Related
Hi,
i upgraded my charmer with the new uk t-mobile rom and my nproblem is that the battery does not charge,and i don't know how to do
have you some suggestions???
Waiting your answer,thanks a lot,Antonio
Hi did you get a answer
Hi I have the ssame problem, did anybody come up with any ideas ?
Cheers
TBW
Battery Problem
Hi, I have too this problem with wm6 rom have you some suggestions??? pleas
Hi...nobody can help us???
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
vlodeck said:
Try plugging in the charger and when its plugged in, hit soft reset button with your stylus. Wait for the system to boot and see if it charges.
Click to expand...
Click to collapse
i have the same problem and doesn«t work for me
Then my guess is you flashed a ROM not intended for your device.
now how i can solve this?
Reflash a charmer rom? And if that doesn't work, try a prophet WM5 rom.
it says that i don't have enough battery, is lower than 50%
Use the NO_ID RUU version instead.
i already try a few roms and i can't flash the pda with none of them
You will need to reboot in BootLoader mode first (powerkey+camera+reset).
hello!
a downgrade my Charmer and now the battrery is 0%, when i connect to usb phone don't want to start, on charger it startet but battery dont want to charge. help pls ...
Hi,
I have solve this problem but I'm not sure how I've done this.
1. dowlnoad cab from this link http://forum.xda-developers.com/showthread.php?t=327988
2. I have use program Wizard Service Tool and clear everything what is possible including format.
3. reset
4. format after strart camera+record+soft reset
5. after reset bootloader mode, and first time my phone has connet in BLmode with USB.
6. Then I have run original T-mobile RUU and it's working
My battery has been on 0% in system as well but after downgrade battery states about 70%
have a same problem.
did anybody else solve this problem? anybody used SD flashing method?
i've solved problem partly - now battery charges, but i can't start it without power supply. so what have i done:
1) i've downloaded ShellTool_bugfixed.zip (you can easily find it google).
2) unpack it.
3) copy Cert_SPCS.cab and EnableRapi.cab to you WM and install
4) extract nk.nbf from original Charmer ROM into ShellTool folder
5) start ShellTool.
6) press Get ROM Info
7) press Extract OS
10) press Flash OS
11) press ОК
Followed all this steps, now i've got an original charmer os, but bootloader is still from previous crap ROM. so there is trouble with starting it up. If you phone doesn't start even when you charging it from power socket, so try to wet contacts on battery - it should work.
now i thinking how to re-flash bootloader, cuz it cannot enter into bootloader witout power supply from socket. It's no possible to flash it from PC, cuz it cannot enter a booloader plugged into USB port. It seem that there is not enough power impulse to startup.
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
DerGregen said:
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
Click to expand...
Click to collapse
Flash from bootloader. Make sure you're hard SPL though, or that it's a compatible ROM for your CID.
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
manuv1615 said:
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
Click to expand...
Click to collapse
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
DerGregen said:
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
Click to expand...
Click to collapse
You said that you could enter bootloader menu right?
now tell me, whats written there?
i'll wait here,.
Theres a 4 colour screen (red, green, blue and white)
And in the red bar is a text with a yellow font:
KAIS139 MFG
SPL-1.0.0liPof
CPLD-8
And below in the withe bar stands "Serial" or "USB.
What rom did you use?
try HardSPL 3.56 by jockyW,.
then reflash your ROM,.
Hi there,
I had an original german Touch HD and updated it to 1.56 StockROM. So good so far ... then wanted to flash another ROM and flashed 1.56 Olinex HardSPL Wrapper. Worked as well. As it was not possible to flash the ROM I wanted (no USB connection with the bootloader) I wanted to go back and flashed the StockSPL. Unfortunately, this was the 1.14 Stock HardSPL and the flash worked as expexted
Now the HD boots with wrong colors and does not react to screen touches anymore. After a certain time a window comes up with a gwes.exe error message which should be sent to Microsoft.
I tried to Hardreset, but it does not work anymore with the hardwarekeys.
Active Sync does not connect anymore, so I can't access the device as I should to do something ... The system seems to run normally, but no interaction possible ...
Has anyone an idea what I could try? Is there a way to flash from SD card as on the touch diamond? Any autostart application on the SDcard, which causes a hardreset?
I look forward to your suggestions ...
hkr said:
Hi there,
I had an original german Touch HD and updated it to 1.56 StockROM. So good so far ... then wanted to flash another ROM and flashed 1.56 Olinex HardSPL Wrapper. Worked as well. As it was not possible to flash the ROM I wanted (no USB connection with the bootloader) I wanted to go back and flashed the StockSPL. Unfortunately, this was the 1.14 Stock HardSPL and the flash worked as expexted
No the HD boots with wrong colors and does not react to screen touches anymore. After a certain time a window comes up with a gwes.exe error message which should be sent to Microsoft.
I tried to Hardreset, but it does not work anymore with the hardwarekeys.
Active Sync does not work anymore, so I can't access the device as I should to do something ...
Has anyone an idea what I could try? Is there a way to flash from SD card as on the touch diamond? Any autostart application on the SDcard, which causes a hardreset?
I look forward to your suggestions ...
Click to expand...
Click to collapse
Take out the battery for 1-2 min. Then replace batt and hold down the volume down key and press the power on briefly while holding the volume down key. If you see a tri color screen you are ok. You can place a ROM on the SD card and flash from there doing the same above proceedure.
hkr said:
.....(no USB connection with the bootloader)...
Click to expand...
Click to collapse
take off the sd-card, than it should work
so then I could flash either an 1.14 StockROM or a 1.56 Stock HardSPL ...
I'lltry one of them, thanks for your help
bobsbbq said:
Take out the battery for 1-2 min. Then replace batt and hold down the volume down key and press the power on briefly while holding the volume down key. If you see a tri color screen you are ok. You can place a ROM on the SD card and flash from there doing the same above proceedure.
Click to expand...
Click to collapse
I feel better, the tricolor screen appears.
No I tried to flash 1.54 hardSPL and 1.56 official german Stock ROM. Both timers I get the message 'no image file!'
The RUU_signed.nbh is in the root of the 16GB SDcard.
Do I need to flash 1.14 Stock ROM, as I have 1.14 StockSPL installed?
Rename the RUU_signed.nbh to blacimg.nbh.
Always when flashing from SD-CARD you must rename the rom file
to blacimg.nbh
I hope it helps.
Thank you for your help, guys, it is up and running again
Good for you!
My TP2 stopped working ((((((
I was using it with some cooked ROM (i think it's not relevant what exactly). This morning i had my breakfast and i've got an SMS from an acquaintance. After this i couldn't see my home screen anymore, but i could still use start menu and so on. I wasn't first time as this error happened, so i didn't thought anything and just made a reboot. After this i saw bootloader screen and it was message about missing ROM shortly to see. Nohting else, only bootscreen, hard reset didn't work either. So i came home, connected my phone via USB to my notebook, powered it on and started to flash ROM. As flash was successfully complete, the phone rebooted and i saw... bootloader again!
So i don't know what to do now, anybody some thoughts?
Djablos said:
My TP2 stopped working ((((((
I was using it with some cooked ROM (i think it's not relevant what exactly). This morning i had my breakfast and i've got an SMS from an acquaintance. After this i couldn't see my home screen anymore, but i could still use start menu and so on. I wasn't first time as this error happened, so i didn't thought anything and just made a reboot. After this i saw bootloader screen and it was message about missing ROM shortly to see. Nohting else, only bootscreen, hard reset didn't work either. So i came home, connected my phone via USB to my notebook, powered it on and started to flash ROM. As flash was successfully complete, the phone rebooted and i saw... bootloader again!
So i don't know what to do now, anybody some thoughts?
Click to expand...
Click to collapse
If you have a GSM TP2 try running Task 29 before flashing the ROM. http://forum.xda-developers.com/showthread.php?t=649191 After Task 29 then reflash your ROM of choice and then hard reset to make suer everything took.
Good luck
blutruck said:
If you have a GSM TP2 try running Task 29 before flashing the ROM. http://forum.xda-developers.com/showthread.php?t=649191 After Task 29 then reflash your ROM of choice and then hard reset to make suer everything took.
Good luck
Click to expand...
Click to collapse
Yes, i have a GSM TP2. As you advised, i downloaded Task 29, unzipped it and run ROMUpdateUtility.exe from its folder. After 100% phone booted again to the bootloader, I went to ROM's folder and run CustomRUU.exe from it to flash the new ROM. After "success" i disconnected the USB-cable and started the phone... no changes. I still see the bootloader. And i still cannot hard reset my phone for some reason.
Djablos said:
Yes, i have a GSM TP2. As you advised, i downloaded Task 29, unzipped it and run ROMUpdateUtility.exe from its folder. After 100% phone booted again to the bootloader, I went to ROM's folder and run CustomRUU.exe from it to flash the new ROM. After "success" i disconnected the USB-cable and started the phone... no changes. I still see the bootloader. And i still cannot hard reset my phone for some reason.
Click to expand...
Click to collapse
How are you hard resetting your phone? All I do is power it off then hold the send and end keys and press and hold the power button until a message pops up asking if you want to hard reset. Press the vol up key to reset and after it completes press the vol up key to reboot.
Just a random thought here--is it possible your volume down button is stuck?
blutruck said:
How are you hard resetting your phone? All I do is power it off then hold the send and end keys and press and hold the power button until a message pops up asking if you want to hard reset. Press the vol up key to reset and after it completes press the vol up key to reboot.
Click to expand...
Click to collapse
Yeah, I do the same. I hold the both outer keys and the power button but no message pops up, just the bootloader.
BigWopHH said:
Just a random thought here--is it possible your volume down button is stuck?
Click to expand...
Click to collapse
It might be possible, but if i press it, it feels like its OK. However, is there any method to test all the buttons of my phone?
Any other thoughts? Without phone i am totally f*cked up, cause i am not in my hometown right now and i have to keep contact with my business partners in there.
It sounds like your bootloader is somehow broken, if it isn't a problem with the volume down key.
Try searching for information about the "mtty" utility. It's kinda complicated, but I think it's helped people in a similar situation.
steviewevie said:
It sounds like your bootloader is somehow broken, if it isn't a problem with the volume down key.
Try searching for information about the "mtty" utility. It's kinda complicated, but I think it's helped people in a similar situation.
Click to expand...
Click to collapse
Thank's I'll inform myself about "mtty" keyword. But if u say that the bootloader could be broken, maybe i should try to reflash HardSPL or go back to stock SPL?
Djablos said:
Thank's I'll inform myself about "mtty" keyword. But if u say that the bootloader could be broken, maybe i should try to reflash HardSPL or go back to stock SPL?
Click to expand...
Click to collapse
Yes, that's another alternative, at least you can try it.
steviewevie said:
Yes, that's another alternative, at least you can try it.
Click to expand...
Click to collapse
Now I am encountering bigger problems with my device. I tried to use MTTY ver 1.42 first. I couldnt use it because there wasn't an option to choose USB-port. Yes, i unchecked "Connect via USB" in WMDC and killed it then in task manager. Then i flashed stock SPL ver 0.79, hm nothing new. Then I tried to flash the original SPL, i.e. ver 0.84 and it got stuck by 0%. I waited and waited and waited, so i had to remove cable and the battery. After that nothing worked. No flashing worked at all, even Task 29 gets stuck by 0% every time........ I dont know what to do now.....
Can you get into the bootloader still ?
steviewevie said:
Can you get into the bootloader still ?
Click to expand...
Click to collapse
Yes i do. I still see the bootloader showing me current SPL version (0.79 )
So does it still always go into the bootloader ? It won't boot ? If so, have you tried mtty to try and fix that ?
steviewevie said:
So does it still always go into the bootloader ? It won't boot ? If so, have you tried mtty to try and fix that ?
Click to expand...
Click to collapse
As i said above, i could not connect to the phone through mtty, but fortunately i have another laptop here with winxp on it so it works on it. I typed "set 16 0" and "task 8" and it booted again into the bootloader just like before.
Djablos said:
As i said above, i could not connect to the phone through mtty, but fortunately i have another laptop here with winxp on it so it works on it. I typed "set 16 0" and "task 8" and it booted again into the bootloader just like before.
Click to expand...
Click to collapse
Have you tried flashing a ROM using the storage card method? Might be some error being caused but your computer.
The following was taken from http://forum.xda-developers.com/showthread.php?t=550540
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
You might also want to try flashing from another computer.
Djablos said:
Yes i do. I still see the bootloader showing me current SPL version (0.79 )
Click to expand...
Click to collapse
well it seems that you have flashed back to stock spl since it is showing you spl version (0.79)
which means you will have to hardspl it again in order to flash any custom roms again but it is probably unlikely that it will not work because when you reflash stock spl you are suppose to flash stock rom & radio first before flashing stock spl i'm just guessing i'm not to sure on this 1 i could be wrong though
P.S. - just a suggestion since you have stock spl back on the phone try & flash a stock rom to see if that works
Djablos said:
Yes i do. I still see the bootloader showing me current SPL version (0.79 )
Click to expand...
Click to collapse
Is that maybe the problem ? Did you flash the stock SPL back onto it as you referred to earlier ? Because 0.79 is a stock SPL version, so it won't boot a custom ROM with that SPL.
So is the whole problem that you have a custom ROM and stock SPL ? I hope it's that simple, but fear it isn't.
I hope!
Hello,
if you have 0.79 hard spl,
1. you should install stock rom, not cooked. After go to bootloader mode.
2. Run Rhodium-HardSPL_V2_00R3.exe from http://forum.xda-developers.com/showpost.php?p=4363807&postcount=1
3. Install cooked rom!
It is working!
I hope it will help your problem!
blutruck said:
Have you tried flashing a ROM using the storage card method? Might be some error being caused but your computer.
You might also want to try flashing from another computer.
Click to expand...
Click to collapse
Yeah guys, here's what i did and what i see. Before i flashed stock SPL 0.79 i flashed stock ROM and stock radio. Then i tried to flash stock SPL 0.84 and it didn't work for some reason. OK, then I read an advice from Doo Doo and tried to flash stock ROM again. I was wondering that it worked... but as it got 100% the device entered bootloader mode again! But after this the version of SPL was 0.88
I cannot use storage card method because i don't have any possibility to get access to the card from my PC And I just tried to hard SPL my phone from another PC (winxp) so it didn't work either, stuck by 0%.
Try to older stock rom. Maybe it will install older spl...
Sorry, but I couldn't help this problem! :S
i have x1 restart on sony ericsson booting logo
i tried using task29 but always have error 262
then i try to flash using mmc it says completed 100% but my x1 stil restart on logo
is there any solution?
still no solution?
Have you tried a hard reset?
altae said:
Have you tried a hard reset?
Click to expand...
Click to collapse
do you mean hard reset (hold power + left + right button)?
i did, and on the screen shown test "this operation will delete all your bla..bla.."
but when resetting complete, it's still restart when booting and logo sonyericsson appears
is it hardware failure?
I would not give up yet. You say you have tried installing another rom to no avail? Is hard spl installed on your phone? What kind of rom do you use (WM 6.1, WM 6.5)?
looks like your rom is messed up and can't boot anymore.
error 262 means you haven't got hard-spl (needed for task29 as well).
try flashing a new rom, either usb-method or sd-card method should work.
a) flash a stock-rom, doesn't need hard-spl
b) flash a custom-rom, but before that you first have to flash hard-spl!!!
how to do all that -> read the stickies.
altae said:
I would not give up yet. You say you have tried installing another rom to no avail? Is hard spl installed on your phone? What kind of rom do you use (WM 6.1, WM 6.5)?
Click to expand...
Click to collapse
its WM 6.1 before the phone get restart on booting logo, in original spl
caliban2 said:
looks like your rom is messed up and can't boot anymore.
error 262 means you haven't got hard-spl (needed for task29 as well).
try flashing a new rom, either usb-method or sd-card method should work.
a) flash a stock-rom, doesn't need hard-spl
b) flash a custom-rom, but before that you first have to flash hard-spl!!!
how to do all that -> read the stickies.
Click to expand...
Click to collapse
task 29 is not working for my x1. error code [262]
wish me luck
Since you have original X1 SPL and ROM, I'm not sure, try stock ROM that is posted by PavelX1.
If it's customized, try other ROM, it's easy.
altae said:
I would not give up yet. You say you have tried installing another rom to no avail? Is hard spl installed on your phone? What kind of rom do you use (WM 6.1, WM 6.5)?
Click to expand...
Click to collapse
I think so too.....
Need help too!
On a bad day, after flashing a new ROM, my X1 was restarted in boot loader mode and never start OS any more though I tried restart, hard reset... hundred times
Has the ROM died? Please tell me what to do. Thanks.
seabreeze_pham said:
Need help too!
On a bad day, after flashing a new ROM, my X1 was restarted in boot loader mode and never start OS any more though I tried restart, hard reset... hundred times
Has the ROM died? Please tell me what to do. Thanks.
Click to expand...
Click to collapse
Yeah it is happening to me too lately and according to Russell's experience, he tells me to charge the phone @ full battery 100% then flash a new ROM (try other ROM). Task29 can be performed before flashing and removed battery for few secs as williyung recommends it. Good luck!
VSJ said:
Yeah it is happening to me too lately and according to Russell's experience, he tells me to charge the phone @ full battery 100% then flash a new ROM (try other ROM). Task29 can be performed before flashing and removed battery for few secs as williyung recommends it. Good luck!
Click to expand...
Click to collapse
Thank you for your help, but it doesn't work.
I did Task29, then original R3AA-010, then latest "2917 Energy ROM". All flashing by micro SD.
After flashing, I removed battery for a while before inserting it back, pressed power on and nothing but a 3-color screen of boot loader
Help me p...l...e...a...s...e!
seabreeze_pham said:
Thank you for your help, but it doesn't work.
I did Task29, then original R3AA-010, then latest "2917 Energy ROM". All flashing by micro SD.
After flashing, I removed battery for a while before inserting it back, pressed power on and nothing but a 3-color screen of boot loader
Help me p...l...e...a...s...e!
Click to expand...
Click to collapse
try flashing just stockrom and do nothing else (maybe a hardreset after flashing). what happens then?
caliban2 said:
try flashing just stockrom and do nothing else (maybe a hardreset after flashing). what happens then?
Click to expand...
Click to collapse
Followed your guides but nothing better. It still starts in bootloader mode automatically and cannot hard reset too.
it still doesn't find a system despite you flashed stockrom?!
well, then i'd say you have either a hw-failure or you're doing something wrong. i guess it's the second...
- after micro-sd-flash, are you waiting for the "ok" or do you remove your battery as soon as it eaches 100%? (=too early)
- what does it say on bootloader-screen, any error-messages?
flash stockrom with usb-method and see how it goes. you can also try downloading stockrom again, maybe the file is corrupted (unlikely, but...)
i'm saying stockrom because it should always work, no matter if you have hard-spl flashed or not.
caliban2 said:
it still doesn't find a system despite you flashed stockrom?!
well, then i'd say you have either a hw-failure or you're doing something wrong. i guess it's the second...
- after micro-sd-flash, are you waiting for the "ok" or do you remove your battery as soon as it eaches 100%? (=too early)
- what does it say on bootloader-screen, any error-messages?
flash stockrom with usb-method and see how it goes. you can also try downloading stockrom again, maybe the file is corrupted (unlikely, but...)
i'm saying stockrom because it should always work, no matter if you have hard-spl flashed or not.
Click to expand...
Click to collapse
Thank you for your advice.
I did ROM flashing by micro-SD and via USB many times before so I know how to do. But it's stuck into bootloader all the time I turn it on (it looks like you press & hold power+down volume button to enter bootloader mode) so I could not do flashing with USB method.
I also downloaded a fresh stockrom SonyEricsson_X1i_firmware_GENERIC_UK_R3AA010 but it still the same all the way.
I remember that it began to get stuck on bootloader few times ago and I simply did softreset until it worked normally. But now there's no way!
I already sent it to SE Service Center and they asked me to pay US$125 to change the whole mainboard!
never said you're a noob.
but yes, you can flash via usb if it's in bootloader. just connect it - pc recognizes it and you can run customruu.exe. (ignore any error-message from activesync/mobile center) i'm doing it this way all the time.
you can reflash stock-/hard-spl this way as well. maybe that would fix things.
i still think you've got a software-problem, something got messed up on your nand. for example, i had a "degenerating" file-system twice, where more and more files would get messed up in windows until the system wasn't bootable anymore (filesize 1.4 gb and such crap). after flash everything was fine and within a day - "dead". only stockrom cured that (task29 didn't). that's why i say concentrate on stockrom - it's your best chance before flashing a custom-rom again.
try everything before paying money for this old phone (replacing the mb surely would fix everything, but...). of course hw-failure is always an option, but rather unlikely in this manner.
caliban2 said:
never said you're a noob.
but yes, you can flash via usb if it's in bootloader. just connect it - pc recognizes it and you can run customruu.exe. (ignore any error-message from activesync/mobile center) i'm doing it this way all the time.
you can reflash stock-/hard-spl this way as well. maybe that would fix things.
i still think you've got a software-problem, something got messed up on your nand. for example, i had a "degenerating" file-system twice, where more and more files would get messed up in windows until the system wasn't bootable anymore (filesize 1.4 gb and such crap). after flash everything was fine and within a day - "dead". only stockrom cured that (task29 didn't). that's why i say concentrate on stockrom - it's your best chance before flashing a custom-rom again.
try everything before paying money for this old phone (replacing the mb surely would fix everything, but...). of course hw-failure is always an option, but rather unlikely in this manner.
Click to expand...
Click to collapse
Finally found the problem.
I powered up X1 with USB cable plug-in and it starts normally
I think the battery is going to die so its low voltage may caused that malfunction.
Thank you for your time.