Related
hi!
after unlocking and upgrading my SPV M3000 (Qtek 9100), the camera stopped working and was freezing the PPC. only soft reset made the PPC usable. I have tried to hard reset and then changed some versions of software. finally, I have installed SUMMITER's custom AKU 2.3 rom. it says now:
OS 5.1.195 (Build 14955.2.3.0)
ROM 2.24.10.1 WWE
ROM Date 4/17/06
Radio 02.25.11
Protocol 4.1.13.12
the camera started working, but somehow wiered. it is blinking, the image is all the time moving/jumping, it is of poor quality, and the final outcome looks like in the picture below.
any idea what might help?
thanks!
Did you allow the Cingular Operator Customizations to install?
I know there is atleast on Cab file in there that 'adjusts' camera settings.
If you did then I would try a hard reset, then a soft reset when you see the message about customizing your device in 3 seconds.
Then try the camera and see if it is working differently.
Also, you could try installing the unmodified T-Mobile AKU 2.3 Rom (which Summiter's version is based on) to see if the problem is with Mods Summiter made to the OS.
As a last resort, install the latest official release from your device provider and see if the problem presists.
my device is pda2k or BA
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.169 WWE
all of a sudden the bluetooth on my device did not send or receive
i tried several times the blue light flashes always but my device cannot be seen by other devices and cannot send or receive
is there any thing to install to solve the problem ????
is there any thing to do to know whether its a software or heard ware issue?????
pleeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeease help
use a registry editor go to "HKLM\Software\Microsoft\obex\" here change the value of Dword "IsEnabled" from 0 to 1. and also turn on beam while transfering.
it works for me.
thank you
thank you
but where can i get the registry editor for my pda2k
please tell me
from here
http://www.phm.lu/products/PocketPC/RegEdit/
dear krishan2207
i did it just like you said but it didnot work
please please please
any helppppppppppppppppppppppp
please help
my problem didnot resolved
u should try a hard reset or rom change.
dear krishan2207
i did the hard reset several times and
i did re install the WM2003SE after the hard reset but it didn't work
coz i find the same
today paper after re installation of the WM2003SE rom ?????????
is there any way to delete or formating the old rom ( completely ) before the installation rather than the hard reset
please help
many thanx 4 your follow up
y u r not giving a chance to wm6 or 5.
dear krishan2207
i am not afraid of upgrading
i am afraid of downgrading back to wm2003
i want to know if the extended rom return to its original setting
i think u r very new to all this.dont worry man u can return it back.
dear krishan2207
i ve changed my rom to wm6 & back to wm3 several times
but blue tooth still not working
i think it is a problem in BT driver
any help with that please
another Q ?
how can i remove my old rom completely ie not up grade or replace i want to delete my rom completely before i install the new rom
thanx 4 help
DrAsd
hv u done a hard reset after upgrade if no, chk the wike and u can not empty(completely remove) your rom. when u upgrade or downgrade ur rom all files get changed but U HV TO DO A HARD RESET. MUSTTTTTT.
i did the hard reset before & after up grading & downgrading
and the same result was found
any help with the blue tooth driver ??
Same here, tried everything
I bought a T-Mobile branded Blue Angel used at an electronic swapmeet last month. I thought the unit was in good working order as I tested the voice GSM calling ok. Now I found that the Bluetooth does not work at all. I tried upgrading to WM6 and downgrading back to 2003SE and did many hard reset all along. It'll not find any BT devices, not can be found by others. It shows up as if it is working, in the BT stack, as well as the LED, but no communication at all. I think the chip is dead.
I wonder how I can get this repaired, and how much it would cost me. It's a bummer, otherwise it's working fine.
Hi all, I 've just update my Tilt to the WWE WM6.1 ROM, but after that, when I connect the Tilt with my computer & soft reset the tilt, it will hangs at startup screen, if I disconnect it & soft reset, it becomes normal, anyone has this problem too?
here is the information of my tilt:
ROM ver: 3.28.405.0 CHT <----I sure I load the WWE 6.1 ROM to it?
ROM date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
this is just the tip of the iceberg. wait until you notice other issues, especially if you were using lots of 3rd party software. core media player and skype are two very commonly used pieces of software that dont work as well. i have spent the whole of sunday torturing myself with this update.
i tried to be careful and waited until the official rom update appeared. i was patient and i thought i was wise, but it didnt help. i might have to revert back to 6.0 after a few days of testing
This should have been posted in the ROM section but anyways you need to check out this to see how pissed people are about it so dont think its just yourself
http://forum.xda-developers.com/showthread.php?p=2233188#post2233188
i need help with my phone, ive tried almost all, just udpated my cingular sx66 from wm2003 to wm6 through wiki, almost nothing is working perfectly, my wifi has to click many times in order to turn on, bluetooth paired with my jabra, awful, intermitent sound, can't watch youtube, and many times the phone icon turns off and when i turn it on, it says no service, ive tried with many sims but i have to soft reset almost always in order to read the sim, i already unlock it with the unlocker provided here, ive tried searching for the latest radio rom but i have no idea how to update, tried to install extended rom, no idea, did all the instructions in the sx66 standardization project, it is just a folder with a lot of cabs but not even the auto install runs or do anything, please i need help, i cant use the phone, ive searched and couldn't find anything
thanks for the help
mine working fine... try to hard reset again. btw ur flasing who's ROM?
ok the first thing is that whenever u take the battery out from BA u must soft reset it by the stylus.
and radio link is
http://rapidshare.com/files/131754772/BA_RRPT_Radio_11500.rar.html
upgrade procedure is same as u did before.
i just upgraded using the wm6 Ba wiki, no issue with that, i used the same radio rom you posted 10 times but it never updates, it stays, in "updating device, don't disconnect" for more than 8 mins, so I suppose is not working
rom version: 5.60.00
rom date: 03/02/05
Radio version: 1.02.10
protocol version 1337.35
extrom version: 1.40.125
i think that the extrom installed,
this is something wrong with ur device radio cause i hv sucessfully updated my radio using that files. and also given it to other xda-developers.com members for update and they did it sucessfully.
Too Bad, Ive Tried Everything, The Worse Things Is That I Have Three Exact Phones
please visit :
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
for make sure your upgrade is valid.
and i suggest this rom :
http://forum.xda-developers.com/showthread.php?t=406372
thanks, this new rom worked perfect, the only thing is that i don't see the htc home as I used to see it with the hour, weather, i just see on the bottom, the ultimate launche but is different, i installed all cabs,e xt roms and extra cabs, im i missing something, thanks
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer