Related
Hi
I have the newest firmware version installed on my Qtek 9090 (BA_WWE_14000_147_11200_Ship), and I experience a problem again which I had first when I bought my Qtek but was gone after I had installed Radio version 1.08.00:
Once a day I have to reset my Qtek because I can't hear the one I am calling - usually this happens when I call my mobile phone's answer phone. The phone gets connected but I don't hear anything. After a soft reset everything is fine again.
Is this a known issue? Any solutions to it? Ok - I know I can downgrade to 1.08 again but I dont really wanna do that. And yes, I can stop calling my anser phone ....
Anyone knowing what is causing the problem?
Reagrds,
A
I had the same problem with my Qtek 9090 until I stopped use the Bluetooth feature completely. Since then, everything is fine.
tot 1.12 radio has solved the "no sound" issue.
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
keeping_sg said:
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
Click to expand...
Click to collapse
For me, radio 1.12 delivered:
- worse signal reception
- higher battery consumption
- still no sound issue.
flashed twice & still having the bloody "no sound" issue. really give up. i think the next thing to change is the motherboard. sigh.........................
I had never had this issues untill I upgraded my Radio to 1.12 and then I had it 5 times in one day, went back to 1.10, no more issues
Hmm. This is a really 'odd' problem. I didn't originally have this problem with my SX66. Then, it just 'popped up' one day, and I can't seem to get rid of it.
I have tried different ROM versions (currently 1.40), and my radio version is at 1.10.
I have NEVER used radio 1.12, so I know that's not the CAUSE.
We need to compile a list of people with the problem, and see exactly what combination of ROM and Radio they have, as well as the programs they have installed.
if you read the cingular forums, there are a few folks there that say they have had it all along so I am not sure where to start...
umm....... different ppl have different problem. seems like it's a integration issue.
If you go to some HK forums, you will also find a lot of people suffering from this.
To me, I seldom use it as a phone. I only use it to receive emails and website browsing. When I go overseas and I used it as a phone with a BT handsfree (shut down GPRS connection), everything is just fine. I only encountered once with no sound problem when I take away my BT handsfree on a plane....
It's definitely a bug since a long time ago with old and new versions.....
Sad....and disappointed......
Hi all,
I upgraded my phone to the 1.12 radio along with the 1.40 CE ROM and am always resetting due to the "can't hear caller" issue and I never had this problem before.
I'm going to do a hard reset and see if that helps (clear out all the apps and use it for a day or so). If this doesn't work, I shall revert back to the 1.10 as I had no problems with that.
ROM 1.40.00
Radio 1.12.00
EXT ROM 1.13.139 (with Updated CallerID [1.20] and older version of O2 Active [3.0])
This cant hear caller issue, is it cant AT ALL hear caler or caller is so faint I cant hear him.
I ask as sometimes I get calls that are faint however when the caller rings back it fine. Not sure if its crap reseption or the device.
I got O2IIs from UK and had the same "No sound" problem. I have to SR about 5 times daily to sort it out. However, if I turn off Bluetooth (pairing with my Bluetrek G2) then everything's OK.
My ROM version is 1.31.00 WWE, Radio : 1.10.00, ExtROM: 1.31.139 WWE and BT 1.0.0 Build 3500
Had up to BT 3900 but wont help. Gonna up radio to 1.12. Will post the outcome soon.
I've only experience the problem once since the imate 1.40 upgrade.
Now, I must say that I don't use the phone THAT heavily.
I upgrade to 1.40 EX, it seems working fine, still the sound quality is not good enough...
people!
A guy called Derek has posted a possible solution to this problem here! http://forum.xda-developers.com/viewtopic.php?p=118364
It involves removing the Bluetooth for the startup because he believes that even with the bluetooth off, the unit is still trying to connect to a bluetooth headset.
I'm going to remove/unpair my Bluetooth Headset and see if that makes a difference. If anyone else can try this and post results I'm sure this would help loads of people.
Dom
Please confirm this and I will post it to wiki
@xdadom,
It's correct. As I mentioned in my post, when I "turned off" Bluetooth, everything's OK. The way I "turned off" Bluetooth is exactly the same with Derek did in his post, i.e. delete "Run_BTTrayCE" from Windows\StartUp\
However, I still need Bluetooth for my hand-free device. In my opinion, it's rather a trick, not a solution to kill "No sound" problem. Anyway, we can wait the updated BT version from supplier to sort it out.
Have a weird problem and wanted to see if anyone knows a fix.
I have siemens sx66 running wm2003
When using the phone through out the day the phone part of it stops making and recieving calls, even a reset wont fix the issue, after about 5 mins it will reconnect to the network and start to work fine, this happens about 5 times a day. It is not a reception issue since the phone worked fine in my house for the last year, it just started happening.
I upgraded to Helmi AKU3.2 1.3.2b windows mobile 5 and it seems to be more stable. Now when i lose the connection with the network a softreset will allow it to reconnect back to the network. One time when it disconnected i went into device information and for radio rom it said NONE, could this have something to do with the problem, is the phone deleting the radio rom or not seeing it sometimes?
Update:
To try to fix this issue I first smacked it a couple of times, this did nothing to resolve the problem, I then took the entire phone apart to see if there was anything broken, after noticing nothing I smacked the phone a couple of more times. After putting the phone back together the issue is still there.
doing a soft reset when "Radio: NONE" pops up seems to be the only solution.
btw, have you upgraded to Radio 1.15.00?
Hi all.
I'm facing the same issue.
Since I upgraded to Helmi's AKU3.2-1.3.1 I noticed, that the Radio Stack suddenly is lost. You will get no error message. Switching the BA on you will note that the Radio Icon has an "!". Soft resetting will not work. But strange enough, if putting th BA into craddle (or using an USB cable for syncing/charging) and then soft resetting will work, the radio unit is re-enabled again.
I'm now on AKU 3.2-1.3.2 and the issue still exists.
Unfortunately you cannot reproduce this behaviour. Sometimes it happens, but you can be happy and the BA is working for day's without any trouble.
Beside this: the BT stack performance is the worsest I ever met. Just noise, jitter and a very short range using my Headset (Plantronics M2500)
I will try AKU 2.6 this weekend hoping it will be more stable.
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
dr.x
You may want to downgrade from 1.15. There have been several reports in different posts that 1.15 presents several random problems. I installed it for about 2 weeks, but then my phone started making sounds like screetching metal, which led me to believe that I had a loose wire on the speaker or something like that. Then, I remembered about some people complaining about this Radio, so I decided to downgrade. Have not had that problem again. Moreover, I seemed to have weird reception problems in areas where I normally had good signal as well.
All in all, my bets are towards the Radio rather than the BA itself. So, downgrade your Radio and stop hitting your BA before I have to call "BA Services" for domestic violence :wink:
Hope this helps!
dr.x said:
yes upgraded to radio rom 1.15 from 1.13 hoping it would fix the issue. Do you guys think the issue is hardware or software?
Click to expand...
Click to collapse
Hi.
I upgraded to Radio ROM 1.15.00 long time ago und as it worked fine.
As I mentioned before, i faced the problems with disappearing Radio Unit first after I upgraded to AKU 3.2-1.3.1
So I suppose, it will have to do with this ROM Version (AKU 3.2-x.x.x)
Regards
Chuck
Hello everyone,
I have done a ton of google searches and spent about an hour reading through threads of people with similar problems. I have flashed a few roms and different spl/radios etc. Nothing seems to fix the problem.. Nor have I seen anyone in a post had their problem fixed either - they were just criticized and told to search the forums or read a generic faq on flashing radios..
Anyways, after reading all that and trying a few different radios nothing seems to help.
My device, while connected to 3G, can usually make 1 call when it first connects, then each call thereafter will fail with a beep beep beep.
I am running 3.29.Hard spl
Rom Version TPC_V10_MEGA WWE
Radio Version 1.70.18.02
Protocol Version 25.83.40.02W
Has anyone found a successful combination to correct their issues with the 3g network and their tilt? If you have no issues and have the same phone please post your build.
I have flashed from original roms and a few diff radios to no avail .
I really want my damned 3g to work.. and no I dont want to just manually switch to EDGE (which is what I have my phone forced on now).
Thanks in advance.
same here
I have had the same issue. The phone will show H or 3G and you cannot make a call. I have just accepted using the edge system to keep the phone working fine. The only thing you loose is the faster internet speed the phone otherwise works fine. I have assumed that I dropped the phone and something happened to the antenna. I contacted HTC about the issue and they say it is a hardware issue even though I have seen many speak of the same issue. I have the tilt.
I thought I did the same thing until I started searching and see that there are numerous people with the same issue.
I will just be patient and wait until a new winmobile phone comes out with a oversized screen! Hope the next xperia is that
Radio Issue
I had the same problem with that radio. I changed back to the 1.65 radio and everything worked properly again. I hope this helps.
See my sig for what I am running. I have run TPC's roms as well as others and almost every 6.1 compatible radio there is and have never encountered that problem.
Have you tried to go back to stock everything, rom radio and spl to see if that makes the difference ?
Hello all,
I have a Htc Touch Diamond (Rom 2.03.404.3 NLD, Radio 1.11.25.01) that I use with the GSM protocol only (I have 3g disabled for power consumption reasons).
My Diamond has the following problems:
- When I pull the USB/Power cable, sometimes the background illumination stays ON. I am unable to switch it off without performing a soft reset.
- Very often it appears that the phone is simply offline even though it displays full signal strength. It doesn't respond to incoming calls and I can't make any outgoing calls. I have to switch the transmitter OFF and ON again in the Comm Manager application before I can use the phone again.
This is a massive p.i.t.a: Sometimes I have been offline several days without knowing it !!! My phone is an unreliable piece of crap and I'm desperate to make it work more reliably. I don't need too many bells and whistles, I just want it to work. I think it is a power management or radio issue. I therefore installed HardSPL and a newer radio version (1.11.25.01) but the situation has not improved.
I am grateful for a tip on which ROM/Radio could solve these reliability issues!
Thanks in advance,
Arthur
Wow, very strange issues!
First, flash this radio : http://www.megaupload.com/?d=USMNPAS1
Second, flash this ROM with MTTY method : http://forum.xda-developers.com/showthread.php?t=521941 (It's the best ROM with WM6.1/TF3D 2.1, you can't find more stable)
You have to know too that : when you flash a radio, you have to change too a DLL (rilphone.dll) in WM to link up both. Gen.Y ROM includes 1.13 rilphone, so you will more performance & stability with the 1.13 RADIO.
If yours problems continue, it's maybe a hardware problem, or maybe a SIM problem ? (i already seen SIM card who makes a phone do many bugs)
Hop i've been useful
Thanks, I'll try that.
Hi guys, I would love if anyone could help or has had this issue before, I have an htc tilt build of the kaiser, and ever since I flashed it into anything custom, tried a bunch of different radio's and hard spl's and rom versions. I even reverted everything back to the stock settings as best I could. I couldn't find the original wm 6.0 stuff it had so I flashed everything (including the hardspl back to normal and the wm 6.1 update for the kaiser. Either I may be doing something wrong... or I bricked my phone, but since its operating normally aside from the signal, I don't think I bricked it.
Heres essentially what it does, I turn it on, it works for X amount of time, usually a few mins then won't do anything, calls or data, even if it has signal, which seems to get weaker or no signal at all after a few minuites.
Now an odd thing is, if I tether the internet to my laptop with internet sharing, alot of the time the connection runs stable for several hours if I tether it within a few mins of a bootup.
I'm sorry it was so wordy, I just figured any information could help out, I'd really appreciate it, and not having to restart my phone alot the time would be great
Currently I'm running stylus black's latest full build (5.0?) on hard spl 3.29 and the radio 1.70.19.09. the stuff recommended on the thread.
Try a different Radio the recommended just means tested by chef and works doesn't mean it will work for all people since so many variables involved in choosing radio.
Hi, was your issue resolved using a different radio.. My friend has signal problem as well. It only happens when the keyboard is open.. is this a hardware realated problem?