262 update error always... propably preproduction device... - HTC Breeze

Hi all. This is my first post here and I'm sure i need your help.
I write from Poland - I work as a clerk in one of warsaw hotels. Few months ago we had few groups coming
(mostly from US), and someone left a HTC Breeze in hotel lobby. Few months passed, nobody asked for it... and I recieved it as a finder.
I have only main unit - no battery charger, memory card, headphones etc. I can charge it trough miniDisc USB cable, and ActveSync works trough it perfectly.
Problem begins when I try to update ROM on this device.
Menu Start / Settings / About shows this:
OS 5.1.195 (Build 14928.2.2.0)
Radio Version 0
RIL Version 2.002
Operator/Manufacturer/Microsoft/Language/File System: 5.1.195.14928
Menu Start / Settings / System Information shows this:
ROM version: 0.94.00 ENG
Model No.: BREE100
Protocol version: 32.23.50W
Radio version: 0.92.00.00
ActiveSync connects without any problems. In Menu Start i have DEBUG folder and inside Regeditor, so application unlock is possible and very easy. I downloaded 2 ROM updates:
-1- dopod 1.15.707.3 WWE
-2- i-mate SP JAS 1.15.301.0
When i try to flash device with any of them it finds my device, restart it in 3-color screen. After that i see information on host PC that operation will take around 25 minutes, screen on smartphone changes to "0% Upgrade Image Completed" and host PC show "262 Update Error"... thats all i can get.
After that i can restart smartphone (battery out) and it will restart in 3-color mode. Now I can either:
-1- run RUU once again and it makes same progress and stops again with "262 Update Error"
-2- or disable ActiveSync, run mtty.exe and type first USB command, then "set 14 0" and device will restart back to windows mobile like it was before running RUU.
Thats what i found in ruu.log on c:\ partition:
20:01:01:812 [msg] : Version : [5.10 - 20060412].
20:01:01:875 [msg] : Current in CE Mode.
20:01:06:140 [msg] : Device ID is Special .
20:01:06:140 [msg] : Device BL VER : [] [].
20:01:06:140 [msg] : =============================================
20:01:06:140 [msg] : START GetNBHInfo !
20:01:06:140 [msg] : END GetNBHInfo !
20:01:10:859 [msg] : Ac Info : [1] [50] [60].
20:01:10:859 [msg] : Check Ac in CE mode. AC : [1]
20:01:10:859 [msg] : IsBL. BL : [0]
20:01:15:171 [msg] : Enter BL OK.
20:01:19:234 [msg] : Disconnect ActiveSync .... [2]
20:01:19:234 [msg] : Start Get Connect Port.
20:01:19:375 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
20:01:27:015 [msg] : Device ID is Special .
20:01:27:015 [msg] : Device BL VER : [1.00] [].
20:01:29:015 [msg] : =============================================
20:01:29:015 [msg] : START UpdateNBH !
20:01:30:265 [msg] : Upgrade 1 : 0 Start.
20:01:31:093 [err] : Receive Data Error : 0x608, 0x30303052.
20:01:31:093 [err] : Write NBH Data Error.
20:01:31:093 [err] : BL UpdateNBH Error.
20:01:31:093 [msg] : START UnInitialization !
20:01:31:109 [msg] : END UnInitialization !
Click to expand...
Click to collapse
First i think this is US preproduction unit - it was in our Lost and Found office few months, and Mteor is shipped to europe right now so i believe it have to be this version.
Second - I was trying to update CID on it with SPV-services, but it gives me error "Invalid Storage Manager header" and thats all i can get.
Info about BootLoader from mtty.exe:
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: B, Bootloader Version : 1.00
Built at: Mar 9 2006 16:10:46
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x8
Main Board version=0x4
Click to expand...
Click to collapse
I have no idea what to do next. I dont have a memory card and i dont want to buy one if it will not help to update this rom (i will need to spend money on other card type for other phone if i cant update ROM on this unit). No idea how to get this update to work and if anybody can help me with it, please post in this topic.
<<< Artinu >>>

Related

[Q] Need Help Radio update fails

Hi
My xda2i displays no gsm on boot.... I have tried:-
Updating the roms (various - all give 114 error)
The only way i can update (get the pda operational) is to run the update without the radio ROM.
Ive updated by starting the boot loader (and without)
could it be that the device is locked ? or a hardware fault (& how can i check) or has one of you genius types out there have a fix ?
Had a good look around - and it seems that a few people have had the same issue but no definitive fix.... Any Ideas ????
Please help me the nk.nbf and ms.nbf files are upgrading but radio stack upgrade stucks
Please help me
here is the ruu.log output
21:00:07:140 [msg] : Version : [1.5.0].
21:00:07:156 [msg] : Config Info : [657680],[1],[1],[0].
21:00:07:312 [msg] : MSystemFile Not Exist !
21:00:07:328 [msg] : CEFile Not Exist !
21:00:10:593 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
21:00:14:656 [msg] : Disconnect ActiveSync .... [2]
21:00:14:812 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
21:00:20:703 [msg] : Get Device Backup ID.
21:00:20:703 [msg] : Device BL VER : [1.01 ] [].
21:00:20:703 [msg] : Device ID Is Incompatible.
21:00:20:703 [msg] : Update Image. CE : [0], MSystem : [0], Radio : [1]
21:00:23:500 [msg] : Check Ac in BL mode. AC : [1]
21:00:25:000 [msg] : IsBL. BL : [1]
21:00:25:078 [msg] : =============================================
21:00:25:078 [msg] : START UpdateRadio !
21:00:33:937 [msg] : Check Radio Level 0 [704].
21:00:35:312 [msg] : RUpgrade 0 : 0 Start.
21:04:41:265 [err] : RWipe Data Error.
21:04:41:609 [err] : BL UpdateRadio Error.
21:04:41:609 [msg] : START UnInitialization !
21:04:41:609 [msg] : END UnInitialization !
21:04:41:609 [msg] : IsBL. BL : [1]
Thanks to Cotulla
Hey Cotulla thanks for replying to us we are waiting for your wm 6.1 rom for Alphine...........

[Q] plz help my p970 ...Brick!

My phone was rooted by gingerbreak v1.2 and I used titanium back up to delete some apps. I have deleted some important system apps so I restart my p970.
It just gives me a Lg logo and not works. I followed the instructions and used the
B2CAppSetup to reover my phone. I use my 32bit computer and 64bit laptop to recover......but it's doesn't work!!
I think I should enter the recovery mode and download an offical rom ? right?
Can anyone tell me how to fix it?
The main problem is that I don't know what's the first step....I don't know how to enter the recovery mode!!
Thx a lot ...my friends
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english
my phone is driving me crazy, cant downgrade
mgregor said:
Use 32bit system. Will be much easier.
0 - download LG mobile support Tool. Install drivers before you connect phone.
1 - download KDZ Updater:
http://forum.xda-developers.com/attachment.php?attachmentid=420545&d=1287222698
2 - unzip KDZ into KDZ folder on desktop. Install MSXML.MSI.
3 - download ROM to folder KDZ on desktop:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/ANEUTL/V10b_00/V10B_00.kdz
4 - remove battery from phone
5 - push VolUp button and connect usb cable. You will see "S/W update" on the screen. Then you can free VolUp button. Wait until all the drivers install. Disable LG Modem in windows hardware manager (Start -> Search -> devmgmt.msc -> hit enter -> expand Modems -> rightclick on LG Modem -> disable)
4 - launch KDZ Updater as admin (rightclick -> Run as administrator)
5 - click folder icon on the right part of window -> point to downloaded .kdz firmware file -> Ok
6 - on the bottom of window you will see Read phone information. Click it.
7 - click start update. DO NOT CLICK ANYTHING ELSE.
8 - wait and pray
9 - when flashing is finished phone will restart
Sorry for my english [/QUOTE
hi, i already flashed my phone once with all the procedures you mention but somehow i bricked it while changing the theme on the boot menu so i had to do an emergency flash on it and somehow now i cant seem to downgrade it again. it always fails and gives me this message.
14:42:59 : A verificar a ligação com o telefone móvel...
14:42:59 : dwWaitResetTime(40000 ms)
14:43:00 : Phone Mode(2)
14:43:00 : *****GetPhoneType Start*****
14:43:00 : Phone Type : OMAP_IFX
14:44:00 : *****GetPhoneBinaryVersion Start*****
14:44:00 : *****Get ESN / IMEI / MEID Start*****
14:44:00 : ESN/IMEI/MEID : 356772041604012
14:44:01 : Phone type Compare start
14:44:01 : *****CheckPCSyncPrograms Start*****
14:44:02 : PCSyncPrograms Not Found - OK and ready to upgrade
14:44:03 : ****************CheckAndDownload****************** **
14:44:03 : ******Extract Start C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
14:44:03 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:03 : File Size = 239985437
14:44:10 : Extract kdz file Success.
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb\n
14:44:14 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V10A.wdb )
14:44:14 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP970.dll\n
14:44:14 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP970.d ll)
14:44:14 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb)
14:44:14 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP970.dl l)
14:44:14 : Extract End C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.cab
14:44:15 : ------------------Model.dll Information-------------------
14:44:15 : Filename : LGP970.dll
14:44:15 : Version : 1.0.0.2
14:44:15 : File size : 262144
14:44:15 : File date : 2011/04/05-23:43:32
14:44:15 : PC Created date: 2011/09/16-14:44:14
14:44:15 : ----------------------------------------------------------
14:44:15 : *****Check LGCM Programs Start*****
14:44:15 : LGCM Programs Not Found - OK and ready to upgrade
14:44:16 : *****WorkModelDLL Start*****
14:44:19 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone \V10A.wdb)
14:44:19 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
14:44:19 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LG P970.dll)
14:44:19 : _DetachDLL Call
14:44:19 : _DetachDLL Call End
14:44:19 : Call fn_StartUpgrade
14:44:19 : Type = OMAP_IFX
14:44:19 : ********* 2Chip Model.dll input Parameter*************
14:44:19 : MODEL_EVENT : 32769
14:44:19 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V10A.wdb
14:44:19 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
14:44:19 : BootWaitTime : 49500
14:44:19 : UsbHighSpeed : FALSE
14:44:19 : PhoneMode : 2
14:44:19 : NewPhoneBinVersion : VDP_VODAFONE(PORTUGAL).LGP970.V10A_00
14:44:19 : ClearSI : FALSE
14:44:19 : AuthMark : 0
14:44:19 : ********* 2Chip Model.dll input Parameter End*************
14:44:24 : wParam : 2004, lParam = 7
14:44:25 : Step : TYPE_WPARAM_IFX_DN_POS
14:44:25 : wParam : 2007, lParam = 0
14:44:26 : Step : TYPE_WPARAM_READ_FILES
14:44:26 : wParam : 2010, lParam = 3002
14:44:26 : CleanModelDll() : Free Model.dll
14:44:26 : _DetachDLL Call
14:44:26 : _DetachDLL Call End
14:44:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
14:44:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
thank you very much for your help so far and in the future too...
Click to expand...
Click to collapse
skylinegt77 said:
C:\Users\sergio\Desktop\VDP_VODAFONE(PORTUGAL).LGP 970.V10A_00.kdz*****
Click to expand...
Click to collapse
Rename those long file name to V10A_00.kdz
try to download rom with 10c european it did the trick for me and my LG is back alive .
Since my black aways had 10c since the beginning. So find the good ROM with match the version you originally had in your tel.
I can't post a link here so i have to find it your self
cheers !!!
You should try THIS.
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
vamshikrushna said:
I tried all above process ... still I am getting black screen on my screen nothing else .... can you please guide me ....
Thanks in advance
Click to expand...
Click to collapse
Hello , I have the same problem. did u find any solution
My LG OPTIMUS Black is tuck at LG LOGO. actually it all came after i installed xionia recovery. After rebooting, it never goes forward, always stuck at LG LOGO. I tried LG mobile update recovery, Flashzip tools using APbin and CP Binfiles, also tred with KDZ files.. but all in vain. Can any body help me please. I am really nervous. thanks in advance

updater can´t detect ba

Hi all,
I bought T-mobile Mda III ph20b, but there is one problem: OS is german (2003se) I preffer english. So I went to this forum, readed chef tony´s guide and:
1. Installed Active sync 4.5 on pc with windows xp sp3
2. Removed sim
3. Putted BA in Bootloader mode, appears serial 2.05
4. Connected craddle with Ba to pc, USB appears
5. Killed wcesomm.exe (there was no wcsemgr.exe)
6. Launched Ma_Upgrade, after start screen he did not show rom version of my ba
Any suggestions?
Ave you put the rom files in the same dir of MA_Upgrade ?
Yes. I follow instructions exactly as they are. Installation folder keep files:
EnterBl.exe
GetDeviceData.exe
MaUpgradeUt_noID.exe
ms_.nbf
radio_.nbf
nk.nbf
RUU.conf
RUU.dll
Also I found log file in C:\
[msg] : Config Info : [000000],[0],[0].
[err] : Image Radio Checksum Error.
msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
Tryed without radio rom file:
[msg] : Config Info : [000000],[0],[0].
[msg] : RadioFile Not Exist !
[err] : Image MSystem Checksum Error.
[msg] : Update Image. CE : [0], MSystem : [0], Radio : [0]
Any suggestions? :/
Guys, I have just tried D-two's RUU and and 6.1 win mobile and it worked!
D-two, a lot of thanks! You are the best!

Help me return to Stock (Verizon LG G2)

I followed THIS thread exactly how it told me to, but its not working. Is this outdated and perhaps a new thread around that can help? Here is a post I made in the thread I linked if it helps:
______________________________________________________________________________________________________
Using method 1, when i get to step 5 I selected "Different Country." The LG Mobile support tool opens, then gives me an error saying the phone is disconnected from the PC. I remember I had to set the phone to ethernet mode to flash 4.4.2 onto the phone, but now I only have MTP or PTP to choose from. Could that be the problem? I cant get past step 5 to restore my phone....can someone help please?
Hee is the log file from the LG Mobile support tool if it helps:
01:28:46 : Restart.....
01:28:46 : Start Date : 2014-03-17 01:28:46
01:28:46 : ---------- QM Testmode ---------
01:28:46 : ***** Check Tool Version *****
01:28:46 : Tool version : 1.6.9.0
01:28:46 : UpgradeDLL version : 2.1.5.0
01:28:46 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
01:28:46 : LGE USB Driver Version :
01:28:46 : Android PDLV Version :
01:28:46 : Android NDLV Version :
01:28:46 : ******************************************
01:28:46 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
01:28:46 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
01:28:46 : SetEmerModeAT()
01:28:46 : *****CheckOS Start********
01:28:46 : Microsoft_Windows7_Professional_Service Pack 1
01:28:46 : *****CheckPCSyncPrograms Start*****
01:28:47 : PCSyncPrograms Not Found - OK and ready to upgrade
01:28:47 : Verifying phone connection...
01:28:47 : dwWaitResetTime(40000 ms)
01:28:48 : _IsConnectedPhone Call
01:28:48 : _IsConnectedPhone(0)
01:28:48 : 0 - NotConnected.
01:28:48 : 1 - Normal connect success
01:28:48 : 2 - Emergency connect success
01:28:49 : _IsConnectedPhone Call
01:28:49 : _IsConnectedPhone(0)
01:28:49 : 0 - NotConnected.
01:28:49 : 1 - Normal connect success
01:28:49 : 2 - Emergency connect success
01:28:50 : _IsConnectedPhone Call
01:28:50 : _IsConnectedPhone(0)
01:28:50 : 0 - NotConnected.
01:28:50 : 1 - Normal connect success
01:28:50 : 2 - Emergency connect success
01:28:50 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:29:06 : _IsConnectedPhone Call
01:29:06 : _IsConnectedPhone(0)
01:29:06 : 0 - NotConnected.
01:29:06 : 1 - Normal connect success
01:29:06 : 2 - Emergency connect success
01:29:06 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:29:09 : _IsConnectedPhone Call
01:29:09 : _IsConnectedPhone(0)
01:29:09 : 0 - NotConnected.
01:29:09 : 1 - Normal connect success
01:29:09 : 2 - Emergency connect success
01:29:09 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:31:31 : _IsConnectedPhone Call
01:31:31 : _IsConnectedPhone(0)
01:31:31 : 0 - NotConnected.
01:31:31 : 1 - Normal connect success
01:31:31 : 2 - Emergency connect success
01:31:31 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:31:33 : _IsConnectedPhone Call
01:31:33 : _IsConnectedPhone(0)
01:31:33 : 0 - NotConnected.
01:31:33 : 1 - Normal connect success
01:31:33 : 2 - Emergency connect success
01:31:33 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:32:15 : _IsConnectedPhone Call
01:32:15 : _IsConnectedPhone(0)
01:32:15 : 0 - NotConnected.
01:32:15 : 1 - Normal connect success
01:32:15 : 2 - Emergency connect success
01:32:15 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:32:19 : _IsConnectedPhone Call
01:32:19 : _IsConnectedPhone(0)
01:32:19 : 0 - NotConnected.
01:32:19 : 1 - Normal connect success
01:32:19 : 2 - Emergency connect success
01:32:19 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
01:33:38 : Check Cancel button active..
01:33:38 : Check Cancel button active..
01:33:38 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
01:33:38 : Page_Error ºÎºÐÀÔ´Ï´Ù
01:33:38 : LG Mobile Phone S/W Upgrade is canceled.\nTo finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
01:33:38 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Click to expand...
Click to collapse
If it helps, I'm also running Win7x64
HeatM1ser said:
I followed THIS thread exactly how it told me to, but its not working. Is this outdated and perhaps a new thread around that can help? Here is a post I made in the thread I linked if it helps:
______________________________________________________________________________________________________
Using method 1, when i get to step 5 I selected "Different Country." The LG Mobile support tool opens, then gives me an error saying the phone is disconnected from the PC. I remember I had to set the phone to ethernet mode to flash 4.4.2 onto the phone, but now I only have MTP or PTP to choose from. Could that be the problem? I cant get past step 5 to restore my phone....can someone help please?
Hee is the log file from the LG Mobile support tool if it helps:
If it helps, I'm also running Win7x64
Click to expand...
Click to collapse
Anyone?!?!?!
C'mon...nobody is willing to help?!?!?!
http://forum.xda-developers.com/showthread.php?t=2448960
No need to thank me. Just doin mah job.
But seriously it was pretty easy to find this with a search. It does help that I have used it myself.
Thank you...I found that method, but didnt know TOT files worked for Verizon...I'll try that method and see if it works for me.
Tazer2death said:
http://forum.xda-developers.com/showthread.php?t=2448960
No need to thank me. Just doin mah job.
But seriously it was pretty easy to find this with a search. It does help that I have used it myself.
Click to expand...
Click to collapse
I'm going to thank you anyway...this method worked!!! Thank you very very very very very much!!!

[Q] Is this a hard brick? (TMO ver)

Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.
You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
southsideweezy said:
Got a G Flex that was rooted, messed with the display density and got stuck in a blank screen with glowing green LED after a visible LG logo....at that time USB Debugging was enabled, but carelessness led to a factory reset when i adb reboot into recovery. Erased. Rebooted. No Screen and NOW no USB Debugging with no way to enable it. I got the phone replaced and its just been sitting, but when my new device got its 4.4 update I snagged the KDZ and other files.
I've tried to use the Offline Fix v2 in the brick post, all 3 methods, but when the software starts to flash via the support tool i get this Log from the program (mind you this is with the phone "booting" into android with no screen and glowing led...that never shuts off)
23:20:58 : Restart.....
23:20:58 : Start Date : 2014-05-15 23:20:58
23:20:58 : ---------- QM Testmode ---------
23:20:58 : ***** Check Tool Version *****
23:20:58 : Tool version : 1.6.9.0
23:20:58 : UpgradeDLL version : 2.1.5.0
23:20:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:20:58 : LGE USB Driver Version :
23:20:58 : Android PDLV Version :
23:20:58 : Android NDLV Version :
23:20:58 : ******************************************
23:20:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:20:58 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:20:58 : SetEmerModeAT()
23:20:58 : _IsConnectedPhone Call
23:21:28 : _IsConnectedPhone(1)
23:21:28 : 0 - NotConnected.
23:21:28 : 1 - Normal connect success
23:21:28 : 2 - Emergency connect success
23:21:32 : *****CheckOS Start********
23:21:32 : Microsoft_Windows7_Home Edition_Service Pack 1
23:21:32 : *****CheckPCSyncPrograms Start*****
23:21:33 : PCSyncPrograms Not Found - OK and ready to upgrade
23:21:33 : Verifying phone connection...
23:21:33 : dwWaitResetTime(40000 ms)
23:21:34 : Phone Mode(1)
23:21:34 : *****GetPhoneType Start*****
23:21:38 : Phone Type : QCT
23:21:38 : *****GetPhoneModel Start*****
23:21:38 : Phone read Model : D95910c
23:21:38 : Server param Model :
23:21:38 : *****GetPhoneBinaryVersion Start*****
23:21:38 : Phone Bin Version :
23:21:38 : *****Get ESN / IMEI / MEID Start*****
23:21:39 : ESN/IMEI/MEID : 013925000409907
23:21:39 : _GetAuthMark : wAuthMark(65535)
23:21:39 : Wait 3Sec
23:21:42 : _SetAuthMark Fail
23:21:42 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
23:21:42 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:21:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:21:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
In device manager I have LGE AndroidNet USB Serial Port (COM 11) & LGE AndroidNet USB Modem #2. A side note, when I flashed the working G Flex with its update via the LG Support Tool legit with no mods it flashed on COM 11 and that displayed on the screen as it updated. With this other device though, its a no go.
When I reboot the device to Download Mode and try and use the Offline Fix methods it errors out but not before i see what appears to be a message saying the BIN Version of the device is ATT-310-260 something of that nature ---which leads to me believe that in some point in all the flashing of sh*t ive done to try and revive this phone, something got crossed up in an LG Flashtool experiment and I've got conflicting information going on inside the device....
I've got an Pixel running Ubuntu, with Virtual Machines for XP, 7 and 8....I'd love to just tear it down and format all the partitions in a Linux term but Im not getting the bulk driver in any OS it still shows as all LG drivers, in Ubuntu its as an LG Electronics device under lsusb -- but does not register at all in ADB. Just blank.
I give. I thought the KK KDZ would be a fix all but I've hit a wall again. Sell it, keep it for parts, or is there a chance at a revival? Clearly, the LG force is not strong with me.
Click to expand...
Click to collapse
vnbuddy2002 said:
You can to recovery yours using my method. The different is mine is ATT and yours is T-Mobile.
http://forum.xda-developers.com/showthread.php?t=2753013
You will need to extract the DZ file from your T-Mobile KDZ file and use it as TOT + the attached DLL.
Good luck.
Click to expand...
Click to collapse
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad
southsideweezy said:
Did as instructed, extracted the DZ from the KDZ, as well as the DLL, installed Flashtool & Megalock.dll, COM ports changed to 41, when I hit the yellow forward arrow I get a box that says "Waiting" then a follow up error box that says FailedPreviousLoad
Click to expand...
Click to collapse
I just checked other threads also. It seems like a few others run into the same error as yours. Right now, what I can think of is to convert the DZ file to TOT, but I couldn't find the converter. Sorry, I couldn't help.
southsideweezy said:
I got the phone replaced and its just been sitting
Click to expand...
Click to collapse
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?
Visa Declined said:
I'm having a hard time following you. Are you saying you messed up your original phone and got it replaced, and then messed up the replacement too?... or does your replacement device still work?
Click to expand...
Click to collapse
Yes I got the phone replaced, when 4.4 rolled out for the flex I updated and snatched the kdz. New one works fine, old one is still not working and still on 4.2, no attempt to flash software is working, neither 4.2 or 4.4
Thank you for your help!!

Categories

Resources