Qtek 9100 (1st Generation) Invalid Vender Error -> Lockiw - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I thought QTEK 9100 of the 1st generation were all unlocked???
I've been using a test rom for a few months running aku 2.
Today I tried to upgrade to 2.26 Tmobile and couldn't "Vender ID" error.
Does that mean I should try to use lockiwiz to unlock my phone or do I risk damaging it or ... what should I do?
Any help appreciated.

FYI for those who have the same problem I had (and now fixed).
CID unlocking gave me false success results under my 2.08 ROM and I still couldnt upgrade to 2.26.
So I downgraded to : CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
And then used : Lokiwiz02b
It was a success (for real this time) and I was able to upgrade to 2.26 which works great.

Excellent advice! I'm glad you found a solution. I have a 1st gen KJAM and experienced the same error. I will downgrade to the 1.01 WWE firmware from IMATE and then try Lokiwiz. thanks!

you are so lucky to have 2.08
I have SPL 2.21.0001 and cannot use that downgrade ROM
waiting for the new ver lokiwiz is the only thing so far I can do...

Related

Can't put I-Mate rom into unlocked QTEK9100 - Invalid Vender

Hello all, please help me...
I have a QTEK 9100 and it only takes a couple of the QTEK RUU updates and only a couple of the I-Mate K-JAM RUU updates. Most importantly it will NOT update to the latest QTEK 9100 RUU rom nor will it not update to the latest K-JAM RUU rom either. I prefer to have the latest K-JAM rom as that is what I have in my other MDA VARIO and it's great!
Now the error I receive is Invalid Vender (vendor?) ID... I HAVE unlocked the phone (both SIM unlock AND CID unlock)... I have CID unlocked it with both aWizard AND lokiwiz and I have also installed the EnableRAPI thing.
I have done everything I have found on these greate boards here at XDA-Developers and I have found nothing to fix this problem. I am able to use custom roms as well. But I can't use the K-JAM one. ALWAYS error 294 invalid vender id.
Does anyone have any ideas?
Thanks in advance
The only thing I can suggest is that the CID unlock didn't work fully. It's worth checking the text as the lokiwiz runs to make sure the CID unlock actually goes through - see various posts under the lokiwiz thread on the general wizrd forum for information. dropping back to the QTEK Custom ROM and then running the lokiwiz has been a solution.
still no luck
At the moment I managed to put a different custom rom on there (button's custom) and even after doin the lokiwiz unlock and then attempting to put the latest imate rom still have no luck, still the same error: Invalid Vendor ID. Also i think i tried the same with the original qtek rom as suggested and had no luck... maybe someone could point me to the custom original qtek rom that would fix my problem? Maybe i used the wrong one?
Thanks in advance
I used this one CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe - it's in the FTP site area
tried it didnt work
Hello my friend,
I tried the custom rom you suggested and THEN unlocked the device again, also did enableRapi, then attempted the latest Imat K-Jam rom update and it failed with error 294 invalid vender (vendor?) id... with the red green blue screen on the QTEK 9100... For additional info it displays IPL 1.01 and SPL 1.0.1.0000
Please let me know if you have any more ideas on how to update my QTEK9100 to the latest I-Mate K-Jam rom successfully. Also, for some reason one of the older I-Mate roms updated successfully, but the latest one doesnt.
Let me know and many many thanks...
Hi,
I had the same trouble. Try this:
Load the custom rom that JoninLA suggests.
Then unlock the CID using aWizard.
Then load the original Imate KJAM ROM from the ftp site
Then load the AKU2 Imate KJAM ROM
That should work.
Should I CID unloack with aWizard in between all these updates? I would think so right?
Thanks again
I did as jasoncheesemanuk suggested... with the custom rom on there i UNLOCKED CID, then upgraded to original IMATE rom, then attempted to upgrade to latest IMATE rom (without unlocking again) and i got the same problem: error 294 Invalid Vender ID
Please help, is there a solution out there? Why is this QTEK 9100 so stupborn?
Many thanks in advance for anyone's help on this.

Unable to update or change Roms

Hi, im currently using a UK t-mobile rom supplied with my phone
ipl 2.21.0001
spl 2.21.0001
gsm 02.19.11
os 2.21.2.6
i have managed to sim unlock my device quite easily but changing (ideally to the imate rom) or even trying to downgrade to a v1 ipl/spl is proving impossible so far can anyone give any advice on what method i can follow to switch over to the better i-mate kjam rom?
I have tried using lokiwiz v2b and v3 with no success
You have a G4. To my knowledge on http://www.imei-check.com can unlock it ... for a fee....
Other than that check out risidoro's thread at [How-To] Install any 2.x ROM in a CID-Locked G3 or G4 Wizard
ok thanks for the reply! i think ill wait and see if free but unrisky method is discovered

How to unlock CID?

Hi all. Tried and tried in vain, to replace the T-mobile splash screen, only to find out that the phone is CID locked.
Managed to upgrade to WM6 though, thanks to vlodeck and nocturne.op.15
Here's the phone details:
IPL: 2.06
SPL: 2.06.0000
GSM: 02.19.21
OS: 10.2.0.8 (WM6 by vlodeck & nocturne)
Oh, and also worth mentioning, my PC is running on Vista Ultimate, on which RUU's don't work. But some people said that if I install VMWare Virtual PC and install XP on that, RUU works through it.
So, how to unlock CID of this phone?
Wish I knew!
I'm in the same boat, so please can someone advise, thanks.
to cid unlock to need a ver. 1.xx of ipl/spl. And seeing you have 2.xx you cant really downgrade to ver.1.x
but can you told me whats rom have ispl ipl 1.x??
ok so saying you have ipl 1. what ever how do you cid unlock?
ftp://[email protected]/Up...er_1120223_11202110_11220_T-MobileUK_Ship.rar
will have ipl and spl ver 1. wherever you can get to install or not, might work with a noID ruu. then you can use lokiwiz2 to unlock the CID
There are rom versions that have 1.xx IPL and SPL but from my own experience I know, that once you upgraded to 2.xx or more, you cant get back to 1.xx. The most you can get is 1.xx IPL and 2.xx SPL.
Cheers,
vlodeck.
So, What ROM we must flash? To have 1.xx IPL and 2.xx SPL?
Maybe offtopic, but I have another question: If I have ROM from ERA GSM POLAND can I flash AKU3.3 TMobileUK ROM?
Charmer community is so small.... ;(
adexxx, you misunderstood me. You can't get 1.xx IPL and 1.xx SPL once you've already upgraded to 2.xx.
If it's an official ROM then you can flash it no problem. If its a custom ROM, use the tool I described in WM6 charmer thread.
When I tried to update with RUU: RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship it showed error: INVALID VENDOR
What I'm doing wrong?
use wizard noID upgrade utility. it's some around here, maybe even in charmer forum.
OK, I flashed and it works fine.
Now I have 3.0 IPL&SPL, my 1st splash was changed.
[offtopic end]

Downgrade Locked G3 with 3.08 IPL/SPL

I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2
Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.
Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol
I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas
You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp
Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario
imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry
Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.
thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry

Damn - Radio ROM upgrade & now No Signal or USB (active sync)

Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
have you upgraded the bootloaders to 2.xx before uploading the TNT ROM?
madnutter said:
Hi Guys, been searching but haven't really found much on this.
Right have a G3 Wizrd and loaded TNT 19209 (had ipl & spl1.06 with GSM 01.12.10)
Everything seem to be operating fine but not GPRS (settings were correct as test on another phone TMobile UK).
So decided to update the radio ROM to 2.47.11 (i think) and now unable to get any signal and even more frightening no USB connection.
I have already BRICK a phone this wk and this was to replace that one...(yeah, what a week)
Also the phone is extremely slow now too.
So advise would be greatly appreciated on this matter..
If i go to bootloader and plug in the USB it is recognised but unable to reload the radio rom from here. Do I re run the orignal ROM TNT (as i tried the onboard reinstall)
thanks
Click to expand...
Click to collapse
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
zabardast_1 said:
How come you got IPL/SPL 1.06 and running TNT 19209 ? TNT 19209 is a wm6.1 Rom,which can only be upgraded with IPL/SPL 2.xx. Did you CID unlock the phone before upgrading to TNT wm6 rom.
Click to expand...
Click to collapse
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
madnutter said:
Yes, i did Super CID unlock the phone before hand using the Wizard Service Tool.
Can i now upgrade IPL\SPL by using the tri screen or is there another way without booting into WM6.1? (I'll try taking sim out but don't think that will help)....
Any ideas?
thanks
Click to expand...
Click to collapse
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
zabardast_1 said:
Ok,if you say its Super CID,then you must not have upgraded to IPL/SPL 2.xx,mandatory for upgrade to wm6 thats why it shows ipl/spl 1.06 or its still not Super Cid and still on its official wm5 rom.
First,check again with WST tool to verify the CID lock/unlock status,if its still unlocked,then get it CID unlocked and upgrade to IPL/SPL 2.xx by flashing T-mobile 2.26 rom and after that upgrade to any wm6 rom.
But,if it's already CID unlocked then,YES! first flash to upgrade to IPL/SPL 2.xx and then upgrade to wm6.
Click to expand...
Click to collapse
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
madnutter said:
Thanks - Back and kicking now. Had to start phone in bootloader mode before i was able to flash again. Gone to TMobile 2.26. Used WST regarding CID:
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
Same for SIM.
Have now loaded TNT 19209 Pro but have stuck to 2.26 for now (or should i go up a level?).
thanks
Click to expand...
Click to collapse
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
IPL/SPL
zabardast_1 said:
Thanks ! glade you got it back and kicking
Well,upgrading to IPL/SPL 3.08 will not give you some very phenomenal boost or changes,it'll just slightly improve the Boot up timing only,which is hardly noticeable and nothing else,where as,it also sometimes creates problems while downgrading.IPL/SPL 2.26 are the most stable Bootloaders and have proven their worth time and again,if you are happy and comfortable with 2.26,My suggestion wud be to stick with them instead of upgrading to 3.08.
Click to expand...
Click to collapse
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
thurman said:
Do you have 2.26? I would like to downgrade back to it. I upgraded to 3.08, but I don't really see any difference.
Click to expand...
Click to collapse
Well,here I wud rather suggest you to keep running 3.08,as long as,it doesn't give or pose any problem,coz downgrading from 3.08 to 2.26 sometimes doesn't go successful and creates problems.
But if you really want to downgrade to 2.26,than simply flash back the T-mobile 2.26,it'll downgrade the IPL/SPL to 2.26,after that you can again upgrade to any latest wm6 or 6.1 rom,but the IPL/SPL will remain at 2.26.

Categories

Resources