Swapping Battery problem - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've seen this in the wiki page..
Q: Whenever I swap my battery, the clock will be reset and become inaccurate. I still haven't found a solution yet.
A: Hardware issue, not related to WM6.
Click to expand...
Click to collapse
If im going to send this to service center, will they just cost me a big $$$..??
Will they change the whole mother just for the battery??
because my warranty is expired.. and im afraid they cost me too high just for this battery issue..

Any experts idea?..

Hi,
I posted that question. Nevertheless it was due to WM6 ROm. I did not have that problem while using other ROM 2.26.
Is your problem happened after upgrading to WM6?

I didnt check..
because my wizard is a second hand..
after i bought it i rushly go home and upgrade to crossbow.. havent check it before..
but are you sure it is only because of the ROM wm6?
why other users using crossbow doesnt have this problem..

GreatWizard said:
why other users using crossbow doesnt have this problem..
Click to expand...
Click to collapse
don't they?
i have it!

So i guess we have a wrong information in the wikipage that says its hardware related not in WM6..
Any other users who have this problem in crossbow?

any phone will lose time info after removing the battery.. how do you think it will count time if there is no other battery inside =)

before i have o2 XDA II wich has a backup battery and everytime i remove the batery dates and clocks stay..
Wizard also have a backup battery..
thats why im wondering why the dates and clock reset everytime i remove my batery

indeed.. there is a little battery in wizard.. just found
http://www.thout.tweakdsl.nl/batt.jpg

GreatWizard said:
I didnt check..
because my wizard is a second hand..
after i bought it i rushly go home and upgrade to crossbow.. havent check it before..
but are you sure it is only because of the ROM wm6?
why other users using crossbow doesnt have this problem..
Click to expand...
Click to collapse
I am sure about that. I used to run T-Mobile 2.26 ROM and other customised ROM based on WM5 and did not have that problem. It happens only after upgrading to WM6.

i also have this issue...i just dont take the battery out anymore...

I have it also, using wm5 not crossbow

Related

BA WM5 Boot Logo (Stripes) changeable ?

I upgraded to WM5, but now I just have the stripes as my boot logo.
Is it possible to change these to something else ?
Tried various bootlogo changers, none seem to work.
Have you tried searching the forum? I think there has to be 10 threads that says that's impossible so far... :roll:
yes, I did.
I found this, which seems to indicate it might be possible:
http://forum.xda-developers.com/viewtopic.php?t=29897&highlight=wm5+boot+logo
I found this which says it is a program to do it on a himalaya:
http://forum.xda-developers.com/viewtopic.php?t=12898&start=100
(see end)
So that is why I posted. I am a net veteran and know to look before I ask thankyou very much.
No, they don't indicate any such thing. As of yet there's nothing that even whispers about the possibility of changing the boot image on this trial run of a WM5 version. The bootloader actually isn't even exclusive for the unit, if I remember correctly it has references to at least 3-4 other models. There are a few ideas, but nothing that has come to anything more.
Bstard said:
sorry, it's made 4 himalaya with wm5, don't know if it works with other devices.
Click to expand...
Click to collapse
This is in reference to the file "BstardWM5Splash.cab" that he posted on the same thread - the thread is entitled "CHANGING MDA III BOOT IMAGES TO YOUR LIKING"
Now unfortunately this guy then goes on to say that this file is for a Himalaya, but the post two after that by Mardanpet seems to be saying it works on his XDA IIs. I cannot tell who he is saying it worked to though.
So Bstard is saying for SURE he can do it on WM5 on a Himalaya.
And Mardanpet APPEARS to be saying it can be done on a BA.
evilc said:
Bstard said:
sorry, it's made 4 himalaya with wm5, don't know if it works with other devices.
Click to expand...
Click to collapse
So Bstard is saying for SURE he can do it on WM5 on a Himalaya.
And Mardanpet APPEARS to be saying it can be done on a BA.
Click to expand...
Click to collapse
Well it works for BlueAngels, but under wm2003,
So still nothing that works with BA under WM5. Really, isn't there more important stuff to get in? A screen you see maybe once or twice a week (at least that's about how often I see it with WM5 - I saw it a lot more with WM2003). Who cares?
I see it daily. I have to change SIMs
Besides, with my luck, something will happen to my phone again and I will have to send it off to O2 for repair.
Last time I did that, I had a cooked imate rom but had uploaded an O2 startup screen, so they didn't spot that it was a different OS and they repaired it under warranty (despite the fact that I had voided it by replacing the OS)
If they see the stripes I am screwed. They will flag an issue on that for sure !
Mastiff said:
So still nothing that works with BA under WM5. Really, isn't there more important stuff to get in? A screen you see maybe once or twice a week (at least that's about how often I see it with WM5 - I saw it a lot more with WM2003). Who cares?
Click to expand...
Click to collapse
Yey, wm2005 is stable. but due all that testing it becomes quite irritatable that striped screen.
BUT, i noticed, that when you insert owner info info in the device, and at the options when turned on are on.
the windows mobile screen pops up after the rom version,
At least a bit better then 20sec those lines on my screen.
:twisted: i wished we could change that second screen :twisted:
I may be inclined to go with that if it didn't spam me with my details every time I turned the screen on.
At boot is good enough for owner info - it is on the today screen anyway.
well spotted though pimbo
evilc said:
I see it daily. I have to change SIMs
Click to expand...
Click to collapse
Ouch! With the boot time of this stuff it would make me crazy!

qtek 2020i ph10c screen will not align after hard reset

Hi i am new to this site so hello peeps...
Anyway i have had my qtek 2020i for about 3 months now and apart from the odd reset (that i have done) its been a useful tool.
Now the other morning it decided to have a freak out and the start menus locked up. I tried to do another reset but nothinge changed..
Now my dilemma is....i performed a hard reset and now the screen will not align...it asks me to tap to set up my device and i start tapping the little crosses but it will not work..i seem to be tapping the crosses for ever with no luck. Can anybody help?
thanks in advance.
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Danny-B- said:
Sounds like "Take it back to the shop" time to me.
Something far wrong mate.
Click to expand...
Click to collapse
spot on simple logic i suppose cheers geez
hehe, you could try a rom update or reflash, might be a problem with the rom
I got the new unit it was working fine......then i restored the backup that my last phone took before it went away and guess what....the problem returned :evil: .
Anyway i reflashed the rom with the qtek one and its sorted. :lol:
What is the best rom in your eyes for the alpine device?
The last O2 ROM with Pugs adaption, the 1.3 radio included.
Search for Pug it should come up with a link to his rom.
The newest O2 rom has an older radio version(1.0) because it has Blackberry support (which i will never use)
I am hardly recommend 1.04 radio version. It solved 3 issues for me and made my phone recieve signal better! This is "must have" version of radio!

My Wizard keeps rebooting!

Hello people,
I'm new to posting on this forum so please go ease on me I've been reading the forums for quite some time now, since i have my wizard (back in June i think). That is when i unlocked and flashed my Wizard with a WM6.1 rom. And this was succesfully, i'm very happy with it and never had any problems, hooray!
So far so good, but this all changed untill recently. Some weeks ago, my Wizard started acting funny, it kept rebooting at random moments. It's not in a loop or something, it just reboots on random moments. In calls, in games, in the menu, just random.
Now i know this is not a software problem, since i never changed any software after flashing and i also have these random reboots when in bootloader....
Can anybody help me with this?
I should also note that i suspect my battery, since it looks old, slightly bulged out but most importantly, my battery life is normal when not calling, but after a call the battery can be drained from 100% to 30% with just one short phone cal..
/edit: Just had another reboot, this time i looked at the battery meter....It was full when i turned on the phone, and now it says my battery is empty...Now i really suspect the battery Just want to rule out anything else
I had similar issues - and the battery was the culprit. Get a new battery, your troubles should go away
Did you also happen to have other problems, regarding calling itself? My friends complain a lot about my not picking up my phone or reading text messages, and when i check my Wizard the calls are not there.....and a lot of people calling me get my voicemail directly when calling me, that shouldn't happen :/ All this when i have full reception :S Could this also have something to do with the battery? My guess is not but i sure hope so, that would solve two problems at once
Johrizz said:
Did you also happen to have other problems, regarding calling itself? My friends complain a lot about my not picking up my phone or reading text messages, and when i check my Wizard the calls are not there.....and a lot of people calling me get my voicemail directly when calling me, that shouldn't happen :/ All this when i have full reception :S Could this also have something to do with the battery? My guess is not but i sure hope so, that would solve two problems at once
Click to expand...
Click to collapse
Those are more than likely software related issues. Can be the rom itself, or the radio version you are using.
Which WM 6.1 did you flash, can you provide some details as to IPL/SPL - radio version, etc ??
For instance, my IPL / SPL is 2.26
My radio version is 2.26 also
Had a very similar experience to yours myself. A new battery fixed the problem. I dunno about that bulging battery of yours... sounds a bit ominous.
bill_in_mtl said:
Those are more than likely software related issues. Can be the rom itself, or the radio version you are using.
Which WM 6.1 did you flash, can you provide some details as to IPL/SPL - radio version, etc ??
For instance, my IPL / SPL is 2.26
My radio version is 2.26 also
Click to expand...
Click to collapse
Erm let's see, i also flashed the IPL/SPL and radio software after the romflash, IPL/SPL is now 3.08 and GSM (radio?) is now 02.25.11. I think it used ti be 2.26 before flashing. As for the rom, i can't remember. I did some searching on the forum and i think it's [02 Jul] Wm.6.1 Os.19588 - Dutch - Beta! wich can be found here: http://forum.xda-developers.com/showthread.php?t=393841&highlight=dutch
Johrizz said:
Erm let's see, i also flashed the IPL/SPL and radio software after the romflash, IPL/SPL is now 3.08 and GSM (radio?) is now 02.25.11. I think it used ti be 2.26 before flashing. As for the rom, i can't remember. I did some searching on the forum and i think it's [02 Jul] Wm.6.1 Os.19588 - Dutch - Beta! wich can be found here: http://forum.xda-developers.com/showthread.php?t=393841&highlight=dutch
Click to expand...
Click to collapse
I took some time and went through the threads for the Dutch Beta, but am limited by my language. I flash english versions only - so not much help I am afraid.
I would recommend you post your dropped and missed call issue directly into the rom you identified above - others may be having - or had similar issues and a quick easy fix is available.
But in the end - you need a battery for sure
Good luck
Okay, just ordered a brand new battery today wich should arrive tomorrow by mail When my Wizard proves to be stable i will flash a new ROM and see if that fixes that problem as well Many thanks for your help
P.S: I'm looking for a battery cover and a stylus, since my battery cover is missing one hook (so it won't close perfectly) and i never had a stylus since i bought my Wizard from a friend, who lost it
Hey Johrizz,
You should be able to find a stylus and battery door on google shopping and / or ebay. I just ordered a pack of stylus's for a couple bucks and a dollar for shipping. I've seen battery door's for sale for about 8-10 dollars... Just make sure to notice the shipping charges LOL.
I don't know if it's really required but here's what I tend to do with a new battery and have had good success.
1) for the first charge (and anytime I'm going to flash a new ROM) charge it fully (till the light is green and not orange) with the AC charger and not the USB / computer cable.
2) flash a stock operator rom and test it for a day or so to make sure the Wizard doesn't have some other hardware problem, weird battery drainage, etc.
3) Once you're sure that your Wizard is stable and FULLY CHARGED Flash your favorite ROM
Good luck with it!

W 6.5 Roms: Keyboard Problem

Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Is it laggy and slow in every program? For me it works very well. Only thing is my m-key is kinda broken, not a software issue i figure though.
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
That's how my m-key is broken, one in ten times it types two Ms on one press. But it isn't like that on any other character.
kanchigo said:
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
Click to expand...
Click to collapse
it's not located in a specific rom... every 6.5 rom create the problem.
@jablko yes, every program...
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
exactly the same to me.
l0rdsheva said:
exactly the same to me.
Click to expand...
Click to collapse
same here, altough I had the same problem at my original WM 6.1
Same issue
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
I have experienced same issues like you did. The Fn key works only when I put lot of pressure on it (didn't succeed to determine which is the most suitable position) so, I've been forced to find other alternatives (soft keyboards). But, what's important is to find out if this is a hardware problem or is simply related to the new ROM installments which I play with...
Any opinion/suggestion is more then welcome...
Thanks
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
oh let me tell you something real that is happening.
1.keyboard is crap if u dont use the buttons daily ,you will have this problem(i have it too)
2. same as my camera button( i press half way to auto focus and then press it fully to take a picture. but now it auto focus and when i press fully,the camera will auto focus again and shoot the pictures )
i dunno what is wrong with X1 ,but htc has make a bull**** things for SE.(happy that SE decided to leave them).
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
l0rdsheva said:
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
Click to expand...
Click to collapse
Now that's hardcore!
Jablko said:
Now that's hardcore!
Click to expand...
Click to collapse
no problem, it's already out of warranty and if it goes wrong is time to buy another device!
crava said:
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
Click to expand...
Click to collapse
I reached to the same conclusion like you did. Seems like most of the SE X1 keyboards have problems, as well like the battery life (btw, last night, in stand-by mode, my X1 battery drained out completely without having any process/program running)...
Speaking about SE X1 in general, yes could be taken as a kind of failure but we don't have to forget is made by HTC. So, they could be blamed as well for this lack of success!
Or maybe there was also a sabotage around, who knows?
time to get X2

Strange Slow Down Issue

hi
plz tell me if any one hv solution for this.
I hv m1000 wid Broken screen which i hv replaced today and updated my m1000 from WM5 to WM6. But the Start Menu takes 20-25 seconds to pop up. All other Menu like Tap and hold are also taking same time to popup. volume Bubble aslo hv same issue and there is no sound. Every thing else is working fine like file explorer, other programs , phone ETC.
I hv tried these
1. Switch back to old LCD .(No luck)
2. Switch back to different wm5 and wm6 rom. (same issue)
3. Switch back to wm3 Rom.(Every thing works well)
4. Too many Hard Reset.(no luck)
5. Battery Removal for long time.(no luck)
6. DOC re partitioning.(no luck)
GOT MY DEVICE FIXED
Thanks to all here for their support. I got my device fixed. Problem was in my New Lcd it has a faulty Belt which only works if some pressure is applied on it so i putted a rubber behind it and now it is working. But bad luck is that i hv given the Positive feedback for that LCD on ebay.
hi
Ye i had the same issue. Keep reflashing until a rom gets to a decent speed then reflash back to the rom you want.
Or it might be that the rom is not for himalaya?
Definately keep reflashing.
it worked with me
BTW: The rom in the signature picture is wrong i think.
My rom is WM 6.5 CE OS 5.2.23409.5.4.0 by zjw831
Screenshot below
flyboyovyick2k9 said:
hi
Ye i had the same issue. Keep reflashing until a rom gets to a decent speed then reflash back to the rom you want.
Or it might be that the rom is not for himalaya?
Definately keep reflashing.
it worked with me
BTW: The rom in the signature picture is wrong i think.
My rom is WM 6.5 CE OS 5.2.23409.5.4.0 by zjw831
Screenshot below
Click to expand...
Click to collapse
Thanks for ur reply.
I hv reflashed alot but the problem is still there But One of Ather's Rom is working little good. at that rom Start Menu is working But no Sound and Other POPUP Menus are still Very Slow.
And signatures are not wrong cause i hv 4 devices.
it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that
Ather said:
it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that
Click to expand...
Click to collapse
hi bro
i hv tried a Pdaviet Rom now all the things r working except Sound. if i play a mp3 file media player shows Error that "device attached to system is not functioning". And if the device is loose or tight it will also not worked wid WM3. it is working flawlessly wid WM3.
Ather said:
it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that
Click to expand...
Click to collapse
Sounds like a faulty RAM to me, too. Or some other hardware issue. Worn battery?
muckelmaus said:
Sounds like a faulty RAM to me, too. Or some other hardware issue. Worn battery?
Click to expand...
Click to collapse
hi nd thnks for ur support.But how a faulty device works in WM3.and will a faulty Ram behave differently with diff. roms?
It´s because diffent parts of the memory are used. Look at aeroflylubys kitchen. He has got an equal issue with broken ram. He can´t flash/use WM6.5 anymore. On WM 6.1 everything works fine. Strange, but not impossible! Good Luck.
PS: As Senior I guess you know how to hard reset, as it differs from Wm2k3!
hey I hv just open my device nd chk for any physical damage. But nothing is there. And after re-assembling
1. Sound Works.
2. No slowdown at all.
3. Backlight Goes permanently off. (during boot also)
I hv tried the wm3 rom now it has sound but no backlight and no TOUCH in wm3.
krishan2207 said:
hey I hv just open my device nd chk for any physical damage. But nothing is there. And after re-assembling
1. Sound Works.
2. No slowdown at all.
3. Backlight Goes permanently off. (during boot also)
I hv tried the wm3 rom now it has sound but no backlight and no TOUCH in wm3.
Click to expand...
Click to collapse
It is a hardware issue, for sure!
Check the wires between TS and MB, but be carefull. One mistake and you will wreck your device!
yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide
Ather said:
yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide
Click to expand...
Click to collapse
thnx but I hv the pdf. and i hv dropped that idea to fix the m1000.
Ather said:
yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide
Click to expand...
Click to collapse
Yes, please! Give us that link, as hardware problems are nor rare these days!
http://mikechannon.net/PDF Manuals/Himalaya Service Manual.pdf
Source :
http://www.mikechannon.net/page1.html

Categories

Resources