of the 2nd and 3 rd choices to (yes) instade of(no) the window stuck then to this status and neveropen again .... the last screen is
boot
ehternet kitl
usb kitl
kitl status
active
passive
what can i do ,,,,,,,,,,,,,,,,,,,,, heeeelllllllllllllpppppppppppppppp
Moved to BA
you need to write in proper english before anyone can advise
Well that was a nice thing to say, ever thought that just may be the guys first language is not english?
@ kkktda
Its been a long time since I had WM5 on my device. It seems you are stuck in the format option and cant get out. Are you using the correct key (was it not mail, not sure but the wiki upgrade has the info).
Have you done a hard reset and tried again?
Hope it helps.
PS oh please, make my day, correct my spelling and grammer, wont help the guy that asked for help but would JUST thrill me.
my first lang....
thx
anyway r u gonna help or not
i done it all in a right way till the end of process.... when the striped screen appeard i use the mail button and the white screen appears containing the next as follow:
kitl options
ethernnet kitl
usb kitl
connection status:
active
passive
and nothing else
all i wanna know is it a soft ware or hard ware problem????
and if it is a software what is the solution... try to help me not to blame me for my english lang. okay
I remember pressing 'Mail' button, and you do get a white screen for a while. But it will eventually reboot itself.
Try to put a different ROM (AKU 2.6 instead of AKU3.2). If it works, switch back to AKU3.2 afterwards.
I tried both and they're almost identical.
did you click on the email button?
Straniero, qual'è il tuo problema esattamente?!?
Posso aiutarti in qualche modo?
Trad.
Straniero, what's matter?!?
May I help You?
> Ups, scusa. Avevo letto male il 3d.
> There was a mistake...
HELLO, MY P3600 (TRINITY) DOES NOT SET OFF PIU' OR BEST JAMS ON the SHIELDED one WHERE E' LOGO HTC AND DOES NOT MAKE ME There TO ENTER IN the SYSTEM.
I HAVE MADE 2000 SOFT RESET NOTHING,
REINSTALL 4 TIMES ROM AND E' ALWAYS the SAME PROBLEM
YOU HELP ME,
HELLO..
You really should learn a little more english or switch to an italian forum. And you shold STOP WRITING IN BIG LETTERS BECAUSE THIS NOT POLITE!
- when you turn the device on what do you see: No GSM?
- how far is it booting (splash screen/windows ce)
- when you start in 3 color screen what version numbers can you see?
Problem Start Htc Trinity
how far is it booting (splash screen/windows ce)
NO ENTER IN WINDOWS CE
HELP ME!!!!!!!!!!!!!!!
- when you turn the device on what do you see: No GSM?
Problem Start Htc Trinity
- when you turn the device on what do you see: No GSM?
NO GSM
NO WINDOWS CE
YES
If NO GSM you either can send it to HTC service they can reflash the radio ROM chip directly.
And next time observe caution.
The problem you describe sounds like YOU cancelled a ROM update in the middle (e.g. when it was looking stuck but in fact it wasn't you cancelled the update or you removed tha cable).
problem start htc trinity
how I make to resolve the problem?
tankyou
And i have this problem, when power on the pda i see No GSm, d v3.00 ....
From where comming my problem? i make hard rest but nothing... reflash with other room (6.0) and again nothing. But some time the pocket freezed.. and i don't know ... if i flshed the radio module will be OK. or maybe have some hardware problem, becouse haven't radio modula + freezed some time...
hi all
i upgrade my pocket pc imate pda2k se2003 to windows mobile 6 professional with (HELMI_BA_WM6_R0_Public Pass newdevicesuck) its working fine but after one day my pocket pc got error (wrong password) i enter correct password many times but it say worng password i soft rest my ppc after soft reset my ppc can't start. reset my ppc many time but problem is still i connect my ppc with desktop pc to syncronise (microsoft active sync) but dont detect my ppc . plz help me what can i do?
plzz
AddAn
There is a bug in WM6...when the main battery is drained or removed you cannot use your password. In this case there is no other option...you have to make Hard Reset!
thx for ur reply.i reset the PPC On/Off button + Reset button.but problem is still it requests passward.How to make Hard Reset and further help.plz reply
If this is true I'm sure you do not perform Hard Reset correctly. If this is new ROM you should go to Boot Loader first.
Tip:How to:
1.Perform Soft Reset
2.Push Record and Camera button at the same time and hold them until the Boot Loader screen shows up.
P.S. You should do step 2. before the Radio version/ROM version appear in the right bottom of the screen.
3.“Enable KITL” must be NO, “Clean Registry Hive” must be YES, “Format Storage” must be YES
P.S. Use the Record and Camera buttons for navigation.
4.Press Mail button.(Do not touch anything until the white screen disappears)
NOTE: IF YOU WANT TO GET RID OT THE PASSWORD(WITHOUT DELETING YOUR FILES) YOU SHOULD PERFORM NO/YES/NO PROCEDURE!
That's it! Good Luck!
thx.soft reset done.thx alot for ur suggestion.PPC working properly.if there is any other Bugs n other issues that r ristricted in this version plz send me detail.if u dnt mind.once again thx
my camera and recorder button works before booting and after that it does not move the option in the boot menu...............will some one please help me
i had got imate pda2k could u please tell the place form were i get steps to inatall wm6
welcome to the forum!
short question - short answer:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardMain
step by step instructions, don't skip anything, if there is something you don't understand, come back to this post and ask for it.
The touchscreen of my Tytn 2 OEm ROM R 1.27.15.32 G 22.51.88.13H and D 1.81.00.00 stopped working and i don't know what to do..i did a search on this forum but with not much joy...can the gurus help me so that my touchscreen starts responding....
thanks in advance..
tytn64 said:
The touchscreen of my Tytn 2 OEm ROM R 1.27.25.32 G 22.51.88.13H and D 1.81.00.00 stopped working and i don't know what to do..i did a search on this forum but with not much joy...can the gurus help me so that my touchscreen starts responding....
thanks in advance..
Click to expand...
Click to collapse
If a soft reset (stylus in the reset hole or just a power cycle) didn't fix it, do a hard reset.
i did hard reset and now the phone boots up uptp the "windows mobile" screen and stays there...what would be next option?
tytn64 said:
i did hard reset and now the phone boots up uptp the "windows mobile" screen and stays there...what would be next option?
Click to expand...
Click to collapse
Repeat the hard reset with the softkeys and stylus.
i tried to hard reset again but now i cant beacuse the left softkey is locked, and cannot be unlocked..howver the activesync is still working..is there any way to hardreset using the PC/.. i wont mind flashing the ROM fresh if there is a step by step procedure for that...
tytn64 said:
i tried to hard reset again but now i cant beacuse the left softkey is locked, and cannot be unlocked..howver the activesync is still working..is there any way to hardreset using the PC/.. i wont mind flashing the ROM fresh if there is a step by step procedure for that...
Click to expand...
Click to collapse
Hi, read this post. It worked for me. Don't forget to backup first so you can restore once your original rom is back on the device.
Problem solved..HTC is great....i did hard reset again and used sprite backup to restore...
the trick is to be very careful when pressing softkeys..they are so small that one can be pressing the red or green buttons..and stylus should be used for very short time (almost as if to touch and retrieve)..anyway all is well that ends well . Thanks gurus and this great site...long live HTC.