CID Unlocking and ROM info on uk Tmobile Vario - 8125, K-JAM, P4300, MDA Vario Software Upgrading

OK I'm thinking about trying a different ROM, I have alot of programs installed that are included in some of the ROM's on here, so I guessing I would save some memory by installing a custom ROM? also removes some of the Tmobile crap? Will it be safe to install any ROM on here?
I dont understand all the different names (aku etc)
I have SIM unlocked it, but not tried to CID unlock it yet.
I have IPL/SPL 2.21 on the loader screen, is this a G3 model?
Installed with latest Tmobile ROM (This was wireless G enabled)
I have searched on here for info, and found some, but because its a delicate procedure, I would like to be sure before I risk it.
Can someone tell me how to CID unlock it and install a ROM?
Should I even bother, or stick with the Tmobile one?
Thanks

Related

how can i use WIZARD with VODAFONE ROMANIA network ?

Hello everyone !
i have just bought this device. not yet received it ...it's on it's way. I want to find out what do i have to do with the rom or whatever to make this device work on vodafone romania network?( vodafone bought CONNEX )
I'm not sure what rom it has, most probably T mobile .
And further more, can you tell me how to upgrade to this rom?where can i buy it from and how to flash the deivce. I've read that u can only flash the rom with a specific ver...an older version.
HELP?
10x a lot
after searching a little bit ... it's not the rom i need to flash to use it on vodafone, i have to unlock it.
ok, anyone can tell me what DO I NEED to unlock and make it useable on vodafone romania?
PLS ! 10x again
Unlocking
If you do a little search around here, you'll find a software called Lokiwiz, and all you need to do is follow the instructions and you can unlock your device. it's a good Idea to do a CID unlocking as well (with the same software) before you upgrade the ROM. Right now I've been using the Mr. Clean ROM for a couple of days, and it's working fine. I would recommend that one.
Hai Noroc!
If it's T-MO branded, you will definitely have to unlock it before using it back home in good old RO
like i said in a pm, i kind of know what do i have to do. my only worry now is the downgrade to a 1.xx rom.
With the mda still CID locked & sim locked i have to downgrade to a 1.xx rom in order to use the lokiwiz right?
So, to avoid any problems while doing this, which rom should i use for 1.xx version?

final solution to cid unlock wizard g4 chip spl/ipl *.001

Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
Nextasy said:
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Click to expand...
Click to collapse
thank you very much. I have gone through if not all the threads about upgrading. I noticed that people who had the G4 chip had problems upgrading . and some people have also said that you cant unlock the cid of the G4 (spl/ipl with .001 at the end).
I am looking for how to acheive the unlocking of the cid, hence i will be able to do upgrades and downgrades as i wish.
I think http://www.imei-check.co.uk/m3000unlock.php is good & cheaper for cid unlock, as compare to other method. The JAxxx method will cost you around EURO 85 to buy the dongle & 1 unlock credit & you have to wait for the dongle to arrive.
If you just want flashing PDA into other language on G4 PDA, you can use update_utility_no_id , no need cid unlock. Search this xda-developers.com forum for the tool.
Even after CID unlock, Downgrade a g4 rom to a g3 rom, from my experience, the radio will not run properly. A G4 PDA can only use a G4 rom. A G3 PDA can use a G4 rom , because the G4 shipped rom has 2 IPL & SPL, will fit both e.g. 2.21 IPL & 2.21.0001 IPL
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
mengesb said:
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Thanks again to everyone.
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
kyphur said:
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
Click to expand...
Click to collapse
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
moyofalaye said:
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
Click to expand...
Click to collapse
It can be any descendant of the Wizard from what I hear, either a model 100 or 200, be it a Cingular 8125, or a T-Mobile MDA. Always check your SPLs before flashing. The phone you save just may be your own.
mengesb said:
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Why pay for something you can have: free, better, safer???
Don't CID unlock your device, it's a waste of time and money. The best solution is, IMHO, to remove the IPL/SPL parts from the ROM you want to install: it'll take you only 2 minutes! This solution is also better than CID unlocking in three aspects:
- It's free. No need to comment on this
- It's better: in a CID unlocked G4 phone, you cannot install the home-made ROMs you find in this forum (like summitter's ones or MrClean). If you cook your own ROM, on the contrary, you can install whichever 2.x ROM you like
- It's safer: if you correctly remove the IPL and SPL parts from the ROM you want to install, the event of a major damage (bricking) is highly unlikely. Even if your PC crashes or there's a power outage in the middle of the upgrade you will still be able to boot your device and to repeat the upgrade!
To remove IPL/SPL from a ROM of your choice, you can follow this tutorial i wrote: http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Johnnnnnnnnnny said:
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Click to expand...
Click to collapse
Yes!
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Johnnnnnnnnnny said:
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Click to expand...
Click to collapse
You need all the files in the RUU archive. Just follow the tutorial i told you about. bye
Also: CAN YOU PLS CHANGE THE TITLE OF THIS THREAD??? IT SEEMS THAT YOU HAVE A WORKING SOLUTION BUT ACTUALLY IT IS THE OPPOSITE: YOU'RE LOOKING FOR IT. ADD A "?" IN THE TITLE!

Unlocking doesn't work

after i installed the official TMobile 2.21.2.108 rom version, i am not able to unlock the unit.
I would like to try and install original Qtek/HTC roms or Custom Roms created by other users.
Is there a way to unlock the Vario when it has the 2.21 rom installed? A friend of mine has an older version, and he can do whatever he wants with it.
Are you talking about CID or SIM unlock?
It would help also if you told us what unlocker software and it's version you used.
Sgele said:
after i installed the official TMobile 2.21.2.108 rom version, i am not able to unlock the unit.
I would like to try and install original Qtek/HTC roms or Custom Roms created by other users.
Is there a way to unlock the Vario when it has the 2.21 rom installed? A friend of mine has an older version, and he can do whatever he wants with it.
Click to expand...
Click to collapse
You cannot CID unlock 2.xx Roms yet.
1) You simply had to unlock before you upgraded to 2.21
2) Or lookup the thread for upgrading your device without CID unlock.
Regards,
Molski

Listen, im sorry but i need help

Hey, ive been reading for a while but i still dont know exactly what to do to upgrade my tmobile mda. im pretty sure its the vario one. and it's image version is 1.8.10.104. its ipl and spl are both 1.08 so i think that means itsa g3 chip. I tried downloading a different rom but it just didnt work.
I just want the newest version. I have bluetooth stereo headphones and i would love to use them with this phone. Any help with be much aprreciated
jawnsixteen said:
Hey, ive been reading for a while but i still dont know exactly what to do to upgrade my tmobile mda. im pretty sure its the vario one. and it's image version is 1.8.10.104. its ipl and spl are both 1.08 so i think that means itsa g3 chip. I tried downloading a different rom but it just didnt work.
I just want the newest version. I have bluetooth stereo headphones and i would love to use them with this phone. Any help with be much aprreciated
Click to expand...
Click to collapse
read the Sticky for the definitive guide to CID unlocking and upgrading G3 wizards.
If you follow every step in that tutorial you will:
a. have a CID unlocked wizard capable of being flashed with any wizard rom, custom or otherwise
b. you will KNOW that you device is CID unlocked because you did it yourself
c. ROM's will actually flash because your CID is unlocked.
NOTE: you currently have a 1.08 bootloader. You cannot flash a 2.xx custom rom until you upgrade your bootloader to 2.xx. The easiest way of doing this is flashing the much promoted T-Mobile 2.26 rom. Of course if you follow all the steps in the unlocking tutorial you will end up with IPL/SPL 2.26 and be CID unlocked.
ok, thank you
it says that it voids the warrenty
But i thought it was a made-by-tmobile download?
And can't i just reboot it to the original version i have right now if there are any problems or anything? Will the notice? is it possible?
jawnsixteen said:
ok, thank you
it says that it voids the warrenty
But i thought it was a made-by-tmobile download?
And can't i just reboot it to the original version i have right now if there are any problems or anything? Will the notice? is it possible?
Click to expand...
Click to collapse
If you want WM6 you will be voiding your warranty as you won't be able to flash it unless you are CID unlocked.
There currently is not and most likely NEVER will be an official WM6 carrier rom for the Wizard.
If all you want is the latest carrier rom from your carrier then all you have to do is go to their website and download it and follow the instructions. You won't have to worry about CID or warranty voiding.
As for them noticing, maybe, maybe not. It really depends on who you talk to. If you stay with roms only made and released from your carrier you won't have anything to worry about as you can flash them without doing anything that will void your warranty.

Looking for any old TMobile ROMS

Hows it going guys this is my first post....ive had so many problems since switching to cingular with my tmobile MDA its hillarious!...i unlocked the MDA...got it too work with Cingular! I thought everything was perfect untill i realized i couldnt receive any text messages from any other carriers. Meaning if i used my cousins cingular phone to text my phone it would work....if i used my sprint phone...nothing would reach my phone...so i serched n applied all kind of cingular MMS GPRS settings .CAB files still nothing. If i put my SIM into an offical cingular phone the same thing happens...so now im hoping if i put the cingular rom on my phone it will make things better.. I need to downgrade first because every CID tool i use wont work but i found out its because i have 2.25 so basically does anyone have an old 1.XX offical T-Mobile ROM backed up anywhere or know how i can receive all text messages from all carriers?? Thanks
welcome...and in the future if you take a few minutes to read the stickies and wiki, you may very well get your answer.
the following link is to a sticky which links to button's 1.05 rom.
http://forum.xda-developers.com/showthread.php?t=285435
well thanks for the help but when i try installing that rom it locks up at 98% everytime and gives me an error....is this becaise of that CID thing is still locked????
Did you follow that tutorial step by step??? I had no problems with the button rom so I am not sure. I myself followed that tutorial when I recently unlocked my MDA and it went without a hitch...make sure you run lokiwiz twice and button twice. Not sure what else to tell you...sorry.
MCarter418 said:
well thanks for the help but when i try installing that rom it locks up at 98% everytime and gives me an error....is this becaise of that CID thing is still locked????
Click to expand...
Click to collapse
No, the Button rom is for the purpose of unlocking and is a really low IPL/SPL which was before the CID locking stuff was around.
I've read on another post that someone was having problems flashing the button rom like you are, and they were finally able to flash it by changing their radio rom first (I don't know if they had one of the newer radio's or what). Doesn't make sense to me as I've never seen that before, but what they heck, you could try downgrading to like the 2.19 T-Mo UK radio to see if that helps.
Also, have you tried flashing the T-Mobile 2.26 rom to your phone? Since this is an MDA and you are running Cingular 2.25 it sounds to me like you were already CID Unlocked (and you don't have to downgrade again to switch carrier roms, just switch).
It also is best to remove your sd card when doing the downgrading procedure.

Categories

Resources