Hi All,
I Upgraded my I-mate PDA2K with the i-mate 1.40.176 rom and now i get and error when I try to use the camera.
Failed to Initialize Camera.
Please Reset Hardware.
36001:100:2
I have tried a soft reset and a hard reset, I also re flashed with T-Mobile UK 1.42.112 and O2 UK 1.40.242 but the problem is still there.
Also the camera button is mapped to Media player instead of the camera I have re mapped this under buttons in settings but if you do a soft reset it losses this and reverts back to media player.
Any help would be greatly appreciated.
Current Config:
Model No.: PH20B
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.15.00
Protocol version: 1337.45
ExtROM version: 1.40.242 WWE
Try to upgrade it to wm5 and if you really want stick with wm2003 then you can downgrade.
Related
Good day,
After 6 months of good relationship, my PC does not recognize my Alpine anymore. Cannot sync with cradle, or sync cable or IR.
ROM Ver 1.11.00 WWE
Date 01/27/05
Radio Ver 1.00.00
Protocol Ver 1337.39
Ext ROM 1.11.923 WWE
r.lovag said:
Good day,
After 6 months of good relationship, my PC does not recognize my Alpine anymore. Cannot sync with cradle, or sync cable or IR.
ROM Ver 1.11.00 WWE
Date 01/27/05
Radio Ver 1.00.00
Protocol Ver 1337.39
Ext ROM 1.11.923 WWE
Click to expand...
Click to collapse
I occasionally get this as well - just soft reset your XDAIIi.
I did try soft and hard reset. I also reinstalled Activesync. All without success.
I installed Activesync on another PC, I get the same message : "device not recognized", which makes me believe my O2 is really faulty.
Help appreciated.
hey all I tried to put the upgraded cam patch onto my XdaIIi and it went wrong and now all the screen says is:
SERIAL
V1.01
whats wrong with it and more importantly how do i fix it?
thanks
put your device to the cradle and run the upgrade proses from your pc. Im sure you can done it.
Thanks
thanks cluster, its back to normal now I crapped myself for a minute
is this right?
ROM version: 1.11.00 WWE
Radio version: 1.04.00
Protocol version: 1337.42
ExtROM version 1.11.162 WWE
Yes, for some reason your device (correctly) went into Bootloader mode, but the process wasn't finished.
It doesn't matter, so long as you run the entire firmware flashing process from start to finish and keep the device in the cradle until it says finished on your PC, you should have no problem.
PLZ can anyone help me??
a very serious problem :x
every time i turn on my bluetooth on my xda IIs and after 15 seconds it turns off automaticly and gives me a warning window which says :
(( BTTrayCE Sorry ! Bluetooth can no longer be used because the license is expired .
BDA : 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8
i upgraded the rom but the same problem still appears
can u help me please
Which rom do you use ?
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1337.42
EXTROM VERSION : 1.31.139 WWE
there are some thngs that you may do, you may try hard resettng the device (power+reset), or you may try rom upgrade, there are newer roms available
i tried to upgrade to other roms
also i tried the hard reset many times
the same problem
it's a very strange problem
:roll:
you can download bluetooth stack only and install it you can find it in ftp
now i upgraded to rom :
ROM VERSION : 1.40.00 WWE
ROM DATE : 03/10/05
RADIO VERSION : 1.12.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.40.237 WWE
and still the same problem in bluetooth :?
Try tmobile NL 1.42 rom extrom 1.42.119 i am sure it works
i will make simple explaination for upgrade procedure so if you make a mistake we can figure it out more easy
1. download the rom from here
2. extract it using winrar to your computer
3. download MaUpgradeUt_noID from here
4. extract it to the same folder in which you extracted the rom
5. put your device into bootloader mode (pressing power+reset+record buttons at the same time until "Serial" shows on display)
6. put your device in the cradle
7. run MaUpgradeUt_noID.exe
8. after upgrade press reset to leave bootloader mode
that is all
please post if that was helpfull
Thanx for Help But i still have the same problem in bluetooth
now i have this ROM :
ROM VERSION : 1.42.00 WWE
ROM DATE : 09/05/05
RADIO VERSION : 1.13.00
PROTOCOL VERSION : 1337.42
EXTROM VERSION : 1.42.119 WWE
Now i'm thinking if it is a hardware problem coz i made all the software solutions .. :?
any way TANXXXX 4 ur Help
Hi There.
I have successfully upgraded the ROM and Radio using Pug's ROM.
Please can someone explain why after the successful upgrade I cannot pair the original O2 Bluetooth handsfree. XDAIIi detects the O2 BT, but after entering the passcode it keeps “waiting for the device” and errors out. The same behavior occurred before the upgrade. There is nothing wrong with the BT – it works fine with O2 mini. Also my XDAIIi works fine with other BTs ie Motorola.
I hoped that upgrading ROM and Radio would fix it. What else could be wrong?
Please help.
pc
ROM version: 1.11.00 WWE
ROM date : 01/27/05
Radio Version: 1.04.00
Protocol : 1337.42
ExtRom : 1.11.162 WWE
After a reset, my qtek 9090 displays "NO GSM" and "D 5.60.00 WWE". At device Information, shows:
Rom version: 5.60.00 WWE,
ROM date: 03/02/05.
RADIO version: (EMPTY)
PROTOCOL versionEMPTY)
and ExtROM versionEMPTY).
When i run an upgrade with "MaUpgradeUt_noID.exe" and nt.nbf, it works. But it dont accept radio_.nbf (ERROR 114).
Any idea? ty.
first try a soft reset (power botton + reset)
if u get still no radio
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
follow this great tutorial and u'll get radio back
I followed the wiki tutorial.
Still no radio rom...
Could it be more than a software problem?
Try to press reset once, and then before the R: NONE G: NONE and D: (something) appears press reset again.
This should normally happen when removing battery and it is a common problem.
Is that what's happening to you ?
JP