Dead Wizard after 2.47.11 radio rom update - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I have just updated my MDA VARIO with 2.47.11 radio rom and it is still restarting and restarting and cannot start. Please help with it.
Original SW versions was:
IPL: 1.06
SPL: 1.06
OS: 1.6.2.6
GSM: 01.12.10 (was :-( )
Hopefully somone has got a solution.
Thanx a lot.

muxe said:
I have just updated my MDA VARIO with 2.47.11 radio rom and it is still restarting and restarting and cannot start. Please help with it.
Original SW versions was:
IPL: 1.06
SPL: 1.06
OS: 1.6.2.6
GSM: 01.12.10 (was :-( )
Hopefully somone has got a solution.
Thanx a lot.
Click to expand...
Click to collapse
put it into boot loader mode and flash a rom.
next time dont mix 2xxx radios or os to boot loader 1xxx.that was your mistake.

Thanx
faria said:
put it into boot loader mode and flash a rom.
next time dont mix 2xxx radios or os to boot loader 1xxx.that was your mistake.
Click to expand...
Click to collapse
Thank you very much. Right now Vario is doing well so I am happy again ;-).
Many thanx.

remove this thread muxe, dont flood the forum, dont call ur phone dead. its not true

new Radio
I got my HTC P3300 with Radio 2.67.90. Is there any hope to have it in the new ROM, Faria?
TIA

almozaffar said:
I got my HTC P3300 with Radio 2.67.90. Is there any hope to have it in the new ROM, Faria?
TIA
Click to expand...
Click to collapse
I doubt it as there were some serious problems with it reported here
btw, I found the 2.47.21 radio for the Prophet and tried it on my 8125. Works OK as a radio but causes the battery's power status to be "unknown" so's I'm back to 2.47.11

Related

Help my Charmer Rom, please

When I turn on my Charmer it show on boot loader screen IPL 2.06.0001 SPL 3.08.0001 and can not do anything. My charmer use english rom but I have to flash german rom AKU 3.3 last night that up to 95% of process and ERROR 302. Now it alway show on boot loader screen. Anyone can help me,please or I loose my Charmer ??
Search
Search the Forum. I'm sure the solution was described some days ago
My Charmer UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Are you sure you have a charmer? not 818Pro/htc prophet/xda neo ?
I can see your bootloader version has .0001 at the end which means its G4 chips, and as far as I know, there are no charmers with G4.
does your phone look like in the attachment?
vlodeck said:
Are you sure you have a charmer? not 818Pro/htc prophet/xda neo ?
I can see your bootloader version has .0001 at the end which means its G4 chips, and as far as I know, there are no charmers with G4.
does your phone look like in the attachment?
Click to expand...
Click to collapse
IMHO,my charmer is G4.The device is T-mobile Compact II.
IPL/SPL all are 2.06.0001.
I flashed WM6 into my charmer and it worked on.
Sorry for my poor english.
Hi, just for reference,
My T-mobile MDA Compact II (Charmer) with the latest official ROM (Aku2.0) has the following:
IPL - 2.06
SPL - 2.06.0000
pjam

Help. Ive got a Brick !!

Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
you say with the wm6 oficcial there is not a official rom for wizard tellme what rom do you used
AndyG said:
Can anyone please help with my brick ? ? ?
I tried to go to WM6 by unlocking the CID and the phone - so far so good. Read that i needed IPL/SPL 2.xx or higher so set off to search. Found IPL/SPL 3.08 so installed those to my phone. Then tried to upgrade to the WM6 official rom found on these very pages. Now every time i flash i get update error 302 at 99%.
Im almost sure its the IPL/SPL but i have nothing to backtrack to and not a lot to back this theory up as im still a newbie in the ROM area. My original versions were 1.02 each as i have a G3 O2 XDA Mini ( wizard )
im really stumped and phoneless at mo so ANY help would be grateful for.
Thanks
Andy
Click to expand...
Click to collapse
I bet you went from 1.02 to 3.08 without stopping at 2.xx
Maybe that's the cause?
but he says than he flashed with the oficcial rom there is no oficcial are agree
Hi Guys,
Thanks for the quick replies.. I used
http://forum.xda-developers.com/showthread.php?t=310954
( about quarter way down it says official download site for WM6.0.0)
Mestrini - Yes i went straight from 1.02 to 3.08 coz i cannot find the V2.xx IPL/SPL files but i have found the updater solely for the IPL/SPL to 3.08 which is what i used.
is that any use ??
flash your phone with the tmobile 2.26, that should correct your issue. It will also give you the 2.26 version of spl/ipl
ok if you had a cid unlocked device search in the forum for the t-mo 2.26 ipl/spl after you can update for the rom as you tell
en joy it
Thanks for the advice guys, ive tried several different roms and i have a consistent problem where it will not let me change the rom as ( i think ) my SPL version is still 3.08 and every ROM bombs out with "this is an upgrade only"
help me downgrade my IPL/SPL back to 1.02 pleaseeeee
cheers.
Andy
jb007jb
Junior Member
Join Date: Jul 2007
Posts: 6
Default Do Not Upgrade To 3.08 !!!!!!!!!!!!
Hi,
i have T-Mobile MDA and Im stuck with spl 3.08
I did everything.......... and I mean EVERYTHING and nothing helps me bring back my MDA to the original T-mobile software or downgrading the SPL.
1. Downgrading my IPL to 1.01 (using button rom)
2. Unlocking CID with lokiwiz (successfully)
3. Running button rom again
The SPL still stays 3.08 after doing the above...
If there is another way to downgrade the SPL 3.08, please let me know. I really need the T-mobile original rom version.
Thanks so much.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Reply With Quote
Click to expand...
Click to collapse
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
Thanking everyone who has taken the time to contribute
Andy. ( looking hopefully around too ;o) )
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
Click to expand...
Click to collapse
Thats your problem, reflash the 1.02 rom again, both IPL and SPL have to be the same.
hey nottoosmart
i know... i need to find a way to drop the SPL back to 1.02 or thereabouts. i cant flash back to the T-Moblie 2.26 ROM coz it says my SPL is too high. i upgraded my IPL and SPL using a rom updater now whatever i try i cannot drop the SPL version.
AndyG said:
I see jb007jb has exactly the same prob i do. i have done everything he has and am still in the same situation - IPL 1.02 & SPL 3.08?
dont suppose anyone can cook up and IPL/SPL downgrader like the one i used to upgrade to 3.08 can they coz with SPL3.08 i cant downgrade ROMS coz i keep being told i need to acquire a newer ROM for my device
...
Andy. ( looking hopefully around too ;o) )
Click to expand...
Click to collapse
Maybe, just maybe, the O2 ROM may help you. Please see http://forum.xda-developers.com/showpost.php?p=1379884&postcount=2 That post is from vippie - so you know that you can rely on it!
kernelguy

How to change 2.16 to 1.xx - please

Hello everyone,
I'm kinda lost between all this posts and numbers. I don't know my phone is G3 or G4, so I'll post everything and waiting your help to tell me. when I download rom & upgrade my pda, it does upgrade but with no effect like I did nothing
here is the info about my device:
Bootloader screen: IPL 1.01 / SPL 2.16
Using "hard_SPL-G4.exe" program report that my device is : G3
Booting slpash saying :
IPL 1.01
SPL 2.16
OS: 1.5.4.2
Menu>Settings>Device information:
ROM ver: 1.5.4.2
ROM Date: 11/08/05
Protocol ver: 4.0.13.23
pretty please help me how to upgrade it.
First things first: Your phone has a G3 DOC chip.
Get Wizard Service Tool and see if the CID is still locked (i think it is). The problem you have now is that you failed the upgrade and the SPL increased but the IPL remained 1.xx and unless you manage to get them to 1.xx you won't be able to unlock the CID.
Many thnx, mestrini
I tried to unlock CID using WST but got this:
SPL version is 2.16.0000
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now to upgrade my device, I need to downgrade, unlock CID then upgrade it.
I'll do some search now
Many thnx again
Flash Button's 1.05 ROM couple of times until SPL changes to 1.01, then you can do unlocking.
I just downloaded : button's 1.05 ROM and upgrade/downgrade my device with no luck to change SPL. still reporting 2.16 SPL.
4 tries till now. all success upgrade/downgrade with no luck to change SPL.
any suggestion highly appreciated.
Thank you
Bailamos said:
I just downloaded : button's 1.05 ROM and upgrade/downgrade my device with no luck to change SPL. still reporting 2.16 SPL.
4 tries till now. all success upgrade/downgrade with no luck to change SPL.
any suggestion highly appreciated.
Thank you
Click to expand...
Click to collapse
I'm also clueless on how to solve this issue and believe me that it's what bothers me most nowadays because few have recovered from it and a lot are facing it still.
mestrini said:
I'm also clueless on how to solve this issue and believe me that it's what bothers me most nowadays because few have recovered from it and a lot are facing it still.
Click to expand...
Click to collapse
Thanx alot man
I may stick with un-upgradable device than useless device from trying & trying
Bailamos said:
Thanx alot man
I may stick with un-upgradable device than useless device from trying & trying
Click to expand...
Click to collapse
Sounds wise but whatever you do always be sure to have battery with good charge (>60%)
Plz keeo on trying by flashing Button's Rom 1.05 a couple of more times,u'll get down to ipl/spl 1.05
if it still doesn't,than try this rom Xda_MiniS_LaunchROM_v154102,hope it'll solve the problem.
third option is that while in bootloader mode,download and flash the Official Rom of ur carrier which was pre-installed before or any upgraded Official rom from the carriers official site.
Hope this'll work out,goodluck
7 months later .....
I'm back and asking you please, is there any solution yet for my problem? or it is time to think about having another device?
Thank you
Bailamos said:
7 months later .....
I'm back and asking you please, is there any solution yet for my problem? or it is time to think about having another device?
Thank you
Click to expand...
Click to collapse
Hi, i'm glad you came back as the latest version of WST allows to CID unlock even if IPL and SPL values are different.
A member reported success in recovering from a similar situation so i think you should try it. HERE
good luck and report back
cheers
Thank you, mestrini
I'll try it and report back
many thnx again
I just finished trying, here is my storyline
1) Faith on successful upgrade was 1%
2) I downloaded WST 4.2.2
3) Did CID unlock, then I got error that I should downgrade IPL to 1.xx ish >>
4) faith downgraded too to 0%
5) I did downgrade using button rom ( back to IPL:1.xxx SPL 2.16 )
6) Did CID unlock again, got msg that "Want to try unlock?" then faith down to -1%
7) after clicking "Yes", got msg saying "All done" ( Faith back to 0% )
8) did soft-reset, and was watching booting screen on my device, I saw IPL still 1.01 / SPL 2.16 >>> I was like d'oh ( Faith lvl -1% )
9) was pushing myself to do upgrade using random rom which was not workin on my device.
10) Upgrading in progress >> Upgrading finished >> Device rebooting.
11) was watching boot screen again, then I saw IPL 1.01 / SPL 2.15 ( meh >> Faith lvl -2% )
12) Faith Jump to 100% when I saw the new start up screen and the rom is damn working now
13) I'm so gratfull and happy ~ thank mestrini ~ thank you everyone
all in all, WST did it I got my rom upgraded now
thank you again
Yours,
Bailamos
Nice post, i enjoyed reading your story by steps and even more the faith progression (maybe a graph was in order there )
I'm glad your 'sort of' sorted it and you can now use other ROMs but it shouldn't be finished until both bootloaders have same value. But that's me, i don't settle for half job
Anyway, enjoy your new ROM
Cheers
CONGRATS !!!
Bailamos
Finally ! got it on the road after 7 months...
mestrini
Thats "THE TOOL" ,always had faith in you m8,thanks for such a wonderful tool
zabardast_1 said:
mestrini
Thats "THE TOOL" ,always had faith in you m8,thanks for such a wonderful tool
Click to expand...
Click to collapse
Thanks m8 it's all for the community

upgrade radio only

Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
kimb0 said:
Hi. I just got my Wizard and would like to upgrade just the radio rom. i looked trough the forum but i cannot find the answer. if there is a howto forgive me for asking again.
i bought the Wizard second hand so the gaurentee is not a problem.
thanks in advance
IPL: 2.16 (G3 device)
SPL: 2.16 (G3 device)
Radio: 02.07.1ò
Click to expand...
Click to collapse
Flashing and upgrading a Radio Rom is not much of a difficulty,just download the Radio Rom of your choice,attach the phone with pc via usb cable and run the RUU application in the Radio Rom,it hardly takes one minute or two to get flashed and complete.Check out the Radio Roms in the forum of your choice or read the 'wiki'
Cheers!
thank you
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
kimb0 said:
Ok i ran the RUU and it all runs nice up to the page were is states the old version you have on and that it will upgrade to the following, there it is just blank. i have read the readme and i still can not find the problem. can it be that my Wizard is stil CID Locked?
kimb0
Click to expand...
Click to collapse
Flashing or upgrading just Radio Rom doesn't require CID unlock,Its not an OS,it doesn't include any IPL/SPL in it,it just upgrades the GSM of the phone,which is not integral part of any Rom (OS)
Yes ! sometimes the upgrade utility do not show the details of the Rom its flashing,it doesn't matter,just click for upgrade,it'll start the process.
Cheers!

Which Radio Should I Use?

Hey everyone, I have a G4 8125 and I've updated to WM6 with TouchFLO.
I've recently been having some problems with service and receiving calls, texts and even sometimes voicemails. Usually a power cycle fixes the problem. At random times people will tell me they just texted me or called me and even after the power cycle, I never get them.... I've been reading about radio's and such, and was wondering if anyone with my info and location has any experience!
My Phone's Info:
ROM Version: 6.0.0.0 WWE
ROM Date: 2/02/07
Radio Version: 02.25.11
I'm located in Chicago and I have a G3 ATT SIM card.
Thanks for any input!
try radio 2.19.11 it's the only one that works for me.
I prefer radio 2.19.11! Even the new radio 2.71.11 is not better in my opinion.
I have not tested 2.19.11 but my 2.71.11 works wonderfully...
I recently upgrade my O2minis G3 with Radio 2.61.11 and it's going to die , when turn on the device it don't show the GSM version, only IPL, SPL and OS, und it hat no phone signal. WHo can help me ? Please
hoangngt said:
I recently upgrade my O2minis G3 with Radio 2.61.11 and it's going to die , when turn on the device it don't show the GSM version, only IPL, SPL and OS, und it hat no phone signal. WHo can help me ? Please
Click to expand...
Click to collapse
I'm having the same problem with mine. I just upgraded to WM6.1 Professional Vista Splash. I just flashed the radio version 02.19.11 to the phone and I still keep losing service. Could it be I need to change my ISL, which is 1.05 and my SPL, which is 2.25 to the 3.08 version?
Kim - Austin, TX
G3 Wizard
hoangngt said:
I recently upgrade my O2minis G3 with Radio 2.61.11 and it's going to die , when turn on the device it don't show the GSM version, only IPL, SPL and OS, und it hat no phone signal. WHo can help me ? Please
Click to expand...
Click to collapse
I'm having the same problem with mine. I just upgraded to WM6.1 Professional Vista Splash. I just flashed the radio version 02.19.11 to the phone and I still keep losing service. Could it be I need to change my ISL, which is 1.05 and my SPL, which is 2.25 to the 3.08 version?
Kim - Austin, TX
G3 Wizard

Categories

Resources