connecting to gprs instead of wifi - MDA III, XDA III, PDA2k, 9090 Software Upgrading

hello, I am using helmi 1.2
with gprs settings ON
and wifi connected to my local wifi access point
when I open IE and try to view a website it notifies me that it wants to connect thru gprs, but I want it to connect thru wifi since its connected to my wireless router.
thanks

WiFi
Hi
Known problem in these AKU 3.x ROMs. Softreset the BA (with turned on wifi). Then it should work. If not, your wifi-settings are wrong. Try first with non secured wifi-connection, then increase the security step by step.
Chris
Qtek9090
Helmi_c AKU 3.0 1.1b
R: 1.15.00

I've been having issues with this as well. Besides the AKU 3.0 issues, you also need to make sure that both the wifi connection and the email account are set to use the same connection to the net. The choices are usually "The internet" and "Work".

Related

Very, very weird L2TP VPN issue

I have this 8125 running Summiter's latest and greatest. I also wanted to use it to connect to my L2TP VPN server. Configured the connection with the shared secret and everything, and it refuses to connect. Just says there was a server error. I pair my Axim to my 8125, and connect to the VPN with the exact same settings from the Axim via BT DUN. I can connect to the VPN from my laptop via EV-DO and BT DUN via the 8125. But the 8125 itself refuses to connect. Now, that is not the weirdest part... every now and then ActiveSync stops working... I could not figure out why, until I looked at my IP config... the damn 8125 was connected to the VPN... all by itself... and the "My Work Network" connection was disabled. DISABLED I SAY!
Has anyone else seen this kind of aberrant behaviour? Do I need to call Father Merrin? Do I need to use Gold Bond powder for those not-so-fresh days?

WiFi in Wizard - connection problems even with strong signal

Hello.
I've got HTC Wizard (Era MDA Vario) (Era is T-Mobile in Poland) with Crossbow Underground ROM. It's a very good phone at all but i still reach problems with WiFi. Even when I'm 30 cm from wifi router (Linksys WRT-300N), when I turn the WiFi on, it can't connect to my network. When i go to "Network Cards" menu and select Connect manually, Wizard connects almost always. Can I set my Wizard to connect automatically to my network when I turn WiFi on? It could connect automatically when I had very old 1.XX original ROM.
My current Radio ROM is Cingular 2.25.11, i've already tried 2.47.11. Anybody has this problem or know how to solve it? Maybe it's just a simple registry change?
Yours sincerely,
kasok
i also have a problem like that
mine connects automatically however, it losts connection after 10 sec. than it doesn't connect anymore. after soft-reset i can connect again
i'm using molski v3.3 radio 2.19

Wi-Fi connects but NO data transfer

Hi,
I have just got the Diamond and I have two main problem.
1) Although I have connected the Diamond to my Home wireless network, there is no data transfer. Opera can not open pages, Youtube can not start even I can not update weather?
2) When I connect the Diamond to the Laptop / PC, all PC's and Laptops connected to my home network (wireless) drop from the connection and never connect again?
Thank you for your kind help...
I have same problem with my Diamond.
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
bobo_error said:
1) go to: startmenu->settings->connections->Wi-Fi->networkcard/adapter->and make sure that it says "my networkcard/adapter connects to internet"Also at the same tab open IEEE 802.11b/g Compitable Wi-Fi Adapter and try to a static ip matching the one your pc uses. (not sure about it since i can't recreate the problem atm..)
2) Try the thing I suggested in this thread http://forum.xda-developers.com/showthread.php?t=417664 (plz use search next time)
Click to expand...
Click to collapse
Thanks for your reply, but both of solutions do not work for me...
Any other suggestion?
Thanks for your help..
Try turning on wifi, then go in LAN WIRELESS and change in "improved performance"
All of this do not work for me too...
Go to Wireless LAN settings and there to power mode and set yo best battery.... that worked for me.
in "settings => connections => WiFi" is "Connected". In "Wireless Lan" there is Connected too... In log on my router there is MAC adress of Diamond as associated and authorized. All seems OK. But on Diamond do not work any internet connection (Weather, web, etc...). With Active Sync works fine. Laptop with the same settings works fine. But Diamond with WiFi... no way :-(
Any other suggestions?
Same problem after i made ROM update from 1.7... to 1.93. before works fine. no other software is istalled.
Been having an issue with connecting to my wireless network also for the last week. My phone is from orange in the UK. My wireless router is an Dlink 614+ on Virgin cable broadband.
The Diamond would connect intermittantly but then say 'not avaiable' after a period of time, or when trying to reconnect after diasbling/enabling wi-fi in the comms manager. Also, after restarting my router the device would connect for a while but not seem to 'hold' it's connection.
When the device was 'connected' I could not get opera/youtube to load a page, even though I could see the diamond in my router's log showing it connected with a leased ip address. What made it so annoying was that every other wireless mobile device/laptop I have owned has connected without any problem at all, leading me to beleive there was a problem with the phone. Again, this was rather frustrating as the phone was detecting avaliable networks but just not 'holding' the connection nor 'using' the connection in opera/explorer etc.
After searching on xda-developers and other forums for a possible known issue, I tried all the various suggestions including;
i/ increasing to best performance under power mode in Wireless LAN settings
ii/ Hard reset of router (even though other wireless devices were connected fine)
iii/ trying static rather than dynamic ip for my diamond in router settings
iv/ disabling any security/encryption on my router
v/ entering DNS settings in manually into my diamond
vi/ changing 'connect to' under wi-fi neteorks to 'Work' rather than 'the internet'
vii/ tried various roms
and other suggestions I had read about - all which didn't make a difference!
I was about to send the diamond back to Orange (here in the UK) but decided to give it one last go and change my router. I bought a Netgear WGT624 for 25 quid from PC today world and my diamond connected
straight away without an issue, and opera/youtube/messager all connected straight away to the internet. I have not lost connection once. So thats how I resolved it - obviously my device did not like 802.11b (on the original dlink router) even though all previous smartphones have connected fine and the diamond's wireless adapter is labelled b/g.
Hope that stops anyone wasting a week like I did, I would try it out on another router before making any decisions because the chip in the diamond seems a lot more picky to what it connects to than anything I've used in the past!
cheers
Linksys WAG54 is OK, Freebox is not perfect
It really seems to depend on the WiFi router.
I've had probems with my French Freebox (my ISP's ADSL+wifi router) using WPA2 AES. It would work fine, for half an hour maybe, then it would stop. It says it's connected but there is no data transfer. You can switch WLAN off and on, soft reset the phone... nothing will do. Then it will work again later on.
I downgraded encryption to TKIP and i experienced the same problem.
But then I've tried my old Linksys WAG54G router, using the exact same encryption protocol and key and it works perfectly (for hours)!
I've also tested free access (Paris public Wifi, Mc Donald's...) and they work fine.
As my ISP wifi box does not let me have a look at all the settings (beacon time, etc.) it is very difficult to tell what makes it not-so-compatible with my Diamond... But there must be something.

Tilt Wi-Fi Problem after WM6.1 Upgrade (official)

Hi, I've had my Tilt for a while now, and I just updated to the new WM6.1 ROM this morning. However, after the upgrade, I could no longer get the wifi to work. I can connect to the wireless networks (tried different networks both open and secure), but when I try go to a website or use the internet, it just sits there and then says cannot connect. I have tried everything I can think of to fix the problem. I tell it to connect through work and through the internet, and messed with some other setting but that wouldn't do it. I plugged the tilt into activesync and it used the computer's connect just fine. Anyone having or had this issue, or have any suggestions?
Chris
Did you install the remove hidden proxy CAB?
If not, go here and get it:
http://www.4shared.com/dir/6996097/3f1f5d36/cabs.html
It's the removeHiddenProxy4CWS_0522 file
There may be others that do the same thing.
I installed the hidden proxy cab on my tilt, and the wi-fi still isn't working. Any other suggestions on fixing this problem. It's killing me. I though I'd be able to upgrade and reinstall all my files in just over an hour before I ran into this issue.
Update: Okay, I reverted back to the previous WM6 ROM and the wifi worked with absolutely no problem right off the bat. I don't understand what the issue could be and whether anyone else is having the problem. I'm going to try the WM6.1 ROM one more time, and then give up. I have to have wifi because I'm not willing to fork out money for a data plan. Any solutions or suggestions would be greatly appreciated.
change the power mode for the wireless mode to 'Best Performance'. This worked for me. Start -> Settings -> Connections -> wireless lan -> Power mode -> Best Performance.
Work Around For Wi-Fi Problem
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410
Park said:
I have found a work around for this and have tested on my "Tilt" which works 100% for the windows mobile 6.1 rom. On your device go to start, settings, connections then click on the connection icon then manage existing connections. Create on new setting on top of Media Net settings which you will have two connections. Name it Cingular GPRS, Enter Cingular GPRS, then Cellular Line (GPRS, 3G) for your modem, click next access point name wap.cingular, click next then User name [email protected], Password encrypted. The only thing you need to do is when using the internet & text messaging to have settings set on bullet mark Cingular GPRS. When using MMS only check check bullet mark for Medit Net and have proxy settings enabled at all times which will not affect your Wi-Fi connection to browser the internet once you switch back to Cingular GPRS in your settings. https://www.wireless.att.com/suppor...tutorialsCategory=MEdia+Net&tutorialId=614410
Click to expand...
Click to collapse
Hi, I tried you solution several times, but still could not get the problem fixed. I guess I am just resolved to going back to the WM6 ROM. Thanks for the info though.
@abhijitray: I already tried changing the power settings when I first began having problems, so that's not it.
i have the same problem with my Tilt. But i found that when i connect to my PC with the USB cable, ActiveSync is on, my IE works fine. With Wifi connection, IE is still dead.
maybe an off topic question, but what does the new rom have that the original rom that came with the tilt doesn't? anyone have a link or something, or is it something like better batter performance? thx
i have tilt with the latest official WM6.1 ROM, and have no issues with Wifi.
Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak
another thing I have noticed on my router is that my Tilt is not sending a hostname along with the DHCP request. Could that be the issue on the WiFi connection? I am wondering if that confuses the router.
Tom
I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.
pasole said:
I have the same problem too. tytn II with latest rom. At home with my old linksys which is a 802.11b device. If i disconnect wifi and then try to connect - the phone say - Unavailable. I notice that if i change the channel the phone connect just fine.... very strange
ps. sorry for my bad eng.
Click to expand...
Click to collapse
I see the same here - I think that by changing the channel it reboots/resets the router and allows you to try again.
ps. don't worry about your english. If this board was in a different language, I am sure that most people here would not even be able to post a thing.
kojak_nyc said:
Ok - here's my story.
I had a default WM 6.0 Official ROM Tilt and upgraded to ATT's 6.1. Immediately my WiFi stopped working. I waited for updates on this thread, and with my temper rising at such a poor release, I decided to go to Dutty's 6.1 Hybrid. Same thing - Wi-Fi didn't work. (To qualify, it would connect and get an IP address, but any attempt to access the net - ping, ftp, Gmaps, Activesync - would fail) I upgraded to the latest eMo radio and still didn't work. I scratched my head and decided to check my router. It's an older D-Link 802.11b and sadly the last firmware was released in 2005. I changed the settings on it to not use Turbo mode and voila, it connected. All happy and such.
But now the problem is slightly different. It will connect once, but after it disconnects (either because I manually turned off WiFi on the phone or the phone entered Standby mode) I cannot connect again. I literally have to reboot my router. This is great a home, but I worry when I have to use a public wifi hotspot. Any thoughts on that?
And yes, I have played around with the power settings.
Kojak
Click to expand...
Click to collapse
Well, your problem sounds exactly the same as mine (WM6.1 official). Maybe I should have tried a public hotspot, but it just wouldn't work on my home network (I even cut off the encryption and made it open). I downgraded back to WM6 ROM and everything working fine, so I guess no WM6.1 for me.
It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.
For me, it was the opposite. I could get WiFi to work at my office on Mobile 6.0, but I couldn't get my network at home to work. I have a Wireless-N network at home, and even though I set it to B-G only mode, it still wouldn't connect. As soon as I hit WM6.1, everything was fine.
Unfortunately, this happens more than one would think with Wireless network equipment.
kojak_nyc said:
It is definite a router by router problem. Had problems with the D-Link but I tried it on a Buffalo 802.11g router running Tomato firmware, and I had absolutely no problems. That being said, this could be either a:
802.11b problem?
D-Link problem?
Something must have changed in the WM 6.1 code from WM6.0 as it pertains to WiFi. If only it was as easy as a toggle setting to fix.
Click to expand...
Click to collapse
Kojak_nyc,
You hit it on the head. It is a router issue, although its not limited to the D-Link router because I have a 2wire HomePortal 1000HW and it also doesn't work. It is also on 802.11b, so that could also be the issue. Something must have changed between in the settings the WM6 and the WM6.1 upgrade. I'll go ahead an inform HTC of the issue (not that they'll do anything).
I believe that the once the tilt is updated to WM6.1, it no longer works on IEEE 802.11b.
I think this is a Dlink issue. I've got a linksys router at home and it connects to that fairly quickly. ssid on that isn't hidden cuz i've got vista machines that have a hard time connecting.
anyway, at work i've got a dlink di624, 802.11g, router and i've not been able to connect the kaiser to it. i think tomorrow i'll do what was suggested and just play around with the channels and find which works. the dlink's set to automatically choose the channel it uses so i'll hard code it for a channel i know the kaiser'll scan for and then see what happens.
if it doesn't work i'll juts keep using the 3g connection... i do have 6GB/mo and haven't come anywhere near using it up.
Experienced similar problem just now. I just upgraded to WM 6.1 and my WiFi connection's been unstable since last night. I have a wireless router with excellent signal on my room and enjoys streaming video before I upgraded to WM 6.1. When I reset the phone it restored WiFi connection again.
Hope you could share some tweaks to resolve this problem.
Thanks.

can connect to WLAN, obtain IP-Address ok, but can't surf

Hi,
all of a sudden I have this problem with my Kaiser that I can't access the internet using WLAN any more:
-turn on Kaiser Wifi in Comm Manager: ok
-connect to my WLAN: ok
-optain IP: ok (I see IP address in phone and on clients list on my WLAN router)
-Internet Explorer on Phone: no joy, always "Page not found"
-Network Test Utility on Phone: no joy, ping always times out
-also other applications (e.g. Quick GPS to update the satellite position data) can't access the internet
Does anybody have a clue? It used to work, and I don't know what could have caused this, I don't remember having changed anything.
My WLAN router and connection to the internet works of course...
Cheer
BigBadBayer
Give the wifi more power?
Can you ping the phone from another computer on your network?
Do you have proxy settings on the phone?
neutronscott said:
Can you ping the phone from another computer on your network?
Do you have proxy settings on the phone?
Click to expand...
Click to collapse
Thanks for the suggestion, I have not tried to ping my phone, will do it when at home.
Proxy settings? where could I configure those? I do'nt find anything in then Internet Explorer - I'm quite new to Windows Mobile.
To ChumleyEX: even when I am in the same room as my router with 100% signal strength it does not work..
i would look in the router settings
bigbadbayer said:
Hi,
all of a sudden I have this problem with my Kaiser that I can't access the internet using WLAN any more:
-turn on Kaiser Wifi in Comm Manager: ok
-connect to my WLAN: ok
-optain IP: ok (I see IP address in phone and on clients list on my WLAN router)
-Internet Explorer on Phone: no joy, always "Page not found"
-Network Test Utility on Phone: no joy, ping always times out
-also other applications (e.g. Quick GPS to update the satellite position data) can't access the internet
Does anybody have a clue? It used to work, and I don't know what could have caused this, I don't remember having changed anything.
My WLAN router and connection to the internet works of course...
Cheer
BigBadBayer
Click to expand...
Click to collapse
The phone had been working fine with the same hardware and firmware?
I've seen this issue with some WiFi routers, you need to increase the power of the phone WiFi signal, even when the phone is at 5 cm from the router.
In my case only old WM 6.0 radios, or 1.58.26.20 WM 6.1 radio connect without problems on "low power" setting, and from very far away.
I'm not sure what's wrong with that router, I have 4 laptops and all connect fine (obviously the laptop antena is 100 times bigger, and it has a lot more power available, but with the phone at 5 cm from the router, that's not the problem)
Solved thanks to
ChumleyEX and vcespon: you were right!
I had to change the wifi power slider to "best performance". Now it works.
Thank you.
vcespon: to the radio you mentioned (1.58.26.20 WM 6.1 radio), do you know where I could get it and flsh it?
aw I was right, I feel all tingly inside.
Tnx mate, i've been looking at this problem all day. Increasing the radio's signal strength worked for me too.
thanks... it works

Categories

Resources