I have downloaded Terra Term to backup my MDA to SD card but I dont see any USB option to connect and I have used mtty.exe and with that when I use USB connection and hit ok it get an error message saying that " USB port can not open" can anyone help me dowloading the correct version or suggest me what to do.
Related
Hello!
Where I can download mtty for Trinity?
http://wiki.xda-developers.com/uploads/mtty.exe not working!!!!
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
I have SPL-1.01 MFG, but......
USB> task 32
Level = 0
Cmd>lnb C:\finalsplash.nb 500e0000
:F=C:\finalsplash.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
Click to expand...
Click to collapse
On this step, process stoped
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
you have to use mtty 1.16 for the lnb command to work.
Take it from here:
ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
pof said:
BE WARNED THIS ROM ADDRESSES ARE FOR HERMES, NOT FOR TRINITY... flashing the wrong address can brick your device!
Click to expand...
Click to collapse
Say me, please ROM adress for Trinity!
Sorry, my English very bad....
lvsw said:
Say me, please ROM adress for Trinity!
Click to expand...
Click to collapse
sorry I don't have a Trinity and I don't know what is the ROM layout on it, you can investigate yourself capturing the output of the RUU while flashing a rom with usb monitor, dumping rom parts with rbmc bootloader command, and dumping mmu and parts of mem from gnuharet... but it's a long process until you manage to get all the addresses correctly. You have to compare what you get from the device with the *.nb file extracted from the NBH to see where each part of the ROM starts. Can't really do this without having a Trinity on my hands
Problem using mtty
I have some ploblems using mtty.... I deselect "connect to USB" in pc activesync, then I connect the pocket pc on the usb cable, then I start mtty and I select USB.... I have a the mtty window in which is written CLIENT then, again, CLIENT, and the pocket pc... CONNECTING TO USB... and this situation remain without any changement.... where I am wrong?
pof said:
you have to use mtty 1.16 for the lnb command to work.
Click to expand...
Click to collapse
Actually, the LNB command must be implemented in the bootloader to work. If you connect to Trinity using any version of MTTY (from 1.10 to 1.46) and type LNB, it will just give an "Command error!!!" message.
yes, but seems to be implemented on the MFG bootloader version that is left on the device after unlocking it with imei-check unlocker, isn't it?
can't get MTTY to connect w/ Trinity
dr-jo said:
Hello, so that its it functions is necessary to neutralize (wcescomm.exe) ActiveSync and then to select port USB in mtty.exe.
Click to expand...
Click to collapse
Not that I think it should matter much but in case it does I'll say first that I'm running a PC w/ Vista and not xp or earlier.
Anyway, I can't get MTTY to connect to my Trinity.
The only port that MTTY can open is my Com3. All other ports, inluding the one titled "USB" can not open.
When I have MTTY open on Com3, there is no response to any command so I suspect although the application is occupying the port, it is not communicating w/ the Trinity.
Can anyone provide some insight here or tell me the correct com port settings (parity, baud, stopbits, etc)?
Thanks,
J
I tried MTTY on my WinXP notebook as well. I get the same situation. I downloaded a freeware terminal emulator application also but wasn't able to establish coms w/ the Trinity either.
Can someone confirm their com settings in MTTY?
The same thing has happened to me on p3400i, the New Gene, followed the guide at XDA to every letter, though I knew my device was a new Gene. Now the mtty program opens with some settings window instead of the USB button. Only port accessible is COM3. Flashed and bricked by Olipro SPL.
Hello, I can't get RUUwrapper to work, I always get a error message (see attchement) sometimes it error 202 or 246. USB connection is working I used cheetahunlocker and that worked at least the first part. I also did the USB driver update that was mentioned in some forum if you had USB connection problems with Vista.
Any ideas how to proceed? Can I just upload the 6.1 update to my SD card?
Please advise
Peder
use the SDcard update method... it's faster and safer...
But that's just my opinion...
I just did the SD update and it was working great,
Thxs
i've got a qtek 2020i
but something went wrong with an upgrade downloaded from qtek netherlands.
now i can't turn it on it doesn't work anymore
in teh screen i can read
serial
v1.01
or when in the cradle usb
plz help out here i can't fint it with active sync.
inreally need the damn thing. it's like losing my right hand
it came with winmobile 2003 ce
maybe i need a more resent version.
I am not an expert by any means but the fact that it switches to USB when cradled means it should be reflashable with a new ROM, search the o2.ie site for their most recent ROM. Not saying their offering is the most recent but it should get you going again
i searched but i can't find anything.
i don't know were i can find it
and if i do how does it work?
my telephone is using Orange / T mobile
Ok I had the same problem recently and managed to fix it using mtty.exe, and a working flash file.
The procedure goes like this:
Get mtty.exe, ( I found a copy on a file sharing site using google ).
Open Activesync and disable the USB option in connection settings, you'll need the usb port for mtty.
Put the device in the cradle, and check that it says USB , (it may say serial 1.01 at this point, don't worry, this happened on mine).
Run mtty.exe, and select USB, this will open a terminal window allowing you to communicate with the device. If you don't see USB as an option then exit mtty and try plugging the USB cable into another port.
Once you have the terminal window open, type task 28 and press enter, this will format the DiskOnChip.
Once this is complete and there are no errors, exit mtty, and run the upgrade, this should hopeully restore your Alpine.
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
hi, when Rocket Rom 7 (ics) came out, i installed it. after doing this, when i connected my phone to the pc, the system detects the phone as Samsung_android and shows 2 removable drives in the system. however, if you click on them they dont work
it no longer detects my phone as GT-N7000
what i have noticed: when i connect the usb cable, the phone doesnt show "MTP connection" anymore... instead, it shows USB connected.
what has been done:
flashed rocket rom 10, nogo
reinstalled kies: nogo
reinstalled win7 (yes i actually did that even tho testing on other pcs showed the same issue)
the phone still charges and the only way i can connect my phone to d pc to view files is by clicking "usb storage"
any advice on this?
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
dr.ketan said:
Uninstall kies, and just install driver (find latest from toolbox on my signature)
use different USB port, and dont use any extensor cable to connect device.
Click to expand...
Click to collapse
hi bro... didnt work... i dont think its the driver... its the phone... coz i tested another note, its working fine
My Galaxy Tab has similar issues. I believe it would be due to the architechture of the ROM forcing you to have to mount your device to your computer before being able to load the Device Internal SD, and the External SD.
Click USB Storage when it shows, this should pop up a window which has a Lil android dude, and USB Storage Message with a button stating 'Turn on USB Storage'. After clicking it, you can click 'Turn Off USB Storage' to unmount the device.
thanx for that.. hehe.. i stumbled across it the other day.. at least i can transfer files... but just dont like the fact its not showing...