PLZ can anyone help me??
a very serious problem :x
every time i turn on my bluetooth on my xda IIs and after 15 seconds it turns off automaticly and gives me a warning window which says :
(( BTTrayCE Sorry ! Bluetooth can no longer be used because the license is expired .
BDA : 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8
i upgraded the rom but the same problem still appears
can u help me please
Which rom do you use ?
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1337.42
EXTROM VERSION : 1.31.139 WWE
there are some thngs that you may do, you may try hard resettng the device (power+reset), or you may try rom upgrade, there are newer roms available
i tried to upgrade to other roms
also i tried the hard reset many times
the same problem
it's a very strange problem
:roll:
you can download bluetooth stack only and install it you can find it in ftp
now i upgraded to rom :
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1.12.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.40.237 WWE
and still the same problem in bluetooth :?
Try tmobile NL 1.42 rom extrom 1.42.119 i am sure it works
i will make simple explaination for upgrade procedure so if you make a mistake we can figure it out more easy
1. download the rom from here
2. extract it using winrar to your computer
3. download MaUpgradeUt_noID from here
4. extract it to the same folder in which you extracted the rom
5. put your device into bootloader mode (pressing power+reset+record buttons at the same time until "Serial" shows on display)
6. put your device in the cradle
7. run MaUpgradeUt_noID.exe
8. after upgrade press reset to leave bootloader mode
that is all
please post if that was helpfull
Thanx for Help But i still have the same problem in bluetooth
now i have this ROM :
ROM VERSION : 1.42.00 WWE
ROM DATE : 09/05/05
RADIO VERSION : 1.13.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.42.119 WWE
Now i'm thinking if it is a hardware problem coz i made all the software solutions .. :?
any way TANXXXX 4 ur Help
Related
I'm sorry, I've searched and searched & been at BA_Begginers for the last 5 hours, where can I get latest more stable ROMS from? I've been advised to get the iMate 1.40 WWE ROM, but cant find it or links to it on this site, I've registerd at iMate but they have not sent an email so i cant download from there site any links?
or any ROM links for my XDA lls from UK o2 in 2004.
Currently Running :
PH20B 0 B
WWE E
O2___001
1.31.00 0 0
1.31.139
1.06.00 06.00
SHIPPED DEVICE INFO:
ROM VERSION: 1.31.00 WWE
ROM DATE: 13/12/04
RADIO VER: 106.00
Protocol VER: 1337.38
ExtROM V: 1.31.139 WWE -
I Need Links to PocketPC2003 or WindowsMobile2005 ROMS many thanks!
Hi.
Sorry but I simply don't believe You spent 5 hours at wiki and not clicked this:
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
to get an update.
In case, your device is not exactly i-mate pda2k (but another Blueangel) you'll need to replace baupgradeut.exe supplied with above archive with the one I give you (to bypass country/device id check)
Good luck
oops.. delete
thank you very much, i tryed a very similar link to imate firmware on the BA begginers page but it dosnt work at all, i spent most of the time trying to get registerd properly at imate only to be told to go away as i dont have a imate branded device. thanks again i'll give it a go.
In case, your device is not exactly i-mate pda2k (but another Blueangel) you'll need to replace baupgradeut.exe supplied with above archive with the one I give you (to bypass country/device id check)
Click to expand...
Click to collapse
i have downloaded the file you added to replace the the one in the imate rom, will replace then add it to XDA, where is the dummys guide to installing this particular ROM? i'll look again on the wiki page.
There should be some kind of 'step by step' in BA's wiki.
But in truth, the process is very simple.
Just download file from i-mate. Run it. (It will extract files to directory specified). Replace baupgradeut.exe with the one I gave you and run it (baupgradeut.exe).
On screen step by step displays and tells how to put device in bootloader mode and place in cradle etc.etc. simple
have fun
Hi There.
I have successfully upgraded the ROM and Radio using Pug's ROM.
Please can someone explain why after the successful upgrade I cannot pair the original O2 Bluetooth handsfree. XDAIIi detects the O2 BT, but after entering the passcode it keeps “waiting for the device” and errors out. The same behavior occurred before the upgrade. There is nothing wrong with the BT – it works fine with O2 mini. Also my XDAIIi works fine with other BTs ie Motorola.
I hoped that upgrading ROM and Radio would fix it. What else could be wrong?
Please help.
pc
ROM version: 1.11.00 WWE
ROM date : 01/27/05
Radio Version: 1.04.00
Protocol : 1337.42
ExtRom : 1.11.162 WWE
Hi,
i was using xda 2s, with WM5 (old-build) and several months ago, unaware followed this link:
http://forum.xda-developers.com/showthread.php?t=274505
somehow, i've managed downgrade to WM2003SE again,
using this link:
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
(ROM: 1.40.00 WWE
ROM date : 03/10/05
Radio: 1.12.00
Protocol ver: 1337.42
ExtRom: -blank-).
running this version the Bluetooth cannot run, 'license expire'.
Later, I want to try the new ROM (looking for the one with direct push-mail feature) of HELMI in this link:
http://wiki.xda-developers.com/index.php?pagename=Helmi.
When running BAupgrade, received error:
Error 100: Model ID Error 25-N-10-N-N
("the ROM image that you are trying to use is not designed to work with your divice. please check the vender web site and download the correct ROM update")
then tried to run with MaUpgrade, it seem work, but no upgrade at all.
Somebody pls help..
Thank you very much.
u need to use MaUpgrade_NoID instead. it should be on the wiki website somewhere.
also remove the SD card from the slot before doing the upgrading.
Unfortunetely, MaUpgrade_NoID did not work..no upgrade at all..
is it normal if 'Ext ROM : -(blank)-'?
from Start - Settings - System - Device Info
thank-u
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
However, i am stuck halfway. Here is my Devicetype.txt file description. Only managed to get the Devicetype as PH20B, Language ID = WWE. The rest of the info I can't really make out.
Also, when i use the file : xda2nbftool -t -x,
it gave a warning for ms_.nbf
The rest of the files such as nk.nba and radio.nbf were ignored. See pic.
How do i get the rest of the hex addresses for the radio and nk files ?
Could someone help to generate the final nbf files for me or help advise ?
The Official ROM file versions are here :
English ROM
ROM: 1.40.00 WWE
Date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.923 WWE
MMS: 2.0.0.21
BT: 1.0.0 Build 3900
Can anyone help ?
More information on my existing XDA2s firmware :
ROM Version : 5.04.09.WWE
ROM Date : 11/02/06
Radio Version : 1.15.00
Protocol Version : 1337.45
ExtROM Version : (Left Blank)
Never really heard of ROM Version 5.04.09.WWE. And SDIO Card is not detected. Would like to downgrade to the official ROM as i suspect that the SDIO Drivers are not installed in the existing ROM.
Also, i tried using XDAtools\OSimagetool to copy another XDA2s firmware to this XDA2s. But it failed to write generating an error in the pic. Status of Activesync is connected.
mtnbikefreak said:
Hi recently aquired an XDA2s from a friend. However, the firmware has been modified. Would like to restore it back to the original firmware as the SDIO card is not functional. Used the Official ROM, but gave a Country ID error with my device and refused to upgrade.
Have done some homework read the instructions as shown on this link.
http://forum.xda-developers.com/showthread.php?t=228852.
Click to expand...
Click to collapse
I'm afraid you have read the wrong homework. Those directions are for the Himalaya & Andes, not the angel.
What OS is on the phone now? That will help point to the correct directions needed to reflash the phone.
Flashing to 2003 from WM5 or 6 will vary depending on if the extended ROM has been resized, etc.
Check the angel getting started in the wiki (It's working now)
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
Oh ... thanks for pointing that out. To answer more questions :
It's running on a generic Windows mobile 5.0. I have a feeling that the Ext rom is already corrupted as the gsm portion of the phone is not functioning properly. I'll do a readup and revert my results. Thanks.
here's the thing. if you have a problem with the CID... all you have to do is find the exe file here named MAUpgradeUt_NoId.exe... use that instead of the exe provided in your Official Rom, i guess that would be WM2003se you are installing.
afaik, extrom havent have a thing to do with the GSM.
Thanks for the reply.
Thing now is that i am trying to downgrade from wm2005 to wm2003 (o2 official asian rom v1.42) But then looks like i am trying in vain.
Tried to do what is in the directions for wm2005->wm2003 by setting it to bootloader mode, doing a hardreset and using maupgrade_no_id with the official nk.nbf
But then it hangs while the check is being done. The xda2s screen shows v2.08 and serial. It changes to usb once the usb cable is plugged in.
Is there any other method i can do to downgrade it ?
hi
i have QTEK 9090 (PH20B) with wm2003SE
ROM version 1.40.00 WWE
ROM date 03/10/05
Radio version 1.12.00
Protcol version 1337.42
ExtROM version 1.40.730 WWE
when I try to connect to my PC ( i try many ) doesnt connect at all only when i put in bootloader it shows USB V2.06
so please help im trying to upgrade to wm 6.1 but doesnt work
Best regards from me
If you want to connect your phone to your PC, your PC needs to have MS Active Sync 4.5 installed on it so it can recognized your phone. if it shows USB V2.06 then you can go on flashing your ROM to the latest one.
sorry connector problem not software
solved