I use BlueAngel
my GPS device works perfectly with Win2003SE but it doesn't work with WM 5.0
I've tried almost BA's Rom but the problem can't solved
How to fix it ?
Thanks in advance !
What software you try? I use Mio Map 3.2, BT GPS is configured on COM6
viscocesco said:
What software you try? I use Mio Map 3.2, BT GPS is configured on COM6
Click to expand...
Click to collapse
It's still doesn't work, what do rom version you use and how to config it
Its really simple,
1. You have to pair with your device
2. [checkbox] Serial Port
2. Set Outgoing port
-> Now you should be able to connect to this COM port
3. Navigate to Settings->Connection->GPS
4. Set HW COM port to your Outgoing por
5. Set GPS Program port to free COMport
thank guy
problem has solved
Related
Hello!
Where I can download mtty for Trinity?
http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
I have SPL-1.01 MFG, but......
USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000
:F=C:\finalsplash.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
Click to expand...
Click to collapse
On this step, process stoped
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
you have to use mtty 1.16 for the lnb command to work.
Take it from here:
ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
pof said:
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
Click to expand...
Click to collapse
Say me, please ROM adress for Trinity!
Sorry, my English very bad....
lvsw said:
Say me, please ROM adress for Trinity!
Click to expand...
Click to collapse
sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands
Problem using mtty
I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?
pof said:
you have to use mtty 1.16 for the lnb command to work.
Click to expand...
Click to collapse
Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.
yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?
can't get MTTY to connect w/ Trinity
dr-jo said:
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
Click to expand...
Click to collapse
Not that I think it should matter much but in case it does I'll say first that I'm running a PC w/ Vista and not xp or earlier.
Anyway, I can't get MTTY to connect to my Trinity.
The only port that MTTY can open is my Com3. All other ports, inluding the one titled "USB" can not open.
When I have MTTY open on Com3, there is no response to any command so I suspect although the application is occupying the port, it is not communicating w/ the Trinity.
Can anyone provide some insight here or tell me the correct com port settings (parity, baud, stopbits, etc)?
Thanks,
J
I tried MTTY on my WinXP notebook as well. I get the same situation. I downloaded a freeware terminal emulator application also but wasn't able to establish coms w/ the Trinity either.
Can someone confirm their com settings in MTTY?
The same thing has happened to me on p3400i, the New Gene, followed the guide at XDA to every letter, though I knew my device was a new Gene. Now the mtty program opens with some settings window instead of the USB button. Only port accessible is COM3. Flashed and bricked by Olipro SPL.
Hi,
I'm trying to enable my BA (Helmi/Baniaczek R2) to use WPA encryption with my Netgear router.
Can this be curently enabled? If not, is there someone (Baniaczek?) who could add suppot for WPA (and replace WEP) in this ROM?
Thanks
DEVICE: BA (Orange SPV M2000)
ROM: Helmi_BA_WM2k5_AKU3[1].5_v1.4.CF2.R2
RADIO: 1.15.00
With my router, Netgear DG834GT, BA works well with WPA protection enabled.
Great. Thanks. I set it up and all works perfectly.
I get the same problem i cant connect with any security on
isnt there any other software to conntect rather can using the windows software
Did you check that the shared key is exactly the same? Some apps need the hex version of the key, so try that.
If you do not connect all then this could be an access list problem (based on the MAC address of your PDA). Check this.
If yu provide more info about the problem it will help...
HTH
Hi All ..
It's so nice could join in these forum .. I need a help from your the expertise
My Problem:
I cannot do connecting to my computer when the USB for my PC insert to Computer ..
I've tried to follow some instructions that appear on the mobile but it still same the same ..
I need it to upload any data from my computer to my mobile, such as MP3 and some photos ..
I'm sorry for my simple questioned
Mine:
Xda II
Windows Vista
ROM Version: 4.20a40CS
ROM date: 08/31/07
Radio Version: 1.17.00
Protocol Version: 1337.28
Your prompt feedback will be appreciated
Thanks,
"I need it to upload any data from my computer to my mobile, such as MP3 and some photos .."
you could always copy them to a SD card untill the issue is fixed
ipenzyu said:
I cannot do connecting to my computer when the USB for my PC insert to Computer ..
Click to expand...
Click to collapse
Did you checked "Advanced communication" in USB connection properties in "Settings -> Connections" ?
"Did you checked "Advanced communication" in USB connection properties in "Settings -> Connections" ?"
Yes I did, I've checked for it .. but it's still cannot be connecting to My computer ..
Could you advice me for "Microsoft activesync" ?? even I've click to open this software but it still as same ..
thanks for the help ,,
ipenzyu said:
Could you advice me for "Microsoft activesync" ?? even I've click to open this software but it still as same ..
Click to expand...
Click to collapse
Ummm... I don't understand, what you're asking for...
Remember that with WM6 you need ActiveSync 4.5. Check your firewall, too - wcesmgr.exe and wcescomm.exe need to be unblocked.
i had the same trouble, Start>Settings>Connections>Usb to Pc>tick Enable advanced network functionality
Nojahoda said:
i had the same trouble, Start>Settings>Connections>Usb to Pc>tick Enable advanced network functionality
Click to expand...
Click to collapse
Why dont u Use Wm5torage......the USb is working fine with me..
chk out this rom..its cooked by me
Read More here : http://forum.xda-developers.com/showthread.php?t=328438
Download here : http://www.megaupload.com/?d=MS86R7ZP
ipenzyu said:
Hi All ..
It's so nice could join in these forum .. I need a help from your the expertise
My Problem:
I cannot do connecting to my computer when the USB for my PC insert to Computer ..
I've tried to follow some instructions that appear on the mobile but it still same the same ..
I need it to upload any data from my computer to my mobile, such as MP3 and some photos ..
I'm sorry for my simple questioned
Mine:
Xda II
Windows Vista
ROM Version: 4.20a40CS
ROM date: 08/31/07
Radio Version: 1.17.00
Protocol Version: 1337.28
Your prompt feedback will be appreciated
Thanks,
Click to expand...
Click to collapse
Since your are using Windows Vista, you would need Windows Mobile Device Center 6.1 installed on your PC in order to sync your device with your PC USB or Bluetooth. You can download it from here:
http://www.microsoft.com/windowsmobile/devicecenter.mspx
When i recived a sms, the wm6 doesn't advise me in any way, so i don't realice that i got a message.
Also the hima doesn't wake up when a msg is incoming.
Is there any applet like the smsfix from wm5?
Many thanks
PD:: This is the best rom i've ever seen... Thanks to Helmi&Tofclock
my Wifi show that my diamond is connected with my router. however, when i use internet explorer try to accesss to google/yahoo, the following message pop up:
"The page cannot be found. Check the name and try again"
i have double check and i am sure i enter the right address www.google.com/www.yahoo.com
i dun understand why this message pop up even thought i have connected wid my router. i am upgraded my router firmware to the newest one!!!!!
Rouer type is : Netgear Rangemax
Channel: 6
Region: United States( i am living in Uk and the router do not let me change the region to UK)-(i dun think this is the problem as my Ipodtouch connect with my router and work perfectly)
Mode: B and G( i have downgrade from Auto 108mbps)
Security option: WPA-PSK [TKIP]
any1 plz kindly help me wht wrong wid the diamond or router---> the main reason i buy diamond is to connect wifi!! thank!!
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Bellacluchy said:
Same Problem here.. i've just updated my diamond with the newest software release ( HTC_GER_2.03.407.2) from the HTC Website.
The Diamond detects the WLAN, and connects after entering the key.
But i think the main problem is that i cannot select anything under "connect with" when i'm in the network setup.. There's only a white box :-(
I attached a screenshot from an other user there it's ok..
In my case there's nothing to select under "Verbindet mit"
Click to expand...
Click to collapse
i have upgrade the rom to the excatly same as ur, i try to connec to my university wireless and still cant use the WIFI, i think the problem is on the diamond, not on the router!!!!
dosado said:
Hi,
Try changing the default network for Internet connections...
Go to settings -> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network
Cheers,
David
Click to expand...
Click to collapse
hi, yes, i am chek it and it is connect using : My Work Network. i dun knw wht wrong with it and i am thinking of refund!!! the main reason i buy this is to connect wifi but it dun seem to be working!!!!
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible..
I stopped the assistend at first run and configured my MMS setting manually.. WLAN works now!
Click to expand...
Click to collapse
hello, can u tell me excatly wht should i do? it is possible to disable that "Verbindungs-Setup" witout hard reset??? hard reset will it erase all my picture music etc plus the current ROM?? cuz i didnt know how to update the rom and the current rom is one of my friend update for me!!!!!
Bellacluchy said:
I experienced following :
If i set up the wlan connection directly after a hard reset it works !
The problem is the connection manager "Verbindungs-Setup" that starts automatically..
This first run autostart item asks for your network carrier.. after selecting and applying the selection this assistent overwrites the existing wlan bindings. After this no more binding to the wlan is possible.. And it don't works too if you first run the "Verbindungs-Setup" and then the WLAN Setup.. Even to create a connection manually with the "> connections --> advance --> select networks --> Programs (...) Internet should connect using: My Work Network" is not possible!
I stopped the assistend at first run and configured my MMS and UMTS setting manually.. WLAN works now!
Click to expand...
Click to collapse
can u plz tel me wht to do. thnx!!
i do not know which registry entries the Connection Setup Wizard changes..
You can make a backup of your ROM with SpriteBAckup, then HardReset and Restore the Backup with Merge Level 1 of Sprite Backup. The Internal strorage will not be deleted by a hard reset!
Comm Manager - seting - WIFI - 3-d page and slider to the left
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
duncho said:
The problem is in the ROM. I have this issue only if connecting to WiFi using WPA2-PSK (TKIP). All other protocols work. Upgrade your Diamond with any other ROM and it should work. I had problem with Dutty's v3.4 and also Nataly v2.0.1.
Click to expand...
Click to collapse
can u tell me how to update the rom step by step plz!! and where can i find d ROM?? thnx u!!!
It is not the ROM issue.
I have the same problem. I updated the ROM, but the problem exists as before.
Sometimes my phone connects the internal modem and not my WiFi network, why?
Ps.: I am using WIFI router for internet (WPA-PSK [TKIP])
On my mobile I am facing problem where in I am not able to use activesync when I am connecting to PC. I have tried different machines and cables as well. not sure if the ROM which I have installed has done anything...
ROM Version - DONsalariROM WWE
Radio version - 1.13.25.24[/COLOR]
if the phone is set to act as usbdrive for the pc you need to disable that to connect to activesync