I have an XDA IIi with the O2 Blue headset - when it was new it all worked fine. However. it seems that after I once sinked my XDA with the bluetooth system in my Wifes Nissan Navara, a phonecall is no longer audible on the headset - even though it still works for normal system sounds.
Tried removing - reinstalling, etc. etc. - nothing works.
Syncs fine, sees the headset fine every time, but nothing when in a call.
Related
Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset.
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
I have done several hard resets and also tried A2DPfix, Kaiser Tweak (Changing bluetooth quality to low) and also Jetware Bluetooth Extension with the supposed plugins, but to no avail...
Can someone help?
Can any registry hack / software help?
I have tried some tweaking with the BitPool and MaxSupportedBitPool but still din't work for me.
http://forum.xda-developers.com/showthread.php?t=352297&highlight=headset+disconnects
let's move this problem to one thread
caulirick said:
Hi guys,
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself. I have to manually connect the bluetooth headset to the TyTN II again to re-establish the music streaming (A2DP).
Click to expand...
Click to collapse
I also have a DS980 BT and same **** happens with me.
Last time my HTC music played crashed and all I could do was a soft reset Have tried different settings with no success.
If I'm not using the player then DS980 seems to disconnect after a call, at least the BT icon is gone.
However, when next call is received/initialized BT icon appears again and headset is connected.
Don't remember if it's still there after second call though.
Same problems I have too...
But my DS980 performs intermittently. Sometimes when a call comes in during playback, it flawlessly switches to the phone call, and then switches back to music after the call ends... However, this only lasts for a little while, and then it reverts back to the usual fault (headset disconnecting after a call and music plays through the device's speakers).
Sounds really silly... wonder what is causing it...
Please, is there someone here that can help us out? Must be some Bluetooth tweak that allows the device to rediscover the headset after a call....
I am having an issue with my N1 and my 2010 Acura TL Bluetooth.
Sometimes it connect just fine, others it connects and then drops and still other times will connect the media portion, but not the phone portion.
Does this sound like a software issue(Bluetooth Stack) or defective hardware on the N1?
My car's Bluetooth is fine as it pairs and stays connected to my older phone and other phones that I have tested.
dan1431 said:
I am having an issue with my N1 and my 2010 Acura TL Bluetooth.
Sometimes it connect just fine, others it connects and then drops and still other times will connect the media portion, but not the phone portion.
Does this sound like a software issue(Bluetooth Stack) or defective hardware on the N1?
My car's Bluetooth is fine as it pairs and stays connected to my older phone and other phones that I have tested.
Click to expand...
Click to collapse
I'm pretty sure it's software-based. IIRC, Bluetooth is partially broken on Android and hasn't been completely fixed yet.
PacoL250 said:
I'm pretty sure it's software-based. IIRC, Bluetooth is partially broken on Android and hasn't been completely fixed yet.
Click to expand...
Click to collapse
+1
It's a software issue with Android which will [hopefully] be fixed in soon-to-come Android versions
I have same problem with Nokia's car kit and N1. When I start my car, phone connects to HF and says "connected to phone and media" (or something like that) in BT-menu.
Spotify plays music via A2DP thru car kit without any problems, but sometimes phone connection is partially dropped (incoming voice) without any notification. When call arrives, Spotify stops playing music as it should be and I can answer to phone call, but I can't hear callers voice. However, caller can hear my voice, so only callers voice is muted.
This happens randomly. Sometimes phone audio works and sometimes not.
Is this problem reported to Google?
xyz1303 said:
I have same problem with Nokia's car kit and N1. When I start my car, phone connects to HF and says "connected to phone and media" (or something like that) in BT-menu.
Spotify plays music via A2DP thru car kit without any problems, but sometimes phone connection is partially dropped (incoming voice) without any notification. When call arrives, Spotify stops playing music as it should be and I can answer to phone call, but I can't hear callers voice. However, caller can hear my voice, so only callers voice is muted.
This happens randomly. Sometimes phone audio works and sometimes not.
Is this problem reported to Google?
Click to expand...
Click to collapse
Can I upgrade bluetooth 2.0 to bluetooth 3.0 one my nexus one ???
I have a Jabra BT3030 and paired it with my Galaxy S.
Stereo sound works fine, but my gripe is that none of the bluetooth controls work (back, pause/play, forward). I tried this with another headset (altec), but is still doesn't work. The volume controls work fine though.
Has anyone experienced this?
Is this an android limitation or is it just with the Galaxy?
btw, my firmware is JM7 in case it might be with the firware...
Sent from my GT-I9000 using XDA App
The buttons work fine on my platronics bt. Wait for froyo official as its said to have improved bt headset features
working fine with
Jabra BT8010
Motorola HT820
my car CZ509
and a few other older BT stereo headsets from Sony, Plantonic, etc
I'll suggest to pair it again.
the controls are usually 1 touch for pause/play, double tap for skip next, unless it has its own buttons for that, and... well lots of other combos depending on the buttons setup on the headsets
@allgamer
paired it again and still a no go. it has its own buttons for play/pause, forward, back, volume, answer. basically, its a bluetooth module where i can plug my own earphones.
it's working flawlessy with my omnia hd.
do you know what bluetooth profiles our galaxy s supports?
Sent from my GT-I9000 using XDA App
not exactly, but i do know it supports all the standard stereo, a2dp, avrcp, file transfer, contacts, GPS, phone calls, the only things not supported are HID mouse and keyboard
hmm... something doesnt add up... maybe the rom since i havent tried it with prev firmwares. i'll try pairing again.
Sent from my GT-I9000 using XDA App
I have the same issue. Use SBH650 bt. But it appears only in standart player. I also use Ambling Player for audio books and it works fine with it. My firmware is JM2. Re-pairing doesn't solve this issue.
I'm using Sony Ericsson MW600 & DS980.. both seems fine..
still no go for me... seems the answer/end key does work, as well as the volume keys. so only my playback, fw/rew key don't work. but when i press them, the screen lights up and the touch buttons light up too. i'll try experimenting with a diff player and see if it's just with the samsung misuc player.
OT: DaRkMyk, where'd you get the SE MW600? I've been looking for that for a while now.
MW600 and Galaxy S
I see that a few people use the MW600 with the Galaxy S. I recently bought a MW600, the device is paired to the phone, plays music fine with all the controls working. It is also the default calling device. And this is where I have a problem, when I make or receive a call the called/calling party can hear me clearly but I can't hear anything. I have turned up the volume to max, I have also reset the MW600 and repaired it with the device, turned off the wi-fi on the Galaxy S,. Basically tried most of the solutions that are available. Has anyone else had this problem. I tried the MW600 with some other phones (Nokia X6) and had the exact same problem.
@aridoasis I bought mine here in singapore for S$118. I don't know if it is available there in the Philippines, but you can always buy from eBay & it's also cheaper.
@sandsri I never experienced that problem, have you tried your MW600 on other mobile phones?
Sent from my Samsung I9000 Galaxy S.
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
michaean said:
Hi Guys,
I have the Amazon's original version (with the ads version), and I experience the following issues.
1) Blutooth connects initially with both A2D and HSP fine, however after a disconnection, it can't connect again to HSP, only to A2D. I've seen this with x2 devices - BLU can't connect to them both after disconnection to with HSP. Only after rebooting the phone, it can connect again initaly to HSP.
2)When plugging a wired headset, I can hear through it great, and also record my own voice with voice recorder, i.e mic and headphones work. However when dialing, I can hear the other side, but the other side can't hear me. Tried with x2 different wired headset, that worked good with another phone.
I've tried searching for info on these issue, but couldn't find anything. Could you advise ?
Thanks,
Michael.
Click to expand...
Click to collapse
As far as your wired headset issue, it does not happen on my r1 or my sisters r1. Your phone may just be defective in some way. I have called people successfully using a headset
Having same issues and found that by doing a reboot or restart I can correct them. But it comes back later. Irritating!
I see this too often as well. Restarting the speaker doesn't help - I have to reboot the phone to get it working again. It's very annoying as the built-in speaker is so bad that I always want to use the Bluetooth speaker when I'm home.
Hello,
As title says suddenly I can't hear anything through my car BT (Audi) or BT headphones. It was working fine till around a week ago.
I can hear media\music just fine (for example Spotify) in both headphones and car speakers.
Bluetooth is connected correctly as usual, but I can't hear people in calls and they can't hear me too.
In car I can normally start a call with steering wheel buttons, just I don't hear anything. If I change audio output on phone to speaker or phone I ear them, if I rechange to BT silent again.
I tried another phone in my car and it's working fine.
I tried my phone in another car and same problem occurs, so it's some setting in my phone (even if I don't remember changing anything since it was working).
I'm on stock OOS 9.0.5 + Magisk.
Things I've tried by googling A LOT of forums:
1) Resetting network\BT data from Settings>Reset
2) Clearing storage and cache for the Bluetooth system app
3) Manually deleting paired devices from both my car and my phone and re-add them.
4) Played with the BT audio codec\bitrate\version\etc options in developers menu without luck.
5) Tried disabling google now, ok google feature.
6) Tried disabling device discovery for Bluetooth.
Things I take as last chance: changing kernel, clean flash.
Any suggestions?