Strange Slow Down Issue - MDA II, XDA II, 2060 Windows Mobile 6 Upgrading

hi
plz tell me if any one hv solution for this.
I hv m1000 wid Broken screen which i hv replaced today and updated my m1000 from WM5 to WM6. But the Start Menu takes 20-25 seconds to pop up. All other Menu like Tap and hold are also taking same time to popup. volume Bubble aslo hv same issue and there is no sound. Every thing else is working fine like file explorer, other programs , phone ETC.
I hv tried these
1. Switch back to old LCD .(No luck)
2. Switch back to different wm5 and wm6 rom. (same issue)
3. Switch back to wm3 Rom.(Every thing works well)
4. Too many Hard Reset.(no luck)
5. Battery Removal for long time.(no luck)
6. DOC re partitioning.(no luck)
GOT MY DEVICE FIXED
Thanks to all here for their support. I got my device fixed. Problem was in my New Lcd it has a faulty Belt which only works if some pressure is applied on it so i putted a rubber behind it and now it is working. But bad luck is that i hv given the Positive feedback for that LCD on ebay.

hi
Ye i had the same issue. Keep reflashing until a rom gets to a decent speed then reflash back to the rom you want.
Or it might be that the rom is not for himalaya?
Definately keep reflashing.
it worked with me
BTW: The rom in the signature picture is wrong i think.
My rom is WM 6.5 CE OS 5.2.23409.5.4.0 by zjw831
Screenshot below

flyboyovyick2k9 said:
hi
Ye i had the same issue. Keep reflashing until a rom gets to a decent speed then reflash back to the rom you want.
Or it might be that the rom is not for himalaya?
Definately keep reflashing.
it worked with me
BTW: The rom in the signature picture is wrong i think.
My rom is WM 6.5 CE OS 5.2.23409.5.4.0 by zjw831
Screenshot below
Click to expand...
Click to collapse
Thanks for ur reply.
I hv reflashed alot but the problem is still there But One of Ather's Rom is working little good. at that rom Start Menu is working But no Sound and Other POPUP Menus are still Very Slow.
And signatures are not wrong cause i hv 4 devices.

it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that

Ather said:
it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that
Click to expand...
Click to collapse
hi bro
i hv tried a Pdaviet Rom now all the things r working except Sound. if i play a mp3 file media player shows Error that "device attached to system is not functioning". And if the device is loose or tight it will also not worked wid WM3. it is working flawlessly wid WM3.

Ather said:
it could be a faulty RAM, or you screwed the device too hard or too lose, try to check that
Click to expand...
Click to collapse
Sounds like a faulty RAM to me, too. Or some other hardware issue. Worn battery?

muckelmaus said:
Sounds like a faulty RAM to me, too. Or some other hardware issue. Worn battery?
Click to expand...
Click to collapse
hi nd thnks for ur support.But how a faulty device works in WM3.and will a faulty Ram behave differently with diff. roms?

It´s because diffent parts of the memory are used. Look at aeroflylubys kitchen. He has got an equal issue with broken ram. He can´t flash/use WM6.5 anymore. On WM 6.1 everything works fine. Strange, but not impossible! Good Luck.
PS: As Senior I guess you know how to hard reset, as it differs from Wm2k3!

hey I hv just open my device nd chk for any physical damage. But nothing is there. And after re-assembling
1. Sound Works.
2. No slowdown at all.
3. Backlight Goes permanently off. (during boot also)
I hv tried the wm3 rom now it has sound but no backlight and no TOUCH in wm3.

krishan2207 said:
hey I hv just open my device nd chk for any physical damage. But nothing is there. And after re-assembling
1. Sound Works.
2. No slowdown at all.
3. Backlight Goes permanently off. (during boot also)
I hv tried the wm3 rom now it has sound but no backlight and no TOUCH in wm3.
Click to expand...
Click to collapse
It is a hardware issue, for sure!
Check the wires between TS and MB, but be carefull. One mistake and you will wreck your device!

yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide

Ather said:
yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide
Click to expand...
Click to collapse
thnx but I hv the pdf. and i hv dropped that idea to fix the m1000.

Ather said:
yep, its a hardware issue, try to re-assemble it
if you want, i can link you with a PDF Guide
Click to expand...
Click to collapse
Yes, please! Give us that link, as hardware problems are nor rare these days!

http://mikechannon.net/PDF Manuals/Himalaya Service Manual.pdf
Source :
http://www.mikechannon.net/page1.html

Related

Swapping Battery problem

I've seen this in the wiki page..
Q: Whenever I swap my battery, the clock will be reset and become inaccurate. I still haven't found a solution yet.
A: Hardware issue, not related to WM6.
Click to expand...
Click to collapse
If im going to send this to service center, will they just cost me a big $$$..??
Will they change the whole mother just for the battery??
because my warranty is expired.. and im afraid they cost me too high just for this battery issue..
Any experts idea?..
Hi,
I posted that question. Nevertheless it was due to WM6 ROm. I did not have that problem while using other ROM 2.26.
Is your problem happened after upgrading to WM6?
I didnt check..
because my wizard is a second hand..
after i bought it i rushly go home and upgrade to crossbow.. havent check it before..
but are you sure it is only because of the ROM wm6?
why other users using crossbow doesnt have this problem..
GreatWizard said:
why other users using crossbow doesnt have this problem..
Click to expand...
Click to collapse
don't they?
i have it!
So i guess we have a wrong information in the wikipage that says its hardware related not in WM6..
Any other users who have this problem in crossbow?
any phone will lose time info after removing the battery.. how do you think it will count time if there is no other battery inside =)
before i have o2 XDA II wich has a backup battery and everytime i remove the batery dates and clocks stay..
Wizard also have a backup battery..
thats why im wondering why the dates and clock reset everytime i remove my batery
indeed.. there is a little battery in wizard.. just found
http://www.thout.tweakdsl.nl/batt.jpg
GreatWizard said:
I didnt check..
because my wizard is a second hand..
after i bought it i rushly go home and upgrade to crossbow.. havent check it before..
but are you sure it is only because of the ROM wm6?
why other users using crossbow doesnt have this problem..
Click to expand...
Click to collapse
I am sure about that. I used to run T-Mobile 2.26 ROM and other customised ROM based on WM5 and did not have that problem. It happens only after upgrading to WM6.
i also have this issue...i just dont take the battery out anymore...
I have it also, using wm5 not crossbow

Can't Tap Screen

I've searched and could not find an answer. So I'll just start a new thread.
No matter what radio I use, no matter what ROM I flash, I cannot get my screen to respond to taps.
It was responding to manual buttons but no touch. I flashed to a new ROM hoping that would fix it, but now I can't even past the calibration screen...
This all just happened suddenly too. I have been using an iphone for the past couple of months so I have not been too concerned. However I wanted to use my kaisar as a modem at an offsite sales event but it's still the same....
Probly been asked a few times, but I took the plunge away....
Flame or answer away....
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
hang.tuah said:
Just flash ur shipped ROM & see if it can back to normal again. If not, just return for warranty or repair.
Click to expand...
Click to collapse
That may work. But I'd rather not downgrade to 6.0 if that is not the problem. Plus I have no valid warranty. ATT Tilt is from the United States and I live in Canada...
ccaparli said:
have you updated your HardSPL?
if you have spl1.0 with the wm6.1 installed, these problems are common.
Click to expand...
Click to collapse
I have tried 2-3 Hard SPL's.
I suspect that it has something to do with the Hyperdragon 3 Diamond ROM. All my problems started when I flashed that paticular ROM.
I will try downgrading to 6.0 and see if that does the trick. I somehow doubt it though. I think that this may need another, trickier remedy, ie: unbricking a bricked PPC.
I was sort hoping that this was a more common problem and advice would be more readily available...
So I downgraded to the original ROM, but still the same problem. Perhaps if I also downgrade the SPL. Does anyone have this file?
Btw, though I am not a developer or anything I have been flashing ROM's for awhile.
This problem just came out of nowhere...
bump...............
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
KMFM$ said:
This should help:
http://forum.xda-developers.com/showthread.php?t=334679
Also, make sure you run JumpSPL/SSPL-KAIS in order to successfully change the SPL.
Click to expand...
Click to collapse
Ya, I forgot about that thread. I haven't used that since I upgraded my spl to Hard3.28. I can understand why I would get problems with the RESTORED STOCK ROM that I flashed my device wouldn't work with the latest Hard SPL, but why would this occur with a ROM it was supposed to work with.
This wasn't something that happened after I flashed, it just happened out of nowhere... They key to fixing this understanding WHY. it may or may not be the SPL...
last bump...
jzalapski said:
last bump...
Click to expand...
Click to collapse
After you flash a rom or hard reset, are you able to get past the screen calibration?
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
liquidfork said:
After you flash a rom or hard reset, are you able to get past the screen calibration?
Click to expand...
Click to collapse
No. I figured the problem had something to do with the SW, so I just flashed figuring that would fix it, but now it's basically useless (not like I'm using it right now anyway, but)...
timurg said:
Look here It will not fix the problem, but at least it will let you to bypass the "aligment screen"
Click to expand...
Click to collapse
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
jzalapski said:
Thank you. I will try that when I have time later. I'm not sure what it is yet, but I'm sure it will work...
Click to expand...
Click to collapse
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
timurg said:
hehe, just create an empty file "welcome.not" in the root of SD card and ... PROFIT!
Click to expand...
Click to collapse
step 1: Create File on SD Card
step 2: ...
step 3: Profit
I had a similar problem on my trinity. It was an hardware problem, a spoiled thin strip that is between the LCD and front cover. As someone told me that
send it to warranty would take a long time to get it back I replaced myself the strip and now is working...
It's probably a hardware issue. You will have to replace your LCD+Touchscreen and if that doesn't work, you'll have to replace the flex that connects the LCD with the motherboard itself.
I fixed a TILT with that problem. I ended up buyina a new LCD when the problem was caused by the flex
PS, LCD screen is way cheaper than the flex.
Hey. So it looks like I did buy a replacement warranty. So I took it to my guy and he said that he would just replace it. He asked if I wanted the same one or if I wanted to pay the difference and get a new one....
I paid an extra $250 and got a diamond...
Problem Solved.... See you in the Diamond Section...
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
maxxis said:
had same problem - which i solved by dissasembling and putting few paper pieces under the screen to make a good fit of screen inside the housing - and it helped - touhscreen works fine
Click to expand...
Click to collapse
I had a similar problem with a Wizard and it turned out to be a bit of dirt that was stuck under the screen on one corner, resulting in constant contact that prevented the device from registering my taps. I removed the screen and cleaned it thoroughly to fix.
Also try "rubbing" the screen in each direction with both thumbs to see if you can slide the screen around and dislodge any dirt from the edges. The screen will move around slightly under the case without damaging the device.

W 6.5 Roms: Keyboard Problem

Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Is it laggy and slow in every program? For me it works very well. Only thing is my m-key is kinda broken, not a software issue i figure though.
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
That's how my m-key is broken, one in ten times it types two Ms on one press. But it isn't like that on any other character.
kanchigo said:
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
Click to expand...
Click to collapse
it's not located in a specific rom... every 6.5 rom create the problem.
@jablko yes, every program...
zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
exactly the same to me.
l0rdsheva said:
exactly the same to me.
Click to expand...
Click to collapse
same here, altough I had the same problem at my original WM 6.1
Same issue
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
I have experienced same issues like you did. The Fn key works only when I put lot of pressure on it (didn't succeed to determine which is the most suitable position) so, I've been forced to find other alternatives (soft keyboards). But, what's important is to find out if this is a hardware problem or is simply related to the new ROM installments which I play with...
Any opinion/suggestion is more then welcome...
Thanks
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
oh let me tell you something real that is happening.
1.keyboard is crap if u dont use the buttons daily ,you will have this problem(i have it too)
2. same as my camera button( i press half way to auto focus and then press it fully to take a picture. but now it auto focus and when i press fully,the camera will auto focus again and shoot the pictures )
i dunno what is wrong with X1 ,but htc has make a bull**** things for SE.(happy that SE decided to leave them).
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
l0rdsheva said:
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
Click to expand...
Click to collapse
Now that's hardcore!
Jablko said:
Now that's hardcore!
Click to expand...
Click to collapse
no problem, it's already out of warranty and if it goes wrong is time to buy another device!
crava said:
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
Click to expand...
Click to collapse
I reached to the same conclusion like you did. Seems like most of the SE X1 keyboards have problems, as well like the battery life (btw, last night, in stand-by mode, my X1 battery drained out completely without having any process/program running)...
Speaking about SE X1 in general, yes could be taken as a kind of failure but we don't have to forget is made by HTC. So, they could be blamed as well for this lack of success!
Or maybe there was also a sabotage around, who knows?
time to get X2

how to get keyboard working right

hey i just bought a x1 and it has a keyboard issue.. when i slide it open the screen doesn't rotate and it kinda freezes, whatever buttons i push doesn't do anything. once i slide it closed everything i pushed happens.. it originally had the pure upgrade wm6.5 rom on it when i bought it. i tried installing different roms - barebones,stock rom,826x and none has fixed the keyboard issue. what can i do?
Nothing I guess, except trying another rom; every device (other than xperia) has some problems with some roms. I heard Energy is the best you can get.
hey thanks for your response. ill try installing this energy rom and hope it can fix it
ur flexible cable wasted..go get it replaced at service centre.
Ho I'm sorry, I thought you said none other rom had this problem, misread...
Will this be a free repair from Sony or about how much should I be looking to spend $
if your under warranty then of course its free!
also make sure you flash a stock rom, then flash the stock-SPL back, otherwise they won't fix it.
in indonesia about US$50-$75
ok sounds good. i think i flashed it back to stock and stock spl is there a way to make sure?
go into the tri colour bootloader screen
and it shouldnt say OliNex anymore
and it should say 0.72.0000
and obviously the stock rom is easy enough to recognise
hebigakure said:
in indonesia about US$50-$75
Click to expand...
Click to collapse
hey just called itll be 180 for sony to fix it..
Jonny4911 said:
go into the tri colour bootloader screen
and it shouldnt say OliNex anymore
and it should say 0.72.0000
and obviously the stock rom is easy enough to recognise
Click to expand...
Click to collapse
how would i go about fixing this myself? if i open it up and change the keyboard membrane with this do you think this would fix the problem? http://cgi.ebay.com/SONY-ERICSSON-X...MEMBRANE-PCB-/120574544261?pt=PDA_Accessories
hello guys, i have problem with my keyboard too. but its something else.
when i am typing a sms, a lot of letters appear twice or more in screen or letter appear slowly. in any other application, like notes, or work, keyboard is fine. any ideas for it?
i am having the same problem, i have tried 3 different roms
none of them rotate properly.
its not the device because it was working fine with android and wm 6.1

[Q] Milestone touch screen problem???

Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance

Categories

Resources