Hey, ive been reading for a while but i still dont know exactly what to do to upgrade my tmobile mda. im pretty sure its the vario one. and it's image version is 1.8.10.104. its ipl and spl are both 1.08 so i think that means itsa g3 chip. I tried downloading a different rom but it just didnt work.
I just want the newest version. I have bluetooth stereo headphones and i would love to use them with this phone. Any help with be much aprreciated
jawnsixteen said:
Hey, ive been reading for a while but i still dont know exactly what to do to upgrade my tmobile mda. im pretty sure its the vario one. and it's image version is 1.8.10.104. its ipl and spl are both 1.08 so i think that means itsa g3 chip. I tried downloading a different rom but it just didnt work.
I just want the newest version. I have bluetooth stereo headphones and i would love to use them with this phone. Any help with be much aprreciated
Click to expand...
Click to collapse
read the Sticky for the definitive guide to CID unlocking and upgrading G3 wizards.
If you follow every step in that tutorial you will:
a. have a CID unlocked wizard capable of being flashed with any wizard rom, custom or otherwise
b. you will KNOW that you device is CID unlocked because you did it yourself
c. ROM's will actually flash because your CID is unlocked.
NOTE: you currently have a 1.08 bootloader. You cannot flash a 2.xx custom rom until you upgrade your bootloader to 2.xx. The easiest way of doing this is flashing the much promoted T-Mobile 2.26 rom. Of course if you follow all the steps in the unlocking tutorial you will end up with IPL/SPL 2.26 and be CID unlocked.
ok, thank you
it says that it voids the warrenty
But i thought it was a made-by-tmobile download?
And can't i just reboot it to the original version i have right now if there are any problems or anything? Will the notice? is it possible?
jawnsixteen said:
ok, thank you
it says that it voids the warrenty
But i thought it was a made-by-tmobile download?
And can't i just reboot it to the original version i have right now if there are any problems or anything? Will the notice? is it possible?
Click to expand...
Click to collapse
If you want WM6 you will be voiding your warranty as you won't be able to flash it unless you are CID unlocked.
There currently is not and most likely NEVER will be an official WM6 carrier rom for the Wizard.
If all you want is the latest carrier rom from your carrier then all you have to do is go to their website and download it and follow the instructions. You won't have to worry about CID or warranty voiding.
As for them noticing, maybe, maybe not. It really depends on who you talk to. If you stay with roms only made and released from your carrier you won't have anything to worry about as you can flash them without doing anything that will void your warranty.
Related
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Re: final solution to cid unlock wizard g4 chip spl/ipl *.00
Nextasy said:
moyofalaye said:
Please whats the best solution to making the wizard with G4 chip cid unlock ?
is it by going to http://www.imei-check.co.uk/m3000unlock.php or
something else?
thank you very much in advance to those who know or can help
Click to expand...
Click to collapse
hy
Search the forum for "lokiwiz " (sorry, i dont have the thread) v. 2b should be able to unlock the CID. There is also version 3 available but i guess any will do.
You have to be logged in to be able to download it.
Good luck
Click to expand...
Click to collapse
thank you very much. I have gone through if not all the threads about upgrading. I noticed that people who had the G4 chip had problems upgrading . and some people have also said that you cant unlock the cid of the G4 (spl/ipl with .001 at the end).
I am looking for how to acheive the unlocking of the cid, hence i will be able to do upgrades and downgrades as i wish.
I think http://www.imei-check.co.uk/m3000unlock.php is good & cheaper for cid unlock, as compare to other method. The JAxxx method will cost you around EURO 85 to buy the dongle & 1 unlock credit & you have to wait for the dongle to arrive.
If you just want flashing PDA into other language on G4 PDA, you can use update_utility_no_id , no need cid unlock. Search this xda-developers.com forum for the tool.
Even after CID unlock, Downgrade a g4 rom to a g3 rom, from my experience, the radio will not run properly. A G4 PDA can only use a G4 rom. A G3 PDA can use a G4 rom , because the G4 shipped rom has 2 IPL & SPL, will fit both e.g. 2.21 IPL & 2.21.0001 IPL
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
mengesb said:
Currently you are right - A G4 rom cannot be unlocked free via any software available on this site. If you truly want to unlock you're phone, you're going to have to pay.
That noted, you will always have to make sure that the ROM you're flashing will not replace your bootloader (which is a safe way to go anyway) or flash with a newer bootloader than what you have (which is the IPL/SPL 2.x). Do not ever go backwards (1.x bootloaders) because you will brick your device.
The only saving grace you can give an attempt to is the lokiwizMSL03a or lokiwiz03a programs by machinagod. I cannot confirm if these have or have not worked with a G4 chipset wizard.
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Thanks again to everyone.
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
kyphur said:
moyofalaye said:
Ok so if i was to use the http://www.imei-check.co.uk/m3000unlock.php to cid unlock the g4 wizard, i wont need to worry about what rom im flashing, i wont need to worry about the spl/ipl ? So basically your saying all the flexibility of the G3 will be available for the G4 ?
Click to expand...
Click to collapse
Wrong.....
The Custom "Cooked" Roms on this site only contain the IPL/SPL for G3 as that is the most common chip.
Also 1.x Roms have no G4 bootloaders.
Even CID unlocked you will be limited to "Official" Roms or "Cooked" Roms either missing Bootloader or specifically with G4 Bootloader.
Click to expand...
Click to collapse
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
moyofalaye said:
thanks that clears up alot of questions, one more thing i need to know, cause i have started working on the wiki. the G4 and the G3 versions, are they limited only to the tmobile vario or all types of wizards. ?
Click to expand...
Click to collapse
It can be any descendant of the Wizard from what I hear, either a model 100 or 200, be it a Cingular 8125, or a T-Mobile MDA. Always check your SPLs before flashing. The phone you save just may be your own.
mengesb said:
Safe bet currently for G4 wizard owners - pay to get the thing unlocked; you won't brick your device.
Click to expand...
Click to collapse
Why pay for something you can have: free, better, safer???
Don't CID unlock your device, it's a waste of time and money. The best solution is, IMHO, to remove the IPL/SPL parts from the ROM you want to install: it'll take you only 2 minutes! This solution is also better than CID unlocking in three aspects:
- It's free. No need to comment on this
- It's better: in a CID unlocked G4 phone, you cannot install the home-made ROMs you find in this forum (like summitter's ones or MrClean). If you cook your own ROM, on the contrary, you can install whichever 2.x ROM you like
- It's safer: if you correctly remove the IPL and SPL parts from the ROM you want to install, the event of a major damage (bricking) is highly unlikely. Even if your PC crashes or there's a power outage in the middle of the upgrade you will still be able to boot your device and to repeat the upgrade!
To remove IPL/SPL from a ROM of your choice, you can follow this tutorial i wrote: http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Johnnnnnnnnnny said:
Cool. It is exactly that, what I wont know !!
So Can I cook my own ROM for G4 and G3 device (I have Extension ROM and Splash screen). It is be sufficient translate the ROM in "nb2nbf_tornado.exe"?
For example aku 3.2 Os and my own Extended ROM and Splash Screen.
Click to expand...
Click to collapse
Yes!
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Johnnnnnnnnnny said:
Cool 2: :lol:
So I will make that ROM when I will have my device again. Perhaps I will share it if will work done
Need I the file enterbootloader.exe if I dont want to flash IPL/SPL ?
Click to expand...
Click to collapse
You need all the files in the RUU archive. Just follow the tutorial i told you about. bye
Also: CAN YOU PLS CHANGE THE TITLE OF THIS THREAD??? IT SEEMS THAT YOU HAVE A WORKING SOLUTION BUT ACTUALLY IT IS THE OPPOSITE: YOU'RE LOOKING FOR IT. ADD A "?" IN THE TITLE!
Just after I got my 8125 I upgraded the ROM to 2.25. I didn't unlock anything. Its running fine. Now I'm interested to try a different ROM. I understand I will need to CID unlock my device. Here is where I'm confused, if it is possible or not after upgrading to 2.25? Can I follow the steps to downgrade my ROM and unlock the CID?
I have searched and been reading alot but I'm still a bit confused, so please be gentle as I ask for some guidance. I have experience modifying Motorola phones, but am new to PocketPC. Any help is appreciated.
Good if you can provide info on how you upgraded your unit (e.g. with the providers official ROM or with the software and ROMS in this forum, etc)
And how you intended to down grade your ROM? You also mentioned the 'steps' to follow, of which steps are you refering to?
And, why do you want to have your phone CID unlocked? CID lock will not bug most people unless they are going for a ROM flashing. CID lock is different from `phone lock` or `SIM lock`.
Just incase you are wonder, what is CID, ... don't ask me. I have no idea at all Seriously.
I upgraded a stock 8125 (G3) to the Cingular 2.25 official ROM. I would like to install a summiter or mr. clean custom ROM. Searching through the messages here I'm unable to determine for certain if I'm able to CID unlock from 2.25 on my own (for free), but I get the impression I cannot. I just want to know for sure before attempting anything further.
I won't need step-by-step instruction...just need to know what my options are at this point.
Last nite I tried to install the summiter ROM without the bootloader. And the install went fine and completed 100% without error. But after the reboot I found the flash didn't hold, it was basically like a hard reset.
First download and install the Cingular 1.8 Rom
If that works fine then you should be able to CID unlock.
If not then try downloading and installing the "Button 1.05" Rom.
If either of these dowgrades worked for you, searck for LokiWiz (use ver 0.2 for CID unlock) and follwo the instructions.
Next if you want to SIM Unlock find LokWiz MSL 0.3 as it does a better SIM unlock than the older LokiWiz. Again follow the instructions.
Now you should be good..
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Stinkfist said:
Sorry if I wasn't clear, but its the downgrading I am concerned about. I'm not certain if it is possible to downgrade (including bootloader) from 2.25 without the device being CID unlocked..?
Click to expand...
Click to collapse
Having a G3 device you can downgrade.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
kyphur said:
Having a G3 device you can downgrade.
Click to expand...
Click to collapse
Perfect...I will try it.
You must downgrade to CID unlock unless you want to pay imei-check $40.00
Click to expand...
Click to collapse
Yeah, that much I do understand. I definately want to avoid paying to unlock.
Thanks for your help! I'll let you know how it goes.
Success! SIM/CID unlocked.
IPL 2.24
SPL 2.24
GSM 02.25.11
OS 2.24.10.1
Thanks kyphur, for taking a moment to point a noob down the right path.
hey folks. i think i need to reflash my spv m3000 because it keeps restarting and the phone is reaaaly sluggish..
IPL 1.09
SPL 1.09
GSM 01.04.10
OS 1.9.1.1
This is what i have got. i have no clue whatsoever if this rom is good or not but it doesn;t seem to do the trick for me..
i have be reading for some weeks but i am still unsure wether my phone is CID locked or not. or what rom should or can i use.
i still don;t understand the G3 G4 difference and why everybody talks about 2.xx spl and ipl and i have 1.09....
could anybody please translate all this technical details into english? i have no intention of bricking the device..so i am folowing the advice in all tutorials "if u n't know what you are doing ..ask first"
i have some more questions:
are the new roms more stable or at least faster? because this one keeps restarting randomly.
cand somebody really give me some step by step information on what i need to do?
how can i back up this original firmware..so if the upgrade doesn't work i would still be able to reflash it back
i am mentioning that the phone was sim locked and i uset lokiwiz tool to unlock it.
ftp://xda:[email protected]_US_226102_22610105_022511_WWE_Ship.exe
I would use this one, it's safe, original.
i would appreciate if you could answer al my q's..i am not ready to flash it without knowing if i am cid ocked and what is that...etc
I thought you mentioned you unlocked it.
The ROM is stable, all the posts like Beta, Unhappyhousewife etc. have thgis one as basis.
About your Backup, to be honest I don't have clue because I never had or wanted to go back.
ok. my main concern is about the 1.xx spl and ipl comaptibility. all i could find aroundhere was said about 2.xx
i am afraid to upgrade untill i know for sure what my 1.xx means in practical terms
did u have 1.xx before upgrading?
I did,yes.
Most of us start with 1.
thanx man. so without sounding stupid i will ask for final instructions.
correct me if i'm wrong.
i will have to cid unlock the devicei first using lokiwiz 2
then i will be able to use the rom u suggested?
ok so i kinda f'ed up my phone..
the specs are
IPL:1.08
SPL:1.08
OS:1.8.11.1
and i decided to flash the radio rom 2.47.11 and now it freezes when i try to enter in my password at start up..i read that what i need to do is get it into bootloader and flash a 2.x rom on it but when i try to pres the reset button and the 2 buttons on the right side it just normally starts up..also how would i upgrade to a 2.x rom..or is there any way to downgrade back to the stock radio rom? also my phone is unlocked
thanks
keith
edit:
could i downlod the RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe rom and flash that onto my phone and have it work...still cant figure out how to get the bootloader screen to come up
yes after doing some more reading i realized i had to hold down the camera button and the start button until the bootloader came up..then i just pluged it in and ran the radio rom of 1.x and it worked yea!! mbe later i will try to upgrade the rom lol
CID unlock it while it is still working with your current ROM
IPL:1.08
SPL:1.08
OS:1.8.11.1
Then stick Molskis G3 ROM on it and you will be sorted.
http://forum.xda-developers.com/showthread.php?t=274316
for more info.
woudl i be able to go to htc.com and upgrade do the rom upgrade there without havin to cid unlock?
Yes, you can upgrade a Cing 8125 with the officially released Rom (as posted on HTC's Website) without CID unlocking your device.
i do not need to upgrade the IPL/SPL first since i have 1.08?
keith1569 said:
i do not need to upgrade the IPL/SPL first since i have 1.08?
Click to expand...
Click to collapse
Official Rom Updates include the IPL/SPL. If you download and flash the Cingular 2.25 Rom you will have IPL/SPL 2.25 after the flash.
is that good or would i want to cid unlock my phone first?
keith1569 said:
is that good or would i want to cid unlock my phone first?
Click to expand...
Click to collapse
Keith,
If you plan to install cooked Roms then you should CID unlock your phone. Technically CID Unlocking voids your warranty (though I had no problems getting warranty exchange on two previous phones that were CID unlocked).
The main reason to CID Unlock is that you can then install most (generally all) Roms that exist for your device. The only exception would be a G4 only Rom (which has the G4 IPL/SPL only) as your phone is a G3.
If you don't CID unlock then you can't install non-cingular Roms that include IPL/SPL so basically you would have to cook your own Rom if T-Mobile released an OS update that you wanted to use.
I would suggest you do some more reading before you CID unlock or flash anything else to your device.
ok bro thanks for the detailed explanation. I will.def do a lot more reading before I flash my phone or cid unlock it..this is a great forum full of useful information
keith1569 said:
yes after doing some more reading i realized i had to hold down the camera button and the start button until the bootloader came up..then i just pluged it in and ran the radio rom of 1.x and it worked yea!! mbe later i will try to upgrade the rom lol
Click to expand...
Click to collapse
Where did you get the radio rom from ????? Do you have a link ????
just type in 2.47 radio rom in a search
keith1569 said:
just type in 2.47 radio rom in a search
Click to expand...
Click to collapse
Ok i'll search for it thought maybe you had a direct link lready ....
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
As written before, u need AKU 1 to CID unlock your phone..the only way to be sure is to unlock again. Use buttons rom.. downgrade to that... unlock the phone.. install the rom again so the IPL and SPL are the same..then you can switch to whatever rom you want. How ever, you havent shown what type of Wizard you have whether its a G3 or a G4..the above method is what i used for my G3 Wizard
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Bonusbartus said:
Hi,
I have a dutch HTC wizard/qtek 9100, with the AKU 2 NLD ROM.
I tried CID unlocking but noticed that didn't work with AKU 2,
Is it possible my phone isn't cid-locked? Is there a quick way to check?
How can I downgrade to an older rom version and what file should I use,
I tried this one: "RUU_Prodigy_1030710_110_10410_Qtek_NLD_Ship.exe"
but after restarting my wizard and loading the bootloader the update program gave an error claiming that it can only UPgrade to newer versions...
I suppose I cant use the wwe version or can I?
well, thanx in advance,
Bonusbartus
Click to expand...
Click to collapse
1. Thank-you for posting in a new thread and not in a ROM release thread.
2. Do you have a G3 or G4 (what is your IPL/SPL?)
2a. If you have a G3 read the Sticky post The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards.
2b. If you have a G4 log onto the IMEI pay site (links all over the place) and pay to get your phone unlocked.
3. IF you have a G3 rom you must downgrade to CID unlock. It isn't possible to CID unlock from AKU2 or higher (read the sticky, it tells you what you need to do)
4. The best thing to do if you are unsure is to just repeat the unlock procedure. It won't hurt a thing if you are already unlocked, but will unlock you if you are locked.
5. Don't do anything flash related until you know for sure, beyond a doubt which version of Wizard you have (G3 or G4) If you have a G4 and use G3 procedures you WILL most likely ruin your device.
6. You won't get this error if you follow the steps in the correct order from the upgrade guide.
7. Good Luck
Bonusbartus said:
I have a g3 wizard,
so I can use that rom, I don't need a dutch version or something else?
Click to expand...
Click to collapse
With your G3 just follow the steps, in order, from the sticky and you should be able to end with whatever ROM you choose. Some of the steps may not make sense but, they are necessary and prevent common issues if followed correctly.
Well, I do have a G3 so I can follow the tutorial,
ipl and spl are 2.18,
only question left, CAN I downgrade to the wwe rom in the tutorial? that's what I wanna know, because I now have a nld rom, can I flash to the wwe rom in the tutorial without CID-unlocking?
well I think I just try
thanx
oh btw, any recommendations on which rom to flash to after unlocking? and I saw something about radio only roms and page-pools what would u recommend there?