I upgraded to WM5, but now I just have the stripes as my boot logo.
Is it possible to change these to something else ?
Tried various bootlogo changers, none seem to work.
Have you tried searching the forum? I think there has to be 10 threads that says that's impossible so far... :roll:
yes, I did.
I found this, which seems to indicate it might be possible:
http://forum.xda-developers.com/viewtopic.php?t=29897&highlight=wm5+boot+logo
I found this which says it is a program to do it on a himalaya:
http://forum.xda-developers.com/viewtopic.php?t=12898&start=100
(see end)
So that is why I posted. I am a net veteran and know to look before I ask thankyou very much.
No, they don't indicate any such thing. As of yet there's nothing that even whispers about the possibility of changing the boot image on this trial run of a WM5 version. The bootloader actually isn't even exclusive for the unit, if I remember correctly it has references to at least 3-4 other models. There are a few ideas, but nothing that has come to anything more.
Bstard said:
sorry, it's made 4 himalaya with wm5, don't know if it works with other devices.
Click to expand...
Click to collapse
This is in reference to the file "BstardWM5Splash.cab" that he posted on the same thread - the thread is entitled "CHANGING MDA III BOOT IMAGES TO YOUR LIKING"
Now unfortunately this guy then goes on to say that this file is for a Himalaya, but the post two after that by Mardanpet seems to be saying it works on his XDA IIs. I cannot tell who he is saying it worked to though.
So Bstard is saying for SURE he can do it on WM5 on a Himalaya.
And Mardanpet APPEARS to be saying it can be done on a BA.
evilc said:
Bstard said:
sorry, it's made 4 himalaya with wm5, don't know if it works with other devices.
Click to expand...
Click to collapse
So Bstard is saying for SURE he can do it on WM5 on a Himalaya.
And Mardanpet APPEARS to be saying it can be done on a BA.
Click to expand...
Click to collapse
Well it works for BlueAngels, but under wm2003,
So still nothing that works with BA under WM5. Really, isn't there more important stuff to get in? A screen you see maybe once or twice a week (at least that's about how often I see it with WM5 - I saw it a lot more with WM2003). Who cares?
I see it daily. I have to change SIMs
Besides, with my luck, something will happen to my phone again and I will have to send it off to O2 for repair.
Last time I did that, I had a cooked imate rom but had uploaded an O2 startup screen, so they didn't spot that it was a different OS and they repaired it under warranty (despite the fact that I had voided it by replacing the OS)
If they see the stripes I am screwed. They will flag an issue on that for sure !
Mastiff said:
So still nothing that works with BA under WM5. Really, isn't there more important stuff to get in? A screen you see maybe once or twice a week (at least that's about how often I see it with WM5 - I saw it a lot more with WM2003). Who cares?
Click to expand...
Click to collapse
Yey, wm2005 is stable. but due all that testing it becomes quite irritatable that striped screen.
BUT, i noticed, that when you insert owner info info in the device, and at the options when turned on are on.
the windows mobile screen pops up after the rom version,
At least a bit better then 20sec those lines on my screen.
:twisted: i wished we could change that second screen :twisted:
I may be inclined to go with that if it didn't spam me with my details every time I turned the screen on.
At boot is good enough for owner info - it is on the today screen anyway.
well spotted though pimbo
evilc said:
I see it daily. I have to change SIMs
Click to expand...
Click to collapse
Ouch! With the boot time of this stuff it would make me crazy!
Related
joey jojo said:
i just have one problem, when typing on my keyboard, sometimes, not all the time, keys stick and after pressing a key i get something like thissssssssssssssssssssssssssssssssssssssssssssssssssssssss
is this fixable??, is anyone else having this problem???
Click to expand...
Click to collapse
I'm having this problem. And the sms delay on writting too. It is a real annoyance 'cause I can not write nice poems to my love anymore. :?
But I think would be better to open another thread. So I'm doing it...
PD: the prooooooooooooooooblemmmmmmmmmmmm with words repeating were showing on 2003SE also....
i also get it but only on wm5
annoyance
c'mon, people, nobody with a solution???
I have the same problem.
Some programs in WM5 tend to take up processor cycles, and appear to be causing the problem.
Problem is, there are MANY possible programs (causes).
For me, the most common cause is Internet Explorer. Go to "Memory" in Settings, and close all tasks. Then try using the keyboard again. If it works, then you know that's the cause. Then, you can try to narrow down the program that's the processor hog.
Good luck!
turn down the repeating speed, it is in start>settings>keyboard>repeat settings. set it low so it will not repeat like that
First of all, thanks for your answers!
TheGadgetGuy said:
Some programs in WM5 tend to take up processor cycles, and appear to be causing the problem.
Click to expand...
Click to collapse
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
TheGadgetGuy said:
Go to "Memory" in Settings, and close all tasks. Then try using the keyboard again.
Click to expand...
Click to collapse
At no avail. Doesn't work...
obiesoft said:
turn down the repeating speed, it is in start>settings>keyboard>repeat settings. set it low so it will not repeat like that
Click to expand...
Click to collapse
I think you mean: start>settings>system>keyboard>Repeats setting
Doesn't work for me either. The sliders are on its lowest position...
Didn't you guys are having this havoc on your devices??
I don't know what is happening with my baby
Any Ideas??
Maybe a little fix.
Also had a problem about the words repeating thing.
But that time my device is downclocked to 299mhz by that time.
I did a soft reset first then overclocked my device to 531mhz.
after writting a message it seem to have improved significantly.(But it still lags
for a second or half sometimes.)and the words repeating seems to be gone.
But im not totally quite sure.Still need to check it more.And tell you how's it going.
O and lastly im just wondering how come it's soo slow to open a message and switch to other messages?Unlike 2003 se which only takes a second or soo......
I'm using pocket hack master to over/downclock my device.
XDAIIS
Re: Maybe a little fix.
Ok, i'll try that....
brentchua said:
Also had a problem about the words repeating thing.
But that time my device is downclocked to 299mhz by that time.
I did a soft reset first then overclocked my device to 531mhz.
after writting a message it seem to have improved significantly.(But it still lags
for a second or half sometimes.)and the words repeating seems to be gone.
But im not totally quite sure.Still need to check it more.And tell you how's it going.
O and lastly im just wondering how come it's soo slow to open a message and switch to other messages?Unlike 2003 se which only takes a second or soo......
I'm using pocket hack master to over/downclock my device.
XDAIIS
Click to expand...
Click to collapse
arieltools said:
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
Click to expand...
Click to collapse
The reson for the redraw, I think, is the number of characters in the message display at the bottom (i.e 1/168)
If I write an email the redraw problem is not present - if I swith to SMS it comes back...
Yeah, a clever think would be to switch this counter off. I haven't found it on the registry, nor a hack.
My question: if before it was ok, why change it?
Well anyway it is not the only reason for this word repeating problem. It appears on other programs also.
And no solution yet
Haven't had time to try brentchua solution...
ulfthomas said:
arieltools said:
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
Click to expand...
Click to collapse
The reson for the redraw, I think, is the number of characters in the message display at the bottom (i.e 1/168)
If I write an email the redraw problem is not present - if I swith to SMS it comes back...
Click to expand...
Click to collapse
What worked for me was to turn off the "suggest words when entering text" option. You'll find it in settings - personal - Input -Word completion...
dblfun said:
What worked for me was to turn off the "suggest words when entering text" option...
Click to expand...
Click to collapse
Yeah, at the end we will have a very advanced phone capable of doing nothing useful because everything has to be turned off... :evil:
(suggest words, bluetooth, AD2P, Wireless, Video frame problems, slow phone answer, etc, etc, etc, etc, etc :evil: :evil:
stop complaining... if u don't like it just downgrade back to 2003 se and everything will work. You should realise that the blue angel wasn't made for WM5. That it works with WM5 is great...but as long as there is no official release u shouldn't complain..... It's just the way it is...
dblfun said:
stop complaining... if u don't like it just downgrade back to 2003 se and everything will work. You should realise that the blue angel wasn't made for WM5. That it works with WM5 is great...but as long as there is no official release u shouldn't complain..... It's just the way it is...
Click to expand...
Click to collapse
1- I'm complaining because this problem was already happening on 2003se (please, read above).
2- After so many problems with bluetooth, AD2P, etc, don't you think we deserve more attention from the ones that sold this devices to us?
3- If I stay on WM5 is because I realize the BA performs just ok on this OS. I'm using it mainly for work purposes.
4- Complaining is also a way of start doing things later. Something has to come first... :!: I've complained to I-mate about this problem when I had the original 2003se. No answer to date. That's why I decide turn back here and do this wonderful upgrades to my device.
What I find is this forums (as all of them in the 'net) are quite hard to search and find answers. Somehow we should find the answers given and put them in a common place (the good answers!!) i.e. the Wiki!
Anyway, what I'm looking for is answers and share them...
etc-.
ad2p
My keyboard problems seems to have almost dissapeared after turning off the word correction option. It seems is a CPU intensive program or so... Inside Word, however, the problem sometimes arises...
---
Any ad2p with blueangel and wm5 yet, boys? I can't find anything but this:
http://buzzdev.net/index.php?option...=view&id=6376&catid=26&limit=15&limitstart=45
But it seems there's still problems...
no avail
I´m having again this problem. I´ve done what have been suggested about changing the registry values for adjusting the priority values... still having this problem.
I use the device for writing a lot and any help would be very handy.
Anyone, please?
Thanks!
problem is fixed in newer roms which pagepool size have been increased.
try the AKU3.5 ROMs
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
you obvious did not read all the recommenced sites! My guess is that you tried to run the upgrade file in pocket pc. You must connect your phone to the computer and establish activsync connection first. than you run the upgrade file on your computer
gonzo11 said:
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
Click to expand...
Click to collapse
Navy2010 is correct you are running the updates from your PPC this won't work. You must run the programs from a PC. I also suggest a little more reading.
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
Make sure you have CID unlocked the device.
Kirby
Thanks Gents but one more question for u?
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
Sounds like a hardware failure and could be the reason the phone was sold... ?? If you can return it under some warrantee, I'd lean that direction.
--M
I agree.
Yep I agree. I have sent an email to the seller. In all fairness He sold me a brand new device and he has been pretty good so far. Let see what he says now. I'll update the post when he gets back to me. Thanks for you comments.
Seller has sent me an RMA form
I guess he is going to repair it or replace it.
He emailed me an RMA form which I have sent back. Saga continues.
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
I have had this problem but in reverse it turned out to be muck under the screen and would cause the start button to activate by just pushing the side of the case.
Get a laminated buisness card or something like it and slide it in between the screen and case
You may have something here
Thanks Eddieitman. I tried it and nothing much came out, but usually after a few mins the screen locks up. This time it's still responsive after 15mins. We'll wait and see after an hour if it still works. fingers are cross.
btw nice site.
Still locking up but a little squeeze works. lol
I am talking about the device. lol Unfortunately, it's still locking up. But when I squeeze the sides of screen it comes back. Sounds like my situation maybe a little worse than yours. I going to send it back and see what they do. thks for the help.
Screen issue not covered by warrantee.
This is a Update/FYI.
I sent my phone into Arvato Teleservice out of Germany to fix the screen issue. $97.00 cdn to do so. First off their customer service is absolutely horrendous. So avoid them.
They determined the issue to be a damaged Main Board, but because of the flashed ROM they are not going to do it under warrantee. I should of downgraded before sending it in (my fault). I am still fighting with them.
Cost to fix $490.00repair + $97.00shipping = buy a new phone.
I am not suggesting it is a result of the ROM but wondering has anyone experienced screen issues after flashing the ROM?
Hi guys,
I have a problem with my o2 xda stellar where I can be typing a message on the hardware keyboard but even though I'm hitting all of the keys correctly its still missing the odd letter - it seems as if its simply not picking it up. I've disabled the word suggestion feature and this has helped a little but the problem still remains. Its driving me bonkers!
Any help would be much appreciated.
Yes, it's one of the things that made me regret buying this f****** phone in the first place.
Read this, might help you to a certain extent.
http://forum.xda-developers.com/showthread.php?t=347457&highlight=double+letter
As soon as I installed the HTC keypad + keyboard cab it started happening so I removed it.
JDSX said:
As soon as I installed the HTC keypad + keyboard cab it started happening so I removed it.
Click to expand...
Click to collapse
I've never installed that although it does look like and interesting concept.
I found disabling word suggest worked to improve the recognition rate. Still have to be careful with the first word I type, but otherwise it is ok. Might give it a try with autocorrect off (but I like it auto-adding the ' in nt).
The same thing happened on my Hermes and my Wizard (both of which I turned suggest off on), so I wasn't surprised that the Kaiser did it (although it was almost tolerable with autocorrect on, which the Wizard really really wasn't).
I've tried the suggestions in this thread and the other linked thread but with no success. My hermes used to do this, but when I upgraded to the WM6 beta it seemed to fix the problem on that device. I've not tried the 6.1 roms - can anyone comment on whether the problem is still evident on those? (I'm guessing it will be).
Seraphic said:
I've tried the suggestions in this thread and the other linked thread but with no success. My hermes used to do this, but when I upgraded to the WM6 beta it seemed to fix the problem on that device. I've not tried the 6.1 roms - can anyone comment on whether the problem is still evident on those? (I'm guessing it will be).
Click to expand...
Click to collapse
I think its still there, the problem that I was having was if I were to type "this is a test" I exprienced delays with my spacebar...it would spell out
"thisi sa t est". and it would do it EVERY single time. I later found out that it was directly tied into HTC Keyboard and Keypad b/c once I removed this, it wouldnt do it anymore. (Looks like TouchPal for me). However, on Dutty's Beta 1 I didn't experience this problem, but other WM6.1 roms I did. Of course with Dutty's I had to jump through hoops to get the keyboard and Touch Keypad to work cooperatively and maybe this "fixed" it...who knows. BTW I have the Tilt version of the Kaiser.
I bought an ATT tilt quite a while ago. It is out of warranty now, and wouldn't you know it, something went wrong.
I'm currently using Dutty's Diamond ROM (with the keyboard fix installed), but the same happened before with the official ROM. While I text some keys don't work. I'll be typing away, just to look at the screen and see that I am missing a bunch of letters, rendering the message unreadable. I then have to go back and fill in all the blanks, and even then sometimes it takes several tries to get it to go. The same happens with the backspace key; sometimes it just doesn't work, other times it does (oddly enough, when it doesn't work normally, it usually lets me hit "function" and use it as the delete key).
My other concern is that there is a ton of lag while typing. It takes a while for letters to show up. Is that normal (for the Tilt, at least. I'm still wishing I had bought a BlackBerry)?
Yeah, I had similar troubles. I just upgraded my SPL and hopefully will be testing it further testing.
what SPL are you running?
I'm not entirely sure, it was a while ago that I flashed the ROM. How do I find out what it is? I tried Device Information, but it wasn't there.
you have to put it in Bootloader mode.
hold power and camera button while resetting with the stylus, then you'll come to the tricolor screen which will give you the SPL info.
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
crushbup said:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Click to expand...
Click to collapse
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
mech_supernova said:
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
Click to expand...
Click to collapse
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
crushbup said:
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
Click to expand...
Click to collapse
cnn.cn has them for cheap AFAIK!
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
whistler4ever said:
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
Click to expand...
Click to collapse
I got the same SPL he has, I did a hard reset afterwards then downgraded back to 1.0 because I saw no improvement.
I thought RomeOS worked best with 3.29.
crushbup said:
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
Click to expand...
Click to collapse
http://www.gsm4world.us/shop/tytn-p4550-keyboard-flex-p-1433.html
found this in another thread!
Success! If the SPL doesn't work and I can't convince AT&T to do it, I'll order one and put it in. How do you install it?
EDIT: I just installed skyfire, and noticed that while I was putting in my email and password it was smooth and nothing was skipped. I'm almost 100% certain this is a problem with WinMo itself
I have been having the same problem as you are describing, but I have noticed that it is with heavy use keys like T, H, E, R, S and for some reason V.
I was getting the feeling that it was a hardware problem rather than a software problem because, especially with the V, I have to apply a bit of pressure to get the button to work.
Unfortunately for me I bought mine off Ebay so the warranty is already void.
Incidentally mine started happening when I had the original network providers (T-Mobile) rom on it. I have since installed an original HTC rom and it hasnt made the slightest bit of difference.
So, how easy is it to open up the back of the Tytn II and replace the keyboard unit then?
Oh my god! Thank you for posting this. I swear I have always felt like posting this but always got too lazy. I thought it was only me that had this problem. It is so annoying typing away, and then having to spend another minute to retype the letters that didn't get inputed the first time. It is so frustrating and I thought it was my fault or something, or ROM, I believe its hardware related, but I am not going to spend another dime on this POS. I'm just not so patiently awaiting t-mobile to release their android device, and I will jump ship and never look back! Thanks for the post again, it has given me piece of mind.....ironically
I'm kind of wanting T-Mobile's Android phone, but seeing as how it's made by HTC, I'll wait for the first couple of user-reviews to come out. I bought the Tilt based on website reviews, but man, I was really misled. They said the camera was great, I can only get blurry unrecognizable images. They made no mention of the fact that when you switch to landscape it takes 3 seconds for all the graphics to appear.
I'm disappointed, and I think my next phone will be a plain vanilla flip phone.
Anywho, I'm updating the SPL now, I'll post if it makes any change.
Okay, I now have HardSPL 3.56 and there does not appear to be much of a change. There was some short lag at the beginning of the text string, but afterwards it caught up. I missed no letters this time. I cannot say how much of this was the placebo effect (i.e. it just felt faster), but perhaps if everyone with the issue tries we can have a reasonable answer.
ETA: I added a poll, so if you try this, fill in the poll!
disable word suggestion under Input setting.
i don't miss any characters with it disabled.
It was already disabled for me. I know I didn't change it, I think the ROM came that way.
Ok peeps im confused. I have flashed many many of my phones on my own. (touch pro, omnia, mogul, touch pro2)
I just replaced my touch pro2 due to a cracked screen and just recieved the new phone today. If im correct, i believe i have to hard-spl unlock it right ?
So if my memory serves me correctly, i synced it with windows mobile device and the hard spl unlocker.. i used the "automatic flash" but when it gets the final step it says that hard spl has detected that i have already unlocked another device and if i wish to unlock it commercially, then i need to email olipro or chan. " (thats been sumarized)
it also gave me the option of installing a cab (enablerapinew) and rerun the automatic flash from hard spl.
I have even tried the manual flash from the program, it goes into bootloader mode(which still shows "usb" at the bottom) then goes into the loading screen but stays at 0%. i wait for about 3 minutes while its in this state but nothing happens.
So what the fugg am i doing wrong... all i want to do is flash me a new rom and new radio rom and thats it.
Please some take me by the hand on this one.
PPC Insanity said:
Ok peeps im confused. I have flashed many many of my phones on my own. (touch pro, omnia, mogul, touch pro2)
I just replaced my touch pro2 due to a cracked screen and just recieved the new phone today. If im correct, i believe i have to hard-spl unlock it right ?
So if my memory serves me correctly, i synced it with windows mobile device and the hard spl unlocker.. i used the "automatic flash" but when it gets the final step it says that hard spl has detected that i have already unlocked another device and if i wish to unlock it commercially, then i need to email olipro or chan. " (thats been sumarized)
it also gave me the option of installing a cab (enablerapinew) and rerun the automatic flash from hard spl.
I have even tried the manual flash from the program, it goes into bootloader mode(which still shows "usb" at the bottom) then goes into the loading screen but stays at 0%. i wait for about 3 minutes while its in this state but nothing happens.
So what the fugg am i doing wrong... all i want to do is flash me a new rom and new radio rom and thats it.
Please some take me by the hand on this one.
Click to expand...
Click to collapse
ure going to either donate to olipro or email which is highly doubt you would receive an email and unlock from them right away.....
ure best bet is to donate, and itll only take like $5 pretty much, and u received it right away
PPC Insanity said:
Ok peeps im confused. I have flashed many many of my phones on my own. (touch pro, omnia, mogul, touch pro2)
I just replaced my touch pro2 due to a cracked screen and just recieved the new phone today. If im correct, i believe i have to hard-spl unlock it right ?
So if my memory serves me correctly, i synced it with windows mobile device and the hard spl unlocker.. i used the "automatic flash" but when it gets the final step it says that hard spl has detected that i have already unlocked another device and if i wish to unlock it commercially, then i need to email olipro or chan. " (thats been sumarized)
it also gave me the option of installing a cab (enablerapinew) and rerun the automatic flash from hard spl.
I have even tried the manual flash from the program, it goes into bootloader mode(which still shows "usb" at the bottom) then goes into the loading screen but stays at 0%. i wait for about 3 minutes while its in this state but nothing happens.
So what the fugg am i doing wrong... all i want to do is flash me a new rom and new radio rom and thats it.
Please some take me by the hand on this one.
Click to expand...
Click to collapse
XERO_Racer said:
ure going to either donate to olipro or email which is highly doubt you would receive an email and unlock from them right away.....
ure best bet is to donate, and itll only take like $5 pretty much, and u received it right away
Click to expand...
Click to collapse
Or go here and open a support ticket and explain your situation and wait for an answer...http://support.htc-unlocks.com/
hard spl
Dude you gotta buy it now. The hard spl has deected that you have used it once. You can buy the unlimited for like $5. still worth it.
There are people on here that reported that once they payed that it still didn't work what if that happens then what?
htanks... i did the donations and WAA LAA!!! things are back to normal again.
thank you for the information guys
Nevermind i also donated & it worked right away thanks for the help & info
Doo Doo said:
Nevermind i also donated & it worked right away thanks for the help & info
Click to expand...
Click to collapse
It is actually no longer a donation, but a requirement. They need to change the wording.
Xebec said:
It is actually no longer a donation, but a requirement. They need to change the wording.
Click to expand...
Click to collapse
Not true, you can always ask for a free ticket. The only thing is that it will take some time and people don't like to wait.
Lennyz1988 said:
Not true, you can always ask for a free ticket. The only thing is that it will take some time and people don't like to wait.
Click to expand...
Click to collapse
I submitted my ticket over two months ago and have yet to receive a response. It is safe to say they do not respond to free requests anymore.
Xebec said:
I submitted my ticket over two months ago and have yet to receive a response. It is safe to say they do not respond to free requests anymore.
Click to expand...
Click to collapse
I wonder if they are responding to free requests from people who haven't given them a hard time though ?
steviewevie said:
I wonder if they are responding to free requests from people who haven't given them a hard time though ?
Click to expand...
Click to collapse
I don't think asking for a response or asking to change the wording from "donation" to "required" is giving them a hard time. Two months is more than ample time to respond. I went ahead and paid my required fee though. I'm just irked that they still use the word donation.
Question answered, this discussion is also ongoing in the Hard SPL thread.
Thread Closed - not related to ROM development.
Thanks