Database Develop

unlocking sx56 using xda manipulator??????

can i use the XDA Manipulator for unlocking the SID my SX-56 using the cradle with a a usb connection. I know it says serial cable but by using the cradle and usb will it make a difference????
thanks

No, it won´t work through usb-connection...
You have to use a serial cable, or you can try the xdaunlock tool.
HTH
Stefan

LumpiStefan said:
No, it won´t work through usb-connection...
You have to use a serial cable, or you can try the xdaunlock tool.
HTH
Stefan
Click to expand...
Click to collapse
I follwed the directions on this website on how to use xda unlock however when i run it on my pda it says "error getting unlock code"
???PLEASE HELP???!!!

sx56 unlocking...
How can i unlock my SX56??? i have tried the XDAunlock however it gives an error which says "error getting unlock code" ...what does that mean?
I also read about installing a new rom...however i dont want any extra programs or software...i just want to unlock the pda phone.
ROM Version: A.20.17
Radio Version: A.20.10
Can someone please help me ive been reading all the forums and posts.........but no luck yet...

Re: sx56 unlocking...
golu said:
How can i unlock my SX56??? i have tried the XDAunlock however it gives an error which says "error getting unlock code" ...what does that mean?
Click to expand...
Click to collapse
That means that the program do not work. It requires the wmodem application for unlocking....
golu said:
I also read about installing a new rom...however i dont want any extra programs or software...i just want to unlock the pda phone.
Click to expand...
Click to collapse
You can also use the plain 3.17.03 ROM without any additonal software. Or you can use the Special Edition ROm for unlocking and then flash back to your old Rom version....
HTH
Stefan
PS: Pleas do not post as often the same question. That make no sense...

how can i get the wmodem application so that i can use xda unlock?
If i install a new rom version (3.17.03) will that erase all my software currently on the walllaby... Also with a new rom does that affect the siganl connection of the phone..???
Thanks Stefan

Re: sx56 unlocking...
LumpiStefan said:
golu said:
How can i unlock my SX56??? i have tried the XDAunlock however it gives an error which says "error getting unlock code" ...what does that mean?
Click to expand...
Click to collapse
That means that the program do not work. It requires the wmodem application for unlocking....
golu said:
I also read about installing a new rom...however i dont want any extra programs or software...i just want to unlock the pda phone.
Click to expand...
Click to collapse
You can also use the plain 3.17.03 ROM without any additonal software. Or you can use the Special Edition ROm for unlocking and then flash back to your old Rom version....
HTH
Stefan
PS: Pleas do not post as often the same question. That make no sense...
Click to expand...
Click to collapse
I went on to the rom kitchen website....
http://lumpistefan.dyndns.org/
And it looked very cool...so many options avaliable...... howeverr would the "3.17.03 ENG O2-Euro" Rom work in Canada?? eventhough its not europe???
are there any other bad things that could happen when i install a custom rom overwriting the A.20.17 version?????
also what is eZwap2 , ezWAP (does it need to be included when cooking your own rom) and action frramework?
ANother thing XDAunlock says that it will only work if i have a wireless modem feature in the rom kitchen...however i dont. So how will installing this new rom unlock my phone???
Thanks

Did unlocking for SX56 work for Canada?
Did unlocking for SX56 work for Canada?

Re: Did unlocking for SX56 work for Canada?
Sanjiv said:
Did unlocking for SX56 work for Canada?
Click to expand...
Click to collapse
Yes

Thank you!

how do install the exe rom onto the xda.
I also want to back up the current rom..

Help.. I am a little confused.

I have a K-Jam with rom version 2.16.9.104 (Norwegian Rom)
Is it possible for me to get a English rom?
:shock:
-alex :shock:

Yes, just update your ROM with one available in whatever language you want.

ftp://xda:[email protected]/Wizard/Roms/
choose one here, make sure your sim is unlocked.

SIM lock isn't important for switching Rom, CID unlock is.

kyphur said:
SIM lock isn't important for switching Rom, CID unlock is.
Click to expand...
Click to collapse
I have tryed to CID unlock the device but it seems that it does not manage to do it.
It comes up with an error that it si not able to copy cidunlocked.bin but then it says that the phone is unlocked. but when i tryed to uppgrade the rom it says that it is not posible because of wrong vedner id.
I have tryed using aWizard-V1_3beta2 and Lokiwiz02b.

Downgrade to a 1.x Rom then CID unlock.

software says phone is unlocked but it is not

The software says phone is unlocked however when I go to out the new sim card in a screen is prompted asking for the unlocking code, I have a cingular 8125 and am trying to use get it unlocked to use my t-mobile card.

- What unlocksoftware?
- What Rom?

shane1977 said:
The software says phone is unlocked however when I go to out the new sim card in a screen is prompted asking for the unlocking code, I have a cingular 8125 and am trying to use get it unlocked to use my t-mobile card.
Click to expand...
Click to collapse
That's 'cos you've probably used lokiwiz 0.2b with a rom version 2.xx phone.
Lokiwiz 0.2b doesn't work with roms 2.xx but, since it's a batch (.BAT) file, it will always reports success even when it hasn't actually succeeded.
Use lokiwiz 0.3a instead.
bye

2.3beta
molski said:
- What unlocksoftware?
- What Rom?
Click to expand...
Click to collapse
The software id the awizard 1_3beta
OS 2.25.11.1

Re: 2.3beta
shane1977 said:
molski said:
- What unlocksoftware?
- What Rom?
Click to expand...
Click to collapse
The software id the awizard 1_3beta
OS 2.25.11.1
Click to expand...
Click to collapse
awizard 1_3beta is the same of lokiwiz 0.2b. Use lokiwiz 0.3a!
bye

Installed wm6.. but phone is still wm5

I recently followed all steps to upgrade my phone wizard a9100 to wm6. It installed w/out problem. But when it boots it is still wm5. I downloaded various wm6 packages and it ends up the same way. I don't know what the problem is. The phone is a generic Qtek phone, not t-mobile or any other. Thankss!

Be sure that the phone is CID unlocked. If it's not and you keep on flashing you might kill the phone or criple it by not booting again into OS.
cheers

Thanks
mestrini said:
Be sure that the phone is CID unlocked. If it's not and you keep on flashing you might kill the phone or criple it by not booting again into OS.
cheers
Click to expand...
Click to collapse
Ok thankss. I'll check if it CID unlocked. Thanks for the response. So if I CID unlock it , it supposed to work correctly right?

yes

Thankkk u!
That seemed to be the problem.. Thank u lotz!!

the same problem with me too

micro-me said:
the same problem with me too
Click to expand...
Click to collapse
If its CID locked it won't upgrade,first CID unlock the phone.If its a G3 follow this guide :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
But if its G4 read the SoftSPL or HardSPL method in the G4 forum posted as stickies.

Please verify my Supercid installation.

I just installed the Supercid and I wanted to make sure I have it installed properly. where can I check it? the reason I am asking, because instruction stated I should see the unlockcode on your monitor and your Kaiser is being restarted automatically. I do not see the unlockcode and device did not restart, but it that give me this message.
=== Kaiser SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio
Press Enter to exit
Please advise. Thanks in advance
Anchim

anchim said:
I just installed the Supercid and I wanted to make sure I have it installed properly. where can I check it? the reason I am asking, because instruction stated I should see the unlockcode on your monitor and your Kaiser is being restarted automatically. I do not see the unlockcode and device did not restart, but it that give me this message.
=== Kaiser SuperCID and Security Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
[] Done, your device should now be superCID and Security Unlocked
[] Your device is unlocked and you can change anything anytime
[] Don't forget to flash your original radio
Press Enter to exit
Please advise. Thanks in advance
Anchim
Click to expand...
Click to collapse
All looks good, but...
To verify security unlock, you can check here: http://forum.xda-developers.com/showpost.php?p=2580429&postcount=198
To test sim unlock use this command with ATCommander:
Code:
Enter into ATCommander:
[B][email protected]?40[/B] ---> check phone sim lock
Results
[B]@SIMLOCK= 00[/B] ---> means phone is unlocked
[B]@SIMLOCK= 01[/B] ---> means phone is locked
I can't remeber where to test CID unlock. If the above 2 are true, your probably OK.
Ta
Dave

DaveShaw said:
I can't remeber where to test CID unlock. If the above 2 are true, your probably OK.
Ta
Dave
Click to expand...
Click to collapse
Depending on what Unlocker you use. Boot into Bootloader, (Press the Camera Key all the way in and Press your Stylus into the Reset Hole.)
Then Check at the top that it says "Security Unlocked"

JimmyMcGee said:
Depending on what Unlocker you use. Boot into Bootloader, (Press the Camera Key all the way in and Press your Stylus into the Reset Hole.)
Then Check at the top that it says "Security Unlocked"
Click to expand...
Click to collapse
I know that !
In the link I posted there's a AT command to test for "security unlock".
I can't however remeber how to check if the CID lock is on or not, I suppose it depends on the SPL, Hard SPL's wont have a CID check, OEM ones will.
Ta
Dave

OP- Search and ye shall find the answer to almost any question you can come up with. They have all been asked already.

Thanks everyone for your respond. The only thing that worry me is, I didn't see the unlockcode and the device didn't restart on it own like the instruction said. This is the tool I used, Kaiser-SuperCID-tool. This info from the bootloader screen.
KAIS1*0 MFG
SPL-1.0.oliPof
CPLD-8
Thanks

anchim said:
Thanks everyone for your respond. The only thing that worry me is, I didn't see the unlockcode and the device didn't restart on it own like the instruction said. This is the tool I used, Kaiser-SuperCID-tool. This info from the bootloader screen.
KAIS1*0 MFG
SPL-1.0.oliPof
CPLD-8
Thanks
Click to expand...
Click to collapse
Yeah, you'll be fine, go forth and flash a ROM.
Disclaimer, I am not always right.
Poirot said:
Despard: I suppose even you have failed?
Poirot: The last time was twenty-eight years ago
Click to expand...
Click to collapse
Dave

Be aware of your SPL version. It will probably need to be updated. Search for JockeySPL for the expert advice. I think all 6.1 ROMs need to be version 3.xx SPL. Anyway, search it out to avoid issues. Sounds like you are on your way to ROM goodness.

kimtyson said:
Be aware of your SPL version. It will probably need to be updated. Search for JockeySPL for the expert advice. I think all 6.1 ROMs need to be version 3.xx SPL. Anyway, search it out to avoid issues. Sounds like you are on your way to ROM goodness.
Click to expand...
Click to collapse
kimtyson means the Hard SPL's from here: http://forum.xda-developers.com/showthread.php?t=396922.
Searching for JockeySPL return's nothing much use
Dave

Thanks for the assist Dave. You are the man!

DaveShaw said:
Yeah, you'll be fine, go forth and flash a ROM.
Disclaimer, I am not always right.
Dave
Click to expand...
Click to collapse
Thanks again for your reply. I have been using [Apr 29] Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 since I installed SPL-1.0.oliPof. everything seem fine. should I need to upgrade it and which version to install?
Thanks
Anchim

anchim said:
Thanks again for your reply. I have been using [Apr 29] Dutty's WM6.1 Hybrid v2 5.2.19716/5.2.19700 since I installed SPL-1.0.oliPof. everything seem fine. should I need to upgrade it and which version to install?
Thanks
Anchim
Click to expand...
Click to collapse
Flash and SPL from here if you are using WM6.1.
The ROM chef normally suggests the exact version. Anything 3.* will be OK.
Ta
Dave

DaveShaw said:
All looks good, but...
To verify security unlock, you can check here: http://forum.xda-developers.com/showpost.php?p=2580429&postcount=198
To test sim unlock use this command with ATCommander:
Code:
Enter into ATCommander:
[B][email protected]?40[/B] ---> check phone sim lock
Results
[B]@SIMLOCK= 00[/B] ---> means phone is unlocked
[B]@SIMLOCK= 01[/B] ---> means phone is locked
I can't remeber where to test CID unlock. If the above 2 are true, your probably OK.
Ta
Dave
Click to expand...
Click to collapse
Thank you, Dave. Again.