Related
I cant do anything with it anymore. when i first turn it on the cingular screen comes on and then it goes into the rainbow (bootloader?). how do i fix it from here now?
nimski62 said:
I cant do anything with it anymore. when i first turn it on the cingular screen comes on and then it goes into the rainbow (bootloader?). how do i fix it from here now?
Click to expand...
Click to collapse
You really need to post more information. Phone 'G' version, what ROM you were on before, service provider, whether or not you are certain your phone was unlocked (CID, etc). Otherwise, it is like asking 'why does it rain mainly on the plain in Spain?'
--M
How did you know it was a G4? Did you follow the instructions to the letter?
peraltah said:
How did you know it was a G4? Did you follow the instructions to the letter?
Click to expand...
Click to collapse
I was pretty sure that i had seen this username before. If you look for the thread labeled "Please fix the link. Rom is needed." you will find this user asking for the link to be fixed and in the next post you see somebody (brooks.nl) providing him/her with a link to a G4 ROM. I'd say that the OP didn't know that there were G3 and G4 phones out there and now we see the results. Just another case of RTFM. Sad really
Kirby
if you are in rainbow (color mode) = bootloader, then it shows to you IPL and SPL
If you have in the ednd of it .0001, then your device is still alive.. Just download any official ROM for your Device and connect it via cabel with PC and the go just like it is connected via Active Sync.
Active Sync is not running, but the flash would be OK and your device alive again
And what if the IPL and SPL are 1.03...... I've tried to downgrade to unlock the sim, but it failed. Since than I have got the rainbow screen.
Can anyone please advice me what to do.....
I know.........RTFM.......
If it was a G4...
If the IPL/SPL before you started had .0001 on them then you have flashed an incompatible bootloader into your G4 device and have bricked it.
If your device was 1.03 to start with then it is a G3 and you flashed a 2.xx rom into a 1.xx bootloader which again doesn't work (G4 safe roms do not include the bootloaders.) In this situation you can recover your device by installing an official 2.xx carrier rom into your phone. And never mix bootloaders again Once this is done if you are CID unlocked then you will be able to install a custom 2.xx rom of your choice.
G3 and G4 bootloaders are not interchangeable. More G4 phones have been bricked on this forum than really should have been for this very reason, read, read, read and when you think you have read enough, read some more. If you have a G4 device the only way that I have read on these forums to CID unlock was to pay a fee to a website to do it for you - Which many people have done and report that it works well.
If your device was a G3 to start with then you might be able to re-flash an official carrier rom (from your carrier) into the phone to revive it. Check their customer service/support website for that information on where to download a release. If you are a Cingular customer you can download this rom from the HTC website (don't know about other carriers)
Things you really should know before you flash:
1. Is my device a G3 or G4?
2. Is my device a G3 or G4?
3. Is my device a G3 or G4?
4. Is my device a G3 or G4?
5. Am I willing to have a failure that will leave me with a worthless piece of electronics?
6. Do I have a real NEED to upgrade or change roms?
7. Have I read and understand how to unlock my phone (if not going with a carrier rom from the carrier to which your phone is locked.)
8. Do I know how to boot into bootloader mode?
9. Do I have a backup plan for re-charging the battery if it becomes discharged completely -- Shouldn't be necessary but lots of people including me have made a mistake and gotten their phones in a state where it will not charge.
10. Do I understand how the flash process works, where will it pause, how long will it pause, can I go without my phone for this period of time?
11. Have I spent a good deal of time reading as many threads on upgrading/flashing/unlocking/identifying as I can in a 2 week period. If you just got your phone.
12. Have I backed up all the information on my phone that I may or will need once the flash is successful?
13. Have I read the entire thread on the rom that I wish to install to see what issues others have encountered while downloading, installing, running/using and how they fixed or worked around them?
14. Is my device a G3 or G4 and do I have the appropriate rom?
Really, the people here aren't trying to be rude or jerks, the problem is that most newcomers to the boards jump in with both feet without reading all of the very well written tutorials and fully heeding the warnings included with them, and invariably they all ask THE SAME questions, because they either A. don't know how to search (yes, we all know the built in search function leaves alot to be desired. -- Use Google) B. are too lazy to search/read and want to be spoon fed. C. really believe that they are the first person to have said issue.
The sad fact is that most people that brick their phones have no good reason to have upgraded in the first place.
I hope your phone was indeed a G3 to start with and you can revive it with a carrier rom. If not then this is a very expensive lesson, and I am sorry that you had to learn it like so many others this way.
Zzan said:
If the IPL/SPL before you started had .0001 on them then you have flashed an incompatible bootloader into your G4 device and have bricked it.
If your device was 1.03 to start with then it is a G3 and you flashed a 2.xx rom into a 1.xx bootloader which again doesn't work (G4 safe roms do not include the bootloaders.) In this situation you can recover your device by installing an official 2.xx carrier rom into your phone. And never mix bootloaders again Once this is done if you are CID unlocked then you will be able to install a custom 2.xx rom of your choice.
G3 and G4 bootloaders are not interchangeable. More G4 phones have been bricked on this forum than really should have been for this very reason, read, read, read and when you think you have read enough, read some more. If you have a G4 device the only way that I have read on these forums to CID unlock was to pay a fee to a website to do it for you - Which many people have done and report that it works well.
If your device was a G3 to start with then you might be able to re-flash an official carrier rom (from your carrier) into the phone to revive it. Check their customer service/support website for that information on where to download a release. If you are a Cingular customer you can download this rom from the HTC website (don't know about other carriers)
Things you really should know before you flash:
1. Is my device a G3 or G4?
2. Is my device a G3 or G4?
3. Is my device a G3 or G4?
4. Is my device a G3 or G4?
5. Am I willing to have a failure that will leave me with a worthless piece of electronics?
6. Do I have a real NEED to upgrade or change roms?
7. Have I read and understand how to unlock my phone (if not going with a carrier rom from the carrier to which your phone is locked.)
8. Do I know how to boot into bootloader mode?
9. Do I have a backup plan for re-charging the battery if it becomes discharged completely -- Shouldn't be necessary but lots of people including me have made a mistake and gotten their phones in a state where it will not charge.
10. Do I understand how the flash process works, where will it pause, how long will it pause, can I go without my phone for this period of time?
11. Have I spent a good deal of time reading as many threads on upgrading/flashing/unlocking/identifying as I can in a 2 week period. If you just got your phone.
12. Have I backed up all the information on my phone that I may or will need once the flash is successful?
13. Have I read the entire thread on the rom that I wish to install to see what issues others have encountered while downloading, installing, running/using and how they fixed or worked around them?
14. Is my device a G3 or G4 and do I have the appropriate rom?
Really, the people here aren't trying to be rude or jerks, the problem is that most newcomers to the boards jump in with both feet without reading all of the very well written tutorials and fully heeding the warnings included with them, and invariably they all ask THE SAME questions, because they either A. don't know how to search (yes, we all know the built in search function leaves alot to be desired. -- Use Google) B. are too lazy to search/read and want to be spoon fed. C. really believe that they are the first person to have said issue.
The sad fact is that most people that brick their phones have no good reason to have upgraded in the first place.
I hope your phone was indeed a G3 to start with and you can revive it with a carrier rom. If not then this is a very expensive lesson, and I am sorry that you had to learn it like so many others this way.
Click to expand...
Click to collapse
Congratulations you get it. This is a very well written piece that I hope all newcomers to this site read. Heck maybe we should make them read it before they can move forward. Just a thought.
Kirby
Zzan said:
If the IPL/SPL before you started had .0001 on them then you have flashed an incompatible bootloader into your G4 device and have bricked it.
If your device was 1.03 to start with then it is a G3 and you flashed a 2.xx rom into a 1.xx bootloader which again doesn't work (G4 safe roms do not include the bootloaders.) In this situation you can recover your device by installing an official 2.xx carrier rom into your phone. And never mix bootloaders again Once this is done if you are CID unlocked then you will be able to install a custom 2.xx rom of your choice.
G3 and G4 bootloaders are not interchangeable. More G4 phones have been bricked on this forum than really should have been for this very reason, read, read, read and when you think you have read enough, read some more. If you have a G4 device the only way that I have read on these forums to CID unlock was to pay a fee to a website to do it for you - Which many people have done and report that it works well.
If your device was a G3 to start with then you might be able to re-flash an official carrier rom (from your carrier) into the phone to revive it. Check their customer service/support website for that information on where to download a release. If you are a Cingular customer you can download this rom from the HTC website (don't know about other carriers)
Things you really should know before you flash:
1. Is my device a G3 or G4?
2. Is my device a G3 or G4?
3. Is my device a G3 or G4?
4. Is my device a G3 or G4?
5. Am I willing to have a failure that will leave me with a worthless piece of electronics?
6. Do I have a real NEED to upgrade or change roms?
7. Have I read and understand how to unlock my phone (if not going with a carrier rom from the carrier to which your phone is locked.)
8. Do I know how to boot into bootloader mode?
9. Do I have a backup plan for re-charging the battery if it becomes discharged completely -- Shouldn't be necessary but lots of people including me have made a mistake and gotten their phones in a state where it will not charge.
10. Do I understand how the flash process works, where will it pause, how long will it pause, can I go without my phone for this period of time?
11. Have I spent a good deal of time reading as many threads on upgrading/flashing/unlocking/identifying as I can in a 2 week period. If you just got your phone.
12. Have I backed up all the information on my phone that I may or will need once the flash is successful?
13. Have I read the entire thread on the rom that I wish to install to see what issues others have encountered while downloading, installing, running/using and how they fixed or worked around them?
14. Is my device a G3 or G4 and do I have the appropriate rom?
Really, the people here aren't trying to be rude or jerks, the problem is that most newcomers to the boards jump in with both feet without reading all of the very well written tutorials and fully heeding the warnings included with them, and invariably they all ask THE SAME questions, because they either A. don't know how to search (yes, we all know the built in search function leaves alot to be desired. -- Use Google) B. are too lazy to search/read and want to be spoon fed. C. really believe that they are the first person to have said issue.
The sad fact is that most people that brick their phones have no good reason to have upgraded in the first place.
I hope your phone was indeed a G3 to start with and you can revive it with a carrier rom. If not then this is a very expensive lesson, and I am sorry that you had to learn it like so many others this way.
Click to expand...
Click to collapse
DING DING DING, we have a winner!!!! Well put.
--M
WOW guys.. i didnt brick anything. It IS a g4, but i wasnt aware of the CID stuff. I guess it just did the bootloader thing bc those roms needed the device to be CID unlocked. i installed wizard love's rom onit and it seems to be working perfectly. I would just like to know if there is any other roms with a different radio version.. bc sometimes if i randomly look at my device it will have 0 bars. would a diff radio version fix this?
nimski62 said:
WOW guys.. i didnt brick anything. It IS a g4, but i wasnt aware of the CID stuff. I guess it just did the bootloader thing bc those roms needed the device to be CID unlocked. i installed wizard love's rom onit and it seems to be working perfectly. I would just like to know if there is any other roms with a different radio version.. bc sometimes if i randomly look at my device it will have 0 bars. would a diff radio version fix this?
Click to expand...
Click to collapse
Glad you got it working.
There are radio only roms that you can download and install but, I am not sure if you need to be CID unlocked to install them.
The latest Official Cingular radio and the one I am currently using (see my sig) are the ones I recommend.
These roms do not contain bootloaders, OS or extended rom so your settings are preserved when installing them and should be safe to install on a G4. But as always I would talk to someone/search through here for someone that knows more about flashing a G4 to see if you need to pay to get your CID unlocked.
you can flash the radio rom i flashed 2.47 radio rom and use the wizard love flash
okay so where exactly can i get the 2.47 radio rom?. also cant i use the risidoro ROM with my CID locked g4? or is that impossible?. where exactly would i find the 2.46 radio rom?
my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
jawnsixteen said:
my wizard is stuck at the ipl spl screen, i just tried to throm farias new rom on it even though it is cid locked (i used shelltool)
now this happened
ipl 2.26
spl 2.26
gsm 02.25.11
os 2.18.0.0
i dont even know how to enter bootloader mode, i searched the forums but its so hard to find things, im serious, it's a problem ive had before, any help and i would love you
Click to expand...
Click to collapse
reset and hold the camera button,you will see a 3 color screen...connect to the PC it should say usb in the bottom of the device screen....now install the latest update from your carrier.
PS
for future reference if you device is ended CID unlocked you do not need to use shelltools...just use the update utility provided by the rom.
also this info has been posted 1 trilion times
..........
Its not that hard to look at the stickies (thats were the really important stuff is located).
Here's a great post for you to use:
http://forum.xda-developers.com/showthread.php?t=298613
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and when i powered on it wasn't your rom it was the one i had on it before with some things different, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the shelltool thread and see if they can help me, i still can't get that to work.
thanks again
jawnsixteen said:
thank you faria, bwesty and mfrazzz. I got to the bootloader screen and reflashed it with the latest tmobile rom. I'm sorry ive been asking so many questions, but i've been getting some mixed answers.
like someone told me (ill give the link to prove it) that flashing the latest tmobile rom will cid unlock your device. Im pretty sure thats not the case. And faria i did your latest rom and it got stuck at 99%, and i figure thats because it's not cid unlocked
i did search the forums mfrazzz and it came to no avail. You're right, if i looked really hard i could have found it somewhere, deep in a thread, but what do you expect from someone who just thought he bricked his $400 phone?
there should be a section for itself titled "I just broke my phone, how do i fix it" And inside that thread there should be every way to fix every situation. And i dont mean buried, i mean in the first post. Just a thought, it would have really helped and stopped me from bothering you guys
But as for now im going to go to the sheeltool thread and see if they can help me, i still can't get that to work.
thanks again
Click to expand...
Click to collapse
A really useful thread (besides the WIKI is: http://forum.xda-developers.com/showthread.php?t=298613 it, by the way, is the very first item on the WM6 forum, this forum has Dr. P's EXCELLENT thread http://forum.xda-developers.com/showthread.php?t=285435 plus other useful stickies) It seems that your phone is 'working' after flashing the TMo 2.26, the first thing you need to do is find out if you have a G3 or a G4, then CID unlock appropriately. Skip the shelltool stuff for now, if you don't understand what phone you have, you will be on the road to "brick city".
--M
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
CID unlocking (as far as I know) won't void your warrantee--at least it hasn't voided mine (TMo US), but YMMV. That said, it isn't a bad thing to ask for help, (cross posting is generally frowned on) we like to help people who aren't lazy or stupid.
When you do post for help, generally the more info provided the better, but I sense you know that. If your phone is a G3, I am not really sure why you are seeking help in the G4 forum....anyway.
IMHO, Faria's WM6 works really well, and I haven't had serious issues with it. There are others that love different ROMs or will cook their own, great! Nottoosmart has a good looking ROM (a Mun derivative ROM) everyone will have an opinion, I know what works well for me. So "what is the best"? Hmm Faria's WM6 (for me).
--Mark
jawnsixteen said:
demontefixo thanks for the quick reply
but, i do know things about my phone, i just have little questions that no one really explains throughly. I know i have a g3, i know about cid unlocking and how to do it. I've into the registry on both my (ex) tmobile dash and now the mda. I'm currenty looking for the best new rom that i want to flash, but i can't void my warranty and that's why im using shell tools. I've been reading this forum for quite a while, and i don't consider myself a newbie (i cant control what other people think) but i do need help on certain areas, and im sorry for even needing that
Click to expand...
Click to collapse
While keeping your phone CID Locked does keep you from voiding your warranty in that respect, flashing a custom rom on your phone will technically void your warranty also (although unless do something nasty to it, you should be able to get it back to the official rom and with it still CID locked then you should be fine). Example: You flash the latest and greatest WM6 on your phone and then your USB connector breaks and your SD slot doesn't work. You now can't get back to WM5 so they will know if they look. Far fetched, but I'm just throwing it out that if you are really concerned about your warranty, flashing custom roms may not be a good thing. Don't get me wrong, I'm not trying to tell you not to do it, I'm just saying that doing pretty much anything in the upgrading and WM6 forums here is basically voiding your warranty. But I think in most cases, the carriers don't look that close.
And please ask for assistance when you have issues. There are so many posts though, its hard to tell who has really read and who hasn't sometimes. Just remember that the stickies at the top of the forums are your friends and there is really good info there to help you get unstuck (most of the time).
i love you guys
I just received my Cingular 8125 refurbed. I believe I have a G3:
IPL 2.25
SPL 2.25
ROM 2.25.11.1 WWE
I tried using lokiwiz2b and got the ERROR: ITWriteDisk - An internal error occurred.
After reading about 50+ posts, it seems I am not the only one, but again it seems lokiwiz worked for many.
Can someone help me here where should I start from ? How can I SIM unlock this phone to use it with other carriers ?
sunnye said:
I tried using lokiwiz2b and got the ERROR: ITWriteDisk - An internal error occurred.
Click to expand...
Click to collapse
You can't run lokiwiz .2b until you drop to a 1.xx ROM.
Please read, understand, and follow every step in this (and the posts it points you too) or you will kill your phone before the first day is out...
http://forum.xda-developers.com/showthread.php?t=298613
And rather than asking for how to do things, take some initiative to look around more. Just reading the Stickies at the top of the Wizard Upgrading and Wizard WM6 forums is enough to answer all of your questions. Also don't forget the Wiki. Everything you need (including SIM Unlocking) can be found here. We are willing to help, but we aren't willing to pick up the spoon and put it in your mouth for you
Also make sure to check the Wiki! Lots of useful info over there. (If you need any of the programs it talks about in the step by step posts let me know, I can reupload if your unable to get links to them)
mfrazzz said:
You can't run lokiwiz .2b until you drop to a 1.xx ROM.
Please read, understand, and follow every step in this (and the posts it points you too) or you will kill your phone before the first day is out...
http://forum.xda-developers.com/showthread.php?t=298613
And rather than asking for how to do things, take some initiative to look around more. Just reading the Stickies at the top of the Wizard Upgrading and Wizard WM6 forums is enough to answer all of your questions. Also don't forget the Wiki. Everything you need (including SIM Unlocking) can be found here. We are willing to help, but we aren't willing to pick up the spoon and put it in your mouth for you
Click to expand...
Click to collapse
Excellent thread link, I a regular at HF so know my way around there, but new to this forum so had a hard time looking for info. Thanks for the info.
Hi, i followed the instruction fro unlocking my device (Qtek 9100) and then installed IPL_SPL_3.08. After that i tried installing Crossbow_Reloaded_1.7_Final and my device rebooted and it now doesn't turn on! I tried removing the battery for a while but still... Is there anything i can do to save my device?
PS: i first installed a 2.xx IPL and SPL but then the "Crossbow_Reloaded_1.7_Final " would not load saying it was incompatible URR version or something similar, so i instaled IPL/SPL 3.08.
My device now won't start or charge. It seems dead Is there abything I can do about it?
thanks
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
thx for the reply.
Firstly i followed this guide:
http://forum.xda-developers.com/showthread.php?t=298613
And at the following step:
"0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4."
My device had 1.xx IPL/SPL and i used "Wizard_Love_2.26.10.2_WWE_Novii_CF2" to update it to 2.26. the procedure was successful.
I then CID-unlocked the device and then flashed to "AKU2" successfully once again.
I then flashed to IPL/SPL 3.08 (since i determined i had a G3 device ) and that's when y device did not start again.
Providing the above can anyone tell e wether there is any way of saving my device?
thanks
starkwong said:
If you didn't figure out your device is G3 or G4, and you can't even power on the device, then it is a brick now. (G4 Wizard cannot upgrade IPL/SPL)
You need to either recover it using JTAG or replace the unit if possible.
Click to expand...
Click to collapse
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
neochris said:
So it is possible to save my device by using JTAG? (which i don't know what it is yet, so i am going to search the forum a bit to find out).
Click to expand...
Click to collapse
dont put too much hope on this JTAG thing. It is still no details on this yet. Try getting the unit into bootloader mode (3 colour screen) and flash again if possible. If you are not able to get it in to bootloader mode, chances are, you have a bricked.
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
neochris said:
I took the device to an HTC service store but he said not to expect much and that i would probably need a new mobo. When i hear from him and if the news are bad i will probably try the JTAG thing. Does anyone have some info, links etc about JTAG for Qtek 9100? someplace to start from. If it IS bricked i might as well give it a shot.
Any recommendations always welcome.
Click to expand...
Click to collapse
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
titus666 said:
Someone posted in the forums in the past few days that they had successfully recovered a Wizard using JTAG, so there is hope.
Edit: The posts are here..
http://forum.xda-developers.com/showpost.php?p=1209390&postcount=137
http://forum.xda-developers.com/showpost.php?p=1209398&postcount=138
I suggest asking nicely for cesarr4 to share the info...
Also, sounds like you had a G3 (since you had a 1.x IPL/SPL to start with) and it sounds like the 3.08 IPL/SPL you flashed maybe was for G4 only..
Click to expand...
Click to collapse
Thanks titus666 . Now i got my hopes up again! I just caled the technician i took my wizard to and he told me there's nothing he could do. (he only could help if the device would turn on apparently, but if it would i could try doing that myself. Wasn't too helpful but i had to try. HTC specialist they say. anyway.)
I just asked cesarr4 for more info and hopefully i will gather enough info and try and fix it myself. Will post my results when i do.
thanks for the replies guys. Much appreciated
Diud you soled the problem?
9100 dead
What's happen?
First off apologies if this has already been addressed i've looked through the forums and not found it.
Just used the unlock prog from olipro and whilst the the phone is now unlocked the screen is now messy, (garbled)
anyone had this before? i tried running the process again but got the same thing
SimonEdwards2003 said:
First off apologies if this has already been addressed i've looked through the forums and not found it.
Just used the unlock prog from olipro and whilst the the phone is now unlocked the screen is now messy, (garbled)
anyone had this before? i tried running the process again but got the same thing
Click to expand...
Click to collapse
you should mention it at oli's thread
your device SPL has been updated and windows is not compatible with it
flash new ROM
As per above post this should be posted in Olipro's thread
Check your SPL is compatible with rom, i.e. you may need to flash a new rom
Thread closed