Related
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Is my fone a lemon? I did the upgrade to WM 5 Crossbow 3.0 upgrade for my friend 8125, downgrade it to 1.1 RUU ROm, cid unlock then upgrade to 2.XX and then did the 3.0 upgrade and everything when well. I don't know why my 8125 after the 3.0 rom upgrade the OS still show 2.X I have done 2 upgrade and both was success all except my phone. Any help will be great. You peeps rock
Mine is doing the same thing
hksmr2 said:
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Click to expand...
Click to collapse
Did the Wizard reboot each time you ran the lokiwiz .2b?????
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
canadian student said:
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
Click to expand...
Click to collapse
Did you use the method in my sig? Please do it again, slowly, each step. I've personally unlocked around 60 G3 8125 and MDA's this way... never not it not work.
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
canadian student said:
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
Click to expand...
Click to collapse
If you got all the T-Mobile crap when you installed that 2.26 I'd think you were OK. For fun download the latest Faria ROM at ftp://xda:[email protected]/Wizard/Roms/faria-roms/ ... I'm running the 8MB as we speak.
Good luck!
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
canadian student said:
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
Click to expand...
Click to collapse
you're kidding, right?
I have never worked with RAR files before, i'm a total noob I know. When I click on it asks me what program do i want to open this up with.
I got it I got it, thank you very much.
This guide was written a long time ago. I recommend people to use this more up to date guide:
Wizard Windows Mobile 6 for newbies
I've got a lot of post behind my name, but most of my posts are answers to the same questions over and over again. It seems very hard for "noobs" to find the answer to their question quickly on the forum. I quickly wrote a little step by step tutorial for them. Hope it helps!
Suggestions or corrections are always welcome.
You want to flash your wizard, but don't know where to start. Try this:
0. First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4. Go to step G3.1 if you got a G3 and G4.1 if G4.
G3.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G3.5, NO go to step G3.2
G3.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). If you got IPL/SPL 1.xx go to G3.3. If you got 2.xx go to G3.4
G3.3 Download button rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.4 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G3.5.
G3.5 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G3.7, NO OR DON'T KNOW go to step G3.6.
G3.6 Follow this great thread by Dr Puttingham: The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards. Don't skip step 17! Flash the T-Mobile 2.26 Rom! Go to step G3.8 if you got the T-Mobile rom with IPL/SPL 2.26 on your device after doing this.
NOTE: Some people seem to have problem with flashing the button rom in this step (stops at 98% with error 302). Replace button_rom with Xda_MiniS_LaunchROM_v154102 and follow the rest of the steps normally when this happens!
G3.7 Download T-Mobile 2.26 rom and flash it to your device! Done? Go to step G3.8.
G3.8 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise! It wasn't that hard, was it? If you still got an older OS version after flashing then you're not CID-unlocked! Go back to start!
------------------------------------
G4.1 Does you're device start normally (yes) or is it stuck on the three-colored bootloader screen (no)? YES... go to step G4.4, NO go to step G4.2
G4.2 Turn off you're device totaly. Remove the SD card and disconnect the USB cable from you're device. Turn on the device while holding the camera button. You will get into bootloader mode (3 colored screen). Connect the USB cable to the computer and you will see USB at the bottom of your screen above the left softkey (Activesync will not connect in bootloader mode, but you can flash from this screen!). go to G4.3
G4.3 Download wizard_love rom and flash it to your device. Your device should startup again after doing this. Go to G4.4.
G4.4 Is your device CID-unlocked (note: it's not the same as SIM-unlocked!)? YES... go to step G4.7, NO OR DON'T KNOW go to step G4.5. (note: CID-unlocking a G4 is only possible by paying for it at imei-check!)
G4.5 Download enable-rapi.zip. Transfer Cert_SPCS.cab and EnableRapi.cab to your phone. Run Cert_SPCS.cab FIRST and EnableRapi.cab SECOND. Turn your device off and on or wait 5 minutes before soft resetting. Done? Go to G4.6.
G4.6 Follow this great thread by the-equinoxe: [solution] G4 SoftSPL Flash any ROM to CID locked G4 [UPDATED] and load the softSPL on your device using his method. Make sure you take a G4 safe rom (see the thread for details). After the steps you'll have the rom of your choise on your device!
G4.7 You're reade to flash the AKU2, AKU3, WM6 rom of you're choise IF the rom DOESN'T contain IPL/SPL. AKU3 and WM6 roms normally don't contain IPL/SPL. If you want to flash an AKU2 rom, make sure you take the G4 version. If you get an error 300 (invalid update tool) while trying to flash your device look at this thread!
NOTE: If you tried to flash a G3 rom with IPL/SPL in the rom on a G4 you probably will have a bricked device! DON'T flash the new 3.08 and 3.09 IPL/SPL to your G4!
NOTE2: If you got problems flashing with softSPL: Follow this great thread by mun_rus: Solutuion found: how to flash any rom to CIDLOCKED DEVICE. If your device won't start after flashing you can use step G4.2 and G4.3 and try again. Also look at this thread by eddieitman: Faria G4 Step by step installer with instructions to make sure you did all the necessary steps!
Nice one.
One thing I've found is since the Mods split the WM6 stuff to a seperate forum a lot of noobs are in that forum and they don't see the stickies over here now (I've had a couple PM me directly asking where this Wizard Upgrading forum is at that I refer to in my posts ). So I think we need some stickies like this or something in the WM6 forum (or a sticky at the top of that forum with a pointer to this forum and maybe certain posts over here).
Nice. Maybe we should add a link in the Wiki to this...
--M
Corrected the links to wizard_love.... they didn't work.
I found this solution much better than shelltool for flashing my G4 CID-locked Wizard:
http://forum.xda-developers.com/showthread.php?t=271043
Shelltool can only flash the OS while using this modified RUU you can task the OS, splash screen, and the radio. Plus this modified RUU will also flash Wizards that do not bootup normally.
You can't flash a touched OS that way in a CID-locked G4.... only some 2.26 roms will work. Trying this with WM6 will go to 100%, but you're "old" OS will startup again.
Say i downgrade my phone to the T-mobile ROM but have a cingular phone...do i need to have my phone SIM unlocked to use it or since i changed ROMS it doesn't matter...
JBLaze407 said:
Say i downgrade my phone to the T-mobile ROM but have a cingular phone...do i need to have my phone SIM unlocked to use it or since i changed ROMS it doesn't matter...
Click to expand...
Click to collapse
SIM Unlocking only allows you to use SIMs from a different carrier on your phone.
CID Unlocking allows you to flash different Carrier / Country roms on your phone.
If you are only CID Unlocked, you can flash Tmobile, Cingular, Qtek, etc on your phone, but your device will still connect to the same carrier that your SIM is setup for. So for me, I'm on Cingular. I flashed the TMobile 2.26 ROM and I have the complete TMobile look and feel, but my carrier and phone connection was still Cingular since thats what the SIM is for.
I always flash the TMobile 2.26 rom on my phone now before upgrading to a new custom ROM. Its more stable (IMO) than the CIngular 2.25 (at least numerous issues I used to have went away by doing this, but then the custom ROM may be really fixing that, but I like having the latest IPL/SPL for my base).
As always... YMMV
mfrazzz said:
SIM Unlocking only allows you to use SIMs from a different carrier on your phone.
CID Unlocking allows you to flash different Carrier / Country roms on your phone.
If you are only CID Unlocked, you can flash Tmobile, Cingular, Qtek, etc on your phone, but your device will still connect to the same carrier that your SIM is setup for. So for me, I'm on Cingular. I flashed the TMobile 2.26 ROM and I have the complete TMobile look and feel, but my carrier and phone connection was still Cingular since thats what the SIM is for.
I always flash the TMobile 2.26 rom on my phone now before upgrading to a new custom ROM. Its more stable (IMO) than the CIngular 2.25 (at least numerous issues I used to have went away by doing this, but then the custom ROM may be really fixing that, but I like having the latest IPL/SPL for my base).
As always... YMMV
Click to expand...
Click to collapse
Thany you very much for the info...
nice work....stiky.....
could someone post the above info in wiki..... so we can redirect questions to wiki.
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
bogdatov said:
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
Click to expand...
Click to collapse
Good question.... have you flashed T-Mobile rom before? If you haven't you will get the strong 2.26 IPL/SPL. It prevents many problems! This step is to prevent people to upgrade to WM6 with other IPL/SPL!
bogdatov said:
If I have CID-unlocked G3 T-Mobile Wizard with custom WM5 ROM installed .... why do I need to downgrade to T-Mobile 2.26 ROM before going to WM6 ?
Click to expand...
Click to collapse
You want to downgrade so that it cleans up things that are possibly left from a previous install. The Official ROMs have everything (IPL / SPL / OS / Radio / Extended ROM / etc). If you go straight from a custom rom to another custom rom you may find you have stuff left over because the new custom rom doesn't clean up everything. I've seen where things are left in the message queue, so you start getting pop errors about not finding something when that was on the previous ROM.
While it takes extra time, flashing back to an official rom gives you a clean base for the custom rom to work off of. Well worth it for me so I always do this. Takes an extra 15 mins or so, which is better than wasting a day chasing some issue that wouldn't have been there.
BTW: Congrats on getting your post promoted to a Sticky!
mfrazzz said:
You want to downgrade so that it cleans up things that are possibly left from a previous install. The Official ROMs have everything (IPL / SPL / OS / Radio / Extended ROM / etc). If you go straight from a custom rom to another custom rom you may find you have stuff left over because the new custom rom doesn't clean up everything. I've seen where things are left in the message queue, so you start getting pop errors about not finding something when that was on the previous ROM.
While it takes extra time, flashing back to an official rom gives you a clean base for the custom rom to work off of. Well worth it for me so I always do this. Takes an extra 15 mins or so, which is better than wasting a day chasing some issue that wouldn't have been there.
BTW: Congrats on getting your post promoted to a Sticky!
Click to expand...
Click to collapse
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
pdagenius said:
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
Click to expand...
Click to collapse
Good question. I don't have a G4, but I'd think the same would hold true to get a stable / clean base for the new custom rom.
pdagenius said:
Is it also recommended that a downgrade to T-Mobile 2.26 is followed for unlocked G4 phones?
Click to expand...
Click to collapse
NO! that rom has IPL/SPL in it. Don't try flashing this rom onto a G4! It could brick your device!
thanx a lot !
Great job vippie!
I've updated my thread to reference this.
Please update the first post
Hi Vippie,
Can you please update the first post so that when you tell people to get to the bootloader screen that Activesync will NOT connect, but if it says USB above the left softkey that it is connected? This is something I've had to tell people over and over. People see that activesync doesn't connect so they stop and don't go any further.
Thanks! And again, excellent work on this guide. I'm pointing people to this now as I like how its laid out and gives G3 and G4 info in one place (since so many newbies don't think its important to tell us what they have or anything)
BTW: Has this been put into the Wiki?
mfrazzz said:
Hi Vippie,
Can you please update the first post so that when you tell people to get to the bootloader screen that Activesync will NOT connect, but if it says USB above the left softkey that it is connected? This is something I've had to tell people over and over. People see that activesync doesn't connect so they stop and don't go any further.
Thanks! And again, excellent work on this guide. I'm pointing people to this now as I like how its laid out and gives G3 and G4 info in one place (since so many newbies don't think its important to tell us what they have or anything)
BTW: Has this been put into the Wiki?
Click to expand...
Click to collapse
Good one.... updated the starting post! Thnx!
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??
Hi... I have a Tmobile MDA (HTC Wizard) phone with the latest MDA ROM (2.26.10.2) on it.
What I would like to know is if I can download the Tmobile Wing (HTC Herald) ROM from Tmobile website and flash it to my MDA? Would it work or brick my MDA? Would I need to do CID unlock before loading the Wing ROM?
I checked and I have a G4 MDA. Hardware-wise both the phones are similar.... I would like to have WM6 on my MDA without having to go thru the flashing process.
Appreciate your help.
does anyone have any idea?
Search under the Windows Mobile 6 subforum for "boring ROM"....
Last line of original post-"I checked and I have a G4 MDA. Hardware-wise both the phones are similar.... I would like to have WM6 on my MDA without having to go thru the flashing process.", yes...they are similiar, but NOT the same! The Wings ROM WILL brick your MDA, ESPECIALLY since it is a G4. We have plenty of WM6 and WM6.1 ROMs here for your enjoyment. And about the wanting to upgrade without flashing...well, that is not possible! You HAVE to flash a new ROM in order to upgrade to a new version of Windows Mobile.
Thanks @ashasaur. I understand that I need to flash the ROM which will erase everything on the phone and load the new OS. I went thru some stickies and found out the process and have seen some G4 safe ROM version like TNT/Slim/BlackDiamond on the forums... would try them out.
One last question... incase if I have to revert to original WM5 Tmobile ROM... can I do that ? If so how ?
If you wanted to revert to the factory WM5 ROM not going to be a problem. You can go to T-Mobile's website and download the 2.26/2.26/WM5 ROM. It is the latest official T-Mobile ROM upgrade available for the Wizard. Here is it: http://www.t-mobile.com/wmupgrade/
Also if you do a lot of flashing it is recommended that you always flash back to an official ROM before you switch to a newer WM6/WM6.1 ROM.
For example, I had TNT 6.1 but wanted to upgrade to WM6.1 Slim 4.0. Here are the steps:
1) Backed up all data
2) Flashed down to T-Mobile 2.26 ROM
3) Flashed to WM6.1 Slim 4.0
4) Flashed the radio ROM I wanted (UK 2.19)
5) Flashed the IPL/SPL ROM I wanted (3.08/3.08)
6) Restore backed up data
Best way to backup and restore your contacts, SMSes, etc is FdcSoft's PPCPIMBackup. You can find it here in forum.
yes, that is a good system, but for G3 devices! When flashing a G4, DO NOT EVER flash ANY IPL/SPL to your phone or it WILL become a brick.
@ashasaur... I was planning to flash the Slim v4.0 on my G4 MDA (it says it is G4 safe). Do I need to flash a radio ROM too? Isnt it part of the Slim ROM ?
I have backed up my data using the dotfred's PIMBackup (v2.8)
yes, the Slim v4.0 is indeed G4 safe...im using on my G4 right now ASAF. You can flash a new radio ROM if you wish, but it is not required, the radio ROMs are a different part of the system, and not included with the regular OS ROMs...newer radio ROMs give better reception for some, but they are not required when flashing a new OS ROM.
Thanks @ashasaur... I plan to flash on weekend... will post my results here ... One more question... since you already have Slim 4.0 on your Wizard... do you see any issues specially regarding Bluetooth, Wifi, GPRS/EDGE (I have Tmobile Web plan)? Thanks.
Hey, I got a MDA compact IV branded from tmobile, but its starting to get on my nerves, and I want the original theme, so I figured I've got to put a new ROM on, now what rom is the best for a Dutch tmobile MDA compact Iv?
thanks in advance
i use A.Z.T.O.R. X2 (V11)Ultimate NLD based on latest Official ROM
you can find it here :http://forum.xda-developers.com/showthread.php?t=422417
there aren't many dutch roms, but this is probably the best one.
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
VerusAmos said:
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
Click to expand...
Click to collapse
I also got a MDA Compact IV...since 2 weeks I run the aztor v11 rom, and man what a difference. Much faster.
Just try..
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Ok, I've tried two times to do the update as I just ran the [exe] file on my PC, but I get the [262] update error.
When it updating the bar sticks on 0%, as well on my phone. Luckily after detaching the battery for 3 seconds, my phone just soft resets. What now???
I've done some research but with all the different versions and languages I got really confused. I need another spl to install the [nbh] in order to update the X2 update. But I cant find a way to run the [nbh] file.
I'm also afraid that I'll ruin my MDA. So I searched for a original spl and ROM, but I can't seem to find the right one. I also unable to determine which spl I have on my MDA. It should be a dutch T-Mobile ROM (& spl???). The warranty period isn't over yet so I might need it. (But I hope not of course).
This flashing thing is really confusing...
Same problem
I have exactly the same problem trying to change the ROM from uk vodaphone to Duttys V4. The strange thing for me is that I have 2 Diamonds (his and hers) and the first one went through the process like a dream.
I'd be very grateful to find a fix
VerusAmos said:
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Click to expand...
Click to collapse
First I ran Olinex hard-spl 1.40, after that I rename the .nbh file tot DIAMIMG.NBH, copy that file to your internal storage and than flash from the internal storage. Read this
If above is still abacadabra send me a pm, then I will translate this in dutch.
best rom questions?
to find out whats best for you is to start flashing.
this question is not welcome here on this forum.
as it always end in a flame war.
thread closed.