Hi everybody,
I have a big problem, after using "wizbackup_133", a backup of my qtek was made on my SD card, but now that the upgrade to Faria's last ROM was successful, i'd like use my mini-SD card as before, but the phone didn't recognize it anymore...
What can I do ? Is there a way to format all data on the SD card and use it as before ?
Please help, it's a 1Go mini-SD card, I don't want to lose it...
Thx to all of you !!!
OxYTooN
OxYTooN said:
Hi everybody,
I have a big problem, after using "wizbackup_133", a backup of my qtek was made on my SD card, but now that the upgrade to Faria's last ROM was successful, i'd like use my mini-SD card as before, but the phone didn't recognize it anymore...
What can I do ? Is there a way to format all data on the SD card and use it as before ?
Please help, it's a 1Go mini-SD card, I don't want to lose it...
Thx to all of you !!!
OxYTooN
Click to expand...
Click to collapse
take out and put in a few times until it's recognised... That happens to me some of the times as well...
vseehua said:
take out and put in a few times until it's recognised... That happens to me some of the times as well...
Click to expand...
Click to collapse
Ok, Thanks, I'll try this...
OxYTooN
Related
can somebody help me i'm searching about 2 months but i don't find enything....
my problem is:my tilt don't recognise anymore my usb cable neither my micro sd card...I want to upgrade to 6.1 to solve the sd problem.i think is a driver problem because after i install wm5torage on sd card after soft reset no any sdcard anymore...
ps.i think i tried everything...hard reset etc...
please help!!!
It is in the wiki
The first thing you should have done was check the wiki. It gives step by step instructions on how to flash via the sd card. Just a suggestion.
yes i know but my til don't recognise any microsd card anymore...
nstnkt said:
yes i know but my til don't recognise any microsd card anymore...
Click to expand...
Click to collapse
well if your tilt isn't recogonizing your sd card than i would suggest trying a different microsd card and see if that is readable by the microsd slot. If not than that might be a hardware failure and is covered by 1 year warranty from date of original purchase.
If you think it is because of wm5 storage than try a hard reset and see if that solves the issue .. although i doubt it will but doesn't hurt to try.
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
nstnkt said:
i already try a hard reset but noting change...
and i bought my tilt on ebay...i dont think is covered by warranty
but i don't give up!!!
Click to expand...
Click to collapse
try a different card and see if it recogonizes that one
Reformat micro sd card with your PC
Make sure your card is formatted correctly. I'm not sure, but I believe it should be FAT32.
i already tried 6 diferent micro sd cards...all formatted in fat32
nothing changes...
i forgot one thing.when i power on my tilt it says if i want to format my sd card but there isn't any card inserted!!!!
Hey guys, i've got a 8gb Apacer card. I've installed successfully the HardSPL (it shows Olinex's name), i've downloaded Smaberg's latest rom, which is already renamed. I'm taking off the battery and then putting it back, i'm pressing the volume down key and at the same time the power button. It takes me to the 3 color screen but it stays stuck to "Serial" which is written down on the 3 color screen.
Am i doing something wrong?
Bill
Which is the filesystem of your SD Card?
Have you renamed the ROM with this name: kovsimg.nbh?
[email protected] said:
Which is the filesystem of your SD Card?
Have you renamed the ROM with this name: kovsimg.nbh?
Click to expand...
Click to collapse
I formatted it with FAT32,
Yup ROM is already renamed to kovsimg.nbh
Can't understand why it stucks to 3 color screen when it says down to the screen "Serial".
U not press volume down long enough
start again
I pressed it for 3 minutes and still stucks to serial screen.
Is the nbh file at the SDcard root?
Yeah it is. I have some other files too at sd root, does it messing up the things?
bill_viper said:
I pressed it for 3 minutes and still stucks to serial screen.
Click to expand...
Click to collapse
reformat the card fully....not quick formate and give it a try again.
agent_47 said:
reformat the card fully....not quick formate and give it a try again.
Click to expand...
Click to collapse
Just did it but no luck, still the same issue!
I've had the same problem. Formatted my 2Gb a dozen of timeswith my laptop and it didn't function. Finally I formatted the card with another PC at the office and now everything works as planned.
So, not every format is the same??
Just tried to flash a rom with another SD 2gb and worked fine!
What the heck is going on with my devilish 8gb card...the card is working great but no flashing...maybe i'll have to find another computer too to format it.
Kingston card does not support card flash. I do not know why
htyhzd said:
Kingston card does not support card flash. I do not know why
Click to expand...
Click to collapse
Mine is Apacer brand. I downloaded also some utilities for SD formatting but again no luck.
maybe only sandisk is ok
htyhzd said:
Kingston card does not support card flash. I do not know why
Click to expand...
Click to collapse
Are you sure of you???
Because I have a Kingston 8Gb SDHC card and I use it for flashing my phone with SDcard method when I can't flash it with my PC...
Where is your original 8gb card guys? Did you change it for a reason?
Sorry but the 8GB is not included with every Xperia, at least not in every country.
My german operator send it without sd card, I had to buy my own one.
So I think this may differ from country to country or provider.
I had the same problem, could not flash it with SD card method, tried it via PC (USB), also no success and tried it again with SD method and tried it for like 10-15 times and then all of a sudden it worked.
I tried putting hard-spl on there again, while I knew it was on there already, even this did not work and started working after some tries and then I was able to do the SD method.
I have a sandisk 8GB mem card, so it's probably not brand related..
We have the Kovsimg.nbh, how do we create the ROMUpdateUtility.exe?
Hello guys,
After this huge problem i've got http://forum.xda-developers.com/showthread.php?t=517752 (i can't flash any rom with the 8GB card) and we couldn't find a solution, i'm asking if there is a way to convert the Kosvimg.nbh file to ROMUpdateUtility.exe file so i can flash the ROMs through the PC?
Looking forward to heard the good news! It's too pitty everyday to read about these new ROMs and i can't flash them!
Cheers,
Bill
bill_viper said:
Hello guys,
After this huge problem i've got http://forum.xda-developers.com/showthread.php?t=517752 (i can't flash any rom with the 8GB card) and we couldn't find a solution, i'm asking if there is a way to convert the Kosvimg.nbh file to ROMUpdateUtility.exe file so i can flash the ROMs through the PC?
Looking forward to heard the good news! It's too pitty everyday to read about these new ROMs and i can't flash them!
Cheers,
Bill
Click to expand...
Click to collapse
Just put the ROMUpdateUtility and the NBH file in the same folder and run it, it will flash whatever NBH file is in the same folder as it. If you need the RUU exe, just extract it from a shipped ROM using WinRar. Or use this Custom RUU : http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Please don't create new threads for existing issues.
Ta
Dave
Help me from you!
This happens from time to time my phone is not visible the memory card!
After restart everything is ok.
Sory my English !!!
Card is possibly going bad.
I just lost my 16gb San Disk and had to replace it with a Kingston.
I can always format it and get it back, only to have it fail again within a week.
Back it up and reformat it Fat32.
Also check for clean connections and damage to the card or device.
Thanks for the information, I will replace cards
demsky said:
Thanks for the information, I will replace cards
Click to expand...
Click to collapse
was your problem solved?
I'm probably having the same problem - cant get to memory card, but after i take it out and insert again it works ok for some time and again disappear.
I had the same problem. I format the card, changed my roms many times, but they did not solve the problem. finally I have changed the memory card and the phone works fine with the new card
jeffy_rf said:
I had the same problem. I format the card, changed my roms many times, but they did not solve the problem. finally I have changed the memory card and the phone works fine with the new card
Click to expand...
Click to collapse
Tnx for the tip.
I will try changing the card,
it is a 8Gb card i took out of my htc kaiser loaded with useful cabs, I will try a new 4gb card and see if it makes a difference.
I also have the same problem, does changing the memosry card helped?
Yes. Apparently they get corrupt after a time and reformatting does not help.
thanks a lot sir, i'll try to change my card, hoping it'll get better.
when i was using my xperia with the cm 6.1 barebone that is released by neopeek,i see in the gallery that it stated thet the sd csrd is not mounted so i tried manualy using setting to unmount the sdcard.but when i tried to mount it again it failed.so,i switched to winmo and i can't read my sdcard.i tried to connect it to my computer,it won't recognized.it said in properties that it is in RAW format.How can i repair it?i tried few formatter like sdcard formater by panasonic but it said card not suported.
btw my sdcard was san disk 4 gb sdhc.
any help would be appriciated.
67 views but no reply?please help me.i don't want to buy a new sd card.anybody?
no one can help me?developers can you help me maybe?
really,no one willing to help?over 100 views but no replies?
I think you have to buy new card
Some SD cards have problems with android. Problem might be fixed later, but for now use another card.
matejdro said:
Some SD cards have problems with android. Problem might be fixed later, but for now use another card.
Click to expand...
Click to collapse
no,mine won't be read in winmo too.
zyotty said:
no,mine won't be read in winmo too.
Click to expand...
Click to collapse
sounds like you broke the sd card. as android runs from the sd card it could have been corrupted when u pulled it out.
Ps. If u did not spoil your sd card, sd card not found problem could actually be fixed by hp format tool. Probably android does not read the format of the sd card at first....
thank you all.i will try it.and if it don't work,then i should buy new one.
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
I only get this message once I insert the microsd card into the tablet, I get the option not now or go to my files, and I always press not now, and it never come up again until I take out the card and re insert.
do you keep taking out the card or does the message just comes up without you removing/insert the card.
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
Backup all your data from sd card and format the card from settings/storage
Probably a card on its way out.
Hello ...
kms108 said:
I only get this message once I insert the microsd card into the tablet, I get the option not now or go to my files, and I always press not now, and it never come up again until I take out the card and re insert.
do you keep taking out the card or does the message just comes up without you removing/insert the card.
Click to expand...
Click to collapse
thank you guys for your quick reply. Apologize for the insufficient info. Okay, initially when I inserted the card, the tab is in off mode. Once I powered it up, I didn't get that message. I straight away go to my files and the sd card content is already there, so I thought that is normal, but after a while that message cames on. It goes off once you touch anywhere on the screen or the soft keys. This thing happened on and on. the only thing I haven't done is formatting the card. I gonna try that method afterwards. wish me luck...>_<
artdze said:
thank you guys for your quick reply. Apologize for the insufficient info. Okay, initially when I inserted the card, the tab is in off mode. Once I powered it up, I didn't get that message. I straight away go to my files and the sd card content is already there, so I thought that is normal, but after a while that message cames on. It goes off once you touch anywhere on the screen or the soft keys. This thing happened on and on. the only thing I haven't done is formatting the card. I gonna try that method afterwards. wish me luck...>_<
Click to expand...
Click to collapse
It is always best to go through the procedures when insert or removing the sd card, use the menu and unmounts the SD card then format, it's best not to continuous taking out the SD card, even though you can do that.
hmm.... I believe I have tried doing all the method mention before. no joy... formatting process unable to complete(using onboard programme), its only done half way before that message appear again....tried several times....still the same....can't format using PC(ahh....couldn't find my card reader)..so I've concluded that I have to change a new card...even though previously all the content inside works flawlessly. anyway....thanks all for the advices given.
I had that problem with an old microSD and my T810. Changing it with a new one (faster and best branded) solved the problem.
No more messages.
artdze said:
hmm.... I believe I have tried doing all the method mention before. no joy... formatting process unable to complete(using onboard programme), its only done half way before that message appear again....tried several times....still the same....can't format using PC(ahh....couldn't find my card reader)..so I've concluded that I have to change a new card...even though previously all the content inside works flawlessly. anyway....thanks all for the advices given.
Click to expand...
Click to collapse
There are two more method you can try, download the Panasonic SD formatter and use that program to format the SD card, or you can format the card using a old nokia phone that runs on the old S40 OS.
artdze said:
Hello guys...
On my device, this message constantly appears:-
SD Card
SD Card has been inserted
OK Go to myfiles
...any idea how to make it dissappear.
Thanks in advance..
Click to expand...
Click to collapse
I had a 16gb sandisk do this on my s2, swapped it yesterday for a newer, faster 64gb card and so far so good. I'd try a different card or buy a new one.
kms108 said:
There are two more method you can try, download the Panasonic SD formatter and use that program to format the SD card, or you can format the card using a old nokia phone that runs on the old S40 OS.
Click to expand...
Click to collapse
wow... I wanna give this method a try, looks very promising....
I can't guarantee that the SD formatter work,but it's. A very good program made by the SD association, but the Nokia one has a good chance, previously I has some dead micros, and some that will not detect, even on a PC, the nokia fixed it.