One Way Audio in Car Kit - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hi All, im currently using Helmi AKU 3.0 1.2 and its great, however the audio fromn the phone to the carkit works (mutes speakers) but the microphone doesnt, it still uses the mic on the phone not the carkit. This problem was not there on wm2003, is this a registry type error, I have searched the forum but have not found anything similar.
Thanks
Paul

sorry i have not worded that very well!!
I have 2 parott ck3000 kits one in our car one in my van, the van one (the first to be paired) works perfectly the car one is the one with the mic problem, although the kit works perfectly on any other phone. Is it possible that only one device can have a handsfree pairing???
Sorry for the bad wording!!!!!!
Ta
Paul

Reverted back to Wm2003 Problem gone !!!
Something in aku 2.3 and 3.0 doesnt like handsfree!!!!!!
Sparks24

Reverted back to Wm2003 Problem gone !!!
Something in aku 2.3 and 3.0 doesnt like handsfree!!!!!!
Sparks24

Related

BT headset unusable

Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Which rom are you using?
I'm using Helmi's 1.4 rom Vanilla version and it works great with my Bluespoon AX and i-Tech Clip Radio.
You might want to hard reset and flash the WM5 and Radio 1.15 rom again.
I have upgraded to the vanilla version, but the problem remains... (nice version btw!)
The following was also the case with the previous version: when I hold my ba very close to my headset, the cracking stops. Then I have not only my ba to my ear, but my headset in between
I also have a bt gps receiver, which works fine, no matter how far in my car.
So now I still wonder why my ba has such a bt audio problem...
try i-tech s35
beldin2000 said:
Hello
A while a go, I upgraded successfully to wm2005. Since then, my ba works like a charm. Memory, BT, wifi,... all is going swell! The only aggravating point is I no longer can use my bt headset (jabra bt250v and jabra bt800). The problem is that there's so much disturbance that I cannot hear what people are saying and vice versa. I already upgraded the radio till the last version I could find on the ftp, but no luck.
Today I tried with other headsets (another jabra and another sonyericsson) and I have the same problem. But just now, I hooked it up with a sony ericsson bt carkit and the reception is flawless. Too bad that carkit wasn't mine ;-)
So I'm really at a loss here...
If any of you could help me out, I'd really appreciate it!
Thanks!
Beldin
Click to expand...
Click to collapse
Hi Beldin2000,
i suggest you to use I-tech Clip s35 with Helmi AKU3.5/vanilla.No proplem so far the sounds great
cheers
Device:O2xda2s/Ba
ROM Version:Helmi AKU3.5 Vanilla
Radio Version:1.15

8125 AD2P

I have read, and read but I can't seem to find a place where I can download a ROM (or any other way) to get AD2P on my 8125. Please someone tell me where. Thanks
anyone out there have an answer?
I just bought the HT820 and all i can do is get the audio to go to the bluetooth headset via mono, and it is very very low quality.
Download latest WM6 cooked roms as they are prepared for it (at least i can hear stereo on my Sony)
MrCLean AKU2.3 does
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
update: now working great on moto h820 headset
landwomble said:
I know WM5 roms aren't meant to do bluetooth stereo, but mine does. Been working nicely for sometime connecting to my belkin tunestage...
Click to expand...
Click to collapse
...mr clean aku 2.3 wm5 rom on wizard, no tweaks and sounding great right out of the box, and in stereo.

Better Bluetooth stack in WM 6.1

I have some problems with my HTC S730 with the Parrot MK6100. I was hoping that HTC would release an updated ROM, but the latest update doesn't fix anything that was really broken.
Maybe an unofficial WM6.1 is better, but I want to make sure that it has a better BT stack then the HTC ROM, before giving up some features...
Hello,
Sorry for my english (it's very very bad)...
I have a Wings and i use the parrot MK6100 with it
the problem is the linking, 2 or 3 test and reset "phone and bt car kit" for it works and after all it good for the hands free and wireless stereo (very good sound on car)
sorry i have a wings with WM6.1 WWE but before i have WM6 FRE and it worked too

Diamond + Nissan handsfree problem

Hi everybody!
I have problem using my Nissan Qashqai handsfree with Diamond. Sound quality it very bad (like transmitted only half of time-slots) and my voice isn't heared at all (silence).
My previous HTC 3300 and friend's GlowFish work well. Also i tested Diamond with Jabra handsfree - it was ok too.
I've changed several RAM and Radio, but nothing help.
Once i noticed on system tray message "Stereo handsfree connected". Maybe my problem becouse of Diamond stereo connection to mono handsfree?
How to debug this issue, is there any tools or tweeks for manual Bluetooth operations?
Sorry, i cannot help you but i do have the same problem!
I have a HTC Touch HD (Blackstone) and a Qashqai.
It apears the problem is related to WM6.1 bluetooth stack. I've read on the internet tjhat the problem is "solved" in WM6.0 and WM5 but i don;t know how to downgrade the bluetooth stack to the version of WM6.0 or WM5.
Maybe somebody can sent me a complete export of the HKLM/Software/Microsoft/Bluetooth registry of a WM6.0 or WM5 HTC device so i can compare these, maybe there are some changed "defaults" there?

No bluetooth handsfree with cooked roms

When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
I have DavidEuck 8.5 running and the bluetooth handsfree with my JVC carkit works fine. Can you try to pair with another bluetooth handsfree set and see if thats works fine? I would recommend at least upgrading to the latest radio.
backstep said:
When I flash my HD with a 1.56 cooked rom, I'm unable to connect with my handsfree. I can pair with the handsfree through bluetooth but I can not hear or speak to anyone.
If I flash with the stock HTC 1.56 rom, I can pair and talk through the handsfree.
Is there a fix for this? I've tried several cooked roms and the outcome is the same.
Thanks!
Click to expand...
Click to collapse
i have the same problem with most of the cooked roms specilly some times i can not hear the voice of other party this problem arrises with Miri's rom that i like it and Duty's rom that is very famous
for me stock roms and kwbr rom works fine
i have tested 3 devices Motorlla car kit, the expensive new Nokia sterio bluetooth headphone and sony erecsson sterio bluetooth head phone they all have problem with some cooked roms; i hope i can find a wm 6.5 rom that does not have this problem specially with good memory management like miri and kwbr that doesn't eat lots of memory.
Me, too. I am using daviddeuck v6. After 3 weeks sometimes it works and sometimes I cannot hear the other party.
I tried 2 jabra models with the same results.
Same issue
I had the same issue with my parrot 3200LS and Dutty's extreme 2.2/ Laurentius26's L26_THDV2.2_Ultimate Roms.
I even tried JETware Hands-free Extension for Windows Mobile phones (http://www.jetwaremobile.com) --supercool program btw!
But all to no extent.
Reflashing back to Laurentius26's L26_THDV7.5_WWE CE OS 5.2.20769 (Build 20769.1.4.5 L26) ROM "solved" the problem for me.
Now I get my phone's ringtones through my parrot (and thus my car-hi speakers ). Hope the problem is solved in newer roms...
(Btw, great job with your ROMs guys!! )
Y
Happens to me to.
ROM:
dutty v3.4
perhaps we could make a List of working/not worling Roms.
For me it's an essential feature for ROM choice.
Epecially bought a Radio for this feature...
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Use Onkologs Lite-Rom and it works perfect.
I found i couldnt pair my phone with a few handsfree devices i was testing in a shop - seems there is a problem with the bluetooth stack and the newer roms. Odd this hasnt been reported sooner
i feel there is a problem with the configuration between windows and manilla some where or the driver for blue tooth is not complete that is why it loses the connection somewhere for most of the cooked roms
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
backstep said:
I agree, there must be something wrong with the bluetooth stack.
When I use a 1.14 ROM, I can hear and speak to people through my hands-free. But, when I flash a 1.56 ROM all I get is "dead air" when I answer a call through my hands-free.
I've tried flashing to Dutty's, Miri's, Laurentius26's, Topix's and a few other rom's, with the same result, I am unable to hear & talk to the other person on my hands-free.
I also tried updating to the 1.14 radio and I've tried older radio's and I still have the same problem.
Starting July 1st, my state will require drivers to use hands-free devices when dialing and driving.
Click to expand...
Click to collapse
after trying almost all the new roms i returned back to the latest stock rom (28-4-2009) Bluetooth and every thing works absolutely perfect and it has got excellent memory management (only 32% with full loaded program), i use this rom when i want to rely on my HD.
by the way i think all the kwbr roms also works fine with bt. i wish i can find a 6.5 rom that works fine with blue tooth and has got good memory managemt, just waiting may be miri will do something, his rom got good memory management that is very imprtant for me
After the "SD card not shown", this is another weird report by using cooked ROM
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Yes I have.
I just got Miri's V15 pairing with my factory fitted Range Rover bluetooth kit and it works perfectly including giving access to the address book.
Previously I was using WM6.1 and many of Dutty's ROMs and I had intermittent drop outs with the car and phone.
Miri's ROM has upgraded my radio so I can't be sure if WM6.5 fixed the problem or if it was the new radio, but for the first time in 6 months I actually have a working hands free kit in my car
Royan said:
Almost same for me.
Duttys v 3.4 ROM
Ford Car Kit (just talk, no music) connects and works without any problems.
iTech Clip R35 (A2DP, AVRCP) will not pair at all.
(I don't know if the profiles mean anything. Just remembered that there was a lot of talk about supported profiles in the R35 manual.)
brgds
Royan
Click to expand...
Click to collapse
Well, that's me fixed...
Both car and iTech Clip works with Duttys 3.7/2.1 ROM.
And I'm ashamed to say; that the clip didn't connect earlier was my fault...
I used default code 0000 as stated in iTech's documentation, not the real default code of 8888...
Once I used the correct code, all was well...
brgds
Royan
I am using now Laurentius 2.1. My bluetoothheadset that suports only handsfree talking works properly. With my Jabra BT8010 only stereo music works, handsfree is a game of luck.
Hope any ROM expert will fix this in the future. For me it is one of the most important features of my TOUCH HD.
working!
Hi,
yesterday I flashed to Duttys 3.9 Turbo - and I love it!
BT works as A2DP & Handsfree!
beside it's very fast - what else we need
frottage said:
has anyone got bluetooth devices to pair with a cooked 6.5 ROM ?
if not this is a pretty major problem ??
Click to expand...
Click to collapse
Using Energy's 6.5 june 16th version.. Works PERFECT with my brand new Nokia BH-904 (which also is great)
it works in miri's rom as well plus you have lots of free memory when you really need it

Categories

Resources