I use T-mobile, and I tried to run their ROM, but gave me an error saying "Invalid Vender ID." What do I do?
I have the following:
IPL: 2.16
SPL: 2.16
GSM 02.07.10
OS: 2.16.9.1
Please tell me what I have to do upgrade ROMs...I've already ran the CID unlock wizard thing.
Do I just get one of Molski's ROM's and run it? Where do I get the GPRS/EDGE cabs? I can't seem to find step by step directions anywhere.
Related
I am having a weird problem. I am unable to reflash back to the stock cingular 2.25 rom you get from the htcamerica.net site. Here's what happened. First of all I started off with
ipl 2.25
spl 2.25
GSM 2.25
OS 2.25
I was interested in istalling Faria's Aku 3.2 rom, So I downgraded to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE then I ended up with
ipl 1.01
spl 1.01
GSM 1.12.10
OS 1.5.4.2
Then I CID unlocked the phone with lockwiz 02b. Then I installed Molski's RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2, which gave me
ipl 2.26
spl 2.26
GSM 1.12.10
OS 1.5.4.2
All seem to go well when I saw molski's flash screen, and his ext rom installed. But I was skeptical when I saw the GSM and OS still at 1.12.10, and 1.5.4.2 respectively. Anyways, I figure thats the way it should be. So then I tried to Flash Faria's FARIA-HTC-WIZARD -3.2-RC1-8MB, but nothing installed but the flash screen. The ext rom tried to installed but ended with a "windows cannot find autoconfig.exe" error. After several attemts I gave up and try to reflash back to the stock 2.25 Rom, and I am getting a "Upgrade error, invalid nbf file." Well something like that. Anyways, after several attempts, its a no go.
So what do I do from here. Do I start over with the downgrade rom and make sure that it was CID unlocked then start over again, or is there a step I am missing.
Ok, I figured it out. Finally. Apparently lockwiz 2.0 didn't CID unlock the device correctly, so I tried using lockwiz 2.0b and it Correctly CID unlock the device. I have finally been able to flash Faria's AKU 3.2. Yippeeeee.....
I was using the Custom RUU Wizard 1050412 WWE 101 11210 WWE to downgrade my Cingular 8125 and after flashing the ROM information reads as follow on the boot screen
IPL: 1.01
SPL 2.26
GSM: 01.12.10
OS: 1.5.4.2
Why is the SPL still at 2.26?
shouldn't it go back down to 1.XX
DID I BRINK my fone??????? This is really pissing me off
You nice folks out there please help. I want to upgrade to the pdamobile 3.0 with crossbow icon ROM. Thanks
I wonder why there's a STICKY on top with READ FIRST.... Step 16 seems familiar too me.
Hi,
I read the sticky, unlock cid unlock reflash the rom to 1.XX twice and still the SPL is showing 2.26. Any other suggestion.
Run it twice and it will downgrade to the 1.xx on both ipl and spl. I did this yesterday. if your going up to the 3.3 eventually make sure you flash to a 2.XX before going full fledged 3.3. I thought I bricked my **** yesterday too, but luckily with the help of a few nice people on here, i got it worked out.
Hi,
I ran it 3 times with no luck. I don't know what I'm missing the IPL is at 1.01 but the SPL is still 2.26. Now when I ran Lokiwiz 2b for the Super CID unlock I get error message, file too big. Help. This is driving me nuts
try reflashing the 1.xx twice, then doing lokiwiz, are you using the right lokiwiz? I'm no pro, but maybe that will help?
and did you copy the enablerapi file?
which lokiwiz version u are using I used 2b and 3
I used 2b, did you copy enablerapi?
Hi all. Tried and tried in vain, to replace the T-mobile splash screen, only to find out that the phone is CID locked.
Managed to upgrade to WM6 though, thanks to vlodeck and nocturne.op.15
Here's the phone details:
IPL: 2.06
SPL: 2.06.0000
GSM: 02.19.21
OS: 10.2.0.8 (WM6 by vlodeck & nocturne)
Oh, and also worth mentioning, my PC is running on Vista Ultimate, on which RUU's don't work. But some people said that if I install VMWare Virtual PC and install XP on that, RUU works through it.
So, how to unlock CID of this phone?
Wish I knew!
I'm in the same boat, so please can someone advise, thanks.
to cid unlock to need a ver. 1.xx of ipl/spl. And seeing you have 2.xx you cant really downgrade to ver.1.x
but can you told me whats rom have ispl ipl 1.x??
ok so saying you have ipl 1. what ever how do you cid unlock?
ftp://[email protected]/Up...er_1120223_11202110_11220_T-MobileUK_Ship.rar
will have ipl and spl ver 1. wherever you can get to install or not, might work with a noID ruu. then you can use lokiwiz2 to unlock the CID
There are rom versions that have 1.xx IPL and SPL but from my own experience I know, that once you upgraded to 2.xx or more, you cant get back to 1.xx. The most you can get is 1.xx IPL and 2.xx SPL.
Cheers,
vlodeck.
So, What ROM we must flash? To have 1.xx IPL and 2.xx SPL?
Maybe offtopic, but I have another question: If I have ROM from ERA GSM POLAND can I flash AKU3.3 TMobileUK ROM?
Charmer community is so small.... ;(
adexxx, you misunderstood me. You can't get 1.xx IPL and 1.xx SPL once you've already upgraded to 2.xx.
If it's an official ROM then you can flash it no problem. If its a custom ROM, use the tool I described in WM6 charmer thread.
When I tried to update with RUU: RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship it showed error: INVALID VENDOR
What I'm doing wrong?
use wizard noID upgrade utility. it's some around here, maybe even in charmer forum.
OK, I flashed and it works fine.
Now I have 3.0 IPL&SPL, my 1st splash was changed.
[offtopic end]
IPL 1.08
SPL 1.08
Radio Ver. 10.9.10
ROM: 10.1.0.811 WWE
Protocol Ver. 4.0.13.20
Windows Mobile Center 6.1
i seem to have done pretty much everything at this point and it just wont seem to upgrade.
the wizard update tells me ERROR 240: File Open
the others just seem to keep getting stuck on bootloader. i tried using the wizard tool but it keeps saying that "Error! No device detected!". also used EnableRAPI still no help.
Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
kimb0 said:
Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
Click to expand...
Click to collapse
Flashing and upgrading a Radio Rom is not much of a difficulty,just download the Radio Rom of your choice,attach the phone with pc via usb cable and run the RUU application in the Radio Rom,it hardly takes one minute or two to get flashed and complete.Check out the Radio Roms in the forum of your choice or read the 'wiki'
Cheers!
thank you
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
kimb0 said:
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
Click to expand...
Click to collapse
Flashing or upgrading just Radio Rom doesn't require CID unlock,Its not an OS,it doesn't include any IPL/SPL in it,it just upgrades the GSM of the phone,which is not integral part of any Rom (OS)
Yes ! sometimes the upgrade utility do not show the details of the Rom its flashing,it doesn't matter,just click for upgrade,it'll start the process.
Cheers!