Database Develop

Mda Vario upgrade Room. Big problem....

Hello to all. I have a great problem.
I want to install an Italian ROOM in my VARIO MDA (room version 2.21.2.0 ger). I have used Lokiwiz in order to unblock the CID but now when I install new ROOM appears error 300.
Perhaps there is an error when I release the CID. In fact in window DOS of Lokiwiz it appears “Error: ITwriteDisc - si è verificato un errore interno"
Please help me!!!! :?

lokiwix 0.2x does not work anymore with spl 2.x roms. i to have the same problem, but it is impossible to cid unlock spl 2.x phones (unless it is below 2.21). in your case, the only way to change the language is to follow the following post / guide (as did i). you can use lokiwiz 0.3a to simunlock you phone.
http://forum.xda-developers.com/viewtopic.php?t=56088

or go to http://www.imei-check.co.uk/

I cannot pass the splash screen!

Hi All,
Since 2 days I'm surfing on the forums and triying to find a solution for my non working Qtek 9100.
The bootloader can still work but when I try to install any Qtek rom (already tried every released ROM) my Qtek holds on the splash screen.
Thanks for all your care...
Rgdrs,

kakman said:
Hi All,
Since 2 days I'm surfing on the forums and triying to find a solution for my non working Qtek 9100.
The bootloader can still work but when I try to install any Qtek rom (already tried every released ROM) my Qtek holds on the splash screen.
Thanks for all your care...
Rgdrs,
Click to expand...
Click to collapse
If your phone has not been CID unlocked (you can cid unlock only if you have a 1.xx rom) then the only roms you can install are Qtek roms WITH A GREATER VERSION NUMBER AND IN THE SAME LANGUAGE OF THE ONE CURRENTLY INSTALLED.
This means that if you have a german qtek rom, say ver. 2.01, then you can only install a german qtek rom version 2.02 or greater. Other languages roms, even if from qtek, cannot be installed.
Of course there are ways to circumvent this limit but before i go on explaining, it would be useful if you could provide more information:
- rom version
- IPL/SPL version (softreset to know)
- CID locked??? (did you use lokiwiz or awizard???)
Bye

Help ROM CID unlock

Hi,
My boss has just bought a Wizard branded as a Grundig GR660 by Movistar, and he wants it in English, I've read all about the bootloader problem with 2.21.0001, it has Rom version 2.22.5.2ESN. If I try the downgrade i get a error 300 message.
Is there ANY way i can change the language to English????
Cheers!!!!

I have the same G4 device as well, there is no need for CID unlock to upgrade the phone to 2.xx rom (any languages) version. However, you might need to sim unlock the phone using Lokiwiz03a though. In order to upgrade the ROM, just follow this instrution: http://forum.xda-developers.com/viewtopic.php?t=56088
Alternatively, you could try my new cooked Rom Wizard_Love 2.26 (worldwide English version) which is for G4 device : ftp://xda:[email protected]/Uploads/Wizard/Roms/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar

Thankyou very much, worked a treat!!!!!!! 8) 8) 8)

Back to spl 1.07

Hi,
I used to have rom faman 4
radio 1.50
spl olipro 1.2
But I have a problem and I need to send back my S300 (French SFR P3600) so I want to restore it the way it was. I achieve to have the ROM and the Radio back to 1.23 and 1.29 but I'm stuck with the spl 9.99 cp.
I've been told that it's linked to the Faman's ROM.
Would anyone know how to step back to spl 1.07 (native S300 spl)?
I need help I've been working on that for days and my trinity is dead!

Please, no one has an idea.
It seems that I need a dump of my original spl which is 1.07. If somebody knows where to find it...
Thanks

aleetosimr said:
Please, no one has an idea.
It seems that I need a dump of my original spl which is 1.07. If somebody knows where to find it...
Thanks
Click to expand...
Click to collapse
Download any official WM5 ROM from htc, extract SPL from RUU_signed.nbh, then build a new nbh with only the SPL. To flash it don't use HSPL because it prevent to flash SPL, use SSPL instead...
PS : I'm at work now, so I can't provide you a file...

Thank you
I'm gone try to find out how to extract spl from a ROM
If you know how to do it I would be interested

aleetosimr said:
Thank you
I'm gone try to find out how to extract spl from a ROM
If you know how to do it I would be interested
Click to expand...
Click to collapse
Use Dutty nbhtools.
Bye

An easier way
Download SSPL from here:
http://forum.xda-developers.com/showthread.php?t=293632
Copy it to your device, and start it. Your device will be switched to bootloader mode.
Now you can flash it with the original offical rom, and everything (ipl+spl+os+radio) will be overwritten.
The bible:
http://trinityguides.info/index.php?option=com_content&task=view&id=29&Itemid=67

Super Sheep said:
Download any official WM5 ROM from htc, extract SPL from RUU_signed.nbh, then build a new nbh with only the SPL. To flash it don't use HSPL because it prevent to flash SPL, use SSPL instead...
PS : I'm at work now, so I can't provide you a file...
Click to expand...
Click to collapse
So...
here you can get custom RUU Updater :
http://forum.xda-developers.com/showpost.php?p=1144707&postcount=1
if you just need SSPL :
http://forum.xda-developers.com/showpost.php?p=1132634&postcount=1
and as attachment you can find the SPL alone in the RUU_signed.nbh

Thank you very much, that's a miracle!!!
I've been working on this for a week. Many people helped me but it never worked.
But your file was perfect and it eventually get me rid off this spl 9.99.
When I was just about to resign and to send the phone.
From which ROM did you extract this spl because I had flashed many of them and no one was allright?
Wathever thank you again for your help!!!

For me that dont work
I have too send my phone to repare !!
I need HELP please
thank's
" Pour moi ça n'a pas fonctionner j'ai toujours 1.30 olipro , meme avec ce proceder "
petitloup

petitloup said:
For me that dont work
I have too send my phone to repare !!
I need HELP please
thank's
" Pour moi ça n'a pas fonctionner j'ai toujours 1.30 olipro , meme avec ce proceder "
petitloup
Click to expand...
Click to collapse
http://trinityguides.info/index.php?option=com_content&task=view&id=29&Itemid=67

Thank's for everything it's okey now i am spl1.07
Petitloup

Rom update for a N00B

Hi Guys,
I have just found the (newest) ROM for my Mteor (RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar) But I dont have ANY experience flashing my device with new ROMs
Should I just install this ROM and see what happens or do I have to make some extra actions to get this ROM properly installed?
Could anyone please help me (in a N00B language) to get my device updated?
I saw that some versions of the IPL (?) en SPL (?) makes differences, but I don't know what versions I use. What versions of IPL and SPL should I have?
THNX!

the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!

futureshock said:
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
Click to expand...
Click to collapse
Alrighty!!!
I shall keep you informed about my progress. (first try to flash my device only using the original ROM)

I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!

DaLuca said:
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
Click to expand...
Click to collapse
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR

jerpelea said:
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!

DaLuca said:
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
Click to expand...
Click to collapse
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05

jerpelea said:
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
Click to expand...
Click to collapse
oh... hmm... okay... sorry! Thats why the topic-title is "Rom update for a N00B"
But thanks that you cleared this question.