I bought an ATT tilt quite a while ago. It is out of warranty now, and wouldn't you know it, something went wrong.
I'm currently using Dutty's Diamond ROM (with the keyboard fix installed), but the same happened before with the official ROM. While I text some keys don't work. I'll be typing away, just to look at the screen and see that I am missing a bunch of letters, rendering the message unreadable. I then have to go back and fill in all the blanks, and even then sometimes it takes several tries to get it to go. The same happens with the backspace key; sometimes it just doesn't work, other times it does (oddly enough, when it doesn't work normally, it usually lets me hit "function" and use it as the delete key).
My other concern is that there is a ton of lag while typing. It takes a while for letters to show up. Is that normal (for the Tilt, at least. I'm still wishing I had bought a BlackBerry)?
Yeah, I had similar troubles. I just upgraded my SPL and hopefully will be testing it further testing.
what SPL are you running?
I'm not entirely sure, it was a while ago that I flashed the ROM. How do I find out what it is? I tried Device Information, but it wasn't there.
you have to put it in Bootloader mode.
hold power and camera button while resetting with the stylus, then you'll come to the tricolor screen which will give you the SPL info.
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
crushbup said:
KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
Click to expand...
Click to collapse
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
mech_supernova said:
I am having the same exact problem, 1 out of 5 times it works corectly so im thinking it has to be somekind of software, my problem started when I started using ROMeOS's rom's and I have tried different SPL's virsions.
Click to expand...
Click to collapse
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
crushbup said:
I've heard that the keyboard/membrane may be the problem. Is that likely? If so, is there anywhere to buy them?
Click to expand...
Click to collapse
cnn.cn has them for cheap AFAIK!
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
whistler4ever said:
You can use this to update your SPL, I just went from 1.0 to 3.29.
http://forum.xda-developers.com/showthread.php?t=396922
What SPL are you currently on? did you reinstall the ROM after updating ur SPL?
Click to expand...
Click to collapse
I got the same SPL he has, I did a hard reset afterwards then downgraded back to 1.0 because I saw no improvement.
I thought RomeOS worked best with 3.29.
crushbup said:
Thanks!
But they only have the outer keypad (the one right below the screen). Well, I hope this can be fixed with software, because the only place I saw that listed them showed them at $39.99 and they were out of stock.
Click to expand...
Click to collapse
http://www.gsm4world.us/shop/tytn-p4550-keyboard-flex-p-1433.html
found this in another thread!
Success! If the SPL doesn't work and I can't convince AT&T to do it, I'll order one and put it in. How do you install it?
EDIT: I just installed skyfire, and noticed that while I was putting in my email and password it was smooth and nothing was skipped. I'm almost 100% certain this is a problem with WinMo itself
I have been having the same problem as you are describing, but I have noticed that it is with heavy use keys like T, H, E, R, S and for some reason V.
I was getting the feeling that it was a hardware problem rather than a software problem because, especially with the V, I have to apply a bit of pressure to get the button to work.
Unfortunately for me I bought mine off Ebay so the warranty is already void.
Incidentally mine started happening when I had the original network providers (T-Mobile) rom on it. I have since installed an original HTC rom and it hasnt made the slightest bit of difference.
So, how easy is it to open up the back of the Tytn II and replace the keyboard unit then?
Oh my god! Thank you for posting this. I swear I have always felt like posting this but always got too lazy. I thought it was only me that had this problem. It is so annoying typing away, and then having to spend another minute to retype the letters that didn't get inputed the first time. It is so frustrating and I thought it was my fault or something, or ROM, I believe its hardware related, but I am not going to spend another dime on this POS. I'm just not so patiently awaiting t-mobile to release their android device, and I will jump ship and never look back! Thanks for the post again, it has given me piece of mind.....ironically
I'm kind of wanting T-Mobile's Android phone, but seeing as how it's made by HTC, I'll wait for the first couple of user-reviews to come out. I bought the Tilt based on website reviews, but man, I was really misled. They said the camera was great, I can only get blurry unrecognizable images. They made no mention of the fact that when you switch to landscape it takes 3 seconds for all the graphics to appear.
I'm disappointed, and I think my next phone will be a plain vanilla flip phone.
Anywho, I'm updating the SPL now, I'll post if it makes any change.
Okay, I now have HardSPL 3.56 and there does not appear to be much of a change. There was some short lag at the beginning of the text string, but afterwards it caught up. I missed no letters this time. I cannot say how much of this was the placebo effect (i.e. it just felt faster), but perhaps if everyone with the issue tries we can have a reasonable answer.
ETA: I added a poll, so if you try this, fill in the poll!
disable word suggestion under Input setting.
i don't miss any characters with it disabled.
It was already disabled for me. I know I didn't change it, I think the ROM came that way.
Related
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
you obvious did not read all the recommenced sites! My guess is that you tried to run the upgrade file in pocket pc. You must connect your phone to the computer and establish activsync connection first. than you run the upgrade file on your computer
gonzo11 said:
I am a Newbie so be patient with me and your advice is appreciated.
I have a Qtek 9100 (Wiza200) G3
Rom 1.1.7.5
Radio 4.0.13.16
Ext rom 1.1.7.105
I purchased the phone unlocked and have used it with sim's from other countries. When I attempt to run the following updates.
RUU_Molski.Biz_226102_22610105_022511_WWE-30MB
RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2
I get the error "file name is not a valid Pocket PC application".
What am I doing wrong?
(I have also read all the recommended threats which were great. Thanks for sharing)
Click to expand...
Click to collapse
Navy2010 is correct you are running the updates from your PPC this won't work. You must run the programs from a PC. I also suggest a little more reading.
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292
Make sure you have CID unlocked the device.
Kirby
Thanks Gents but one more question for u?
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
Sounds like a hardware failure and could be the reason the phone was sold... ?? If you can return it under some warrantee, I'd lean that direction.
--M
I agree.
Yep I agree. I have sent an email to the seller. In all fairness He sold me a brand new device and he has been pretty good so far. Let see what he says now. I'll update the post when he gets back to me. Thanks for you comments.
Seller has sent me an RMA form
I guess he is going to repair it or replace it.
He emailed me an RMA form which I have sent back. Saga continues.
gonzo11 said:
The upgrade went perfectly. Thanks
The reason I was trying to upgrade the ROM is not resolved still.
When device is in the Portrait position (slide is closed) my touch screen works maybe 20% of the time. When I open the slide the touch screen works perfectly. The issue still occurs after the upgrade.
Any recommendations?
Click to expand...
Click to collapse
I have had this problem but in reverse it turned out to be muck under the screen and would cause the start button to activate by just pushing the side of the case.
Get a laminated buisness card or something like it and slide it in between the screen and case
You may have something here
Thanks Eddieitman. I tried it and nothing much came out, but usually after a few mins the screen locks up. This time it's still responsive after 15mins. We'll wait and see after an hour if it still works. fingers are cross.
btw nice site.
Still locking up but a little squeeze works. lol
I am talking about the device. lol Unfortunately, it's still locking up. But when I squeeze the sides of screen it comes back. Sounds like my situation maybe a little worse than yours. I going to send it back and see what they do. thks for the help.
Screen issue not covered by warrantee.
This is a Update/FYI.
I sent my phone into Arvato Teleservice out of Germany to fix the screen issue. $97.00 cdn to do so. First off their customer service is absolutely horrendous. So avoid them.
They determined the issue to be a damaged Main Board, but because of the flashed ROM they are not going to do it under warrantee. I should of downgraded before sending it in (my fault). I am still fighting with them.
Cost to fix $490.00repair + $97.00shipping = buy a new phone.
I am not suggesting it is a result of the ROM but wondering has anyone experienced screen issues after flashing the ROM?
Hello all,
I'm just now debating on whether or not I need to exchange my new Tilt in for another one, or if this is just normal break-in behavior.
The scroll wheel is very erratic, sometimes when scrolling down it will go up instead and reversing the scrolling motion will cause it to freak out (go down once then scroll up like crazy). Also pressing the scroll wheel in to select/click on something often doesn't work forcing me to try several times to "click" on what I have selected.
The scrolling action is nowhere near as smooth as my Hermes, is anyone else having these issues?
******* separate but related issue *******
If it is indeed a hardware issue, does anyone know of a way to restore the bootloader back to AT&T's ... I flashed HardSPL and think I should probably put it back to stock.
Thanks,
Dave
same problem
i am having the same issue, wondering if i should go back to that nasty blue slut of a rom
FEATURES
SuperCID / Security Level=0
Does not check NBH signatures
Based on 1.50 MFG bootloader, rtask enabled
Accept any password
Model ID check only 4 chars
SPL overwrite DISABLED (to bypass, use SSPL-KAIS.exe)
I guess using the SSPL-KAIS.EXE and then flashing an AT&T om would solve that.
Cheers,
Cactus
reitjam said:
i am having the same issue, wondering if i should go back to that nasty blue slut of a rom
Click to expand...
Click to collapse
I was having the same problem with the AT&T ROM, but admittedly was not running it for very long before pof released HardSPL.
That's what makes me think it's hardware related.
le_cactus said:
FEATURES
SuperCID / Security Level=0
Does not check NBH signatures
Based on 1.50 MFG bootloader, rtask enabled
Accept any password
Model ID check only 4 chars
SPL overwrite DISABLED (to bypass, use SSPL-KAIS.exe)
I guess using the SSPL-KAIS.EXE and then flashing an AT&T om would solve that.
Cheers,
Cactus
Click to expand...
Click to collapse
Thanks Cactus,
I haven't checked the SSPL thread today, I saw that pof closed it last night because it was bricking a lot of phones. Thought he mentioned that he was going to try to get a working one out soon.
Thanks again for the reply.
sirsycho said:
******* separate but related issue *******
If it is indeed a hardware issue, does anyone know of a way to restore the bootloader back to AT&T's ... I flashed HardSPL and think I should probably put it back to stock.
Click to expand...
Click to collapse
SSPL v1 is just fine to flash an SPL or a splash screen, it will not work if you flash a full NBH containing OS becuase the NBH buffer is smaller on 0.92.
thanks pof!
Erratic scroll wheel persists across ROMs
Well I flashed back to AT&T ROM this morning and have been playing with it all day, and the erratic behavior is still there.
Given that only one other person complained here, I think it might be my device. Gonna go see my AT&T guy about an exchange.
Thanks for bearing with me.
sirsycho,
Let me know if you got a new device and it is better, please. I am having issues with having to click the scroll wheel really hard to get it to register at times. On another note, unlike all the other keys on my Tilt keyboard, the 's' key barely goes down when you press it and it doesn't click like all the otthers. This causes me to instinctively hit it multiple timessss so I get a lot of Ss in a row. Anyone else?
I have the same problem. It sometimes works and sometimes it dont.
willieb9000 said:
sirsycho,
Let me know if you got a new device and it is better, please. I am having issues with having to click the scroll wheel really hard to get it to register at times. On another note, unlike all the other keys on my Tilt keyboard, the 's' key barely goes down when you press it and it doesn't click like all the otthers. This causes me to instinctively hit it multiple timessss so I get a lot of Ss in a row. Anyone else?
Click to expand...
Click to collapse
My new device is on the FedEx truck for delivery today... I'm going to try it out with the standard AT&T ROM for a bit to get a good baseline and then flash to HTC's... I'll try to post an update tonight.
Thanks.
sirsycho said:
Well I flashed back to AT&T ROM this morning and have been playing with it all day, and the erratic behavior is still there.
Given that only one other person complained here, I think it might be my device. Gonna go see my AT&T guy about an exchange.
Thanks for bearing with me.
Click to expand...
Click to collapse
Not you're device. I had this issue prior to unlocking, then with the htc rom and again now with the att rom. To me, it looks either hardware issue, or something lower level is the OS that is common to all current roms. PErhaps the sensitivity of the wheel needs tweaking somehow.
I had issues with my scroll wheel as well. Coming from an 8525 I was like WTF did they do to this wheel? Sometimes the click wasn't registering, but either it's broken in, or I've adjusted my habits because it seems OK now, though not as solid feeling as the 8525 was. I'm sitting here with both the 8525 and Tilt in my hands and the wheel on the 8525 is definitely better.
I'm experiencing the same problem. The wheel feels scratchy when rotated, unlike my Hermes which was smooth. Usually wheels of this type are metal contacts against a circuit board, which use a binary gray code to register direction. I'm thinking its been designed poorly. Perhaps the Hermes unit was $.02 more money.
I wonder if we can replace it with a Hermes unit?
thanks sirsycho.. Update us once you get your new one.
Update with new Tilt and ATT ROM
ok... I'm still running the ATT ROM and still having the scroll wheel issues. Exactly the same things mentioned by others here... scrolling doesn't always register and when pressing in on the wheel I have to do it a couple times before it actually works.
On a side note, it seemed to be getting better on the older device before I switched, but as was mentioned above, that might just be me getting used to the substandard hardware (both of my Hermes work sooo much better).
I'll probably try this out through tomorrow before I flash the HTC ROM... I'll post again if anything improves.
Same scroll wheel problems for me (I have a Tilt). It sounds like maybe it improves as you break it in, so I'll give it a few more days before returning. Grrr....
Same problem here with my first Tilt. I returned the next day because this thread hadn't popped up yet so I thought it was just me and one defective unit. I subsequently got one that (knock on wood) has performed much better. Still notice a few jutters here and there, but the wheel doesn't feel as "scratchy" as mentioned before.
When I had my first Tilt, I noticed it much more when moving the wheel slowly. Here's hoping the problem doesn't start again because so far so good with my new one.
hello i'm using htc Tytn II
rom version : 1.81.707.0 WWE
rom date : 09/05/07
Radio version : 1.27.12.11
Protocol version : 22.45.88.07H
CE OS 5.2.1620 (Build 1825.0.4.2)
and everything works fine up,down and push.....
cheers
Just got a Tilt 3 days ago
Just got a Tilt 3 days ago and Im having the same erratic scroll wheel problem.
I see that this is an old thread, so I'm wondering if any conclusion as to this being a hardware or software problem have been made?
Thanks
Hi all... just curious if anyone has had this problem or has any advice for me:
Today out of nowhere my TyTN II starts acting really funky. When I push the "power" button on the right hand side, it lights up the phone, pulls up the phone application and some letters begin appearing one-at-a-time where the currently dialing number usually shows up (E, D, F, and then C if it makes any difference). It will also light up and do this intermittently when the phone is not being used. The notes recorder app also came up and began recording until I unmapped that application from the 6th button in the settings. In addition, all of the slide out keyboard buttons and the soft-keys themselves (save for the middle button) are completely non-responsive. Using the stylus on-screen works fine. So far a soft reset and a hard reset (always wonderful away from home) hasn't alleviated the issue.
I've contacted HTC support, and they gave me the warranty repair number (of course this crap always happens on a weekend). It sure sounds like a hardware failure to me, but I just thought I'd throw it out to the geeks on here...
I'll buy it for 100 dollars. email me: [email protected]
or you could try doing a master reset on the phone or flashing it with a rom..
hopefully you have hard spl on your phone
huh? huh? and huh?
Oh and if anyone out there who isn't inclined to be a jerk, could you give me some insight into what to expect from HTC service and repair? Do you agree that this is a hardware issue and most likely not a corrupted ROM?
Its not master reset its hard reset. What he is saying is to reset everything and it should work. Look at the Wiki for help. We aren't gonna spoon feed you answers that are searchable, but if they aren't specifically answered in some source then we will help which is 50% of the time.
~~Tito~~
did any of you guys even read his post?
castlecraver said:
So far a soft reset and a hard reset (always wonderful away from home) hasn't alleviated the issue.
Click to expand...
Click to collapse
XtreMe_G said:
did any of you guys even read his post?
Click to expand...
Click to collapse
I said to do it again then read the wiki if it doesn't work. 2nd time should be the charm.
If not use a different rom .
This happened to my up button I forgot to mention, it was the radio for me that was the problem so try a different radio also.
Did you find the answer?
Hello Mate,
I've got the very same issue, thought it may have been a virus at first, but after loading up a new rom the problem still exists, I'm reckoning the phone is less than useless now
i had this type of problem for quite some amount of time & that too randomly. then i found that a key lock feature in pocketmusic was interfering and causing it. similarly, i feel any other apps that may use/ be used to remap keys may cause this issue.
ofc, since u have done a hard reset, this may not really apply to u. but then which rom & radio are u using anyways?
Hey... just an update. I sent the device back to HTC in Houston with an RMA. Communication with the repair center was fairly poor. I had no idea the phone was on it's way back to me until it showed up at my door today. No information in the box, but I wasn't charged for any repair and everything works as normal at this time. The device went through the "first time" setup when powered on. Still no idea what caused the problem or what exactly they did. R:...12.32, D:1.56.0 (same as before I'm pretty sure).
axeman: Never had pocketmusic on this (AFAIK), but if it was due to some other software re-mapping the keys, wouldn't it sort itself out with a hard reset? I could be wrong. This seems more like a hardware failure to me.
devil's advocate: Try contacting the HTC repair center in your country. They gave me an RMA without any trouble and their turnaround was quick (although I would have appreciated some notification that it was fixed and back on it's way). I got my TyTN II within a few weeks of it coming out, so I'd assume yours is under warranty still as well. I wouldn't chalk it up as worthless quite yet, even (dare I say) still worth more than $100. (Suck my balls, gqstatus0685 )
I've searched and could not find an answer. So I'll just start a new thread.
No matter what radio I use, no matter what ROM I flash, I cannot get my screen to respond to taps.
It was responding to manual buttons but no touch. I flashed to a new ROM hoping that would fix it, but now I can't even past the calibration screen...
This all just happened suddenly too. I have been using an iphone for the past couple of months so I have not been too concerned. However I wanted to use my kaisar as a modem at an offsite sales event but it's still the same....
Probly been asked a few times, but I took the plunge away....
Flame or answer away....
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
hang.tuah said:
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
Click to expand...
Click to collapse
That may work. But I'd rather not downgrade to 6.0 if that is not the problem. Plus I have no valid warranty. ATT Tilt is from the United States and I live in Canada...
ccaparli said:
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
Click to expand...
Click to collapse
I have tried 2-3 Hard SPL's.
I suspect that it has something to do with the Hyperdragon 3 Diamond ROM. All my problems started when I flashed that paticular ROM.
I will try downgrading to 6.0 and see if that does the trick. I somehow doubt it though. I think that this may need another, trickier remedy, ie: unbricking a bricked PPC.
I was sort hoping that this was a more common problem and advice would be more readily available...
So I downgraded to the original ROM, but still the same problem. Perhaps if I also downgrade the SPL. Does anyone have this file?
Btw, though I am not a developer or anything I have been flashing ROM's for awhile.
This problem just came out of nowhere...
bump...............
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
KMFM$ said:
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
Click to expand...
Click to collapse
Ya, I forgot about that thread. I haven't used that since I upgraded my spl to Hard3.28. I can understand why I would get problems with the RESTORED STOCK ROM that I flashed my device wouldn't work with the latest Hard SPL, but why would this occur with a ROM it was supposed to work with.
This wasn't something that happened after I flashed, it just happened out of nowhere... They key to fixing this understanding WHY. it may or may not be the SPL...
last bump...
jzalapski said:
last bump...
Click to expand...
Click to collapse
After you flash a rom or hard reset, are you able to get past the screen calibration?
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
liquidfork said:
After you flash a rom or hard reset, are you able to get past the screen calibration?
Click to expand...
Click to collapse
No. I figured the problem had something to do with the SW, so I just flashed figuring that would fix it, but now it's basically useless (not like I'm using it right now anyway, but)...
timurg said:
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
Click to expand...
Click to collapse
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
jzalapski said:
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
Click to expand...
Click to collapse
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
timurg said:
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
Click to expand...
Click to collapse
step 1: Create File on SD Card
step 2: ...
step 3: Profit
I had a similar problem on my trinity. It was an hardware problem, a spoiled thin strip that is between the LCD and front cover. As someone told me that
send it to warranty would take a long time to get it back I replaced myself the strip and now is working...
It's probably a hardware issue. You will have to replace your LCD+Touchscreen and if that doesn't work, you'll have to replace the flex that connects the LCD with the motherboard itself.
I fixed a TILT with that problem. I ended up buyina a new LCD when the problem was caused by the flex
PS, LCD screen is way cheaper than the flex.
Hey. So it looks like I did buy a replacement warranty. So I took it to my guy and he said that he would just replace it. He asked if I wanted the same one or if I wanted to pay the difference and get a new one....
I paid an extra $250 and got a diamond...
Problem Solved.... See you in the Diamond Section...
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
maxxis said:
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
Click to expand...
Click to collapse
I had a similar problem with a Wizard and it turned out to be a bit of dirt that was stuck under the screen on one corner, resulting in constant contact that prevented the device from registering my taps. I removed the screen and cleaned it thoroughly to fix.
Also try "rubbing" the screen in each direction with both thumbs to see if you can slide the screen around and dislodge any dirt from the edges. The screen will move around slightly under the case without damaging the device.
Must admit I'm just about to part company with the TyTn. I've been impressed with it to a degree as a PDA but I do think the phone element of it is atrocious. What makes it worse now is that there seems to be problem after problem with it, especially after the 6.1 upgrade.
Latest problem is that today it just seems to slow down, lock or even freeze completely. Going to contacts and hitting a contact in the list doesn't open it up any more and problems just seem to start from there. Once this happens I can't close programmes, can't navigate in them, in fact can't do anything, at least until the damn thing seems to catch up with a key press I made 1/2 an hour ago. Restarts and battery removal seem to fix it for 1/2 an hour or so but then it's back to lag and lock. Sick and tired of it now.
It got turned off and on again while connected to PC by USB and not sure if that's caused it but overall I'm getting quite fed up with the device and the WM 6.1 combi.
Contemplating a hard reset or even re-flash (possibly back to WM6.0 but the problems with SPL reversion put me off that) to try to fix what has just become a bug ridden pain to use.
Did you install Hard SPL to upgrade to WM6.1, or are you using your Carriers ROM?
If so what version of Hard SPL are you currently using?
Ta
Dave
Dont forget that its not the phone´s fault but M$ and HTC. They build the crappy roms. I have cooked rom on my kaiser and I am more then satisfied with it.
Absolutely nothing wrong with mine and I've had it since Jan this year.
Whatever problem has occurred has been as a result of my installing some app that conflicts with something, but I have aways been able to rectify matters.
Runs like a well-oiled machine.
MACkjam said:
Absolutely nothing wrong with mine and I've had it since Jan this year.
Whatever problem has occurred has been as a result of my installing some app that conflicts with something, but I have aways been able to rectify matters.
Runs like a well-oiled machine.
Click to expand...
Click to collapse
Same here, though i have this device since may this year. I have to say that a flash with a custom rom improves the quality of the kaiser. Carrier roms are slow and full with programs i do not use.
My only remark is that the phone reacts slow on phonecalls. It takes a second or two before the phone rings when you are called. Besides that, the phone responses slow when i end a call. So the reaction time can be improved. Still: that's my only remark and i do not even know if that is a phone or os related problem.
MACkjam said:
Absolutely nothing wrong with mine and I've had it since Jan this year.
Whatever problem has occurred has been as a result of my installing some app that conflicts with something, but I have aways been able to rectify matters.
Runs like a well-oiled machine.
Click to expand...
Click to collapse
Ditto, I've had mine a year and it's a champ. Either your spl is wrong for 6.1 or your phone is sick and needs to go to the phone hospital.
Never had any problem with my Tytn II ....love it,, with me since April this year...
The Copilot GPS software which i got free with phone works like a dream.
Cheers.
No problems with my device and I am taking it to the limits daily.
If you need a solid fast reliable smartphone - you can sure find better then this.
but if you look for a device that can be configured to fit exactly your taste and needs with the best support ever (yes, I'm speaking about the XDA-Dev forum) keep this one.
this is the ultimate device for those who are seeking for constant improvment and willing to invest some of their time in it (flashing flashing flashing)
Well I'm glad for those that are having a better experience than mine. Mine is still pretty dismal though.
Like an idiot I just followed the instructions from HTC for installing their 6.1 and haven't touched SPL. It was all working fine (of sorts) yesterday (despite the fact that I wished I had not upgraded to 6.1) andf then it just keeps locking up. Using SMS and hitting to accept a word offered by predictive text guarantees a lock as does opening contacts and selecting a contact. Will look at the SPL issue but didn't really want to be tinkering with that as I wanted to keep it all stock from the warranty side. At the moment though I suspect even the warranty will not cover it when I hurl it against the wall from having to do the 25th reset of the day.
I suggest you do a hard reset; then install Hard SpL and go to WM 6.1. Once SpL is installed there will be very few, if any, problems with the device.
Cheers
MACkjam said:
Absolutely nothing wrong with mine and I've had it since Jan this year.
Whatever problem has occurred has been as a result of my installing some app that conflicts with something, but I have aways been able to rectify matters.
Runs like a well-oiled machine.
Click to expand...
Click to collapse
Same for me. I have had nothing but great luck with my 8925 with the stock ATT ROM.... And its a refurb!
Maybe you just have a bad phone. You don't judge the heard by one horse.
Empgamer said:
Well I'm glad for those that are having a better experience than mine. Mine is still pretty dismal though.
Like an idiot I just followed the instructions from HTC for installing their 6.1 and haven't touched SPL. It was all working fine (of sorts) yesterday (despite the fact that I wished I had not upgraded to 6.1) andf then it just keeps locking up. Using SMS and hitting to accept a word offered by predictive text guarantees a lock as does opening contacts and selecting a contact. Will look at the SPL issue but didn't really want to be tinkering with that as I wanted to keep it all stock from the warranty side. At the moment though I suspect even the warranty will not cover it when I hurl it against the wall from having to do the 25th reset of the day.
Click to expand...
Click to collapse
Thats weird mate, before even knowing that xda existed I flashed mine to 6.1 on the HTC site and it worked like a charm.
I have to say that I bought this phone well knowing that it was more of a ppc than a phone. I have to say that this phone has BLOWN ME AWAY with the capabilities shown through this forum. I suppose I shouldnt be surprised, being that it is practically a computer, all the mods are basically batch files and adjusting the registry or are skins. I absolutely love this machine!