Hi There.
I have successfully upgraded the ROM and Radio using Pug's ROM.
Please can someone explain why after the successful upgrade I cannot pair the original O2 Bluetooth handsfree. XDAIIi detects the O2 BT, but after entering the passcode it keeps “waiting for the device” and errors out. The same behavior occurred before the upgrade. There is nothing wrong with the BT – it works fine with O2 mini. Also my XDAIIi works fine with other BTs ie Motorola.
I hoped that upgrading ROM and Radio would fix it. What else could be wrong?
Please help.
pc
ROM version: 1.11.00 WWE
ROM date : 01/27/05
Radio Version: 1.04.00
Protocol : 1337.42
ExtRom : 1.11.162 WWE
Related
I have Qtek 9090, ROM version: 1.22.00 WWE, Radio version: 1.06.02, Protocol version: 1337.38, ExtROM version: 1.22.167 WWE
Until now, the only problem I had is the "echo" when using BT.
I've installed Tom Tom Navigator and, since then, can't connect with my BT headset.
I had to Hard Reset my Qtek. After that, the BT headset worked OK (still "echo" efect), After I installed again the TomTom Navigator, again the BT headset doesn't work.
Can you help me?
How can i make them work?
Did you experience something like this?
Install TT and afterwards install the latest BT patch.
TT seems to overwrite some BT files to older ones.
Good luck!
Thank you!!
Where can I find the latest BT patch?
http://www.dangaard.com/qtek 9090 bluetooth patch/
Good day,
After 6 months of good relationship, my PC does not recognize my Alpine anymore. Cannot sync with cradle, or sync cable or IR.
ROM Ver 1.11.00 WWE
Date 01/27/05
Radio Ver 1.00.00
Protocol Ver 1337.39
Ext ROM 1.11.923 WWE
r.lovag said:
Good day,
After 6 months of good relationship, my PC does not recognize my Alpine anymore. Cannot sync with cradle, or sync cable or IR.
ROM Ver 1.11.00 WWE
Date 01/27/05
Radio Ver 1.00.00
Protocol Ver 1337.39
Ext ROM 1.11.923 WWE
Click to expand...
Click to collapse
I occasionally get this as well - just soft reset your XDAIIi.
I did try soft and hard reset. I also reinstalled Activesync. All without success.
I installed Activesync on another PC, I get the same message : "device not recognized", which makes me believe my O2 is really faulty.
Help appreciated.
PLZ can anyone help me??
a very serious problem :x
every time i turn on my bluetooth on my xda IIs and after 15 seconds it turns off automaticly and gives me a warning window which says :
(( BTTrayCE Sorry ! Bluetooth can no longer be used because the license is expired .
BDA : 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8
i upgraded the rom but the same problem still appears
can u help me please
Which rom do you use ?
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1337.42
EXTROM VERSION : 1.31.139 WWE
there are some thngs that you may do, you may try hard resettng the device (power+reset), or you may try rom upgrade, there are newer roms available
i tried to upgrade to other roms
also i tried the hard reset many times
the same problem
it's a very strange problem
:roll:
you can download bluetooth stack only and install it you can find it in ftp
now i upgraded to rom :
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1.12.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.40.237 WWE
and still the same problem in bluetooth :?
Try tmobile NL 1.42 rom extrom 1.42.119 i am sure it works
i will make simple explaination for upgrade procedure so if you make a mistake we can figure it out more easy
1. download the rom from here
2. extract it using winrar to your computer
3. download MaUpgradeUt_noID from here
4. extract it to the same folder in which you extracted the rom
5. put your device into bootloader mode (pressing power+reset+record buttons at the same time until "Serial" shows on display)
6. put your device in the cradle
7. run MaUpgradeUt_noID.exe
8. after upgrade press reset to leave bootloader mode
that is all
please post if that was helpfull
Thanx for Help But i still have the same problem in bluetooth
now i have this ROM :
ROM VERSION : 1.42.00 WWE
ROM DATE : 09/05/05
RADIO VERSION : 1.13.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.42.119 WWE
Now i'm thinking if it is a hardware problem coz i made all the software solutions .. :?
any way TANXXXX 4 ur Help
Hi All,
I Upgraded my I-mate PDA2K with the i-mate 1.40.176 rom and now i get and error when I try to use the camera.
Failed to Initialize Camera.
Please Reset Hardware.
36001:100:2
I have tried a soft reset and a hard reset, I also re flashed with T-Mobile UK 1.42.112 and O2 UK 1.40.242 but the problem is still there.
Also the camera button is mapped to Media player instead of the camera I have re mapped this under buttons in settings but if you do a soft reset it losses this and reverts back to media player.
Any help would be greatly appreciated.
Current Config:
Model No.: PH20B
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1.40.242 WWE
Try to upgrade it to wm5 and if you really want stick with wm2003 then you can downgrade.
hi
i have QTEK 9090 (PH20B) with wm2003SE
ROM version 1.40.00 WWE
ROM date 03/10/05
Radio version 1.12.00
Protcol version 1337.42
ExtROM version 1.40.730 WWE
when I try to connect to my PC ( i try many ) doesnt connect at all only when i put in bootloader it shows USB V2.06
so please help im trying to upgrade to wm 6.1 but doesnt work
Best regards from me
If you want to connect your phone to your PC, your PC needs to have MS Active Sync 4.5 installed on it so it can recognized your phone. if it shows USB V2.06 then you can go on flashing your ROM to the latest one.
sorry connector problem not software
solved