just as subject says. i don't have windows anymore. i doubt the windows flashing utility will work in Wine emulator, but haven't tried
starik said:
just as subject says. i don't have windows anymore.
Click to expand...
Click to collapse
bootloader, wince rom or extended rom ?
I don't advice to flash the bootloader (but it is possible)
The wince rom should be flashable,
but nobody have tested the code.
extended rom can't be flashed because there is no linux driver for DoC G3 so far.
i doubt the windows flashing utility will work in Wine emulator, but haven't tried
Click to expand...
Click to collapse
Don't try 8) :roll:
i want to give WM5 a spin, so yes, that means wince + extended.
where can i find the code for that?
and if something goes wrong, can i still recover with windows flashing proggie?
not extended, that is done manually as noone knows how to re-compile an extended rom image
cr2,
so how do you flash it from linux?
Same question - how can I flash my vanilla-wm6-image under linux or mac os x or any other *NIX-OS?
[email protected] said:
Same question - how can I flash my vanilla-wm6-image under linux or mac os x or any other *NIX-OS?
Click to expand...
Click to collapse
Is this a wm6 image for the blue angel
hardingt0110 said:
Is this a wm6 image for the blue angel
Click to expand...
Click to collapse
no, for the hermes
Related
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Version
Is it version 2.6?
robjae said:
Is it version 2.6?
Click to expand...
Click to collapse
no......... but it works with vista with the original rom.
Tmo
There is a 2.6 on the T-Mobile site for the MDA.
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
Faria, I dont know how to remove the coutry id check but will be great if you upload it to the ftp for those that have problems(like me) using old ruu in vista.
Thanks.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
XP OS & Vista OS
I have not been successful in getting this to work in Vista OS, so I just created a partition and installed XP as second OS. Hey, it works until bugs worked out of Vista.
Hi Faria!
Just to let you know that I've just contacted the guys at I-mate regarding this problem and they said there's already one version coming soon.
Hope it does not take so long!
Regards,
RUU from Cingular
I can flash my phone with Vista, with the offical Cingular 2.25 (which uses RUU 2.5.2) ROM. When I replace the nk.nbf, it can't open the file. Maybe this helps. If anyone knows what the RUU looks for in the rom file, maybe we could fix it.
Did you tried tools than enable all buttons of an application ? (I've done than quite a long time ago and it worked) ?
EDIT : have a look at http://www.angelfire.com/falcon/speedload/Enabler.htm
any luck on this?
faria said:
ok...so i got a windows vista update utility for the HTC wizard ,but now i need help to modefy the utility to work with custom roms....we need to remove the contry id check.etc.....if you know how to do it please contact-me.
temp made stiky.as this will benefit everyone
Click to expand...
Click to collapse
could u please give me the vista update utility?
sry, just wanted to ask:
could it be possible to run the htc touch os / rom on the wizard? i love the "iphone-style" touch control.
thanks drd
Check the WM6 forum for the Wizard...touchflo is all over the place...time to get off of WM5 and explore uncharted territory...
http://forum.xda-developers.com/showthread.php?t=313656
jpflaw00 said:
Check the WM6 forum for the Wizard...touchflo is all over the place...time to get off of WM5 and explore uncharted territory...
Click to expand...
Click to collapse
Since some of us run linux and need the dun connection we can't go to WM6. Is anyone porting touchflo to wm5?
famewolf said:
Since some of us run linux and need the dun connection we can't go to WM6. Is anyone porting touchflo to wm5?
Click to expand...
Click to collapse
Its not something you can just wrap up into a cab and install. It has to be built into the system. Therefore, either way ,you'll have to flash the device. Why not flash from an SD Card?
BBowermaster said:
Its not something you can just wrap up into a cab and install. It has to be built into the system. Therefore, either way ,you'll have to flash the device. Why not flash from an SD Card?
Click to expand...
Click to collapse
Flashing the rom is not the issue and I do have access to a windows machine with activesync when necessary..the issue is my MDA is my primary internet source (edge connection) and I tether to my laptop which runs linux...all the WM6 rom's have removed the bluetooth dun profile and the usb connection is no longer recognized either ..in a nutshell unless you have better luck getting PAND to work under linux than I did, linux users HAVE to stay with WM5 till something changes in either linux or the rom's being provided.
Hello,
I want to flash a new ROM to my Kaiser, and I have Windows 7 on my desktop.
Is there a problem with flashing with Windows 7?
Thanks in advance!
No problem whatsoever as long as your drivers are up to date and you flash as administrator. And make sure it's HardSPL'd.
YevgenyEfter said:
Hello,
I want to flash a new ROM to my Kaiser, and I have Windows 7 on my desktop.
Is there a problem with flashing with Windows 7?
Thanks in advance!
Click to expand...
Click to collapse
I have been able to do it on Windows 7 32-bit without any problems. The only thing I can say is to make sure that you have the Windows Mobile Pack installed (I think there is a link on this site for the driver pack).
Thanks! Just wanted to make sure there is no problem with it.
No problems with Windows 7 64-bit either
stuntdouble said:
No problem whatsoever as long as your drivers are up to date and you flash as administrator. And make sure it's HardSPL'd.
Click to expand...
Click to collapse
is this sure?because i didnt update and i cant flas any roms on my Kaiser...
so..is there any tutorial how toflas a new rom in win7 on my Kaiser?
materijalmen said:
is this sure?because i didnt update and i cant flas any roms on my Kaiser...
so..is there any tutorial how toflas a new rom in win7 on my Kaiser?
Click to expand...
Click to collapse
More searching or flash via sd card
I recently androided my Vogue and have been quite happy with Super Froyo.
My question is how do i reset back to WM6? (I tired hard reset, still booted with linux)
Thanks.
what carrier are you on?
thoughtlesskyle said:
what carrier are you on?
Click to expand...
Click to collapse
My carrier is Verizon wireless.
Thanks
Copy one nbh from windows section's rom and flash it like android.
l1q1d said:
Copy one nbh from windows section's rom and flash it like android.
Click to expand...
Click to collapse
I'm not sure if i follow.
Do you mean download a rom from the windows section and rename it androidinstall and put it in the andboot folder? Tried that. My PC wont recognize the device under activesync because it isn't windows mobile.
Has anyone tried switching back to WM?
Thanks
rename the nbh file from one of the windows rom,
put it in /sdcard like for android one
flash it like android.
or
boot the phone in 4 color mode
start the customruu in windows of the selected rom.
l1q1d said:
rename the nbh file from one of the windows rom,
put it in /sdcard like for android one
flash it like android.
or
boot the phone in 4 color mode
start the customruu in windows of the selected rom.
Click to expand...
Click to collapse
How do I boot it into 4 color mode again?
Thanks a bunch.
Escotric said:
How do I boot it into 4 color mode again?
Thanks a bunch.
Click to expand...
Click to collapse
Power button, camera and stylus pressure
How to flash my P3600 on a MacBook OSX Snow Leopard 10.5
bruno r said:
How to flash my P3600 on a MacBook OSX Snow Leopard 10.5
Click to expand...
Click to collapse
use SyncMate !! if you interest go to ~ http://www.macupdate.com/app/mac/26317/syncmate
Well, my problem is not syncing, i have Missing Sync for that.. i need to flash a new rom into my device and the flash tools are all for windows.. Is there any for mac?? or this sw is capable to do that?
bruno r said:
Well, my problem is not syncing, i have Missing Sync for that.. i need to flash a new rom into my device and the flash tools are all for windows.. Is there any for mac?? or this sw is capable to do that?
Click to expand...
Click to collapse
maybe, but still need a utility such as Boot Camp
Hakim Rahman said:
maybe, but still need a utility such as Boot Camp
Click to expand...
Click to collapse
I've read that somewhere but i don't unsderstood if i have to instal windows on my mac to do so...
Yeah, you have to install windows, boot camp allows you to do it on mac.