I've installed Softick Card Export II v2.12 in order to get a useable mass storage device.
There was a message that I should not run Card Export before I soft reset device, which I did.
BUT, big but, there was O2 logo, then WindowsMobile logo and then light turned off..five minutes later the Windows logo was still on the screen and my Wizard cannot boot up system completely. Holding Power button doesn't do anything,so I had to press that small Harr reset button. I tried one more time, leavin the phone on for 15 minutes, but the story was the same..Windows Mobile..and nothing else. Even keyboard and green/red button stopped being lit.
I can hear on my speakers that the phone is working (electric iterference).
I thought I could just put new ROM over it, but then saw that I need a working ActiveSync connection in order to do that.
Please, does anyone have an advice on what to do?[/url]
Any 3..4..5 button-combinations that could reset the device and format internal memory?
Hold VoiceDial + CommManager button and press the soft-reset button, then press the Send button (Green button) to hard-reset your device.
Why did you install v2.12 because v2.17 is already released?
It's better to install WM5torage 1.60, it does the same and is freeware and works A LOT better!
Thanks a million!
ok this is scary
i cant hard reset
I know!
wiki said:
BlueAngel WM5 For Beginners
Hard and Soft Reset and screen types
How to Hardreset a WM5 BA device
Doing a hardreset is easy if you have 3 hands - you have to press camera, record, power and reset buttons simultaneously! Or what I have found also to work is softreset and then as soon as you see the Strips hold Camera and Record. If this worked then you will be a debugger screen (something about KITL), reset registry and format built-in storage. Navigation in menu is done with camera and record buttons, exit - "mail" button.
You will know if you have performed a hard reset if you are lead through the setup of your device section. All else is just a softreset.
How to Softreset a WM5 BA device
Use the old way Power and stylus in the bottom
Click to expand...
Click to collapse
But This is there i get my problem
wiki said:
What is this 4 colored screen with writing at the top
You have got yourself in the Hardreset boot screen and you are given the option to format storage, its in the upgrade so read it again
Click to expand...
Click to collapse
I get no such thing it does a normal soft reset, i press power and reset thing hole thing at the bottom, and yes i am sure it presses it coz i so feel it and it does normaly do a soft reset, but i cant achive a hard reset.
Here you go:
Do a normal soft reset - hold power and reset with stylus. The moment the screen flashes and before you see the loading screen of Windows (you must be fast - it takes 2-3 seconds and then you're late), press and hold the Camera and the recording button (the two buttons on the left side) until you see three lines with text and YES or NO next to them. I guess you were not very fast and that's why you were not getting the 3 lines with text. I just did that yesterday after my upgrade and it works fine.
When you get these, follow the rest of the instructions from the wiki.
TY......
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
hi, please! need help... after I've flash the
Wizard_Love_2.26.10.2_WWE_Novii_CF2 on my G3 device the rom is very slowly and my PC doesn't recognized my wizard when it connected with the USB cable.
any solution how can I change this rom?
many thanks
i can go to the tri-color bootloader mode, is it say somthing?
mine did that yesterday....maybe try a hard reset:
Hold down the Comm Manager button(top left) and Voice Command button(top right) buttons while performing a soft-reset (depress the reset button using the stylus); after you depress the soft-reset button, [contintue to hold the two side buttons] hold down the navigation pad for ~4 seconds until you are prompted on screen [you can release the side buttons now]. Press the Send (Talk) button (i.e. the left telephony button) - or whichever button your system prompts you for.
That's what I did and it worked for me =)
thanks but it doesn't work, the main problem is that after the hard reset the rom is very very slowly (like 7-8 seconds from the moment you tap the "start" till the start menu come)
the PC doesn't recognized my wizard so i can't change to another rom....
I can get into the tri-color mode, does it say that maybe it's not bricked?
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Lasarus said:
My x1 is stucked with sony`s start logo.
I`ve done a hard reset.
I can`t connect it with Wm center.
What can i do to solve the problem?
Click to expand...
Click to collapse
try this:
read all steps first
turn off phone
pull out battery wait ten seconds
put battery back in (leave cover off)
hold the power button + hold volume down
press the soft restart button* (while still holding the power button + volume down)
keep buttons held down till you see the white screen and green logo.
note* push the button with stylus it is hidden under where the stylus goes in next to the camera.
plug into the computer and run SUES it'll say already have latest version update anyways? click yes
i had to do this when i bricked my phone, (my computer crashed while i was doing the update) it really saved my day.