Related
I've had my wizard for a year and it's been great however within the last 2 weeks, the stylus started to get lose and now it won't even stay in; I've already had others pick up and return my stylus to me.
Looking at the warranty card, it says there's a 2 year limited warranty while the O2 contract says 1 year. My wizard is a G3 unit (no .0001 at the end and in the info it mentions G3 somewhere) and it's sim unlocked (not sure if it's CID unlocked but it should be) and it can o/c to 260MHz stable but at 275 ... tried once it's fairly unstable.
My question is this: with g3 units apparently being the easier one to unlock and sought after (correct me if I'mwrong here), should I fix it myself or call up O2 (is the warranty period really 2 years to begin with anyway) and get them to replace it? My wizard was also just dropped by a relative (1 year and not a scratch till he drops it on the kitchen floor) and now has a few scratch marks on one side (although I want to give it a paint job, I'm a little uncertain if I should...grab and do a spare body perhaps? besides I have no paint skills).
I do also have the intention of grabbing another XDA or equivalent device later down the line but also going WM6 on the wizard before that. What should I do?
fix it yourself, not worth the extra hassle if you get a g4.
and it will be quicker, do you want to be without it while it's getting fixed for two weeks or more?
BTW it is CID locked. but o2 don't seem to bother sim locking.
http://www.pdagold.com/articles/detail.asp?a=274
Truly...fear the G4?
So the G4 units are truly a pain to deal with? I'm just a little hesitant to rip open my mobile but...if I get a G4 unit.... I'm going to be in trouble.
I should have a torx set here but do you know if the warranty itself is for 2 years or 1 year? If the warranty is still on, where are these "warranty seals"?
to be honest, I don't really know anything about g4s. but I do know that every rom thread has someone asking if it'll work and/or that they have to strip out the ipl and spl etc (though lots of new custom roms come without those now).
I think you have to, must, pay to cid unlock.
and there is a dedicated g4 thread, which can't be a good sign
however, I just did the stylus fix and now the volume slider doesn't work, trying to fix at this moment.
read the g4 thread
also bear in mind if your current model supports 4gb sd cards you may get one that doesn't, or the other way round
If you don't want to take your device apart, there is a simpler option you could try...
Cut approx 1 inch square from a plastic carrier bag
Place this over the end of the stylus and push the stylus + plastic into the hole.
That should be it - no more dropped stylus
I used this "fix" about a year ago and still working beautifully
I wrapped a small strip of Diamond Sellotape (the clear invisible stuff) round my stylus, thus making it slightly thicker. This stopped it from dropping out all the time!
AsGF2MX said:
So the G4 units are truly a pain to deal with? I'm just a little hesitant to rip open my mobile but...if I get a G4 unit.... I'm going to be in trouble.
I should have a torx set here but do you know if the warranty itself is for 2 years or 1 year? If the warranty is still on, where are these "warranty seals"?
Click to expand...
Click to collapse
It is an easy fix, I was hesitant also but in the end I just opened it up and sorted it out. Not a big deal at all.
Stripping a sharp 1080p flatpanel to turn into a home brew front projection HDTV unit is much more stressful.
Hmm...void warantee I guess...sooner or later
Stripping it isn't really something I'm too hesitant about (save for the warranty). I might try the paper bag trick for now but I might rebuild it if anyone knows where I can get custom fascias...
AsGF2MX said:
Stripping it isn't really something I'm too hesitant about (save for the warranty). I might try the paper bag trick for now but I might rebuild it if anyone knows where I can get custom fascias...
Click to expand...
Click to collapse
you mean like this?
http://cgi.ebay.com/100-ORIGINAL-02...sPageNameZWD2VQQcmdZViewItem#ebayphotohosting
Nice and pricey
Nice but where's the D pad and softkeys? Also are there any pre-painted ones...otherwise it looks like a DiY job for me and I've never done paint jobs before. All things considered, I might just get a new fascia and fit it on as sold and try and get a skin or something until I can paint the old fascia.
I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.
DBordello said:
I was carrying a heavy box today against my body, I must have jammed a corner into my tilt, because afterwards the screen is all white with a black spot. I am pretty sure it is a cracked LCD.
1. Anyone have any advice on getting service through ATT? I heard they had a 30 day no questions asked policy. It is obviously a cracked screen, pretty sure they wouldn't deal with that.
2. It was paid for on a visa, do they have something I can take advantage of?
3. Where is a good/cheap place to buy the replacement parts? I am not too worried about digging in and fixing it myself.
4. What are my options for paying someone to fix it? HTC, ATT, or otherwise?
I really appreciate your help, I am terribly aggravated with myself for break it. Just trying to minimized the damage right now.
Click to expand...
Click to collapse
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Good luck, I had the same luck as well, wasnt even a week of having my tilt and it fell in a bunch of clothes and had a small crack the slowly did the same results of your screen, I had to go through hoops to get a replacement from AT&T, not my most favorite people to say the least.. :-\ Just got my replacement yesterday as the phone died Monday.
petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
Ya, they will charge you with either buying a refurb phone, let you get a junky replacement phone if you cant afford it, or 3, raise hell with 611, and in the local AT&T athorized store you bought it from.
I've seen a few replacement screens on ebay if you have the guts to take your phone apart you could try one of those.
petard said:
1. They will charge you for breaking it.
2. No, you can only dispute a charge if they didn't hold up their end of the bargain, you broke the phone, its your problem now.
3. I dont know
4. I believe they will charge a lot, but still less than a whole new phone. See how much it costs and then also see how much you can get on eBay for your broken one and how much a new one will cost you.
Click to expand...
Click to collapse
regarding 2, I heard that visa offers some sort of protection plan for items purchased with it. I wasn't planning on back charging it.
I was unable to find any screens on ebay, but I'll keep looking. I found a replacement service for $170.
Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343
http://www.pocketpctechs.com/main~unit~ATT_Tilt-974~area~repairs~action~updateunit.htm
LCD and touchscreen replacement service.
A7LAS said:
Here is a link to a screen that i found on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=270204138123&Category=41343
Click to expand...
Click to collapse
That doesn't look like too bad of an option. I need to read about what is involved to install it. I think i have seen some posts of people have issues even after replacing the screen (incompatability?).
Also, that is in Hong Kong, yuck. Perhaps I can find one that is in the US and includes the tools required.
Thanks for pointing me in the right direction though.
I just purchased this screen:
http://cgi.ebay.com/ws/eBayISAPI.dl...em=270204431330&_trksid=p3984.cTODAY.m238.lVI
Does anybody forsee any issues replacing it? I found directions online.
I actually changed my mind about repairing the screen myself after reading the directions. It seems risky that I'd break it myself.
1. Do you recommend I get a 3rd party to repair it? Pocket pc techs is an option ($170)
2. I called HTC today, they said screen replacement starts at $193. I am guessing that it is worth the extra $20 to have it done by HTC, perhaps it won't void the (rest) of the warranty?
-Dan
As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.
l3urton32 said:
As this is my first post I would just first like to say thank you to everyone who has contributed to this forum, without it this new smart phone user/AT&T subscriber wouldn't have been able to figure anything out.
Long story short: I just bought a new Tilt like three weeks ago and the LCD is already cracked. AT&T doesn't offer insurance on this phone and I am not entirely sure about HTC's manufacturers warranty. I checked across the forums and found some good information regarding replacing broken Tilt LCD screens, it all just seems fairly old. What I am wondering is what is the cheapest, easiest way to fix the LCD on the Tilt? Right now the cheapest I can find the LCD/Touchscreen combo with the right tools is $69.99 plus $12.99 S+H. Is this the best bet? Any other options I haven't thought of yet?
Also, I can't seem to find detailed picture instructions regarding the LCD swap anywhere on the forum? So where are the best directions for this online?
Now, time for a little rant. How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month. The least they could offer their highest paying customers is a chance for insurance. By not offering insurance to their customers AT&T is basically saying "Piss off, oh, and make sure you pay your bill on time!" with a permanent smile on their face as they walk to the bank with our money. I'm sick of phone companies saying "I'm sorry, theres nothing I can do for you" to the customers that finance their paychecks, vacations, and replacement trophy wives boob jobs. I understand it's a service based industry and everyone wants their service, giving them the ultimate upper hand in the situation. But let's start thinking a little bit more with our heads and a little less with our wallets. It's time for these places to realize how ridiculous they are sometimes.
Apologize for the missive their, but man did it feel good.
Click to expand...
Click to collapse
Mike Channon has links to Disassembly guides. Try a search for "Kaiser Disassembly Guide." My expert opinion, remember advise it worth waht you pay for it , is that the $70 is a good deal.
EDIT: I'm in a good mood. Searched for you today. Kaiser Disassembly Guides.
And s response to your rant. See this is why Mobile Phone Companies have the WORSE customer service rating of ANY business.
yea I cracked my screen as well about a month after having it.. I ended up buying a screen replacement for 115 off of ebay...
But now be careful... When i broke my screen, I thought that was the only damage the phone took... well the impact was right above where the sim tray is... and it damaged it as well.. my phone wasn't able to read sim cards anymore after replacing the screen... So I did a bold move, and told AT&T warranty support that my phone all of a sudden didnt read my card anymore.. i sent it back to them, and they sent me a replacement...
they could have charged me $400 for sending them a broken "out-of-warranty" item but i lucked out
l3urton32 said:
..How the hell does AT&T not offer insurance for a phone that retails for over $300 brand new? Let's get serious here, it's an expensive piece of gadgetry that I happen to pay a lot of money for to use every month...
Click to expand...
Click to collapse
That is exactly why they don't provide insurance for it. I asked a friend who works for them and he said that was the main reason. However if you live in dc metropolitan area there is a company called "Simply wireless" that offers insurance for any kind of mobile device and its 60 or 70 bucks upfront one time and insurance is good until something happens to device. Didn't get it myself but could be worth looking into.
p.s. i was also going to refer you to micheal but i Jimmy's already done it
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
Thanks
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
I used to work for Simply Wireless, and Mobile Solutions.. both a crooks.. dont buy from them, and definietly dont buy their insurance...
even though they are trying to clean their act up, their are 100% sales driven and dont give a f*ck bout their customer... trust me like i said, i worked for them...
if ur in the DC metro area, check out Wireless Jungle, they are located in Burke, Manassas, Herndon, and other parts of NoVA, they are excellent imo
l3urton32 said:
Thanks to both of you already. Jimmy thanks for posting those directions, they look a little more intense than I thought but I don't think I'll have a problem replacing it myself. the $70 is way cheaper than the $170 from pocketpctechs.com
How would I make sure everything else is working fine on my phone? It's still syncing fine with my laptop and sends/receives calls, so I imagine its still fine. Is there a SIM access point through WMDC? Just to check that?
Also, anyone know any other ways to possibly get around this warranty here? The screen broke this morning, and I'm still not entirely sure how it happened. I had left my wall charger back home and only had my usb plug to charge my phone from. I woke up to the screen cracked and my phone being really really hot. The phone was at the foot of my bed, so I am not ruling anything out like me accidentally pushing in the screen, but has there ever been issues with the Kaiser's over heating and popping their LCD screen?
Click to expand...
Click to collapse
honestly i doubt heat caused it... looking at my phone, i have enough room to stick my fingernail under the casing sourrounding the screen, so there is alittle room to move in case heat does expand the internals. My phone has gotten pretty damn hot before, to the point where i couldnt hold it (forgot it in the car with wifi bt and gps on... in 105F temp) and it was still fine....
I dont condone this... but when i broke my screen, i was extreemly careful in replacing it, and made sure not to add any additional scratches... once i was done, the phone looked like it did on day 1... so when i sent it back to AT&T there was no way they could tell it had been cracked open...
if ur phone still rings, and u can answer the calls, u should be ok...
I actually had the insurance prior to switching over to the tilt in October. In December my screen cracked and I called them and they said that since I was a long standing customer, they would replace it. they sent me a refurbished phone in 2 days.
I broke the scren again in February and this time I did not call immediately. about a month later I went past the store and told him the situation and he said to call again. I did and they sent me another one. they canceled my policy because I had two claims in one year. but they told me that I could pick it up again in a year.
Moral: always ask...you never know!
Awesome, more good info from everyone. I'm from the Rochester, NY area. Any idea if theres some sort of place that will insure any branded phones in my area? Google is failing me here. Also, do these places have to check your phone before they insure it? If theres some way I can get around that and put insurance on my phone I would just wait like a week and send it in...
yea if they "forget" to remove the insurance plan... or if u ask a stupid rep to add it, and they do... ur golden, and they will replace ur phone... I'm still grandfathered in with my insruance
btw kendall sent u a pm
so maybe AT&T is getting a little smarter. I called and got 4 different customer service reps and all of them told me it was ineligible...no luck with the bull**** approach. HTC USA said no go on everything too... I am getting a little fed up here. I have had this phone for only 3 weeks and everywhere I go everybody pretty much just dismisses me. My favorite dialog of the day came with one AT&T rep who was pissed off at more than just me trying to get an answer from her. And this is after she already told me the Tilt was ineligible for insurance
Me: So basically what your trying to say is that if I break my phone I'm pretty much screwed
AT&T Lady: umm... well. You can apply to get insurance on your phone and than you would be covered.
Me: you just told me I can't put insurance on my phone at all and you can't fix it for me
AT&T Lady: Wait. You can't put insurance on this? Hang on. (here she put me on hold to, what I assume at least, check her facts again) Alright Mr. Davis we can't insure your phone. Can I offer you a replacement Tilt at full retail price?
Let's get it it together AT&T, support the customers that pay your bills. We don't get the corporate discounts you get so it's a little ridiculous having to deal with all this crap.
Suggestion here...add an LCD Replacement walk-through to the Kaiser specific Wiki...or perhaps a whole section concerning DIY repairs and mods...Just something concise so it's a little easier to find. Thanks again to everyone though.
Lcd Screen
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.
belize2004 said:
the cheapest i found was $65 for the lcd and $8 Shipping from. WWW.HTCLCD.COM comes with the tools to replace it.
Good instructions also on their website.
Click to expand...
Click to collapse
Thanks a lot! I'm ordering now and will see how it all works out.
I found a new place that will replace the screen with quick turnaround for $125
www.northbayelectronics.com
I am sending mine today!
well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124
that auction appears to just be for the touch screen overlay, not the LCD screen.
ericmcintire said:
well my screen cracked... anyone think of a reason this replacement screen won't work? I bought it just now, $14, no big deal if it isn't what I need... but can anyone see how this might not be what I need?
http://cgi.ebay.com/TOUCH-SCREEN-FO...NameZWD4VQQcmdZViewItemQQ_trksidZp1638Q2em124
Click to expand...
Click to collapse
I'm trying it. Please see:
http://forum.xda-developers.com/showthread.php?t=337102&page=10
and the page after. Should be interesting.
i ordered from htclcd.com (redirects to blackberry8100parts.com) on tuesday afternoon; i just received it from DHL. came in two separate boxes, one was the screen and tool, the other was another tool (different sizes). price was 68.80 including shipping from omaha, ne to knoxville, tn. regrettably i left the tilt at home so i can't do the replacement in the office today; i'll update when i've done the replacement (successfull or otherwise...) this evening or tomorrow morning. i'll try to remember to take some pics.
take off the four outer screws, and GENTLY GENTLY GENTLY pry the outer plastic bezel/frame off. you have to remove a philips head screw inside and to the left of the ear-peice speaker (as you look at the board from the back of the ear-peice (i.e. the inside of the bezel); i did not put this screw back on when re-assembling, i did pry the ear-piece connectors up a little to make sure they had enough stroke to make contact. you will need to remove GENTLY the adhesive that holds the sim-carrier to the back of the screen. once the parts are apart you can see the plug to remove the screen from the back of the button pad. reverse to reassemble. you do not have remove any peices from the main body or remove the screen from the main body IF you are only replacing the touch screen. i'll have my pics uploaded some time tomorrow. FYI, htclcd.com did not include the "plastic tool" that you are to use to pry the bezel off with but judicious use of a micro-driver and a guitar pick got the job done; for 20$US less than the competition and 2 day delivery, i am very happy with my purchase from them (htclcd.com = blackberry8100parts.com).
cheers all!
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
wshader said:
So one of my friends at work had an att tilt. However his son dropped it out of his pants pocket and the screen popped off. Screen is still in one piece however completly seperated from the tilt mechanism and the ribbon cable is missing. So I told him instead of throwing it away (cause att does not offer insurance) to give it to me and I'd see what I can do (Gonna unlock it and use it as an upgrade for my wing ).
I've read some of the hardware manuals and can already see I'll need parts to fix it. But I have no ideas what ones. Or if it's even worth it to fix. I mean its basically a free tilt minus any repair costs. Any help?
Click to expand...
Click to collapse
Check thi site, there is a manual how to dismantle kaiser. Could be helpful:
http://michael-channon.spaces.live....smantling+%2f+Disassembling+Guides+HTC%2fETEN
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing. And alot of steps missing to get it this way.
wshader said:
Thank you, however thats actually the repair manual I looked at. However while looking for parts I have yet to find the ribbon cable that connects to the display.
This is basically what I have except the ribbon cable is missing.
Click to expand...
Click to collapse
OMG, that had to hurt.
Yeah, kid was playing basketball and fell out of his pocket. I guess the kid has broke 4 phones this month... curve, tilt, 2 pantec duos. Told my friend to get him a $20 go-phone now lol. And use the savings to get me a tilt
I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
wshader said:
Yeah, and I dont know what kind of damage besides the physical the drop may have caused. Phone was not on at the time so that may have helped it (I hope)
Click to expand...
Click to collapse
I hope u repair it. Wish u luck.
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
I suggest trying to find one broken on ebay and using the 2 you have to make one working phone. Even a broken Tilt can run for $200 on ebay though.
Anyone notice that case has already been replaced at some stage as it has a camera hole (not standard for Tilts) a keyboard without the white part and no logo. Perhaps the replacement was weaker than the original one. If the O/P searches the forum here for LCD Screen replacements there's loads of links to different companies supplying parts for Kaiser variants. I have no experience using any of them though so cant suggest which ones are best.
@Planet Neo
Yeah I was thinking that but was hoping it wouldn't come to that. Would suck to spend $200 for parts just to find the motherboard is broke or something to that effect. Was hoping someone knew of a place to buy a new cable or had one to sell. Also was hoping someone with some experience could let me know if they think I'd need a new tilt assembly.
@Flying Kiwi
Lol, I used a picture from kaiser disassembly guide to show what i was referring to. It has the standard tilt case. I'll be taking pictures of what I have as soon as I have the phone in my possession.
Okay I assume that its going to be very hard to get the ribbon and you're going to need housing. I believe that it will be the same as making a new tilt, because the screen is as good as dead without the ribbon so all you could do is get new housing and a new screen and it should rack up about $150-200. Which in my opinion is much easier and faster and better than frustrating on getting a ribbon.
Just my 2 cents.
Kraize
Planetneo said:
Without actually looking at it, its hard to say what exactly you need. But you for sure need a new flex cable. Unfortunately that is the hardest part to find. At least here in the US. I usually buy broken phones from people who don't want to pay for a repair. Then I use the parts from them. You can get a new housing easily enough if you need it but the flex cable will be your biggest hurdle.
Click to expand...
Click to collapse
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Mysterious Stranger said:
I'm sure you'll think I'm busting your balls / stalking you but hard to find? Hell no! Expensive, maybe ( $100) but hard to find? I think not. Good job you're not charging people for you expert advice else they'd be wanting refunds....how long did you say you'd been doing this for?
http://search.ebay.com/search/search.dll?from=R40&_trksid=m37&satitle=tytn+flex&category0=
You need a TYTN II flex. There are many other suppliers and if you go direct they may be a bit cheaper. google is your friend....
To check the board - connect to a windoze computer with a mini USB cable and power up or press the soft reset button to boot it - it should ident and install then try to sync. It should boot fine even with no LCD if it's OK assuming the battery still holds some charge.
A full housing will run you about $60. Some sellers have just front panels for about $40 though I'm unsure if these have the pivot.
M.S
Click to expand...
Click to collapse
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Planetneo said:
Man, MS you really need to get off my nuts. It's getting creepy. I said in my post hard to find at least in the US. And the link you gave was for a seller in China. One more word of advice for the OP, Make sure this part actually works for the AT&T Tilt variant. I had a customer buy a Flex cable for the HTC Herald thinking it would work for the T-Mobile Wing but due to the modified button layout of the Wing it did not fit correctly. Much like this person HERE experienced.
Click to expand...
Click to collapse
These things are made in Shenzhen so where you think the parts come from?
Stop talking &*%(* and I'll stop correcting your posts Instead of saying something is a fact say it's your opinion. It's not a 'rare' part - and they ship WORLDWIDE. It's not as if he'll get one from a local mom and pop store - it's gonna be mail order wherever you get it from and looking at the seller's feedback is a good judge - all my parts come from China - so why pay a middleman such as yourself extra $ just so it has a US stamp on the package?
Someone needs to act as quality control on your posts and it looks like it's gonna have to be me if you keep posting [email protected]
M.S
I need to get a nexus one handled thru warranty, but HTC says basically if anything is wrong they'll charge for a new phone. I've never dropped it in water but I just want to make sure just in case like if some steam got in or something, I really don't want to pay $500 for a refurbished phone or something like that.
Has anyone gotten a N1 replaced thru HTC?
also, where is the water indicator thing on the phone? Can it be seen if you take the cover off?
here:
http://www.dropbox.com/gallery/6436943/1/liquiddamage?h=5096a4
I am not sure if there are any others.
The picture is of the back of my phone, at the very bottom with the rear lower cover off. Picture courtesy of HTC
On mine, there is also a water indicator under the battery terminal leads. Remove the battery, and look just below the connectors. You'll see a white sticker. or red if it's gotten wet.
Also note, that these stickers do not change color in humidity, they must touch standing water, you would need nearly 100% humidity + 100% condensation for it to change. Which under normal weather conditions (even a shower's steam) it would be impossible for it to change... And if you did get it to change from humidity, it's beyond the tolerance of the device and has voided the warranty.
Just as you can't put it in a 600 degree oven for an hour and say "i don't know what happened, it just melted in my hand" and expect a warranty replacement, or repair.
they have set standards for what the device can handle, certain number of G forces, high and low temperature, and humidity. any one of these items can void your warranty. Only a few can they really tell if it happened (water is most common).
If you think you're prone to doing these kinds of things, damaging electronic devices. You can buy insurance from some 3rd party companies, who'll replace the device, in the event it's stops working, damaged, or even stolen. Granted you're going to end up paying into the insurance for more than the phone's worth. But you'll get a brand new phone, if your friend steals it. (But they have ways of finding out if it's turned on, and they can track these things, insurance fraud is a crime, and they aren't stupid about it.) ;-)
In addition to the two sports mentioned above, my battery (stock) also has a water indicator strip on the side of it.
thanks guys, huge help.
@ mellow cat, I don't want to open the device up for fear of really voiding my warranty, I guess there's no way to see that without taking it apart eh?
@ next two dudes, thx, my strip is still white, so that pretty much means the inside is going to be white as well and I should be safe for a warranty claim right?
The water strips show two points where the water could enter. Near the battery is for the headphone jack. And the bottom is the USB port. If you did drop it in a 1/4 cup of beer (like a friend of mine with his iphone) but only went half way it'll show on the bottom.
If you're worried about steam then the battery one should be enough to ease your concern.
But any other damage like bumps and bruises on the phone is enough for them to deny your warranty claim. (Also assuming you bought new not a refurbished. Refurbs will be denied because they don't have stock serial numbers. I've worked at netgear doing support claims like that... so I know how those kinds of things work.)
Sent from my Nexus One using Tapatalk
well ****.
Here's what I'm dealing with:
The phone is my girlfriend's. I bought it brand new from Google for her. About 2 months later she left on the top of her car and drove off, it fell near the freeway. Brick.
Sent it to Asurion and paid the deductible, obviously they sent a refurb.
Fast forward 2 weeks ago, the power button would work 1 out of 3 times pressing it, suddenly it stopped working altogether, so that would be a manufacture error. The phone has normal nicks on it, but no big dents or anything that it looks like it was dropped (to me). The battery indicator is white, although she says she had it in the bathroom while showering, not in the shower, but in the bathroom.
Called HTC, they said they'd replace it on warranty for free provided it didn't show user ****-ups. They are making me put $500 on a credit card in case they have to charge my ass.
So I am really worried they are going to "find" something wrong with it and charge me. She really loves this phone and can't have another one because she has to have that lighted track ball. I just want the ****ing power button fixed, that is it, nothing else. Never rooted, never anything.
This thing is pissing me off, why so much drama just to fix something it would take their tech guy like 10 minutes? It's still within a year of original purchase.
Any thoughts or advice?
orangekid said:
Sent it to Asurion and paid the deductible, obviously they sent a refurb.
Called HTC, they said they'd replace it on warranty for free provided it didn't show user ****-ups. They are making me put $500 on a credit card in case they have to charge my ass.
So I am really worried they are going to "find" something wrong with it and charge me.
This thing is pissing me off, why so much drama just to fix something it would take their tech guy like 10 minutes? It's still within a year of original purchase.
Any thoughts or advice?
Click to expand...
Click to collapse
My first question is, what about the insurance co? Have you asked them about a replacement since they sent you the first replacement?
I've dealt with a similar situation with a laptop. I ended up suing gateway for my laptop back.
So HTC will find that it's a refurb. They will charge you for the repair. This should be a reasonable cost for repair ($60-160 no more than that).
HTC should only be asking for $500 hold if they are sending you a replacement, and that they don't want to be shortchanged in the event you don't send yours back.
They may still charge you for repairs, they may not.
But the $500 should be released either way.
If they do not do it this way, go file a civil lawsuit for the $500 damages. They won't fight it, and it'll cost you about $35.
If they do fight, then you've got your ducks in a row (you'll win), you should have your replacement anyway. Just go with it.
This is from personal experience, and I hope it goes smoothly.
They said they would replace it for free even though I told them it was a refurb via Asurion because the original purchase date is less than a year, but if they find that I ****ed it up in any way (e.g. water damage) they'd charge the $500, So I can pay $80 to fix it like you say or attempt to get the free replacement (they already know it's a refurb) chancing they charge me $500.
$160 still seems like too much money to fix something that is a common failure on their end while it's still under warranty.
I can get a replacement refurb thru Asurion for $130 so paying $160 seems ludicrous (I know you said they may charge only $60 but what are the odds)
orangekid said:
I can get a replacement refurb thru Asurion for $130 so paying $160 seems ludicrous (I know you said they may charge only $60 but what are the odds)
Click to expand...
Click to collapse
So, Are you a gambling man?
Your options:
1) pay 130$, get another refurb.
2) take a chance, that that phone has never seen water. And are you willing to put $500 on the poker table for that?
Also, if you enjoy legal battles and can spare the $500 for a few months, if they do charge you the $500, then you can sue the insurance co for sending you a bad refurb, in damages of $500... since you know it's never seen water since you've had it. (it's not your fault its water stickers were set off, you shouldn't have to pay the $500. I'm not one for sue-ing everyone, but in this case, it's going to hurt you in $500 if you didn't) But thats a last ditch effort.
flibbertigibbet007 said:
So, Are you a gambling man?
Your options:
1) pay 130$, get another refurb.
2) take a chance, that that phone has never seen water. And are you willing to put $500 on the poker table for that?
Also, if you enjoy legal battles and can spare the $500 for a few months, if they do charge you the $500, then you can sue the insurance co for sending you a bad refurb, in damages of $500... since you know it's never seen water since you've had it. (it's not your fault its water stickers were set off, you shouldn't have to pay the $500. I'm not one for sue-ing everyone, but in this case, it's going to hurt you in $500 if you didn't) But thats a last ditch effort.
Click to expand...
Click to collapse
well I do play hold 'em a lot with friends over bbq and beers but that's a different story.
so maybe I'll just chance the $500 and send it in for warranty then if HTC pulls a fast one I'd do a civil suit on Asurion for $500 for sending me a jacked up phone?
maybe, I mean this whole thing sucks and $130 is insane for the damn power button.
ugh
Hey you've got more guts than I do. But you're probably on a good bet. Although I don't gamble much.
Please let me know how it ends up. I'd love to hear a good ending.
Sent from my Nexus One using Tapatalk
This thread made me really laugh. I was afraid of the $529 on credit collateral for the repair, but after going through it EIGHT TIMES (yes EIGHT) I can assure you they don't check the phone that thoroughly. As long as you didn't swim with the phone, everything's covered. Make sure your screen is not HEAVILY SCRATCHED or CRACKED, this can cause them to get ancy. The biggest problem is them sending you a lemon, and I've gotten 7 of them so far, ranging from dust under screen to power button to LCD Flicker and coloration/dead pixels. I swear its like a grab bag...
Dnlsmy I'm talking of past experience with other warranty claims and from my experience working at netgear. I don't know how lenient HTC is about their warranty. But from what you say you sound pleased other than the refurbished units you got back...
All I can say is good luck.
Sent from my Nexus One using Tapatalk
UPDATE:
ok so I ended up just sending the device to HTC, go the new unit last tuesday. Girlfriend couldn't be more pleased, noticed the difference in the button right away.
HTC didn't charge me for a new phone, so guess they didn't find anything wrong with it, glad she never let me root it, lol.
Looks like this will turn out a happy ending, thx to everyone for chiming in, I'm sure I'll be back to these forums for a Nexus related question at some point
now if you'll excuse me there's a new CM7 ROM on my HD2 that needs flashing