Database Develop

T-Mobile ROM installation and a few questions.

after searching through Google and MoDaCo, I've come to the conclusion that the latest ROM for the Vario is 1.6.2.4 (WWE)
As far as I understand, there was supposed to be another update but it's been pushed to July.
This update is the AKU2 update (I dont know what it means)
Some said that installing the iMate K-Jam AKU2 onto the Vario will work, but will remove all T-Mobile apps and settings.
Is this true?
If so where can I get the apps and settings back as T-Mobile's website is a blank.
Now if all is well, where do I get this latest ROM?
Should I take any precautions?
What will I gain and lose system wise?
Finally, does anyone know where I can unlock the device.
Sorry for the truck load of questions.
Just want the best since I just got my vario and it seems pretty sluggish. A person from esato said that AKU2 would fix that.
What is the best ROM to install onto my T-Mobile (recommended)
(also, if the rom isn't like a regular executable, how would I install it?)
Kind regards!

Go to the Wizard forum and read the lokiwiz thread for unlocking - essential if you want to run different ROMs
A search on TMobile settings will bring up many posts but it's going to vary according to whether you use TZones or the unlimited internet access.
Apart from the internet access and, maybe, MMS I'm not sure what other TMobile stuff anyone would want.
I run the latest QTEK ROM and can recommend it for speed, stability etc etc and configuring MMS and Internet is no issue.

thank you very much for your prompt reply.
I did spot Loki and unlocked my phone, however I assume you mean CID Unlock am I correct?
What I was referring to when mentioning losing anything was any apps.
I am unsure if there is anything that T-Mobile Provides that I will need.
Is there any program that can back up the whole phone for free?
(that way I can back up settings and apps, upgrade the rom and then restore everything)
you recommended the Qtek rom because it's the latest, there were a few roms which said "Latest" but were not, just so that I do not make an error could you link me to the correct thread?
As I'm sure you understand, I'm worried that I might do something stupid and end up with a brand new brick.
edit:
I just purchased SPB Backup.
I'm hoping that'll be enough.
edit2:
I noticed in a thread below my thread that the latest Qtek rom causes some battery miscalculation and a drain for some. Is this still the case, is that the latest rom?
Can you link me to the appropriate rom?
Sadly it seems the battery meter is moved to the top.
Is it recommended that I wait for the T-Mobile Rom to be released?
What am I missing out on, besides better speed (since mine lags like nuts)
I'm sorry again for the questions. Perhaps my thread can be a sticky for beginners?
Kind regards, and thanks again.
Kei
edit3:
lol this is the first time this has happened (I recentley unlocked the phone and did a backup) but it just soft reset on it's own...
Is this common?

Wow, lot of information.
Latest QTEK ROM is the 186504-ruu_9100_2170702_21707102_20710_qtek_wwe_ship.exe
You need to CID unlock to install ROM's from other vendors.
There should not be any downside to the process though I'll qualify that when dealing with technology anything can happen. Read the lokiwiz thread in full and you'll see most of the good and occassional problem.
Not having ever used a TMo ROM I don't know what they bundle in there. However, I use TMo service with the QTEK ROM and have no issues - just had to cingure the GPRS for internet and the MMS settings.
No idea what the soft reset could be I'm afraid.

would you (or anybody)
be able to confirm battery problems after installing the latest Qtek rom?
(Or battery miscalculations)
I've downloaded a file called RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe
I'm assuming thats the right one.
Does anyone know how to get the battery icon at the bottom and the clock at the top AFTER installing the Qtek rom?
Although people say the rom is more stable (wont reset so much)
I still don't know what I'll be gaining. Of course if it'll double to speed then it'll make it much worth it, because the K-Jam is sllooooow.

well it's been a while but I just wanted to confirm that the battery is indeed inaccurate.
I haven't found a way to move the battery icon and clock around.
Is the rom I mentioned still the latest and best?
Can someone link me to the latest and/or best (EVEN if it is the same ROM)

A helping hand needed to upgrade my MDA Vario!

Hello guys!
I got my MDA Vario last week, and I am very much impressed with it!
I got the MDA Vario brand new without a contract and my intention is to use it with one of those O2 Genie PAYG SIM cards. So.... after much reading this excellent forum I figured out that I would need to unlock the SIMlock on the Vario. Got hold of the Lokiwiz utility, followed the advice on these forums, and tested it with the Orange SIM in my regular phone, and hey presto.... MY PY PHONE IS UNLOCKED!
Next step - to remove all T-Mobile customisations. Again, I had a simple bit of advice from one of you good folk - hard reset, then soft reset when the phone starts to install customisations and now all the pink girlie stuff has gone! Only reminant of T-Mobile left on the phone is the logo on the phone dial keypad.
My thoughts are now with upgrading the ROM. T-Mobile have been very slow with updating their ROM package -a new one is apparently due very soon. Now.... in preparation of installing a new ROM, Ive CID unlocked my phone. I would really like to know which ROM I should upgrade to - there are so many out there! As the phone has been CID & Sim Unlocked, does the phone remained unlocked irrespective of what ROM I install? Can I install a T-Mobile ROM after changing it to another?
As I intend to mostly use an O2 PAYG SIM in it, would it be better to use a new 02 update? If so, which one? Or do I go for another ROM? All very confusing! Finally, Ive heard that I cannot browse the net via GPRS on an 02 PAYG SIM. Is that true? Do I need to flash an ExtROM too?
I know Im asking a lot here and am being a bit of a pain in the backside, but I would really appreciate any and as much advice as possible as I realy dont want to end up with a dead phone! Many thanks in advance!

Hi, yes you could wait for the new rom and i am a believer in sticking with your manufacturer roms because many of the posts here seem to people experimenting with different roms and it all going wrong - lol.
But if you do upgrade proberly the commonest choice is the aku2 qtek rom that i use
download here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
and the o2 aku2rom not a bad idea too, but without the o2 extras.
Yes you could then upgrade to the t-mobile rom then but often you need to unlock again with lockiwiz 0.3a.
PAYG o2 will browse internet but msn etc.. does not work.
btw yes you are a pain in the arse but then most people here are!! :lol:

Cheers Mark! Nice to have some basic advice - very reassuring for a thicko newbie like me!
Well... I couldnt wait for the new T-Mobile ROM and went ahead with the upgrade with the Qtek upgrade you suggested.
Was a little tricky at first because the upgrade wouldnt happen (port failing to open) but I had a few programs running in the background on my desktop PC and shut them all down so that I had a `Clean` PC. The upgrade process was then as smooth as a babys bottom.
MDA Vario is running really well - well worth the upgrade IMO. Everything seems quicker and generally better. Only problem I have is with wifi - it seems to take ages to make a connection with my PC (ad-hoc peer to peer) whereas on the original T-Mob ROM it was very quick. Any ideas here?
I read that you say I would need Lokiwiz 0.3a to install the AKU2 T-Mob ROM when it is eventually released. I was under the impression that once the PDA was unlocked (lokiwiz 0.2b) I wouldnt need to unlock it again. Is it different with the very latest T-Mob ROM? Can I not revert (downgrade) to the original T-Mob and then upgrade to the new T-Mob ROM? Ive not heard of lokiwiz 0.3a being out yet - would it be as simple as unlocking with lokiwiz 0.2b?
Finally, how on earth do I get the latest 02 ROM? I need to enter my 02 mobile number and IMEI to download it. Do I need lokiwiz 0.3a to install that or any other current ROM?
Cheers for your friendly advice.
Al.

Hi, no problem - glad to help.
Lokiwiz 0.3a is out see here http://forum.xda-developers.com/viewtopic.php?t=50768
For some reason when upgrading (in think it renews cid/spl) to aku2 rom seems to lock again - i had to unlock my qtek with above tool.
Yes you can go back to original rom - but if does not work use farias method of unlocking and downgrading rom (post is in this forum)
Most of the roms are in the wiki http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
including the o2 roms, but i would refrain from too much chopping and changing because you can destory the bootloader and then has to go back to the manufacturer.
Many reported problems with the wifi setting up - i would read some of the threads in the wizard forum if i was you. First thing to try is tweak wifi on device to wlan g and it may work better.
see registry tweaks here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
btw good to hang out in the wizard forum too - you will learn alot of tips from there.

Want to also say thanks from another newebie with T-Mobile MDA. Have unlocked phone and CID and flashed with 2.17 QTEK ROM and all is good.
Thanks !!!

if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..

Jesus sbouri that logo was killing me, brilliant tip, nice one mate!!!

hi
i just got my mda vario and manage to unlocked the phone with lokiwiz03. i know my phone is now sim unlocked, but how do i check if it is cid unlock as well?
i am eager to flash the rom with the qtek version but i have no idea how to do it.
i know i must have my phone cid unlock in order to install a different rom, so do i just download the latest qtek rom, connect my device to usb and activesync it, and then just run the RUU?
i am really noob here.
cheers.

Hi mate if i was you i would use MR CLEANS ROM i flashed with that and its excellent, tottaly clean with no tmobile crap and i didnt do anything with the cid so dont worry.
ftp://xda:[email protected]/Uploads/Wizard/ROMS/MrClean_RUU_WIZARD_224_AKU23_WWE.zip
Just download this and run follow instructions, real easy. Good luck mate.

thanks for the advice...i took a bold move and flash it with a qtek rom. works like a charm. before that i did cid unlock using lokiwiz02a, not lokiwiz03.
i will take a look at mr.clean rom at a later stage.
i notice that my imei number is different from the one in my box. does flashing the rom change it?
now my next task would be update to a better radio rom and check out the extension rom.
cheers.

SBouri said:
if you want th get rid of the tmobile crap on the face...use a 2p coin and move it downwards...not accross
it takes the tmobile paint etc off without any marks..
Click to expand...
Click to collapse
Great tip, worked like a charm and left no marks.
Thanks.

Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks

Scottland said:
Hi there, I'm about to flash my UK MDA Vario too.
I'm not sure to use the Mr clean one or the Qtek 2.17 version.
Before I do anything, which is better of the two?
Also, what settings to I need backed up? I have my txt msg service numbers, as well as voicemail. And all of my MMS & GPRS settings.
Am I to assume that all I have to do is input the settings into the device once it's been flashed?
Thanks
Click to expand...
Click to collapse
The mr clean rom is a more advanced rom and has no extras. The qtek official rom is probably a safer install because its an official rom and many good reports of success and users pleased with the outcome.
Yes when you have flashed just input all those settings again.
Plus you can backup your voice tag database between hard resets by copying the file CommandModel1.bin found under the windows folder to your pc or to the memory card. After rom upgrade copy it back to your windows folder and all your voice tags are back!
Create backup of windows\start menu - most programs that are on the storage card dont need a reinstall.
Create copy of pim.vol in the root directory of the device - contains contact and appt information. After flash change the new pim.vol to pim.vo and copy and paste old pim.vol (use total commander or gsfinder file explorers for this) and soft reset and you will have info back.
Create backup of windows\favorites - for all your internet favorites.
That will make restore a bit quicker than otherwise.

Cheers for the info. I was actually thinking of trying the Mr. Clean one first, is there anything missing from this one, or is it just less stable?

Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.

meschle said:
Mr clean is just a clean rom without any of the manufacturers addons. It will probably run very well - its the flashing process with it that may not be as safe as an original rom and may possibly destroy your bootloader etc.. so you have a brick phone. I would always go for the safest option and would not suggest chopping and changing roms. Read the many users stories where everything goes wrong and the forum needs to help them out.
Click to expand...
Click to collapse
True, I didn't think about that. Thanks again.

Ive been using Mr clean rom for 1 week now and its excellent from my experience. Its tottaly clean and runs so fast!
By clean i mean it has no customizations as you will find on official roms. It flashed just like any other rom too. Easy as pie. Just my info as people would like to know.

I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?

Scottland said:
I've just upped to the QTEK ROM, and I've a couple of problems, nothing too serious though I don't think?
Firstly, when making my GRPS connection - I can't seem to find anywhere to input the WAP Proxy settings?
Edit, sorted this one now
Secondly, when settinp up my MMS - I can't select connect via Picture Message in the settings, it's not there?
I'm guessing this is some other connection I have to make up?
Any idea guys?
Click to expand...
Click to collapse
I cant find what you say under settings - what does it do?

Never mind ignore me, that'll teach me not to read T-Mobile's site correctly

help quick! thinking of upgrading my radio rom!!

can anyone explain which one is the best one for 8125 g4 locked
and how im am to go about it thanks alot sorry for the noob question

Just depends on your operator, so you need to try yourself and find out which is the best one.

i have at&t and running on wm 5

Basically, like starkwong said, it's pretty much trial and error. You have to try out all of the different Radio ROMs to find out which one works best for you in your area. Nobody here can really tell you for sure which one will work the best for you, unless maybe they live just down the street from you or something.

i know that im just asking is it safe and not brick my phone because its not unlocked in anyway

Normally Radio ROM can be updated directly with the Update Software (RUU) regardless unlock state of CID.

OH NO!
I have a Cingular 8125 G3 unlocked and have TNT's Touchflo rom on it. I tried updating my radio using Faria's 2.69.11 updater, but now my phone won't work, usb won't work, and when I reboot, it reads the IPL/SPL is still 1.xx and the OS is 6.00.0.0 but there is NO GSM line at all! Seeing how I can't the usb to work, I can't flash it with the T-Mobile rom or anything, however I can transfer things onto the phone via IR. So is there something out there I can use to fix at least the usb so I can reflash my phone. Thanks in advance!

Got it!
Nevermind, I got it working. I was able to transfer the bootloader.exe file over to my phone, ran it, and then was able to reflash my phone. Whew, I was so scared. Anyhow, thanks for all the info on this page, I love this site!

Should I get a TyTn?

Morning all
I have been offered a swap for my iPhone for a brand new boxed Orange TyTn II and Im just wondering if its worth doing?
I have had previous windows mobile phones and do like the phones so I am considering the trade, I am currently on o2.
The thing is i have read all the posts about unlocking and flashing roms etc and im a little on edge about doing it myself as im sure i will break it lol
I would basically need to sim unlock the phone and remove all the orange software as I think it looks naff!
How much work is envolved in doing what i need and how long would it take?
Sorry if im repeating a post, im not the best at forums and get lost with all this info you guys have!
Cheers
Sy

Absolutely YES!!!
There is no contest. The TyTN II wins hands down!!!
Leave well enough alone. Perhaps get a sim unlocker. Just do a search and you should find something. But don't play around with flashing roms etc. You may regret it.
Use the HTC original apps which you will find on a sticky at the beginning of this forum.

You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps

I'm wondering if i should get a TyTn 2 now or wait for a Xperia.
Checked out the TyTn at a store a couple of days ago and i loved it, the only thing i didnt like was that it doesnt have a radio. Then i read around in this forum and came across the driver problems and the touchscreen bug and due to them i'm more inclined to wait for Xperia, but then i checked out Xperia's design and i didnt like the way the keyboard slides to, makes you operate the joystick with the right hand instead of the left and that's kind of uncomfortable.

seriously, who uses radio? I stream my Sirius satalite radio..
Sirius Pwnz AM/FM

..........

Audio said:
You'd be suprised how easy it is to Flash the Tytn II, the only things you have to remember is:
Flash Pof's HardSPL first,
Then Flash your ROM,
And make sur eyou have a Radio that is compatable with the ROM you've chosen (although if you have an incompatable radio, your device will still turn on and function, you just won't be able to use certain elements, calls/gps/etc)
Plus, you'll notice a MASSIVE speed increase when you've flashed to a new ROM
Hope this helps
Click to expand...
Click to collapse
dont you need to CID unlock it first? what is this hardspl and what does it do?

jonneymendoza said:
dont you need to CID unlock it first? what is this hardspl and what does it do?
Click to expand...
Click to collapse
Yes you MUST CID unlock as well (unless it has already been done, which is doubtful if it is on Orange).
My advice...Before even getting the TYTN II, read the sticky's and Wikis in the upgrading ROM section at least 3 times over to ensure you have an idea of what you are going to need to do before even doing anything. when you think you understand it, read them again.
Then go ahead and flash any ROM you fancy and enjoy the benfits of the TYTN II voer the Iphone.
HardSPL is the replacement bootloader that allows you to install an non original ROM.

Im on T mobile and i hav heard that the ROM is not heavily branded. im just worried about bricking it. i already have the MDA viara 3.
reading this thread http://forum.xda-developers.com/showthread.php?t=334679 doing hardspl, does that automaticly unlock the CID or is there another tool to do that? if so do CID unlock it first and then hardspl?

You will NEED to CID unlock AND HardSPL...Do not consider doing anything untill you are 100% certain of the steps you are performing and why, otherwise you will have a rather expensive paperweight.
EVERYTHING you need to know and more about Rom flashing is contained here
http://forum.xda-developers.com/showthread.php?t=369282
Seriously, ensure you read every link and sub link related to ROM flashing. Even make sure you read the "inspirational reading" bit, that will give you the confidence to try it.
As long as you read you will be fine.
When I was new here I spent 4 days solid reading reading and reading before biting the bullet and flashing my first ROM. At

Thanks for the advice. one small question. if i was to follow this guide : http://forum.xda-developers.com/showpost.php?p=1790046&postcount=3 word for word i should be succesful?
there is one question i am still confused about and thats this hardspl/cid unlock. according to the Thread i linked, all i got to do is follow the guide from HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) and bam im ready to Flash the ROM?
also what are the major benefits of flashing to a custom ROM?
does the procedure from that last link above hardspl AND CID at the same time?

hi i managed to hardspl my device succesfuly. so im ready to install a new cooked ROM? what are the best ROMS out there that i can try. i have seen dutty's ROM that many have used and was wondering if thats the best one
Does the DUTTY rom improve the camera and video playback?

New to my diamond, interested in a cooked ROM

Hi there, im fairly new to my Telus Diamond, i love this phone but its giving me some grief with the Touchflo3d being laggy etc...
Anyways I heard you can flash new ROMS that are custom and more stable and help out the phones performance a lot but i have a few questions before I flash.
Here's my phones specs before i ask my questions.
ROM Version: 1.06.661.1 (old i believe)
ROM Date: 07/21/08
Radio Version: 0.99.90v
Hardware Version 0080
and i dont think the rest is important.
And im usuing WM 6.1
ok now here are my questions:
1) If I flash to a cooked ROM, i heard it Erases EVERYTHING, so with that in mind, im a telus customer, does it effect my service plan, ex: can i still use my phone like i bought it and make txt msgs, emails, msn, phone calls etc.. or do i have to set it back up again?
2) Do i have to use the same Radio Version?
3) would my Current network number and Cureent Channel be changed? If so how does that effect my phone?
4) umm with my programs that are on my phone, ex: office mobile, WMP, MP3 trimmer remote desktop etc... will i still have those? Or will i loose the registration for them.
5) this is my last question i believe, would I have to dump my current stock ROM for a backup? Like is that recommended or is there a backup of my ROM already on this website.
I appreciate any help, and sorry for being such a noob. The only thing i've flashed before was a custom firmware on my PSP lol and that was reallly easy...

1)Yes it erases everything the easiest way to explain it is like this: "rom" stands for read only memory.... kind of like a cd rom. And the outcome is the same also, when you flash a new rom it is like writing a new cd image.
2) no you don't have to use the same radio version, but some roms will require certai n radios (most roms come packed with radios though so you shouldn't have to mess with it)
3) Flashing a new rom changes your phone but not your network (your number would still be the same)
4)You will lose anything you installed unless you back it up. Depending in the rom, office mobile and stuff like that might be preloaded.
5) There should be a backup on the website, a dump should not be necessary.
Again on the backup thing you will want to back up are your contacts sms emails ect anything you want to keep before flashing.
Flashing isn't hard, you just need to read the directions MAKE SURE YOU READ BEFORE YOU FLASH. like i said it isn't hard but if you don't read everything before you flash you may turn your phone into a very expensive paper weight.
PS here is a good place to start your reading:
http://forum.xda-developers.com/showthread.php?t=416211

Alright sweet thank you very much
Im not going to upgrade just yet though because i still want to learn more
about it and im iffy about it mainly cuz i still want to be able to make phone calls lol and i dont see anyone posting anything for the telus versions.
Oh and one more thing before I upgrade the ROM do i have to upgrade the HardSPL first? or can i just use the CID lock, then the ROM?

no, you defenetly would want to cid unlock first, otherwise you will trash your bootloader and brick your phone

ok so Cid unlock, HardSPL, then flash the rom

hard spl is cid unlock after unlocking you are free to flash away

Oh ok, gotcha haha
.. i hope

One more thing lol sorry...
Um that link you sent me for the steps
"[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!"
Well i dont know what CDMA means but Im pretty sure im a CMDA user. So is it safe to still fallow those directions? or must i need to do something different.

read post #4 in that thread, you can't miss it.

is it alright if my Diamond says DIAM500? on all the guides they say DIAM100, when you check the SPL, mine is stock and in the tri colored screen it says:
Security Unlocked
DIAM500 <------ (Do i have to find a ROM specific for this modle?)
SPL-0.57.0000 <------ (I dont see this ver. on the forums anywheres)
MircoP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20
Serial
(its blank)
I didnt run any CID unlockers or anything, any insight?
Dang Telus...