Hello, I can't get RUUwrapper to work, I always get a error message (see attchement) sometimes it error 202 or 246. USB connection is working I used cheetahunlocker and that worked at least the first part. I also did the USB driver update that was mentioned in some forum if you had USB connection problems with Vista.
Any ideas how to proceed? Can I just upload the 6.1 update to my SD card?
Please advise
Peder
use the SDcard update method... it's faster and safer...
But that's just my opinion...
I just did the SD update and it was working great,
Thxs
Related
I have downloaded Terra Term to backup my MDA to SD card but I dont see any USB option to connect and I have used mtty.exe and with that when I use USB connection and hit ok it get an error message saying that " USB port can not open" can anyone help me dowloading the correct version or suggest me what to do.
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
i've made the same wrong thing like you ... 5 days to find it out.
1. dont have a rom on your storagecard (well not in the root)
2. put the hardspl.exe on the desktop of your pc (also dont have a rom on the desktop)
3. start the hardspl.exe on the desktop with the usb pluged in.
and it will work and you will feel like me "like a dump noob".
SO YES - YOU HAVE TO START THE X1_HARDSPL.EXE FROM YOUR BLOODY PC, LAPTOP, ETC AND NOT FROM YOUR X1
Bennieficial said:
I have been using the X1_HardSPL_Utility program. My phone has always had a good connection with Windows Mobile Device Center (ie, whenever I plug it into the USB port, it automatically syncs). I follow the steps in the program, but when it launches the bootloader program on my x1, it just stays at the "Loading..." screen. Then I get an error from the hardspl program that says something about my phone isn't connected to WMDC. After I disconnected and rebooted my phone, now my phone can no longer be detected by WMDC when I plug it into the USB port. How can I fix this problem so that I can Hard-SPL my phone? or are there alternate methods, such as through the Micro SD card?
Click to expand...
Click to collapse
I had the exact same problem.
You need to:
Disable your internet connection(wifi/lan)
disable your virus detection and windows firewall (and any standalone fire wall you have)
Remove you MicroSD card
run hardspl (it should now complete the operation)
And flash to what ever rom you like (using the SD card method)
Re-enable your firewall/virus detection/internet connection (In that order)
thanks!! i got it working just fine now thanks to both of you guy's help!
ok one more problem. I am not able to get my X1 synced with WMDC anymore, just as it was doing before my failed attempts at Hard-SPLing my phone. How do I fix this?
ok do you have now the hardspl on the phone?
IF yes - it will sync.
1. dont connect the phone
2. delete the "Partnerschaft" in english perhaps the team in WMC (means delete the phone in MWC).
3. connect the phone it will say a "oh new phone" - give him the sync possibilities and it's done.
took a bit time the first time...................just checked it right.........hm got also problems.....yesterday it worked because he copied the changes ........but today!
is it available?
VarioIII said:
is it available?
Click to expand...
Click to collapse
How to get HTC Sync working
I NEED HTC Sync Software for my PHONE, not my PC
it is possible. i opened a thread few days ago.
I got the files from other ROMs.
Install them in your phone like you install apps
Wait for a while or restatr your phone.
and you need Sync for your PC.
here is the files you need.
doesnt work with APPSInstaller. How do i install it?
Try using command prompt
you must have Sdk tools on your pc
so it can read your phone
go to the directory were this 2 files located unzip them .
easiest way just put them on C: or on D:
than open commad promt from your PC i thik you know what it is
check first does it read your phone type
"adb devices"
it should show you your drvices serial number. if it ok.
type
"adb install sync.apk"
it will install the first file
"adb install pcsii.apk"
it will instal your second file.. and everything will be ok
Thanks, I was looking for this as well.
Just flash my Magic to hofo v1.1.1. Need to sync with PC, thanks for the file.
Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
I'm running Cyanogen 4.0.4
Any ideas?
I'm also looking for a solution to this problem - plenty of rom cookers remove the sync software, but I've yet to find anyone that can tell me how to FIX it.
Like the previous poster, when I install the three required files (sync.apk, pcscii.apk and pcscii.odex), I get the error mentioned. Surely someone has a way to fix this?
Merlinux said:
Doesn't work for my Vodafone Magic
When i plug my usb cable in it says: "Sorry! The application PC Synchronization (process com.htc.android.psclient) has stopped unexpectedly. Please try again.
Click to expand...
Click to collapse
Right. Doesn't work either on a Vodafone Magic with org. ROM same error. You're only able to sync with google apps.
its honestly not worth it
Push Sync software to Sapphire 32A
Hello,
To proceed with RUU from the carrier, the HTC sync connection needs to be estabilished, am I right?
In order to do this, I used the files from the previous poster ruslanriad.
However, It unexpectedly crashes, no matter if I use fastboot install mode or .apk installation through the file browser.
How can I get it up and running?
I'm using Magic Orange 32A with 1.33.2010 HBOOT and 6.35 radio. Current ROM is FroyoRider_Switch_6.35_34_v1.0.
Hello folks. I'm having an issue getting Microsoft ActiveSync to read my G1 via USB. I've tried uninstalling and reinstalling the driver for the G1, I've tried uninstalling and reinstalling ActiveSync, GRemoteServer, on both my G1, and on my PC, and am unable to get them to communicate in order to run GRemoteServer from my phone. My G1 has Cyan's latest 4.2.3.1, 512mb ext3, 96mb swap.
My device will connect for regular exchanges with the PC through USB, such as file transfers and what not, but ActiveSync will not read it. When I try to connect, it shows my ports, coms, and USB, but next to USB status, says error.
Any hellp would be appreciated. And if you need more info, please let me know. Thanks in advance!
Didn't see anything in the rules about Bumping a thread. So...Bump...
I'm an idiot. G1 doesn't support ActiveSync...thanks anyway.
I have definitely got the blue angel. It is an O2 Xda 11s.
I have downloaded the how to flash your BA pdf by D-Two, and followed the instructions. It gets through to the stage where it's about load the software onto the phone, and then it quits saying that he phone is not the appropriate model.
device information
Operator version: PDAViet.net
ROM version: 6.01.10 VH
ROM date: 07/08/08
Radio version: 1.06.00
ExtROM: diamond (01)
RAM size: 128 MB
Flashing eyes: 32 MB
Storage size: 60.3 MB
At present I have windows mobile 6.1.
And suggestions please?
for upgrading, you use the MAupgradeut_noID.
that program avoids country id errors but it was originally made for the magician, hence MA, whereas the original BA upgrade utility is called BAupgradeut.
that is why you get that error. you have to put the device into bootloader mode before connecting it to the pc and before starting maupgradeut_noid, that way, you avoid the device id check.
make sure to follow the correct upgrade procedure, found here: http://forum.xda-developers.com/showthread.php?t=630416
These are the instructions I used;
Temporarily remove your SD Card (it may work for you with the SD card still in your BA, but you may not be able to enter USB mode when cradled).
Put your device into Bootloader mode by pressing and holding the "Power" & "Record" buttons, and then press the Reset Button. Help me with this step
Connect the phone to the sync cable/cradle. sarcasm ahead Note: Did you see a sign out in front of this point that said: "You can flash using BlueTooth connection?" You know why you didn't see that sign? Because you can NOT FLASH using BlueTooth!
Now you can execute the installer file. (something like "MaUpgradeUt_noID")<--------------- Used This
Here is the screen just before boarding the software.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba1.png
And here is the error message.
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/ba2.png
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Chef_Tony said:
nope, you are not using the proper maupgradeut_noid, because that would show a magician on the left, whereas your pictures clearly show a BA, so download the Chef_Tony RUU from my signature and try that. it has the right maupgradeut_noid, that will avoid errors like that.
Click to expand...
Click to collapse
yep, you were right,,,,,,, BUT same error message;
http://i627.photobucket.com/albums/tt356/Pterodactyl_2012/xda4.png
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Chef_Tony said:
you are trying to flash using vista/7 have you read d-two's manual about that, with the customized driver and everything?
alternatively try a windows xp pc and follow the tutorial in my signature (the read first link)
and make sure, that you don't copy around the rom too much. download the rom and the ruu directly to the pc you flash from and use it from that folder directly. i use windows 7 on my main pc and can only flash from my netbook which runs windows xp, and due to too much copying, i had similar errors, because after copying the rom to a usb flash drive without problems, still the crc changed.
don't worry, your case is far from hopeless, but you seem to be unlucky and go through every problem there is
Click to expand...
Click to collapse
Okay yes, I should have said this. I am using windows seven on a Lenovo N500 4233 32g. The problem is, trying to get hold of an XP machine. Have you tried running this programme in compatibility mode? I will have a look at your instructions and see where I get to.
Thanks for your help,
Is d-two's manual, the HTC service manual in you sig?
no, it is to be found here: http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
compatibility has nothing to do with it, neither has the xp mode or any virtual machine, because there must be suitable windows 7 drivers present. but i cannot help you with his tutorial, since i use windows xp for flashing and have never successfully used windows 7 for flashing.
the htc service manual in my sig is the official htc manual for hardware repairs, you can learn to disassemble the device there and have a list of spare parts