Hi i have huge problem with my wizard.
Well i bought MDA Vario in germany so WM5 was german but i dont understand german (well maybe , ja and nien ) so i discover this site .. very nice and full of information but when i did a search and i didt find similar problem so here is my problem.
I updated my phone with Qtek_9100_1_6_7_ENG__OS_ONLY and now every time i power on the phone i see (three color) display and some text IPL 2.21.0001 and SPL 2.21.0001 and thats all (when i connect USB i see text in bottom left corner - USB).
If i want to update with for exmple:AKU_3.2_by_ell_3.32.2 my update goes to 99% and thats all (Update tool on PC is 100%).
And when i take the battery out and in again i see three-color display again :S.
What software do i need to use to get my PPC (MDA Vario) working again?
Can i fix this problem my self or i need to take it to the profesional repairman?
Thank you all for your replays.
Some info:
IPL: 2.21.0001
SPL: 2.21.0001
WIZA200
T-Mobile MDA Vario
P.S: Sorry for bad english and mistakes in writing.
PapaDOC said:
Hi i have huge problem with my wizard.
Well i bought MDA Vario in germany so WM5 was german but i dont understand german (well maybe , ja and nien ) so i discover this site .. very nice and full of information but when i did a search i didt find similar problem so here is my problem.
I updated my phone with Qtek_9100_1_6_7_ENG__OS_ONLY and now every time i power on the phone i see (three color) display and some text IPL 2.21.0001 and SPL 2.21.0001 and thats all (when i connect USB i see text in bottom left corner - USB).
If i want to update with for exmple:AKU_3.2_by_ell_3.32.2 my update goes to 99% and thats all (Update tool on PC is 100%).
And when i take the battery out and in again i see three-color display again :S.
What software do i need to use to get my PPC (MDA Vario) working again?
Can i fix this problem my self or i need to take it to the profesional repairman?
Thank you all for your replays.
Some info:
IPL: 2.21.0001
SPL: 2.21.0001
WIZA200
T-Mobile MDA Vario
P.S: Sorry for bad english and mistakes in writing.
Click to expand...
Click to collapse
You have G4 Wizard (IPL/SPL like 2.x.001), so you can only flash ROM without IPL/SPL. And now you can see bootloader (utility for flashing ROM). That ROM, you used, is not for your device, that's why you can see bootloader now. You need rom without IPL/SPL. ELL's ROM AKU 3.2 is very unstable, and it is not for your device too, don't use it. I can recommend Molski's ROM - www.molski.biz
SO, what to do:
1. download new ROM - http://www.molski.biz/downloads/roms/RUU_Molski.Biz_226102_22610105_022511_G4_WWE-30MB.exe - it is ROM for your Wizard.
2.Turn on, your Wizard - you will see your "three colors" screen - bootloader
3.Connect your Wizard to usb cable and start flashing. It will stay at 98% for a few minutes, don't disconnect it.
This ROM works fine. Give some feedback, after flashing this one.
Yes.. uff now its working again.
Tnx M8 and like i said before, great forum .
Damn g4 and g3
Have a nice day, and good night (here is 1:12 AM )
pDOC
WORKS? Fine. I'm glad, I could help.
btw, I have the same time as you have
Jst One little question.
Is there a list of G4 Roms available?
I know for FPT of XDA but some roms are not labled G4,or G3.
So wich ROMS are for G4 Devices.
Have a nice day and thank you.
pDOC
If the rom is not speciffically labeled as g4 then it is a g3...g4 is relatively new stuff so in the old times roms where not separated in g3/g4..
as is said above i would recommend molski's ROMs ive had 2 of them both excellent and highly stable and he clearly labels them so if u need to upgrade its obvious which file u need
No, there is no list of G4 ROMs (I think) You need ROM without IPL/SPL.G4 Wizard is IPL/SPL like 2.x.001, and G3 like 2.xx. So, you will have to look for ROMs without it. But Molski's ROM is one of the lastest, and works fine. If you want any other ROM, try to search here, but on ftp there is no list of ROMs for G4
Related
DUE to the first thread been turned into another unlocking one I had no choice but, to close the project.
But I feel that it is unfair to the people that respect my work an appreciate it.
The response to the rom has been overwhelming!!!! I never see this kind of response to a rom since the blue angel days
once again this thread been trashed with crap.rom is no longer available.next realease is pending.got better things to do with my time.plus time job is takeing most of mine time now and with x-mas coming,gonna get worst. when im ready i will contact the testers.no more tester are neede at the moment.
if you experience power-ups with push email folow.this;
now for users that have the device powering up when push email activated,i have been doing some testing;
i setup my push email [web2mail]
now i have setup the device security with a password,so when it comes from stand-by,will ask for it,
then a setup devicee lock in batterie status to also lock the device [see pictures]
what can i say i works fine.
when i receive an email from my server ,it notefys-me with the email sound ,but the device does not power up as reported.
now when the device lock time out is up,the device wakes up to lock itself
and the powers down in 1-2 seconds -this is normal in this rom atleast.
how to the date in the top right corner ?
use registry wizard[included in the rom] to remove the date or time
to use default clic sound download the file below
remove the .zip from the file name as it's just a cab...thanks dr.p
whats is in my rom?
unlcoking problem
people don't get it and it is really easy to unlock CID if they really follow the threads that there are. This thread says it clearly what u do and it is really easy to do it. Most of the people have update tool problem they can solve that with wizard_ROM update utility_noID file on the FTP site of the XDA. They can just put it to the unpcaked faria RC1 file and run it after unlocking CID. Two steps simple and cristle clear !!
http://forum.xda-developers.com/showthread.php?t=263116&highlight=CID+UNLOCK
/APPLAUDE
Just wanted to thank you for everything so far. Loving the ROM and will continue to provide Beta feedback as much as possible.
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
bigdooky said:
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
Click to expand...
Click to collapse
how much did you overclocked?
LOL!!!
faria said:
You my requested the rom from me but I will select you according to your posts.
Click to expand...
Click to collapse
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Portuguese Support
I faria since i`m new in this all new stuff of cooked rooms and extended roms etc; all that i can do is asking how can i help you on your journey, just tell me how i can donate you something for you to continue the great job that i have the oportunity to see in this forum i will be pleased to help with anythig to honor your Portuguese contribute to the XDA, continua o bom trabalho e ficarei a aguardar pelo "lançamento" da tua nova room EXCELENTE TRABALHO.
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
I hope your donations will provide you with at least the ability to take a night off and go to dinner or maybe get a massage to help you forget the newbie questions. I will be sending a donation as well. You have provided an outstanding ROM that has rivaled (and beaten) multi-m(b)illion dollar companies core and "upgrade" roms.
To all those that wish to ask newbie questions, leave faria's threads dedicated to the enhancement and ultimate release of one of the best ROMS for a PPC phone alone.
The least you could do is create your own thread and post your questions there.
I hope I may be considered for future testing granted my moderately new questions have not been classified as non rom related. If so, I will go study some more and apply to faria U at a later time
G4s and the ROMs
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
First and foremost I would like to thank Jose for all the time and effort that he put into making this great rom. If and when you come to NYC I am taking you out and getting you twisted VIP style! But enough ass kissing and lets get to bussiness.
I have had very minor issues.
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
After installing all the software extras that was included to check how they worked, I have not been able to keep the phone off. When I say off I mean the backlight staying off when nothing is running. I have tried using the XP feature to turn the light off but it doesnt keep it off either. This could be something that I did so I may just reflash and install everything one by one to see where the problem comes from.
I also have noticed some signal problems but I think that was more of me installing those cabs from the 2.26 rom
Any help is appreciated.
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
peraltah said:
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
Click to expand...
Click to collapse
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
appreciated
jacob-mda said:
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
I didnt delte it I just ran the other cabs from 2.26 and soft rest it. I think thats where my signal problem came from. I have to reboot to get my signal back.
monadzback said:
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
Click to expand...
Click to collapse
i see a patern emeging here the voice mail/phone buttons seems to be an american thing.now i tryng to find out if its a carrier specific thing.
cptcafne
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
Click to expand...
Click to collapse
please contact-me privite go somethig for you .
Timbo_fdw
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
Click to expand...
Click to collapse
that app has problems in 3.2 roms.
Originally Posted by peraltah
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
please provide the rigth cab files for the next update.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
im afraid you phone still locked
now put it int bootloader mode and run the latest rom from your provider.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
when u downgrade then upgrade with a 2.26 ROM (IPL , SPL) like moliskis and then upgrade to farias and it will show u
IPL=2.26
SPL=2.26
OS=3.000
jacob-mda said:
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
Click to expand...
Click to collapse
there is a fix for that in page 7-8 in the old thread
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Last edited by appye : Today at 10:45 PM. Reason: I am cool like that.
Click to expand...
Click to collapse
nice try.but no dice
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Jmavatar said:
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Click to expand...
Click to collapse
With activesync on it will say it won't detect the phone plugged in while it's in bootloader mode. Run the ROM update anyway.
Thanks, but it doesn´t work. The Rom software said that is unable to connect with the phone.
I just tried to install the vanilla WM6, and with zhis rom, the installation could begin, but at 95% it happen an error... and i need to reinstal an other time the vanilla WM6.
I tried an other time, but the same error on 95% :-( And i can´t instal others rom.
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
bbobeckyj said:
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
Click to expand...
Click to collapse
Thanks a lot for our support! I still tnhinking I have a brick :-S... Now It only apears the bootloather screen(three colors bars) due to the incompleted vanilla WM6 uppdate.
I think the CID is unlocked. I runed the Lokiwiz, but now, I am not sure if It worked... And now, the phone is without battery!!
Where I can find my original rom? The device is from T-Mobile and is a MDA VARIO. From Austria. I have 2 CD´s, one with windows 5 applications, and other with software... I can´t fin the rom.
Thanks a lot!!
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
bbobeckyj said:
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
Click to expand...
Click to collapse
Thanks a lot!! But it doesn´t work. Error[294] Invalid Vender ID :S
I can charge the battery with the normal charger to 220v.
Any idea??
My IPL is 1.06
and SPL 1.06
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
bbobeckyj said:
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
Click to expand...
Click to collapse
I bought yesterday on a T-mobile shop from Austria. I downloaded it´s roms... but the same problem.
I will carry the device to the shop...
Thanks a lot!!
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
bbobeckyj said:
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
Click to expand...
Click to collapse
Thanks again, but I returned the phone to the shop. Something didn´t work since the beginning. Tomorrow I will reveive a new one...
Thanks an other time!
Hi,
I got a similar problem.
I wanted to install the latest AkU 3.3 on my MDA VARIO but it stopped at 95%.
So I tried to install the oldest version available from T-Mobile Germany.
But now my device restarts again and again.
It says
IPL 1.06
SPL 1.03
OS 2.24.2.8.
and restarts.
Sometimes (with the oldest software version) I can calibrate my touchscreen and then the device installs the T-Mobile software. After that it restarts again and again.
I also tried softrest after the message: in 3 seconds .... software will be installed. Then it reboots and sometimes wm5 starts but is running VERY slow. I can't switch it off using the power buttom.
I unlocked my MDA Vario using Lokiwiz. No CID Unlock just Unlock.
What can I do?
Thanks in advance
very simple, flash back to your original rom, then, CID UNLOCK
my t-mobile mda compact got hanged at the bootloader mode(3 color mode) while upgrading to wm6 rom.i had done everything as told in vlodeck's thread about upgrading to wm6.but got stuck in 3 col mode.also tried to glash it with t-mobile official rom.but its giving me an connection error while upgrading.my 3 color mode displays only following text
IPL 2.06.0001
SPL 2.06.0001
PLZ PLZ HELP ME GUYS iam a newbie to this forum.plz plz plz guide me to get it back to my wm5 today screen.i had seen xda-dev's solving problems of many members.plz solve mine as well
can you explain more? what happen after u got stuck while upgrading to wm6? then what did u do when u trying to flash it back to wm5?
i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can
did you try tmobile orginal rom?there are some orginal tmobile roms on xda-developers.you can find link in this forum and try them.they should work.how do u know your battery is %96?is your wizard opening correctly?also wizard rom has omap be sure overclock status isnt active,also download latest active sync.if already installed uninstall and install new version....i hope you will be able to fix..cheers
First Download the Base rom from below given locations..
T-mobile UK
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
T-mobile US
http://www.t-mobile.com/wmupgrade/
Search for the original rom for any other
instructions on how to use the original rom can be found here
http://support.t-mobile.com/knowbase/root/public/tm23294.htm?&A2L.SERVICE=AboutUpgrading
Before your do this charge your phone full using.. power adoptor. first..
then put it in bootloader mode..( 3 color screen ) then install above rom.
hope this solves your problem...
mayur9890 said:
i tried to upgrade it with wm6 from wm5.it got stuck at bootloader mode givin the above info(ipl....)i tried the wizardlove rom.it did worked,but with no sound and constant battery error even if my battery is 96% charged.what should be done to it now .and fikri bhai,thnx a lot for ur concern.guide me more if u can
Click to expand...
Click to collapse
your device are G3. have you cid-unlocked your wizard? i would suggest you to flash your wizard to its original rom. then we'll work from there if the problem is still there. goodluck
hey nasir what r u saying.i thought my device was g4 as per the g4 thread.& i was making the attempts to flash just like the g4 thread.plzz clarify all u guys is my device a g3.coz i read somewhere that installing a g3 rom on a g4 bricks the device totally .
plz plz reply to me guys .iam in a bigbig problem
Your device is a G4. You gave your IPL/SPL as 2.06.001 which is a G4 if it were a G3 your IPL/SPL would only be 2.06. You aren't doing anything wrong by following the G4 directions.
A *G3* Wizard will have the following:
IPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.).
_SPL: 1.xx *or* 2.xx *or* 2.xx.00x (Note that this version only has *TWO* 0's.)_
A *G4* Wizard will have the following:
_IPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
_SPL: 2.xx.000x (Note that this version has *THREE* 0's.)_
Click to expand...
Click to collapse
from wizard wiki. ur device is g3 since your
IPL 2.06.001
SPL 2.06.001
note that there are only two zeros.
regards,
fikri
iam really sorry fikri bhai.actually I didn't posted the correct info.I checked it 1nce again and it was like ipl & spl both are 2.06.0001.thus clearly its a g4.but iam still not able to get the correct working rom on my piece.now iam getting totally frustated with roms.only the wizard love rom is working & that too with no speaker sound and 0% battery error.even when the led shows green light
have you tried official tmobile AKU 3.8 rom? i find it very stable and fast. if you have tried many roms and the problem still persist, sorry, i have no idea to help you. all d best
regards
Hi Mates i have Imate-K jam wiza200
last night i planned to upgrade it. and downloaded the ( See No Evil V2.0 ) WM6 Rom.
i started the upgrade process. and it stucked at 99% and now when i start my device its only displaying 3 colour texture screen and only written.
IPL 1.06
SPL 1.06
and now its also not connecting to any usb. but when i put the usb. the usb label appears on the bottom left corner of my device. so please suggest me which rom i will use to fix that problem.
Regards
Unlock First - you must read the forum!!!!
You have to unlock your Wizard please read the firts thread
[READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
ruk_design said:
Hi Mates i have Imate-K jam wiza200
last night i planned to upgrade it. and downloaded the ( See No Evil V2.0 ) WM6 Rom.
i started the upgrade process. and it stucked at 99% and now when i start my device its only displaying 3 colour texture screen and only written.
IPL 1.06
SPL 1.06
and now its also not connecting to any usb. but when i put the usb. the usb label appears on the bottom left corner of my device. so please suggest me which rom i will use to fix that problem.
Regards
Click to expand...
Click to collapse
You need to CID unlock AND you need to upgrade to an official 2.xx rom BEFORE flashing a WM6 upgrade as they don't contain IPL/SPL and you will have all sorts of issues flashing a 2.xx or higher os into 1.xx bootloaders.
And I would suggest at the very least reading all the sticky posts in this forum before you continue with your flashing mission, it will save you from some unnecessary stress and anguish over why your device isn't responding to a flash the way you wanted it to.
Is my K-Jam totally bricked?
It is now stuck up in bootloader screen.
I am able to swtch it off with power button. I can also have first flash screen.
On connecting with USB port, it shows yellow light indicating that it is charging & that over a period of time, goes green.
Earlier I had flashed TNT ROM but while reflashing newer it got stuck up as after flashing, I tried to hard reset [mistakenly thought ROM is flushed fully] & could not go further after initail first screen.
Other details:
IPL:2.16
SPL:2.16
GSM:02.07.10
O.S.:11.0.0.2
May some one help?
Thanks in advance.
Virat
Nopes ! its not 'Bricked' just had a bad flash. As long as it gets into bootloaders ,its perfectly safe. Perhaps,your phone is not CID unlocked ?
Download the official carrier's rom from its website and flash it in the bootloaders,it'll start to work fine.Then read the guide to cid unlock and upgrade.
Cheers!
boot issues
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
ghumanfly said:
hi
i am having serious problems with my kjam.i installed black diamond's rom and now my phone boots upto the splash screen where it shows window mobile 6 and gets stuck there.
i have tried a soft spl, but it doesnt help as the phone cant connect or move from the splash screen.also, i can make call or do anything with the phone.
can someone assist me and also point me to a place where i can find the lastest tnt rom.
Click to expand...
Click to collapse
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Thanks but solution found while reflashing in XP
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
virat said:
Thanks for the reassurance Zabardast. I cold not even reflash it with vista but in xp, it sailed smooth. It is working normal now. Any way, thanks again for responding.
Virat
Click to expand...
Click to collapse
Thanks !
Glade you got it working
Have a nice day !
zabardast_1 said:
Always post vital data of the phone,which is your device G3 or G4.Have you Tried Soft Reset or Hard Reset.it sometimes help.
Well,if it's a G3,is it SIM/CID unlocked,cuz its required to get the phone CID unlocked to upgrade to wm6,but if its a G4,then use method 'SoftSPL' or 'HardSPL' as it cannot be CID unlocked.
Post IPL/SPL...? of the phone here.
You can find all the latest wm6 Roms in 'Wizard Mobile 6' forum.
Cheers!
Click to expand...
Click to collapse
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
ghumanfly said:
Wireless Carrier
Vodacom
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
Roms tried
BlackDiamond 3.1
i am running XP SP2 on my notebook.
i have restored the original WM5 rom however my screen is now fuzzy.
Click to expand...
Click to collapse
'Hard Reset' the phone,hope it'll work fine.
Well,I assume,you cudn't do the SoftSPL correctly the first time,try to apply the SpftSPL again correctly,if it works,ok,otherwise you can upgrade to wm6 with HardSPL method.
ba salam khedmate aghaye zebardast
duste aziz man ppc imate kjam daram ke eshtebahan soft spl kardam va rom wm6 prophet rush rikhtam ba tavajoh be inke seri gushi man g4 wizard bashe (ipl&spl 2.16.0001) kholase gushi alan tu safeye avali ke windows ba yek logo az rom marbuteh miad bala gir mikoneh .albateh 2 ta rom kjam asli wm5 ham gir avordam rikhtam vali hamunjuriye albateh jaye shokresh baghiye ke gushi tu halat bootloader gharar migireh va hard reset ham mishe. lotfan be man komak konid ta moshkelam ro hal konam. ba tashakor az shoma
could you please ,solve my problem kjam g4 wizard
laike salam brother
thank you very much for direction. I want to answer your question:
Quote:1. Which was the original official rom running on the phone before you tried to upgrade ?
1- I think wm5 belonge to 2005 becose it is written under the battrey.
Quote:2. What was the original wm5 rom and IPL/SPL of the phone before ?
2- I couldent remember but this phone approved by uaelab company [TA-2005/453 approved][E05/14/40225/g]and I flash with different official rom which you mentioned at ftp://ftp.clubimate.com but nothing happend ,maybe I do somthing wrong.
Quote:3.What exactly you mean you copied jumpspl to the root of the phone,did you applied SoftSPL ?
3- yes correct I did softspl with whit coulor screen then connected to pc and did toast that .
also I have problem to connect wst 4.2.2 to my ppc.
I download it and run, but the software couldent detect my fhone I dont know why .I connet it from bootloader 3coulor but nothing happen and so on.
could you please to explain how can I work with wst 4.2.2 also very important how to connect that because it says I have to connection with activesync .
pls direct me pls
mamnun
kourosh