Touch Screen LCD of Blue Angel stop working all the sudden? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I have this Blue Angel or I-mate PDA2K for a couple months ago. It's working fine for a while. One day, I notice the touch screen LCD performance kind of slow. I decided to soft reset it. I did several times..it didn't fix the problem...then I decided to hard reset it. After I hard reset it...all the suddenly, the touch screen LCD not working at all. Does any1 know how to fix this problem? Let me know, thank you! Do you think if I upgrade ROM to Windows Mobile 5....will fix the problem? Just a thought. Have a great day.
Kent

..
That maybe a hardware problem... but if you want just try to reflash your device...

Related

my diamond is crazy!!! Help!!!!

from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.

Herald soft resets when closing keyboard...

Hi folks,
As the tittle tells, now and then when I close the keyboard from my herald it resets itself...Does not always happens, sometimes I cannot reproduce it, and sometimes it does it several times in a row...
This is my 2nd Herald, the 1st one did this also until the touchscreen failed. Got that one repaired under warrenty. While this one whas in repair, my wife bought me a 2nd one with a German Rom and this one has now been affected with the same bugg...?!
Its just out of warranty now...I guess I could start using the "spare" P4350 but it came out of warranty with a French keyboard and Rom, not really what I prefer...
So anybody an idea? Bad connection between the slider and the body or a problem on the mainboard?
It seems that nobody has experience with this "problem"?!
Well, for me its simple...its my last HTC phone...2 phones who have the same problem, no thanks!
If it gets worse I will give it a hard reset with a hammer, that will solve it for once and for all...
I have a tmobile wing that had the same problem. turns out that after 20 or so times in a row, I decided to figure out what was happening, that it was the battery not making good connection. and closing the keyboard would cause the battery to jar loose for a split second and loose power. I cleaned the battery and the phone terminals and mine hasn't done it since . hope this helps
I've had that problem before with other HTC devices (wizard / Tmo MDA) ... I ended up just getting an exchange.
i've also had this problem with my herald. I fixed it with this file, I think you know how to use it...
file
This file is an Rom...If this would solve the problem I prefer to flash it with an official Rom from HTC...but why would it run fine for a year if its a Rom problem?

Touch screen is dead on my X1

Hello guys,
I got my new X1 few days ago, and today when i woke up i found out that the screen is not responding to touch...the stylus does nothing. I attempted a hard reset, but I can't align the screen because the stylus still does not work.
I managed to go to today screen and the mouse is working perfectly but touching the screen is not working at all, even through alignment.
No apparent cause to that.
Any idea how to fix this issue?
Thank you,
Try doing a reflash (with the generic ROM so that u won't lose the warranty)
If that doesn't work...i'm affraid there's nothing left to do but go and replace the touchscreen (it's still in warranty isn't it)
Sorry pal
Oww, sounds like a bad problem. You should indeed try a hard reset (though from what I see you've already tried).
If that's a no-go, it's warranty time. I guess you got unlucky. Good luck patching it up!
You can try installing X1 SoftTouch which will max out the responsiveness of your touchscreen in the registry without having to calibrate. I'm not highly optimistic it will work in your case but it won't hurt to try. The .cab is here:
http://forum.xda-developers.com/showthread.php?t=485037
Well guys,
you will never believe it, i read in a forum that some guy faced the same problem with another WM device and he moved the battery and left it overnight and the second day the phone was alive again.
Guess what? I did the same and amazingly it worked.
By the way thank you (ring-bearer) for the cab file, i installed it and it has improved the touch responsiveness.
Touchscreen Fixed
Hi Thanks for that. I tried the take the battery out and leave it over night trivk and it worked for me to! Brilliant! Upgraded the touchscreen with the cab file to - all good. Thanks again.
for me this trick (remove the battery for one day) doesn't work.
also i changed the touchscreen but no results.
maybe the problem is somewhere else

Unlucky :( Touch Diamond touchscreen stopped functioning

Hello there community,
A few days ago my touchscreen just stopped working on my Touch Diamond, i tried everything to get it to work...
Updated rom with new firmware from the HTC website, did a soft rest, hard reset but it did not help
I hope maybe someone here had the same problem and solution for this, otherwise i have to RMA the device.
Thnx for any help
Hi Xnergy, have you got your Diamond repaired?
I am having the same problem on mine...
I had this also.
I did removed a battery for a whole day, like 24 hours, after that it works again!
Do the hard buttons work? I had something like this few times, as far as I remeber after removing battery for a moment it worked.
This happened to me in a few weeks ago. The touch screen either would not response, or that the alignment needed to be adjusted a few times a day. In the end, I send it in to the HTC service centre on 30th March. They replaced the whole touch screen, and courier it back to my office on 3rd April. The touch screen is working like brand new now.
yeh mine did this but i noticed tht if i keep the phones touchscreen worm abit it will function ok, gunna send it in to coz its starting to drive me up the wall

Touchscreen do not work anymore... but why?

Hello guys,
I have a big problem! My Diamond do not work anymore. I have used a rom for some weeks and by now, the touchscreen doesen't work. But why? Today, I was wondering, that the TouchFlow 3D got problems. When I use the touchscreen, I couldn't use the touchflow. Everytime, it scrolls the clock down and up (like using the sense). the only way was to use the hard buttons.
Then I decided to make a hard reset. and now, its not possible to get through the touch calibration screen. nothing will happen. what can i do?
please help me!
Have you tried another rom ?
I am experiencing the same problem with my diamond!
and I have read in another thread that it could be due to malfunction of the digitizer installed on top of the lcd screen
http://forum.xda-developers.com/showthread.php?t=411386
I have tried flashing with another rom, but still no luck
so I have decided to order a brand new LCD+digitizer kit from ebay and try to get this fixed my own
wish me good luck
here is the link the the ebay page
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170398900029&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

Categories

Resources